| 1 | /* | 
|---|
| 2 | * jdmerge.c | 
|---|
| 3 | * | 
|---|
| 4 | * Copyright (C) 1994-1996, Thomas G. Lane. | 
|---|
| 5 | * This file is part of the Independent JPEG Group's software. | 
|---|
| 6 | * For conditions of distribution and use, see the accompanying README file. | 
|---|
| 7 | * | 
|---|
| 8 | * This file contains code for merged upsampling/color conversion. | 
|---|
| 9 | * | 
|---|
| 10 | * This file combines functions from jdsample.c and jdcolor.c; | 
|---|
| 11 | * read those files first to understand what's going on. | 
|---|
| 12 | * | 
|---|
| 13 | * When the chroma components are to be upsampled by simple replication | 
|---|
| 14 | * (ie, box filtering), we can save some work in color conversion by | 
|---|
| 15 | * calculating all the output pixels corresponding to a pair of chroma | 
|---|
| 16 | * samples at one time.  In the conversion equations | 
|---|
| 17 | *      R = Y           + K1 * Cr | 
|---|
| 18 | *      G = Y + K2 * Cb + K3 * Cr | 
|---|
| 19 | *      B = Y + K4 * Cb | 
|---|
| 20 | * only the Y term varies among the group of pixels corresponding to a pair | 
|---|
| 21 | * of chroma samples, so the rest of the terms can be calculated just once. | 
|---|
| 22 | * At typical sampling ratios, this eliminates half or three-quarters of the | 
|---|
| 23 | * multiplications needed for color conversion. | 
|---|
| 24 | * | 
|---|
| 25 | * This file currently provides implementations for the following cases: | 
|---|
| 26 | *      YCbCr => RGB color conversion only. | 
|---|
| 27 | *      Sampling ratios of 2h1v or 2h2v. | 
|---|
| 28 | *      No scaling needed at upsample time. | 
|---|
| 29 | *      Corner-aligned (non-CCIR601) sampling alignment. | 
|---|
| 30 | * Other special cases could be added, but in most applications these are | 
|---|
| 31 | * the only common cases.  (For uncommon cases we fall back on the more | 
|---|
| 32 | * general code in jdsample.c and jdcolor.c.) | 
|---|
| 33 | */ | 
|---|
| 34 |  | 
|---|
| 35 | #define JPEG_INTERNALS | 
|---|
| 36 | #include "jinclude.h" | 
|---|
| 37 | #include "jpeglib.h" | 
|---|
| 38 |  | 
|---|
| 39 | #ifdef UPSAMPLE_MERGING_SUPPORTED | 
|---|
| 40 |  | 
|---|
| 41 |  | 
|---|
| 42 | /* Private subobject */ | 
|---|
| 43 |  | 
|---|
| 44 | typedef struct { | 
|---|
| 45 | struct jpeg_upsampler pub;    /* public fields */ | 
|---|
| 46 |  | 
|---|
| 47 | /* Pointer to routine to do actual upsampling/conversion of one row group */ | 
|---|
| 48 | JMETHOD(void, upmethod, (j_decompress_ptr cinfo, | 
|---|
| 49 | JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, | 
|---|
| 50 | JSAMPARRAY output_buf)); | 
|---|
| 51 |  | 
|---|
| 52 | /* Private state for YCC->RGB conversion */ | 
|---|
| 53 | int * Cr_r_tab;               /* => table for Cr to R conversion */ | 
|---|
| 54 | int * Cb_b_tab;               /* => table for Cb to B conversion */ | 
|---|
| 55 | INT32 * Cr_g_tab;             /* => table for Cr to G conversion */ | 
|---|
| 56 | INT32 * Cb_g_tab;             /* => table for Cb to G conversion */ | 
|---|
| 57 |  | 
|---|
| 58 | /* For 2:1 vertical sampling, we produce two output rows at a time. | 
|---|
| 59 | * We need a "spare" row buffer to hold the second output row if the | 
|---|
