Index: trunk/src/binutils/config-ml.in
===================================================================
--- trunk/src/binutils/config-ml.in	(revision 604)
+++ trunk/src/binutils/config-ml.in	(revision 606)
@@ -1,840 +1,0 @@
-# Configure fragment invoked in the post-target section for subdirs
-# wanting multilib support.
-#
-# It is advisable to support a few --enable/--disable options to let the
-# user select which libraries s/he really wants.
-#
-# Subdirectories wishing to use multilib should put the following lines
-# in the "post-target" section of configure.in.
-#
-# if [ "${srcdir}" = "." ] ; then
-#   if [ "${with_target_subdir}" != "." ] ; then
-#     . ${with_multisrctop}../../config-ml.in
-#   else
-#     . ${with_multisrctop}../config-ml.in
-#   fi
-# else
-#   . ${srcdir}/../config-ml.in
-# fi
-#
-# See librx/configure.in in the libg++ distribution for an example of how
-# to handle autoconf'd libraries.
-#
-# Things are complicated because 6 separate cases must be handled:
-# 2 (native, cross) x 3 (absolute-path, relative-not-dot, dot) = 6.
-#
-# srcdir=. is special.  It must handle make programs that don't handle VPATH.
-# To implement this, a symlink tree is built for each library and for each
-# multilib subdir.
-#
-# The build tree is layed out as
-#
-# ./
-#   libg++
-#   newlib
-#   m68020/
-#          libg++
-#          newlib
-#          m68881/
-#                 libg++
-#                 newlib
-#
-# The nice feature about this arrangement is that inter-library references
-# in the build tree work without having to care where you are.  Note that
-# inter-library references also work in the source tree because symlink trees
-# are built when srcdir=.
-#
-# Unfortunately, trying to access the libraries in the build tree requires
-# the user to manually choose which library to use as GCC won't be able to
-# find the right one.  This is viewed as the lesser of two evils.
-#
-# Configure variables:
-# ${with_target_subdir} = "." for native, or ${target_alias} for cross.
-# Set by top level Makefile.
-# ${with_multisrctop} = how many levels of multilibs there are in the source
-# tree.  It exists to handle the case of configuring in the source tree:
-# ${srcdir} is not constant.
-# ${with_multisubdir} = name of multilib subdirectory (eg: m68020/m68881).
-#
-# Makefile variables:
-# MULTISRCTOP = number of multilib levels in source tree (+1 if cross)
-# (FIXME: note that this is different than ${with_multisrctop}.  Check out.).
-# MULTIBUILDTOP = number of multilib levels in build tree
-# MULTIDIRS = list of multilib subdirs (eg: m68000 m68020 ...)
-# (only defined in each library's main Makefile).
-# MULTISUBDIR = installed subdirectory name with leading '/' (eg: /m68000)
-# (only defined in each multilib subdir).
-
-# FIXME: Multilib is currently disabled by default for everything other than
-# newlib.  It is up to each target to turn on multilib support for the other
-# libraries as desired.
-
-# We have to handle being invoked by both Cygnus configure and Autoconf.
-#
-# Cygnus configure incoming variables:
-# srcdir, subdir, host, arguments
-#
-# Autoconf incoming variables:
-# srcdir, host, ac_configure_args
-#
-# We *could* figure srcdir and host out, but we'd have to do work that
-# our caller has already done to figure them out and requiring these two
-# seems reasonable.
-# Note that `host' in this case is GCC's `target'.  Target libraries are
-# configured for a particular host.
-
-if [ -n "${ac_configure_args}" ]; then
-  Makefile=${ac_file-Makefile}
-  ml_config_shell=${CONFIG_SHELL-/bin/sh}
-  ml_arguments="${ac_configure_args}"
-  ml_realsrcdir=${srcdir}
-else
-  Makefile=${Makefile-Makefile}
-  ml_config_shell=${config_shell-/bin/sh}
-  ml_arguments="${arguments}"
-  if [ -n "${subdir}" -a "${subdir}" != "." ] ; then
-    ml_realsrcdir=${srcdir}/${subdir}
-  else
-    ml_realsrcdir=${srcdir}
-  fi
-fi
-
-# Scan all the arguments and set all the ones we need.
