source: trunk/src/declarative/util/qdeclarativetransitionmanager.cpp@ 1163

Last change on this file since 1163 was 846, checked in by Dmitry A. Kuminov, 15 years ago

trunk: Merged in qt 4.7.2 sources from branches/vendor/nokia/qt.
File size: 10.0 KB
Line 
1/****************************************************************************
2**
3** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
4** All rights reserved.
5** Contact: Nokia Corporation (qt-info@nokia.com)
6**
7** This file is part of the QtDeclarative module of the Qt Toolkit.
8**
9** $QT_BEGIN_LICENSE:LGPL$
10** Commercial Usage
11** Licensees holding valid Qt Commercial licenses may use this file in
12** accordance with the Qt Commercial License Agreement provided with the
13** Software or, alternatively, in accordance with the terms contained in
14** a written agreement between you and Nokia.
15**
16** GNU Lesser General Public License Usage
17** Alternatively, this file may be used under the terms of the GNU Lesser
18** General Public License version 2.1 as published by the Free Software
19** Foundation and appearing in the file LICENSE.LGPL included in the
20** packaging of this file. Please review the following information to
21** ensure the GNU Lesser General Public License version 2.1 requirements
22** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
23**
24** In addition, as a special exception, Nokia gives you certain additional
25** rights. These rights are described in the Nokia Qt LGPL Exception
26** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
27**
28** GNU General Public License Usage
29** Alternatively, this file may be used under the terms of the GNU
30** General Public License version 3.0 as published by the Free Software
31** Foundation and appearing in the file LICENSE.GPL included in the
32** packaging of this file. Please review the following information to
33** ensure the GNU General Public License version 3.0 requirements will be
34** met: http://www.gnu.org/copyleft/gpl.html.
35**
36** If you have questions regarding the use of this file, please contact
37** Nokia at qt-info@nokia.com.
38** $QT_END_LICENSE$
39**
40****************************************************************************/
41
42#include "private/qdeclarativetransitionmanager_p_p.h"
43
44#include "private/qdeclarativestate_p_p.h"
45#include "private/qdeclarativestate_p.h"
46
47#include <qdeclarativebinding_p.h>
48#include <qdeclarativeglobal_p.h>
49#include <qdeclarativeproperty_p.h>
50
51QT_BEGIN_NAMESPACE
52
53DEFINE_BOOL_CONFIG_OPTION(stateChangeDebug, STATECHANGE_DEBUG);
54
55class QDeclarativeTransitionManagerPrivate
56{
57public:
58 QDeclarativeTransitionManagerPrivate()
59 : state(0), transition(0) {}
60
61 void applyBindings();
62 typedef QList<QDeclarativeSimpleAction> SimpleActionList;
63 QDeclarativeState *state;
64 QDeclarativeTransition *transition;
65 QDeclarativeStateOperation::ActionList bindingsList;
66 SimpleActionList completeList;
67};
68
69QDeclarativeTransitionManager::QDeclarativeTransitionManager()
70: d(new QDeclarativeTransitionManagerPrivate)
71{
72}
73
74void QDeclarativeTransitionManager::setState(QDeclarativeState *s)
75{
76 d->state = s;
77}
78
79QDeclarativeTransitionManager::~QDeclarativeTransitionManager()
80{
81 delete d; d = 0;
82}
83
84void QDeclarativeTransitionManager::complete()
85{
86 d->applyBindings();
87
88 for (int ii = 0; ii < d->completeList.count(); ++ii) {
89 const QDeclarativeProperty &prop = d->completeList.at(ii).property();
90 prop.write(d->completeList.at(ii).value());
91 }
92
93 d->completeList.clear();
94
95 if (d->state)
96 static_cast<QDeclarativeStatePrivate*>(QObjectPrivate::get(d->state))->complete();
97}
98
99void QDeclarativeTransitionManagerPrivate::applyBindings()
100{
101 foreach(const QDeclarativeAction &action, bindingsList) {
102 if (!action.toBinding.isNull()) {
103 QDeclarativePropertyPrivate::setBinding(action.property, action.toBinding.data());
104 } else if (action.event) {
105 if (action.reverseEvent)
106 action.event->reverse();
107 else
108 action.event->execute();
109 }
110
111 }
112
113 bindingsList.clear();
114}
115
116void QDeclarativeTransitionManager::transition(const QList<QDeclarativeAction> &list,
117 QDeclarativeTransition *transition)
118{
119 cancel();
120
121 QDeclarativeStateOperation::ActionList applyList = list;
122 // Determine which actions are binding changes.
123 foreach(const QDeclarativeAction &action, applyList) {
124 if (action.toBinding)
125 d->bindingsList << action;
126 if (action.fromBinding)
127 QDeclarativePropertyPrivate::setBinding(action.property, 0); // Disable current binding
128 if (action.event && action.event->changesBindings()) { //### assume isReversable()?
129 d->bindingsList << action;
130 action.event->clearBindings();
131 }
132 }
133
134 // Animated transitions need both the start and the end value for
135 // each property change. In the presence of bindings, the end values
136 // are non-trivial to calculate. As a "best effort" attempt, we first
137 // apply all the property and binding changes, then read all the actual
138 // final values, then roll back the changes and proceed as normal.