| 60 | * application provides just a one-row buffer; we also use the spare | 
|---|
| 61 | * to discard the dummy last row if the image height is odd. | 
|---|
| 62 | */ | 
|---|
| 63 | JSAMPROW spare_row; | 
|---|
| 64 | boolean spare_full;           /* T if spare buffer is occupied */ | 
|---|
| 65 |  | 
|---|
| 66 | JDIMENSION out_row_width;     /* samples per output row */ | 
|---|
| 67 | JDIMENSION rows_to_go;        /* counts rows remaining in image */ | 
|---|
| 68 | } my_upsampler; | 
|---|
| 69 |  | 
|---|
| 70 | typedef my_upsampler * my_upsample_ptr; | 
|---|
| 71 |  | 
|---|
| 72 | #define SCALEBITS       16      /* speediest right-shift on some machines */ | 
|---|
| 73 | #define ONE_HALF        ((INT32) 1 << (SCALEBITS-1)) | 
|---|
| 74 | #define FIX(x)          ((INT32) ((x) * (1L<<SCALEBITS) + 0.5)) | 
|---|
| 75 |  | 
|---|
| 76 |  | 
|---|
| 77 | /* | 
|---|
| 78 | * Initialize tables for YCC->RGB colorspace conversion. | 
|---|
| 79 | * This is taken directly from jdcolor.c; see that file for more info. | 
|---|
| 80 | */ | 
|---|
| 81 |  | 
|---|
| 82 | LOCAL(void) | 
|---|
| 83 | build_ycc_rgb_table (j_decompress_ptr cinfo) | 
|---|
| 84 | { | 
|---|
| 85 | my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; | 
|---|
| 86 | int i; | 
|---|
| 87 | INT32 x; | 
|---|
| 88 | SHIFT_TEMPS | 
|---|
| 89 |  | 
|---|
| 90 | upsample->Cr_r_tab = (int *) | 
|---|
| 91 | (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, | 
|---|
| 92 | (MAXJSAMPLE+1) * SIZEOF(int)); | 
|---|
| 93 | upsample->Cb_b_tab = (int *) | 
|---|
| 94 | (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, | 
|---|
| 95 | (MAXJSAMPLE+1) * SIZEOF(int)); | 
|---|
| 96 | upsample->Cr_g_tab = (INT32 *) | 
|---|
| 97 | (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, | 
|---|
| 98 | (MAXJSAMPLE+1) * SIZEOF(INT32)); | 
|---|
| 99 | upsample->Cb_g_tab = (INT32 *) | 
|---|
| 100 | (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, | 
|---|
| 101 | (MAXJSAMPLE+1) * SIZEOF(INT32)); | 
|---|
| 102 |  | 
|---|
| 103 | for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { | 
|---|
| 104 | /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ | 
|---|
| 105 | /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ | 
|---|
| 106 | /* Cr=>R value is nearest int to 1.40200 * x */ | 
|---|
| 107 | upsample->Cr_r_tab[i] = (int) | 
|---|
| 108 | RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); | 
|---|
| 109 | /* Cb=>B value is nearest int to 1.77200 * x */ | 
|---|
| 110 | upsample->Cb_b_tab[i] = (int) | 
|---|
| 111 | RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); | 
|---|
| 112 | /* Cr=>G value is scaled-up -0.71414 * x */ | 
|---|
| 113 | upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x; | 
|---|
| 114 | /* Cb=>G value is scaled-up -0.34414 * x */ | 
|---|
| 115 | /* We also add in ONE_HALF so that need not do it in inner loop */ | 
|---|
| 116 | upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; | 
|---|
| 117 | } | 
|---|
| 118 | } | 
|---|
| 119 |  | 
|---|
| 120 |  | 
|---|
| 121 | /* | 
|---|
| 122 | * Initialize for an upsampling pass. | 
|---|
| 123 | */ | 
|---|
| 124 |  | 
|---|
| 125 | METHODDEF(void) | 
|---|
| 126 | start_pass_merged_upsample (j_decompress_ptr cinfo) | 
|---|
| 127 | { | 
|---|