-
-ml_verbose=--verbose
-for option in ${ml_arguments}
-do
-  case $option in
-  --*) ;;
-  -*) option=-$option ;;
-  esac
-
-  case $option in
-  --*=*)
-	optarg=`echo $option | sed -e 's/^[^=]*=//'`
-	;;
-  esac
-
-  case $option in
-  --disable-*)
-	enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
-	eval $enableopt=no
-	;;
-  --enable-*)
-	case "$option" in
-	*=*)	;;
-	*)	optarg=yes ;;
-	esac
-	enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
-	eval $enableopt="$optarg"
-	;;
-  --norecursion | --no*)
-	ml_norecursion=yes
-	;;
-  --silent | --sil* | --quiet | --q*)
-	ml_verbose=--silent
-	;;
-  --verbose | --v | --verb*)
-	ml_verbose=--verbose
-	;;
-  --with-*)
-	case "$option" in
-	*=*)	;;
-	*)	optarg=yes ;;
-	esac
-	withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
-	eval $withopt="$optarg"
-	;;
-  --without-*)
-	withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
-	eval $withopt=no
-	;;
-  esac
-done
-
-# Only do this if --enable-multilib.
-if [ "${enable_multilib}" = yes ]; then
-
-# Compute whether this is the library's top level directory
-# (ie: not a multilib subdirectory, and not a subdirectory like libg++/src).
-# ${with_multisubdir} tells us we're in the right branch, but we could be
-# in a subdir of that.
-# ??? The previous version could void this test by separating the process into
-# two files: one that only the library's toplevel configure.in ran (to
-# configure the multilib subdirs), and another that all configure.in's ran to
-# update the Makefile.  It seemed reasonable to collapse all multilib support
-# into one file, but it does leave us with having to perform this test.
-ml_toplevel_p=no
-if [ -z "${with_multisubdir}" ]; then
-  if [ "${srcdir}" = "." ]; then
-    # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
-    # ${with_target_subdir} = "." for native, otherwise target alias.
-    if [ "${with_target_subdir}" = "." ]; then
-      if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
-	ml_toplevel_p=yes
-      fi
-    else
-      if [ -f ${ml_realsrcdir}/../../config-ml.in ]; then
-	ml_toplevel_p=yes
-      fi
-    fi
-  else
-    # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
-    if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
-      ml_toplevel_p=yes
-    fi
-  fi
-fi
-
-# If this is the library's top level directory, set multidirs to the
-# multilib subdirs to support.  This lives at the top because we need
-# `multidirs' set right away.
-
-if [ "${ml_toplevel_p}" = yes ]; then
-
-multidirs=
-for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
-  dir=`echo $i | sed -e 's/;.*$//'`
-  if [ "${dir}" = "." ]; then
-    true
-  else
-    if [ -z "${multidirs}" ]; then
-      multidirs="${dir}"
-    else
-      multidirs="${multidirs} ${dir}"
-    fi
-  fi
-done
-
-# Target libraries are configured for the host they run on, so we check
-# $host here, not $target.
-
-case "${host}" in
-arc-*-elf*)
-	if [ x$enable_biendian != xyes ]
-	then
-	  old_multidirs=${multidirs}
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "${x}" in
-	      *be*) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	;;
-arm-*-*)
-	if [ x"$enable_fpu" = xno ]
-	then
-	  old_multidirs=${multidirs}
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "${x}" in
-	      *fpu*) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x"$enable_26bit" = xno ]
-	then
-	  old_multidirs=${multidirs}
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "${x}" in
-	      *26bit*) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x"$enable_underscore" = xno ]
-	then
-	  old_multidirs=${multidirs}
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "${x}" in
-	      *under*) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x"$enable_interwork" = xno ]
-	then
-	  old_multidirs=${multidirs}
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "${x}" in
-	      *interwork*) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_biendian = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *le* ) : ;;
-	      *be* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x"$enable_nofmult" = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *nofmult* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	;;
-m68*-*-*)
-	if [ x$enable_softfloat = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *soft-float* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_m68881 = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *m68881* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_m68000 = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *m68000* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_m68020 = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *m68020* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	;;
-mips*-*-*)
-	if [ x$enable_single_float = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *single* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_biendian = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *el* ) : ;;
-	      *eb* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_softfloat = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *soft-float* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	case " $multidirs " in
-	*" mabi=64 "*)
-	  # We will not be able to create libraries with -mabi=64 if
-	  # we cannot even link a trivial program.  It usually
-	  # indicates the 64bit libraries are missing.