139 //
140 // This doesn't catch everything, and it might be a little fragile in
141 // some cases - but whatcha going to do?
142
143 if (!d->bindingsList.isEmpty()) {
144
145 // Apply all the property and binding changes
146 for (int ii = 0; ii < applyList.size(); ++ii) {
147 const QDeclarativeAction &action = applyList.at(ii);
148 if (!action.toBinding.isNull()) {
149 QDeclarativePropertyPrivate::setBinding(action.property, action.toBinding.data(), QDeclarativePropertyPrivate::BypassInterceptor | QDeclarativePropertyPrivate::DontRemoveBinding);
150 } else if (!action.event) {
151 QDeclarativePropertyPrivate::write(action.property, action.toValue, QDeclarativePropertyPrivate::BypassInterceptor | QDeclarativePropertyPrivate::DontRemoveBinding);
152 } else if (action.event->isReversable()) {
153 if (action.reverseEvent)
154 action.event->reverse(QDeclarativeActionEvent::FastForward);
155 else
156 action.event->execute(QDeclarativeActionEvent::FastForward);
157 }
158 }
159
160 // Read all the end values for binding changes
161 for (int ii = 0; ii < applyList.size(); ++ii) {
162 QDeclarativeAction *action = &applyList[ii];
163 if (action->event) {
164 action->event->saveTargetValues();
165 continue;
166 }
167 const QDeclarativeProperty &prop = action->property;
168 if (!action->toBinding.isNull() || !action->toValue.isValid()) {
169 action->toValue = prop.read();
170 }
171 }
172
173 // Revert back to the original values
174 foreach(const QDeclarativeAction &action, applyList) {
175 if (action.event) {
176 if (action.event->isReversable()) {
177 action.event->clearBindings();
178 action.event->rewind();
179 action.event->clearBindings(); //### shouldn't be needed
180 }
181 continue;
182 }
183
184 if (action.toBinding)
185 QDeclarativePropertyPrivate::setBinding(action.property, 0); // Make sure this is disabled during the transition
186
187 QDeclarativePropertyPrivate::write(action.property, action.fromValue, QDeclarativePropertyPrivate::BypassInterceptor | QDeclarativePropertyPrivate::DontRemoveBinding);
188 }
189 }
190
191 if (transition) {
192 QList<QDeclarativeProperty> touched;
193 d->transition = transition;
194 d->transition->prepare(applyList, touched, this);
195
196 // Modify the action list to remove actions handled in the transition
197 for (int ii = 0; ii < applyList.count(); ++ii) {
198 const QDeclarativeAction &action = applyList.at(ii);
199
200 if (action.event) {
201
202 if (action.actionDone) {
203 applyList.removeAt(ii);
204 --ii;
205 }
206
207 } else {
208
209 if (touched.contains(action.property)) {
210 if (action.toValue != action.fromValue)
211 d->completeList <<
212 QDeclarativeSimpleAction(action, QDeclarativeSimpleAction::EndState);
213
214 applyList.removeAt(ii);
215 --ii;
216 }
217
218 }
219 }
220 }
221
222 // Any actions remaining have not been handled by the transition and should
223 // be applied immediately. We skip applying bindings, as they are all
224 // applied at the end in applyBindings() to avoid any nastiness mid
225 // transition
226 foreach(const QDeclarativeAction &action, applyList) {
227 if (action.event && !action.event->changesBindings()) {
228 if (action.event->isReversable() && action.reverseEvent)
229 action.event->reverse();
230 else
231 action.event->execute();
232 } else if (!action.event && !action.toBinding) {
233 action.property.write(action.toValue);
234 }
235 }
236#ifndef QT_NO_DEBUG_STREAM
237 if (stateChangeDebug()) {
238 foreach(const QDeclarativeAction &action, applyList) {
239 if (action.event)
240 qWarning() << " No transition for event:" << action.event->typeName();
241 else
242 qWarning() << " No transition for:" << action.property.object()
243 << action.property.name() << "From:" << action.fromValue
244 << "To:" << action.toValue;
245 }
246 }
247#endif
248 if (!transition)
249 d->applyBindings();
250}
251
252void QDeclarativeTransitionManager::cancel()
253{
254 if (d->transition) {
255 // ### this could potentially trigger a complete in rare circumstances
256 d->transition->stop();
257 d->transition = 0;
258 }
259
260 for(int i = 0; i < d->bindingsList.count(); ++i) {
261 QDeclarativeAction action = d->bindingsList[i];
262 if (!action.toBinding.isNull() && action.deletableToBinding) {
263 QDeclarativePropertyPrivate::setBinding(action.property, 0);
264 action.toBinding.data()->destroy();
265 action.toBinding.clear();
266 action.deletableToBinding = false;
267 } else if (action.event) {
268 //### what do we do here?
269 }
270
271 }
272 d->bindingsList.clear();
273 d->completeList.clear();
274}
275
276QT_END_NAMESPACE
Note: See TracBrowser for help on using the repository browser.