| 128 | my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; | 
|---|
| 129 |  | 
|---|
| 130 | /* Mark the spare buffer empty */ | 
|---|
| 131 | upsample->spare_full = FALSE; | 
|---|
| 132 | /* Initialize total-height counter for detecting bottom of image */ | 
|---|
| 133 | upsample->rows_to_go = cinfo->output_height; | 
|---|
| 134 | } | 
|---|
| 135 |  | 
|---|
| 136 |  | 
|---|
| 137 | /* | 
|---|
| 138 | * Control routine to do upsampling (and color conversion). | 
|---|
| 139 | * | 
|---|
| 140 | * The control routine just handles the row buffering considerations. | 
|---|
| 141 | */ | 
|---|
| 142 |  | 
|---|
| 143 | METHODDEF(void) | 
|---|
| 144 | merged_2v_upsample (j_decompress_ptr cinfo, | 
|---|
| 145 | JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, | 
|---|
| 146 | JDIMENSION in_row_groups_avail, | 
|---|
| 147 | JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, | 
|---|
| 148 | JDIMENSION out_rows_avail) | 
|---|
| 149 | /* 2:1 vertical sampling case: may need a spare row. */ | 
|---|
| 150 | { | 
|---|
| 151 | my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; | 
|---|
| 152 | JSAMPROW work_ptrs[2]; | 
|---|
| 153 | JDIMENSION num_rows;          /* number of rows returned to caller */ | 
|---|
| 154 |  | 
|---|
| 155 | if (upsample->spare_full) { | 
|---|
| 156 | /* If we have a spare row saved from a previous cycle, just return it. */ | 
|---|
| 157 | jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0, | 
|---|
| 158 | 1, upsample->out_row_width); | 
|---|
| 159 | num_rows = 1; | 
|---|
| 160 | upsample->spare_full = FALSE; | 
|---|
| 161 | } else { | 
|---|
| 162 | /* Figure number of rows to return to caller. */ | 
|---|
| 163 | num_rows = 2; | 
|---|
| 164 | /* Not more than the distance to the end of the image. */ | 
|---|
| 165 | if (num_rows > upsample->rows_to_go) | 
|---|
| 166 | num_rows = upsample->rows_to_go; | 
|---|
| 167 | /* And not more than what the client can accept: */ | 
|---|
| 168 | out_rows_avail -= *out_row_ctr; | 
|---|
| 169 | if (num_rows > out_rows_avail) | 
|---|
| 170 | num_rows = out_rows_avail; | 
|---|
| 171 | /* Create output pointer array for upsampler. */ | 
|---|
| 172 | work_ptrs[0] = output_buf[*out_row_ctr]; | 
|---|
| 173 | if (num_rows > 1) { | 
|---|
| 174 | work_ptrs[1] = output_buf[*out_row_ctr + 1]; | 
|---|
| 175 | } else { | 
|---|
| 176 | work_ptrs[1] = upsample->spare_row; | 
|---|
| 177 | upsample->spare_full = TRUE; | 
|---|
| 178 | } | 
|---|
| 179 | /* Now do the upsampling. */ | 
|---|
| 180 | (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs); | 
|---|
| 181 | } | 
|---|
| 182 |  | 
|---|
| 183 | /* Adjust counts */ | 
|---|
| 184 | *out_row_ctr += num_rows; | 
|---|
| 185 | upsample->rows_to_go -= num_rows; | 
|---|
| 186 | /* When the buffer is emptied, declare this input row group consumed */ | 
|---|
| 187 | if (! upsample->spare_full) | 
|---|
| 188 | (*in_row_group_ctr)++; | 
|---|
| 189 | } | 
|---|
| 190 |  | 
|---|
| 191 |  | 
|---|
| 192 | METHODDEF(void) | 
|---|
| 193 | merged_1v_upsample (j_decompress_ptr cinfo, | 
|---|
| 194 | JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, | 
|---|
| 195 | JDIMENSION in_row_groups_avail, | 
|---|
| 196 | JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, | 
|---|
| 197 | JDIMENSION out_rows_avail) | 