-	  if echo 'main() {}' > conftest.c &&
-	     ${CC-gcc} -mabi=64 conftest.c -o conftest; then
-	    :
-	  else
-	    echo Could not link program with -mabi=64, disabling it.
-	    old_multidirs="${multidirs}"
-	    multidirs=""
-	    for x in ${old_multidirs}; do
-	      case "$x" in
-	      *mabi=64* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	      esac
-	    done
-	  fi
-	  rm -f conftest.c conftest
-	  ;;
-	esac
-	;;
-powerpc*-*-* | rs6000*-*-*)
-	if [ x$enable_softfloat = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *soft-float* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_powercpu = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      power | */power | */power/* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_powerpccpu = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *powerpc* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_powerpcos = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *mcall-linux* | *mcall-solaris* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_biendian = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *mlittle* | *mbig* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_sysv = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *mcall-sysv* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_aix = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *mcall-aix* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	;;
-sparc*-*-*)
-	case " $multidirs " in
-	*" m64 "*)
-	  # We will not be able to create libraries with -m64 if
-	  # we cannot even link a trivial program.  It usually
-	  # indicates the 64bit libraries are missing.
-	  if echo 'main() {}' > conftest.c &&
-	     ${CC-gcc} -m64 conftest.c -o conftest; then
-	    :
-	  else
-	    echo Could not link program with -m64, disabling it.
-	    old_multidirs="${multidirs}"
-	    multidirs=""
-	    for x in ${old_multidirs}; do
-	      case "$x" in
-	      *m64* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	      esac
-	    done
-	  fi
-	  rm -f conftest.c conftest
-	  ;;
-	esac
-	;;
-esac
-
-# Remove extraneous blanks from multidirs.
-# Tests like `if [ -n "$multidirs" ]' require it.
-multidirs=`echo "$multidirs" | sed -e 's/^[ ][ ]*//' -e 's/[ ][ ]*$//' -e 's/[ ][ ]*/ /g'`
-
-# Add code to library's top level makefile to handle building the multilib
-# subdirs.
-
-cat > Multi.tem <<\EOF
-
-# FIXME: There should be an @-sign in front of the `if'.
-# Leave out until this is tested a bit more.
-multi-do:
-	if [ -z "$(MULTIDIRS)" ]; then \
-	  true; \
-	else \
-	  rootpre=`pwd`/; export rootpre; \
-	  srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
-	  lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
-	  compiler="$(CC)"; \
-	  for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
-	    dir=`echo $$i | sed -e 's/;.*$$//'`; \
-	    if [ "$${dir}" = "." ]; then \
-	      true; \
-	    else \
-	      if [ -d ../$${dir}/$${lib} ]; then \
-		flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
-		if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
-				CFLAGS="$(CFLAGS) $${flags}" \
-				prefix="$(prefix)" \
-				exec_prefix="$(exec_prefix)" \
-				CXXFLAGS="$(CXXFLAGS) $${flags}" \
-				LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
-				LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
-				LDFLAGS="$(LDFLAGS) $${flags}" \
-				$(DO)); then \
-		  true; \
-		else \
-		  exit 1; \
-		fi; \
-	      else true; \
-	      fi; \
-	    fi; \
-	  done; \
-	fi
-
-# FIXME: There should be an @-sign in front of the `if'.
-# Leave out until this is tested a bit more.
-multi-clean:
-	if [ -z "$(MULTIDIRS)" ]; then \
-	  true; \
-	else \
-	  lib=`pwd | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
-	  for dir in Makefile $(MULTIDIRS); do \
-	    if [ -f ../$${dir}/$${lib}/Makefile ]; then \
-	      if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
-	      then true; \
-	      else exit 1; \
-	      fi; \
-	    else true; \
-	    fi; \
-	  done; \
-	fi
-EOF
-
-cat ${Makefile} Multi.tem > Makefile.tem
-rm -f ${Makefile} Multi.tem
-mv Makefile.tem ${Makefile}
-
-fi # ${ml_toplevel_p} = yes
-
-if [ "${ml_verbose}" = --verbose ]; then
-  echo "Adding multilib support to Makefile in ${ml_realsrcdir}"
-  if [ "${ml_toplevel_p}" = yes ]; then
-    echo "multidirs=${multidirs}"
-  fi
-  echo "with_multisubdir=${with_multisubdir}"
-fi
-
-if [ "${srcdir}" = "." ]; then
-  if [ "${with_target_subdir}" != "." ]; then
-    ml_srcdotdot="../"
-  else
-    ml_srcdotdot=""
-  fi
-else
-  ml_srcdotdot=""
-fi
-
-if [ -z "${with_multisubdir}" ]; then
-  ml_subdir=
-  ml_builddotdot=
-  : # ml_srcdotdot= # already set
-else
-  ml_subdir="/${with_multisubdir}"
-  # The '[^/][^/]*' appears that way to work around a SunOS sed bug.
