source: trunk/src/win32k/test/dh.asm@ 10367

Last change on this file since 10367 was 3829, checked in by bird, 25 years ago

Early development.
File size: 16.3 KB
Line 
1; $Id: dh.asm,v 1.1 2000-07-16 22:18:13 bird Exp $
2;
3; Device Helper Router.
4; Stack Thunker.
5;
6; Copyright (c) 2000 knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
7;
8; Project Odin Software License can be found in LICENSE.TXT
9;
10 .386
11
12
13;
14; Include files
15;
16 include devsegdf.inc
17 include devhlp.inc
18
19
20;
21; Exported symbols
22;
23 public ThunkStack16To32
24 public ThunkStack32To16
25 public TKSSBase
26 public getDHRouterFarPtr
27 ;public DHRouter
28
29
30;
31; extrns
32;
33 extrn DOS32ALLOCMEM:PROC
34 extrn DOS32FREEMEM:PROC
35 extrn DOS16GETINFOSEG:PROC
36 extrn _Device_Help:DWORD
37 extrn pulTKSSBase32:DWORD
38 extrn _TKSSBase16:DWORD
39 extrn _R0FlatCS16:WORD
40 extrn _R0FlatDS16:WORD
41
42
43
44
45CODE16 SEGMENT
46 ASSUME cs:CODE16, ds:FLAT
47
48
49
50;;
51; Devhelp routiner routine.
52; @cproto none
53; @param dl Devhelper routine.
54; @uses none but the ones returned.
55; @sketch
56; @status
57; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
58; @remark
59DHRouter PROC FAR
60 ASSUME cs:CODE16, ds:NOTHING, es:NOTHING, ss:NOTHING
61 ;
62 ; Preserve nearly everything (as a start)
63 ;
64 push ds
65 push es
66 push fs
67 push gs
68 push edi
69 push esi
70 push ebp
71 push edx
72 push ecx
73 push ebx
74
75 cmp dl, DevHlp_VirtToLin
76 jne dhr1
77 call dh_VirtToLin
78 jmp dhr_ret
79
80dhr1:
81 cmp dl, DevHlp_VMAlloc
82 jne dhr2
83 call dh_VMAlloc
84 jmp dhr_ret
85
86dhr2:
87 cmp dl, DevHlp_VMFree
88 jne dhr3
89 call dh_VMFree
90 jmp dhr_ret
91
92dhr3:
93 cmp dl, DevHlp_GetDOSVar
94 jne dhr4
95 call dh_GetDOSVar
96 add sp, 4 ; remove ebx from stack
97 jmp dhr_ret_ebx
98
99dhr4:
100 cmp dl, DevHlp_VMLock
101 jne dhr5
102 call dh_VMLock
103 jmp dhr_ret
104
105dhr5:
106 cmp dl, DevHlp_VMUnlock
107 jne dhr6
108 call dh_VMUnlock
109 jmp dhr_ret
110
111dhr6:
112
113dhr_notimplemented:
114 stc
115 mov eax, 87 ;ERROR_INVALID_PARAMETER
116
117 ;
118 ; Restore nearly everything (as a start)
119 ;
120dhr_ret:
121 pop ebx
122dhr_ret_ebx:
123 pop ecx
124 pop edx
125 pop ebp
126 pop esi
127 pop edi
128 pop gs
129 pop fs
130 pop es
131 pop ds
132 ret
133DHRouter ENDP
134
135
136
137
138
139;;
140; Converts a virtual (sel:off) address to a linear address.
141; @cproto none
142; @param AX Selector
143; @param ESI Offset
144; @param DL DevHelp_VirtToLin
145; @returns Success:
146; CF clear
147; EAX Linear address
148;
149; Failure:
150; CF set
151; EAX Error code.
152;
153; @uses eax
154; @status completely impelemented.
155; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
156dh_VirtToLin PROC NEAR
157 ASSUME cs:CODE16, ds:NOTHING, es:NOTHING, ss:NOTHING
158 shl eax, SEL_FLAT_SHIFT
159 and eax, SEL_FLATMASK
160 add eax, esi
161vtl_retok:
162 clc
163 ret
164
165vtl_reterr:
166 stc
167 ret
168dh_VirtToLin ENDP
169
170
171
172
173;;
174; Allocates virtual memory.