|---|
| 198 | /* 1:1 vertical sampling case: much easier, never need a spare row. */ | 
|---|
| 199 | { | 
|---|
| 200 | my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; | 
|---|
| 201 |  | 
|---|
| 202 | /* Just do the upsampling. */ | 
|---|
| 203 | (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, | 
|---|
| 204 | output_buf + *out_row_ctr); | 
|---|
| 205 | /* Adjust counts */ | 
|---|
| 206 | (*out_row_ctr)++; | 
|---|
| 207 | (*in_row_group_ctr)++; | 
|---|
| 208 | } | 
|---|
| 209 |  | 
|---|
| 210 |  | 
|---|
| 211 | /* | 
|---|
| 212 | * These are the routines invoked by the control routines to do | 
|---|
| 213 | * the actual upsampling/conversion.  One row group is processed per call. | 
|---|
| 214 | * | 
|---|
| 215 | * Note: since we may be writing directly into application-supplied buffers, | 
|---|
| 216 | * we have to be honest about the output width; we can't assume the buffer | 
|---|
| 217 | * has been rounded up to an even width. | 
|---|
| 218 | */ | 
|---|
| 219 |  | 
|---|
| 220 |  | 
|---|
| 221 | /* | 
|---|
| 222 | * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical. | 
|---|
| 223 | */ | 
|---|
| 224 |  | 
|---|
| 225 | METHODDEF(void) | 
|---|
| 226 | h2v1_merged_upsample (j_decompress_ptr cinfo, | 
|---|
| 227 | JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, | 
|---|
| 228 | JSAMPARRAY output_buf) | 
|---|
| 229 | { | 
|---|
| 230 | my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; | 
|---|
| 231 | register int y, cred, cgreen, cblue; | 
|---|
| 232 | int cb, cr; | 
|---|
| 233 | register JSAMPROW outptr; | 
|---|
| 234 | JSAMPROW inptr0, inptr1, inptr2; | 
|---|
| 235 | JDIMENSION col; | 
|---|
| 236 | /* copy these pointers into registers if possible */ | 
|---|
| 237 | register JSAMPLE * range_limit = cinfo->sample_range_limit; | 
|---|
| 238 | int * Crrtab = upsample->Cr_r_tab; | 
|---|
| 239 | int * Cbbtab = upsample->Cb_b_tab; | 
|---|
| 240 | INT32 * Crgtab = upsample->Cr_g_tab; | 
|---|
| 241 | INT32 * Cbgtab = upsample->Cb_g_tab; | 
|---|
| 242 | SHIFT_TEMPS | 
|---|
| 243 |  | 
|---|
| 244 | inptr0 = input_buf[0][in_row_group_ctr]; | 
|---|
| 245 | inptr1 = input_buf[1][in_row_group_ctr]; | 
|---|
| 246 | inptr2 = input_buf[2][in_row_group_ctr]; | 
|---|
| 247 | outptr = output_buf[0]; | 
|---|
| 248 | /* Loop for each pair of output pixels */ | 
|---|
| 249 | for (col = cinfo->output_width >> 1; col > 0; col--) { | 
|---|
| 250 | /* Do the chroma part of the calculation */ | 
|---|
| 251 | cb = GETJSAMPLE(*inptr1++); | 
|---|
| 252 | cr = GETJSAMPLE(*inptr2++); | 
|---|
| 253 | cred = Crrtab[cr]; | 
|---|
| 254 | cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); | 
|---|
| 255 | cblue = Cbbtab[cb]; | 
|---|
| 256 | /* Fetch 2 Y values and emit 2 pixels */ | 
|---|
| 257 | y  = GETJSAMPLE(*inptr0++); | 
|---|
| 258 | outptr[RGB_RED] =   range_limit[y + cred]; | 
|---|
| 259 | outptr[RGB_GREEN] = range_limit[y + cgreen]; | 
|---|
| 260 | outptr[RGB_BLUE] =  range_limit[y + cblue]; | 
|---|
| 261 | outptr += RGB_PIXELSIZE; | 
|---|
| 262 | y  = GETJSAMPLE(*inptr0++); | 
|---|
| 263 | outptr[RGB_RED] =   range_limit[y + cred]; | 
|---|
| 264 | outptr[RGB_GREEN] = range_limit[y + cgreen]; | 
|---|
| 265 | outptr[RGB_BLUE] =  range_limit[y + cblue]; | 
