source: trunk/doc/src/qt4-tulip.qdoc@ 432

/****************************************************************************
**
** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
** Contact: Qt Software Information (qt-info@nokia.com)
**
** This file is part of the documentation of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** Commercial Usage
** Licensees holding valid Qt Commercial licenses may use this file in
** accordance with the Qt Commercial License Agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and Nokia.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain
** additional rights. These rights are described in the Nokia Qt LGPL
** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
** package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
** If you are unsure which license is appropriate for your use, please
** contact the sales department at qt-sales@nokia.com.
** $QT_END_LICENSE$
**
****************************************************************************/

/*!
    \page qt4-tulip.html
    \title The Tulip Container Classes

    \contentspage {What's New in Qt 4}{Home}
    \previouspage What's New in Qt 4
    \nextpage The Interview Framework

    Qt 4 introduces a new set of containers that supersede both the old
    QCollection pointer-based containers and the newer QTL value-based
    containers.

    \tableofcontents

    \section1 General Overview

    The Tulip containers are similar to Qt 3's QTL containers
    (QValueList, QValueVector, QMap), but have the following
    advantages:

    \list
    \o The containers provide new iterators with a nicer, less
       error-prone syntax than STL, inspired by Java's iterators. (The
       STL-style iterators are still available as a lightweight,
       STL-compatible alternative.)

    \o The containers have been optimized for minimal code expansion.

    \o An empty container performs no memory allocation, and only
       requires the same space as a pointer.

    \o Even though they are implicitly shared, they can safely be copied
       across different threads without formality. There's no need to use
       \c QDeepCopy.
    \endlist

    Tulip provides the following sequential containers: QList,
    QLinkedList, QVector, QStack, and QQueue. For most
    applications, QList is the best type to use. Although it is
    implemented as an array-list, it provides very fast prepends and
    appends. If you really need a linked-list, use QLinkedList; if you
    want your items to occupy consecutive memory locations, use QVector.
    QStack and QQueue are convenience classes that provide LIFO and
    FIFO semantics.

    Tulip also provides these associative containers: QMap,
    QMultiMap, QHash, QMultiHash, and QSet. The "Multi" containers
    conveniently support multiple values associated with a single
    key. The "Hash" containers provide faster lookup by using a hash
    function instead of a binary search on a sorted set.

    The Tulip containers support the \l foreach keyword, a Qt-specific
    addition to the C++ language that is implemented using the standard
    C++ preprocessor. The syntax is:

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 0

    Example:

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 1

    The iterator variable can also be defined outside the loop. For
    example:

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 2

    Just like standard \c for loops, foreach supports braces, \c
    break, \c continue, and nested loops. Qt makes a copy of the
    container when it enters the loop. If you modify the container as
    you are iterating, that won't affect the loop.

    For details about the new containers, see the
    \l{Generic Containers} and \l{Generic Algorithms} overview documents.

    In addition to the new containers, considerable work has also gone into
    QByteArray and QString. The Qt 3 QCString class has been
    merged with QByteArray. The new QByteArray automatically provides
    a '\0' terminator after the last character. For example, the byte array
    of size 5 containing "abcde" has a null byte at position 5 (one past
    the end). This solves all the typical problems that occurred in Qt 3
    with conversions between QByteArray and QCString.

    To avoid crashes, QByteArray::data() never returns a null
    pointer. Furthermore, the distinction between null and empty
    strings has been watered down so that \c{QByteArray() ==
    QByteArray("")} and \c{QString() == QString("")}.

    \section1 Examples

    The first group of examples show how to use the new Java-style
    iterators. The main difference between the Java-style iterators and the
    STL-style iterators is that the Java-style ones point between items (or
    before the first item, or after the last item), whereas the STL ones
    point at an item (or past the last item). One advantage of the
    Java-style iterators is that iterating forward and backward are
    symmetric operations.

    Traversing a container using a Java-style iterator:

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 3

    Modifying items using a Java-style iterator:

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 4

    Removing items using a Java-style iterator:

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 5

    Iterating over items with a particular value using STL-style vs.
    Java-style iterators:

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 6

    Modifying and removing items using STL-style vs. Java-style
    iterators:

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 7

    The next group of examples show the API of the container classes
    themselves. The API is similar to the QTL classes of Qt 3, but is nicer
    in many respects.

    Iterating over a QList using an index (which is fast even for large
    lists, because QList is implemented as an array-list):

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 8

    Retrieving a value from a map, using a default value if the key
    doesn't exist:

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 9

    Getting all the values for a particular key in a QMultiMap or QMultiHash:

    \snippet doc/src/snippets/code/doc_src_qt4-tulip.qdoc 10

    \section1 Comparison with Qt 3

    Tulip containers are value based. If you want to store a list where
    each item is a QWidget *, use QList<QWidget *>.

    The new containers do not support auto-delete. In practice, we
    discovered that the only case where auto-delete proved worthwhile was
    when the data really should be stored as a value rather than as a
    pointer (e.g., QList<int> rather than QList<int *>). If you need
    to delete all the items in a container, use qDeleteAll().

    If you use QValueList in Qt 3, you can replace it with either
    QList or QLinkedList in Qt 4. In most cases, QList is the best
    choice: It is typically faster, results in less code in your
    executable, and requires less memory. However, QLinkedList's
    iterators provide stronger guarantees, and only QLinkedList provides
    constant-time insertions in the middle, which can make a difference for
    lists with thousands of items.

    If you use QValueVector or QMap in Qt 3, the corresponding Qt 4
    classes (QVector, QMap) are very similar to use.
*/