-  ml_builddotdot=`echo ${with_multisubdir} | sed -e 's:[^/][^/]*:..:g'`/
-  if [ "$srcdir" = "." ]; then
-    ml_srcdotdot=${ml_srcdotdot}${ml_builddotdot}
-  else
-    : # ml_srcdotdot= # already set
-  fi
-fi
-
-if [ "${ml_toplevel_p}" = yes ]; then
-  ml_do='$(MAKE)'
-  ml_clean='$(MAKE)'
-else
-  ml_do=true
-  ml_clean=true
-fi
-
-# TOP is used by newlib and should not be used elsewhere for this purpose.
-# MULTI{SRC,BUILD}TOP are the proper ones to use.  MULTISRCTOP is empty
-# when srcdir != builddir.  MULTIBUILDTOP is always some number of ../'s.
-# FIXME: newlib needs to be updated to use MULTI{SRC,BUILD}TOP so we can
-# delete TOP.  Newlib may wish to continue to use TOP for its own purposes
-# of course.
-# MULTIDIRS is non-empty for the cpu top level Makefile (eg: newlib/Makefile)
-# and lists the subdirectories to recurse into.
-# MULTISUBDIR is non-empty in each cpu subdirectory's Makefile
-# (eg: newlib/h8300h/Makefile) and is the installed subdirectory name with
-# a leading '/'.
-# MULTIDO is used for targets like all, install, and check where
-# $(FLAGS_TO_PASS) augmented with the subdir's compiler option is needed.
-# MULTICLEAN is used for the *clean targets.
-#
-# ??? It is possible to merge MULTIDO and MULTICLEAN into one.  They are
-# currently kept separate because we don't want the *clean targets to require
-# the existence of the compiler (which MULTIDO currently requires) and
-# therefore we'd have to record the directory options as well as names
-# (currently we just record the names and use --print-multi-lib to get the
-# options).
-
-sed -e "s:^TOP[ 	]*=[ 	]*\([./]*\)[ 	]*$:TOP = ${ml_builddotdot}\1:" \
-    -e "s:^MULTISRCTOP[ 	]*=.*$:MULTISRCTOP = ${ml_srcdotdot}:" \
-    -e "s:^MULTIBUILDTOP[ 	]*=.*$:MULTIBUILDTOP = ${ml_builddotdot}:" \
-    -e "s:^MULTIDIRS[ 	]*=.*$:MULTIDIRS = ${multidirs}:" \
-    -e "s:^MULTISUBDIR[ 	]*=.*$:MULTISUBDIR = ${ml_subdir}:" \
-    -e "s:^MULTIDO[ 	]*=.*$:MULTIDO = $ml_do:" \
-    -e "s:^MULTICLEAN[ 	]*=.*$:MULTICLEAN = $ml_clean:" \
-	${Makefile} > Makefile.tem
-rm -f ${Makefile}
-mv Makefile.tem ${Makefile}
-
-# If this is the library's top level, configure each multilib subdir.
-# This is done at the end because this is the loop that runs configure
-# in each multilib subdir and it seemed reasonable to finish updating the
-# Makefile before going on to configure the subdirs.
-
-if [ "${ml_toplevel_p}" = yes ]; then
-
-# We must freshly configure each subdirectory.  This bit of code is
-# actually partially stolen from the main configure script.  FIXME.
-
-if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
-
-  if [ "${ml_verbose}" = --verbose ]; then
-    echo "Running configure in multilib subdirs ${multidirs}"
-    echo "pwd: `pwd`"
-  fi
-
-  ml_origdir=`pwd`
-  ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'`
-  # cd to top-level-build-dir/${with_target_subdir}
-  cd ..