|---|
| 266 | outptr += RGB_PIXELSIZE; | 
|---|
| 267 | } | 
|---|
| 268 | /* If image width is odd, do the last output column separately */ | 
|---|
| 269 | if (cinfo->output_width & 1) { | 
|---|
| 270 | cb = GETJSAMPLE(*inptr1); | 
|---|
| 271 | cr = GETJSAMPLE(*inptr2); | 
|---|
| 272 | cred = Crrtab[cr]; | 
|---|
| 273 | cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); | 
|---|
| 274 | cblue = Cbbtab[cb]; | 
|---|
| 275 | y  = GETJSAMPLE(*inptr0); | 
|---|
| 276 | outptr[RGB_RED] =   range_limit[y + cred]; | 
|---|
| 277 | outptr[RGB_GREEN] = range_limit[y + cgreen]; | 
|---|
| 278 | outptr[RGB_BLUE] =  range_limit[y + cblue]; | 
|---|
| 279 | } | 
|---|
| 280 | } | 
|---|
| 281 |  | 
|---|
| 282 |  | 
|---|
| 283 | /* | 
|---|
| 284 | * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical. | 
|---|
| 285 | */ | 
|---|
| 286 |  | 
|---|
| 287 | METHODDEF(void) | 
|---|
| 288 | h2v2_merged_upsample (j_decompress_ptr cinfo, | 
|---|
| 289 | JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, | 
|---|
| 290 | JSAMPARRAY output_buf) | 
|---|
| 291 | { | 
|---|
| 292 | my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; | 
|---|
| 293 | register int y, cred, cgreen, cblue; | 
|---|
| 294 | int cb, cr; | 
|---|
| 295 | register JSAMPROW outptr0, outptr1; | 
|---|
| 296 | JSAMPROW inptr00, inptr01, inptr1, inptr2; | 
|---|
| 297 | JDIMENSION col; | 
|---|
| 298 | /* copy these pointers into registers if possible */ | 
|---|
| 299 | register JSAMPLE * range_limit = cinfo->sample_range_limit; | 
|---|
| 300 | int * Crrtab = upsample->Cr_r_tab; | 
|---|
| 301 | int * Cbbtab = upsample->Cb_b_tab; | 
|---|
| 302 | INT32 * Crgtab = upsample->Cr_g_tab; | 
|---|
| 303 | INT32 * Cbgtab = upsample->Cb_g_tab; | 
|---|
| 304 | SHIFT_TEMPS | 
|---|
| 305 |  | 
|---|
| 306 | inptr00 = input_buf[0][in_row_group_ctr*2]; | 
|---|
| 307 | inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; | 
|---|
| 308 | inptr1 = input_buf[1][in_row_group_ctr]; | 
|---|
| 309 | inptr2 = input_buf[2][in_row_group_ctr]; | 
|---|
| 310 | outptr0 = output_buf[0]; | 
|---|
| 311 | outptr1 = output_buf[1]; | 
|---|
| 312 | /* Loop for each group of output pixels */ | 
|---|
| 313 | for (col = cinfo->output_width >> 1; col > 0; col--) { | 
|---|
| 314 | /* Do the chroma part of the calculation */ | 
|---|
| 315 | cb = GETJSAMPLE(*inptr1++); | 
|---|
| 316 | cr = GETJSAMPLE(*inptr2++); | 
|---|
| 317 | cred = Crrtab[cr]; | 
|---|
| 318 | cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); | 
|---|
| 319 | cblue = Cbbtab[cb]; | 
|---|
| 320 | /* Fetch 4 Y values and emit 4 pixels */ | 
|---|
| 321 | y  = GETJSAMPLE(*inptr00++); | 
|---|
| 322 | outptr0[RGB_RED] =   range_limit[y + cred]; | 
|---|
| 323 | outptr0[RGB_GREEN] = range_limit[y + cgreen]; | 
|---|
| 324 | outptr0[RGB_BLUE] =  range_limit[y + cblue]; | 
|---|
| 325 | outptr0 += RGB_PIXELSIZE; | 
|---|
| 326 | y  = GETJSAMPLE(*inptr00++); | 
|---|
| 327 | outptr0[RGB_RED] =   range_limit[y + cred]; | 
|---|
| 328 | outptr0[RGB_GREEN] = range_limit[y + cgreen]; | 
|---|
| 329 | outptr0[RGB_BLUE] =  range_limit[y + cblue]; | 
|---|
| 330 | outptr0 += RGB_PIXELSIZE; | 
|---|
| 331 | y  = GETJSAMPLE(*inptr01++); | 
|---|
| 332 | outptr1[RGB_RED] =   range_limit[y + cred]; | 