175; @cproto none
176; @param ECX Amount of memory to allocate.
177; @param EDI Pointer to DD var containing physical address to be mapped.
178; -1 if not used.
179; @param EAX Flags. These flags are supported:
180; VMDHA_SWAP
181; VMDHA_USEHIGHMEM
182; VMDHA_RESERVE
183; @param DH DevHlp_VMAlloc
184;
185; @returns Success:
186; CF Clear
187; EAX Linear address of object.
188;
189; Failure:
190; CF Set.
191; EAX Error code. ERROR_INVALID_PARAMETER.
192;
193; @uses edx, ecx, eax
194; @equiv
195; @time
196; @sketch For it into an call to DosAllocMem
197; @status
198; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
199; @remark
200dh_VMAlloc PROC NEAR
201 ASSUME cs:CODE16, ds:NOTHING, es:NOTHING, ss:NOTHING
202
203; define the flags which are used here
204VMDHA_SWAP EQU 0004h
205VMDHA_RESERVE EQU 0100h
206VMDHA_USEHIGHMEM EQU 0800h
207
208 ;
209 ; Check input parametes.
210 ;
211 mov edx, eax
212 and edx, NOT (VMDHA_SWAP OR VMDHA_USEHIGHMEM OR VMDHA_RESERVE)
213 jnz vma_reterr ; Jump if unsupported flag(s) are set.
214 cmp edi, 0ffffffffh ; Check that EDI is -1.
215 jne vma_reterr ; Jump if EDI != -1
216
217 jmp far ptr FLAT:Thunk32_dh_VMAlloc
218Thunk16_dh_VMAlloc::
219 or eax, eax ; Successful return from Dos32AllocMem?
220 jnz vma_reterr ; Jump on failure.
221 mov eax, edx ; EAX is now 32-bit pointer to the allocated memory.
222
223vma_retok:
224 clc
225 ret
226
227vma_reterr:
228 mov eax, 87 ; ERROR_INVALID_PARAMETER
229 stc
230 ret
231dh_VMAlloc ENDP
232CODE16 ENDS
233
234
235CODE32 SEGMENT
236Thunk32_dh_VMAlloc::
237 ASSUME cs:CODE32, ds:NOTHING, es:NOTHING, ss:NOTHING
238 ;
239 ; Call Dos32AllocMem to allocate the requested memory.
240 ;
241 push eax ; Make space for return pointer.
242 mov edx, esp ; Take address of return pointer.
243 test edx, 0ffff0000h
244 jnz vma_stack32 ; Jump if stack is 32-bit
245 xor edx, edx
246 mov dx, ss ; Make 32-bit pointer to return pointer.
247 shl edx, SEL_FLAT_SHIFT
248 and edx, SEL_FLATMASK
249 mov dx, sp ; EDX is now 32-bit pointer to return pointer.
250vma_stack32:
251
252 test eax, VMDHA_RESERVE
253 jz vma1
254 push 0043h ; Flags: OBJ_TILE | PAG_READ | PAG_WRITE
255 jmp vma2
256vma1:
257 push 0053h ; Flags: OBJ_TILE | PAG_COMMIT | PAG_READ | PAG_WRITE
258vma2:
259 push ecx ; Number of bytes to allocate.
260 push edx ; Pointer to return pointer.
261 call DOS32ALLOCMEM
262 add esp, 12
263 pop edx ; Pointer to allocated memory if any...
264
265 jmp far ptr CODE16:Thunk16_dh_VMAlloc
266CODE32 ENDS
267
268
269CODE16 SEGMENT
270;;
271; Frees memory allocated with VMAlloc.
272; @cproto none
273; @param EAX Linear address of the memory to be freed.
274; @returns Success:
275; CF Clear
276;
277; Failure:
278; CF Set
279; EAX Errorcode
280; ERROR_ACCESS_DENIED
281; ERROR_INVALID_PARAMETER
282;
283; @uses eax, ecx, edx
284; @status completely implemented.
285; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
286dh_VMFree PROC NEAR
287 ASSUME cs:CODE16, ds:NOTHING, es:NOTHING, ss:NOTHING
288 jmp far ptr FLAT:Thunk32_dh_VMFree
289Thunk16_dh_VMFree::
290 or eax, eax
291 jnz vmf_reterr
292
293vmf_retok:
294 clc
295 ret
296
297vmf_reterr:
298 stc
299 ret
300dh_VMFree ENDP
301CODE16 ENDS
302
303
304CODE32 SEGMENT
305; 32-bit part of the dh_VMFree worker
306Thunk32_dh_VMFree::
307 ASSUME cs:CODE32, ds:NOTHING, es:NOTHING, ss:NOTHING
308 push eax
309 call DOS32FREEMEM
310 sub esp, 4
311 jmp far ptr CODE16:Thunk16_dh_VMFree
312CODE32 ENDS
313
314
315CODE16 SEGMENT
316;;
317; Get addresses of kernel variables.
318; @cproto none.
319; @param AL Index.
320; These indexes are supported:
321; DHGETDOSV_SYSINFOSEG 1
322; DHGETDOSV_LOCINFOSEG 2
323; DHGETDOSV_YIELDFLAG 7
324; DHGETDOSV_TCYIELDFLAG 8
325; DHGETDOSV_DOSTABLE 9
326;
327;
328; @param CX VarMember (only index 14 and 16)
329; @param DL DevHlp_GetDOSVar
330; @returns Success:
331; CF Clear
332; AX:BX Points to the index.
333;
334; Failure:
335; CF Set.
336;
337; @uses eax, ebx, ecx, edx
338; @sketch
339; @status
340; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
341; @remark
342dh_GetDOSVar PROC NEAR
343 ASSUME cs:CODE16, ds:NOTHING, es:NOTHING, ss:NOTHING
344 cmp al, 1
345 je gdv_12
346 cmp al, 2
347 je gdv_12
348 cmp al, 7
349 je gdv_8
350 cmp al, 8
351 je gdv_8
352 cmp al, 9
353 je gdv_9
354 jmp gdv_reterr
355
356gdv_12:
357 push ax
358 push ax ; make space for selGIS
359 mov ax, sp ; offset selGIS
360 push ax ; make space for selLIS
361 mov bx, sp ; offset selLIS
362 push ss
363 push ax ; &selGIS
364 push ss
365 push bx ; &selLIS
366 call far ptr DOS16GETINFOSEG
367 pop bx ; selLIS
368 pop cx ; selGIS
369 pop dx ; index parameter
370 or ax, ax ; Did it fail?
371 jnz gdv_reterr ; Jump if it failed.
372 cmp dx, 1
373 je gdv_12_1
374 mov bx, cx ; bx <- selGIS
375gdv_12_1:
376 xor ax, ax
377 jmp gdv_retok
378
379gdv_7:
380 mov ebx, offset YieldFlag
381 mov ax, seg YieldFlag
382 jmp gdv_retok
383
384gdv_8:
385 mov ebx, offset TCYieldFlag
386 mov ax, seg TCYieldFlag
387 jmp gdv_retok
388
389gdv_9:
390 mov ebx, offset DosTable
391 mov ax, seg DosTable
392 jmp gdv_retok
393
394gdv_retok:
395 clc
396 ret
397
398gdv_reterr:
399 stc
400 ret
401dh_GetDOSVar ENDP
402CODE16 ENDS
403
404
405DATA16 SEGMENT
406;; GetDosVar data
407;
408; The two YieldFlags
409;
410YieldFlag db 0
411TCYieldFlag db 0
412DATA16 ENDS
413
414
415DATA32 SEGMENT
416;
417; 32-bit flat stack base.
418;
419TKSSBase dd 0
420DATA32 ENDS
421
422DATA16 SEGMENT
423 ASSUME ds:NOTHING, es:NOTHING, ss:NOTHING
424;
425; The two dostables.