-
-  for ml_dir in ${multidirs}; do
-
-    if [ "${ml_verbose}" = --verbose ]; then
-      echo "Running configure in multilib subdir ${ml_dir}"
-      echo "pwd: `pwd`"
-    fi
-
-    if [ -d ${ml_dir} ]; then true; else
-      # ``mkdir -p ${ml_dir}'' See also mkinstalldirs.
-      pathcomp=""
-      for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do
-        pathcomp="$pathcomp$d"
-        case "$pathcomp" in
-          -* ) pathcomp=./$pathcomp ;;
-        esac
-        if test ! -d "$pathcomp"; then
-           echo "mkdir $pathcomp" 1>&2
-           mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
-        fi
-        if test ! -d "$pathcomp"; then
-	   exit $lasterr
-        fi
-        pathcomp="$pathcomp/"
-      done
-    fi
-    if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi
-
-    # Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../
-    dotdot=../`echo ${ml_dir} | sed -e 's|[^/]||g' -e 's|/|../|g'`
-
-    case ${srcdir} in
-    ".")
-      echo Building symlink tree in `pwd`/${ml_dir}/${ml_libdir}
-      if [ "${with_target_subdir}" != "." ]; then
-	ml_unsubdir="../"
-      else
-	ml_unsubdir=""
-      fi
-      (cd ${ml_dir}/${ml_libdir};
-       ../${dotdot}${ml_unsubdir}symlink-tree ../${dotdot}${ml_unsubdir}${ml_libdir} "")
-      if [ -f ${ml_dir}/${ml_libdir}/Makefile ]; then
-	if [ x"${MAKE}" = x ]; then
-	  (cd ${ml_dir}/${ml_libdir}; make distclean)
-	else
-	  (cd ${ml_dir}/${ml_libdir}; ${MAKE} distclean)
-	fi
-      fi
-      ml_newsrcdir="."
-      ml_srcdiroption=
-      multisrctop=${dotdot}
-      ;;
-    *)
-      case "${srcdir}" in
-      /*) # absolute path
-        ml_newsrcdir=${srcdir}
-        ;;
-      *) # otherwise relative
-        ml_newsrcdir=${dotdot}${srcdir}
-        ;;
-      esac
-      ml_srcdiroption="-srcdir=${ml_newsrcdir}"
-      multisrctop=
-      ;;
-    esac
-
-    case "${progname}" in
-    /*)     ml_recprog=${progname} ;;
-    *)      ml_recprog=${dotdot}${progname} ;;
-    esac
-
-    # FIXME: POPDIR=${PWD=`pwd`} doesn't work here.
-    ML_POPDIR=`pwd`
-    cd ${ml_dir}/${ml_libdir}
-
-    if [ -f ${ml_newsrcdir}/configure ]; then
-      ml_recprog="${ml_newsrcdir}/configure --cache-file=../config.cache"
-    fi
-
-    # find compiler flag corresponding to ${ml_dir}
-    for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do 
-      dir=`echo $i | sed -e 's/;.*$//'`
-      if [ "${dir}" = "${ml_dir}" ]; then
-        flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`
-        break
-      fi
-    done
-    ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags"'
-
-    if [ "${with_target_subdir}" = "." ]; then
-	CC_=$CC' '
-	CXX_=$CXX' '
-    else
-	# Create a regular expression that matches any string as long
-	# as ML_POPDIR.