|---|
| 333 | outptr1[RGB_GREEN] = range_limit[y + cgreen]; | 
|---|
| 334 | outptr1[RGB_BLUE] =  range_limit[y + cblue]; | 
|---|
| 335 | outptr1 += RGB_PIXELSIZE; | 
|---|
| 336 | y  = GETJSAMPLE(*inptr01++); | 
|---|
| 337 | outptr1[RGB_RED] =   range_limit[y + cred]; | 
|---|
| 338 | outptr1[RGB_GREEN] = range_limit[y + cgreen]; | 
|---|
| 339 | outptr1[RGB_BLUE] =  range_limit[y + cblue]; | 
|---|
| 340 | outptr1 += RGB_PIXELSIZE; | 
|---|
| 341 | } | 
|---|
| 342 | /* If image width is odd, do the last output column separately */ | 
|---|
| 343 | if (cinfo->output_width & 1) { | 
|---|
| 344 | cb = GETJSAMPLE(*inptr1); | 
|---|
| 345 | cr = GETJSAMPLE(*inptr2); | 
|---|
| 346 | cred = Crrtab[cr]; | 
|---|
| 347 | cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); | 
|---|
| 348 | cblue = Cbbtab[cb]; | 
|---|
| 349 | y  = GETJSAMPLE(*inptr00); | 
|---|
| 350 | outptr0[RGB_RED] =   range_limit[y + cred]; | 
|---|
| 351 | outptr0[RGB_GREEN] = range_limit[y + cgreen]; | 
|---|
| 352 | outptr0[RGB_BLUE] =  range_limit[y + cblue]; | 
|---|
| 353 | y  = GETJSAMPLE(*inptr01); | 
|---|
| 354 | outptr1[RGB_RED] =   range_limit[y + cred]; | 
|---|
| 355 | outptr1[RGB_GREEN] = range_limit[y + cgreen]; | 
|---|
| 356 | outptr1[RGB_BLUE] =  range_limit[y + cblue]; | 
|---|
| 357 | } | 
|---|
| 358 | } | 
|---|
| 359 |  | 
|---|
| 360 |  | 
|---|
| 361 | /* | 
|---|
| 362 | * Module initialization routine for merged upsampling/color conversion. | 
|---|
| 363 | * | 
|---|
| 364 | * NB: this is called under the conditions determined by use_merged_upsample() | 
|---|
| 365 | * in jdmaster.c.  That routine MUST correspond to the actual capabilities | 
|---|
| 366 | * of this module; no safety checks are made here. | 
|---|
| 367 | */ | 
|---|
| 368 |  | 
|---|
| 369 | GLOBAL(void) | 
|---|
| 370 | jinit_merged_upsampler (j_decompress_ptr cinfo) | 
|---|
| 371 | { | 
|---|
| 372 | my_upsample_ptr upsample; | 
|---|
| 373 |  | 
|---|
| 374 | upsample = (my_upsample_ptr) | 
|---|
| 375 | (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, | 
|---|
| 376 | SIZEOF(my_upsampler)); | 
|---|
| 377 | cinfo->upsample = (struct jpeg_upsampler *) upsample; | 
|---|
| 378 | upsample->pub.start_pass = start_pass_merged_upsample; | 
|---|
| 379 | upsample->pub.need_context_rows = FALSE; | 
|---|
| 380 |  | 
|---|
| 381 | upsample->out_row_width = cinfo->output_width * cinfo->out_color_components; | 
|---|
| 382 |  | 
|---|
| 383 | if (cinfo->max_v_samp_factor == 2) { | 
|---|
| 384 | upsample->pub.upsample = merged_2v_upsample; | 
|---|
| 385 | upsample->upmethod = h2v2_merged_upsample; | 
|---|
| 386 | /* Allocate a spare row buffer */ | 
|---|
| 387 | upsample->spare_row = (JSAMPROW) | 
|---|
| 388 | (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, | 
|---|
| 389 | (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE))); | 
|---|
| 390 | } else { | 
|---|
| 391 | upsample->pub.upsample = merged_1v_upsample; | 
|---|
| 392 | upsample->upmethod = h2v1_merged_upsample; | 
|---|
| 393 | /* No spare row needed */ | 
|---|
| 394 | upsample->spare_row = NULL; | 
|---|
| 395 | } | 
|---|
| 396 |  | 
|---|
| 397 | build_ycc_rgb_table(cinfo); | 
|---|
| 398 | } | 
|---|
| 399 |  | 
|---|
| 400 | #endif /* UPSAMPLE_MERGING_SUPPORTED */ | 
|---|