426;
427DosTable db 17
428 DosTable_fph_HardError dd 0
429 DosTable_fph_UCase dd 0
430 DosTable_UnknownOrReserved1 dd 0
431 DosTable_UnknownOrReserved2 dd 0
432 DosTable_UnknownOrReserved3 dd 0
433 DosTable_fph_MemMapAlias dd 0
434 DosTable_fph_MemUnmapAlias dd 0
435 DosTable_fph_GoProtAll dd 0
436 DosTable_fph_GoRealAll dd 0
437 DosTable_fph_doshlp_RedirDev dd 0
438 DosTable_UnknownOrReserved4 dd 0
439 DosTable_UnknownOrReserved5 dd 0
440 DosTable_fph_SFFromSFN dd 0
441 DosTable_fph_SegGetInfo dd 0
442 DosTable_fph_AsgCheckDrive dd 0
443 DosTable_UnknownOrReserved6 dd 0
444 DosTable_UnknownOrReserved7 dd 0
445
446DosTabel2 db 19
447 DosTable2_fpErrMap24 dd 0
448 DosTable2_fpErrMap24End dd 0
449 DosTable2_fpErr_Table_24 dd 0
450 DosTable2_fpCDSAddr dd 0
451 DosTable2_fpGDT_RDR1 dd 0
452 DosTable2_fpInterrupLevel dd 0
453 DosTable2_fp_cInDos dd 0
454 DosTable2_UnknownOrReserved1 dd 0
455 DosTable2_UnknownOrReserved2 dd 0
456 DosTable2_R0FlatCS dw seg FLAT:CODE32
457 dw 0
458 DosTable2_R0FlatDS dw seg FLAT:DATA32
459 dw 0
460 DosTable2_pTKSSBase dd offset FLAT:DATA32:TKSSBase
461 DosTable2_pintSwitchStack dd 0
462 DosTable2_pprivatStack dd 0
463 DosTable2_fpPhysDiskTablePtr dd 0
464 DosTable2_pforceEMHandler dd 0
465 DosTable2_pReserveVM dd 0
466 DosTable2_p_pgpPageDir dd 0
467 DosTable2_UnknownOrReserved3 dd 0
468DATA16 ENDS
469
470
471CODE16 SEGMENT
472
473
474;;
475; VMLock stub.
476; @returns NO_ERROR. (0)
477; @param ignored.
478; @uses eax
479; @status stub.
480; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
481dh_VMLock PROC NEAR
482 xor eax, eax
483 clc
484 ret
485dh_VMLock ENDP
486
487
488
489;;
490; VMUnlock stub.
491; @returns NO_ERROR. (0)
492; @param ignored.
493; @uses eax
494; @status stub.
495; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
496dh_VMUnlock PROC NEAR
497 xor eax, eax
498 clc
499 ret
500dh_VMUnlock ENDP
501
502
503CODE16 ENDS
504
505
506
507
508CODE32 SEGMENT
509;;
510; Initiates the Device_Help function pointer.
511;
512; During startup the C library startup routines needs to use the heap.
513; So the heap has to work before main is able to initiate it. The heap
514; uses device helpers so they have to be initiated too. So, this init
515; routine is called during heap init, _rmem_init.
516;
517; @cproto void _Optlink dhinit(void)
518; @returns NO_ERROR.
519; @param none.
520; @uses eax
521; @sketch
522; @status completly implemented
523; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
524; @remark
525dhinit PROC NEAR
526 ASSUME cs:CODE32, ds:FLAT, es:NOTHING, ss:NOTHING
527 ;
528 ; _Device_Help - d16globl.c
529 ;
530if 0 ;done during device init.
531 mov ax, seg DHRouter
532 shl eax, 16
533 mov ax, offset DHRouter
534 mov _Device_Help, eax
535endif
536
537 ;
538 ; pulTKSSBase32
539 ; DosTable2_pTKSSBase
540 ; DosTable2_R0FlatCS
541 ; DosTable2_R0FlatDS
542 ;
543 mov eax, offset FLAT:TKSSBase
544 mov pulTKSSBase32, eax ; We need it as our testing subsystem uses it too.
545if 0 ; not neede any longer
546 ;mov DosTable2_pTKSSBase, eax
547 ;mov _TKSSBase16, eax
548
549 ;xor eax, eax
550 ;mov ax, seg FLAT:CODE32
551 ;mov DosTable2_R0FlatCS, ax
552 ;mov _R0FlatCS16, ax
553
554 ;mov ax, seg FLAT:DATA32
555 ;mov DosTable2_R0FlatDS, ax
556 ;mov _R0FlatDS16, ax
557endif
558
559 ;
560 ; return NO_ERROR
561 ;
562 xor eax, eax
563 ret
564dhinit ENDP
565
566
567;;
568; Gets the a 16-bit far pointer to the DHRouter routine.
569; @cproto ULONG _Optlink getDHRouterFarPtr(VOID); /* dh.asm */
570; @returns 16-bit far pointer to the DHRouter routine.
571; @uses EAX
572; @status completely implemented.
573; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
574; @remark
575getDHRouterFarPtr PROC NEAR
576 ASSUME cs:CODE32, ds:FLAT, es:NOTHING, ss:NOTHING
577 mov ax, seg CODE16:DHRouter
578 shl eax, 16
579 mov ax, offset CODE16:DHRouter
580 ret
581getDHRouterFarPtr ENDP
582
583
584
585
586
587;;
588; Thunks the stack from 16-bits to 32-bits.
589; !The stack has to be 16-bits on entry!
590; @cproto VOID _Optlink ThunkStack16To32(VOID)
591; @returns void
592; Stack is 32-bits!
593; EBP and SS:ESP is thunked
594;
595; @uses EAX, EDX
596; @sketch
597; @status completly implemented.
598; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
599; @remark RING 3 only.
600ThunkStack16To32 PROC NEAR
601 ASSUME cs:CODE32, ds:FLAT, es:NOTHING, ss:NOTHING
602 movzx esp, sp ; Make sure high end of esp is zero.
603 mov ax, ss ; Find the linary base of the segment addressed by ss.
604 shl eax, SEL_FLAT_SHIFT
605 and eax, SEL_FLATMASK
606 mov ax, sp ; Add the segment offset, which is sp.
607 ; eax is now the linear stack address equal to ss:sp.
608
609 mov dx, seg FLAT:DATA32 ; ALP bug? Can't: push seg FLAT:DATA32
610 ; Have to move it to dx before pushing it.
611 push dx ; Make lss quad word: new ss, new esp
612 push eax
613 lss esp, ss:[esp] ; load new ss and esp values.
614
615 ;
616 ; Fix ebp
617 ; Creates new ebp from high word of esp and low word of ebp.
618 ;
619 mov eax, esp
620 mov ax, bp
621 mov ebp, eax
622
623 ;
624 ; Update TKSSBase
625 ;
626 push ds
627 mov ds, dx
628 ASSUME ds:FLAT
629 mov TKSSBase, 0
630 pop ds
631 ret
632ThunkStack16To32 ENDP
633
634
635;;
636; Thunks the stack from 32-bits to 16-bits.
637; !The stack has to be 32-bits on entry!
638; @cproto VOID _Optlink ThunkStack32To16(VOID)
639; @returns void
640; Stack is 16-bits!
641; EBP and SS:ESP is thunked
642;
643; @uses EAX, EDX
644; @sketch
645; @status completly implemented.
646; @author knut st. osmundsen (knut.stange.osmundsen@pmsc.no)
647; @remark RING 3 only.
648ThunkStack32To16 PROC NEAR
649 ASSUME cs:CODE32, ds:FLAT, es:NOTHING, ss:NOTHING
650
651 mov edx, esp ; save esp for later use (setting TKSSBase).
652
653 ;
654 ; calc LDT selector from linear esp and load new ss:esp.
655 ;
656 mov eax, esp
657 shr eax, SEL_FLAT_SHIFT
658 or ax, SEL_LDT_RPL3 ; ax new ss LDT (RING3).
659 rol eax, 16
660 mov ax, sp
661 push eax
662 lss sp, dword ptr [esp] ; load ss:sp.
663 movzx esp, sp ; Zero upper part of esp.
664 ; Stack is now 16 bits
665 ;
666 ; Fix ebp
667 ;
668 movzx ebp, bp ; Zero upper part of ebp.
669
670 ;
671 ; Update TKSSBase
672 ;
673 push ds
674 mov ax, seg FLAT:DATA32
675 mov ds, ax
676 ASSUME ds:FLAT
677 xor dx, dx ; zero lower word of dx to get linear
678 ; address of 16-bits stack base
679 mov TKSSBase, edx
680 pop ds
681
682 ret
683ThunkStack32To16 ENDP
684
685
686CODE32 ENDS
687
688end
689
Note: See TracBrowser for help on using the repository browser.