-	popdir_rx=`echo ${ML_POPDIR} | sed 's,.,.,g'`
-	CC_=
-	for arg in ${CC}; do
-	  case $arg in
-	  -[BIL]"${ML_POPDIR}"/*)
-	    CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\1/p"`' ' ;;
-	  "${ML_POPDIR}"/*)
-	    CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
-	  *)
-	    CC_="${CC_}${arg} " ;;
-	  esac
-	done
-
-	CXX_=
-	for arg in ${CXX}; do
-	  case $arg in
-	  -[BIL]"${ML_POPDIR}"/*)
-	    CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
-	  "${ML_POPDIR}"/*)
-	    CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
-	  *)
-	    CXX_="${CXX_}${arg} " ;;
-	  esac
-	done
-
-	if test "x${LD_LIBRARY_PATH+set}" = xset; then
-	  LD_LIBRARY_PATH_=
-	  for arg in `echo "$LD_LIBRARY_PATH" | tr ':' ' '`; do
-	    case "$arg" in
-	    "${ML_POPDIR}"/*)
-	      arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
-	      ;;
-	    esac
-	    if test "x$LD_LIBRARY_PATH_" != x; then
-	      LD_LIBRARY_PATH_=$LD_LIBRARY_PATH_:$arg
-	    else
-	      LD_LIBRARY_PATH_=$arg
-	    fi
-          done
-	  ml_config_env="$ml_config_env LD_LIBRARY_PATH=$LD_LIBRARY_PATH_"
-	fi
-
-	if test "x${SHLIB_PATH+set}" = xset; then
-	  SHLIB_PATH_=
-	  for arg in `echo "$SHLIB_PATH" | tr ':' ' '`; do
-	    case "$arg" in
-	    "${ML_POPDIR}"/*)
-	      arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
-	      ;;
-	    esac
-	    if test "x$SHLIB_PATH_" != x; then
-	      SHLIB_PATH_=$SHLIB_PATH_:$arg
-	    else
-	      SHLIB_PATH_=$arg
-	    fi
-          done
-	  ml_config_env="$ml_config_env SHLIB_PATH=$SHLIB_PATH_"
-	fi
-    fi
-
-    if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \
-	--with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \
-	${ml_arguments} ${ml_srcdiroption} ; then
-      true
-    else
-      exit 1
-    fi
-
-    cd ${ML_POPDIR}
-
-  done
-
-  cd ${ml_origdir}
-fi
-
-fi # ${ml_toplevel_p} = yes
-fi # ${enable_multilib} = yes
Index: trunk/src/binutils/config.guess
===================================================================
--- trunk/src/binutils/config.guess	(revision 604)
+++ trunk/src/binutils/config.guess	(revision 606)
@@ -1,8 +1,8 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-#   Free Software Foundation, Inc.
-
-timestamp='2001-03-16'
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+timestamp='2003-05-09'
 
 # This file is free software; you can redistribute it and/or modify it
@@ -25,6 +25,7 @@
 # the same distribution terms that you use for the rest of that program.
 
-# Written by Per Bothner <bothner@cygnus.com>.
-# Please send patches to <config-patches@gnu.org>.
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
 #
 # This script attempts to guess a canonical system name similar to
@@ -53,5 +54,5 @@
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
 Free Software Foundation, Inc.
 
@@ -88,31 +89,42 @@
 fi
 
-
-dummy=dummy-$$
-trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script.
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
 # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
 # use `HOST_CC' if defined, but it is deprecated.
 
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
 case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int dummy(){}" > $dummy.c
-	for c in cc gcc c89 ; do
-	  ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1
-	  if test $? = 0 ; then
-	     CC_FOR_BUILD="$c"; break
-	  fi
-	done
-	rm -f $dummy.c $dummy.o $dummy.rel
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
 	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found
+	  CC_FOR_BUILD=no_compiler_found ;
 	fi
 	;;
  ,,*)   CC_FOR_BUILD=$CC ;;
  ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac
+esac ;'
 
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 8/24/94.)
+# (ghazi@noc.rutgers.edu 1994-08-24)
 if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
 	PATH=$PATH:/.attbin ; export PATH
@@ -128,5 +140,5 @@
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:NetBSD:*:*)
-	# Netbsd (nbsd) targets should (where applicable) match one or
+	# NetBSD (nbsd) targets should (where applicable) match one or
 	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
 	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
@@ -135,20 +147,22 @@
 	# compatibility and a consistent mechanism for selecting the
 	# object file format.
-	# Determine the machine/vendor (is the vendor relevant).
-	case "${UNAME_MACHINE}" in
-	    amiga) machine=m68k-unknown ;;
-	    arm32) machine=arm-unknown ;;
-	    atari*) machine=m68k-atari ;;
-	    sun3*) machine=m68k-sun ;;
-	    mac68k) machine=m68k-apple ;;
-	    macppc) machine=powerpc-apple ;;
-	    hp3[0-9][05]) machine=m68k-hp ;;
-	    ibmrt|romp-ibm) machine=romp-ibm ;;
-	    *) machine=${UNAME_MACHINE}-unknown ;;
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
 	# to ELF recently, or will in the future.
-	case "${UNAME_MACHINE}" in
-	    i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
 			| grep __ELF__ >/dev/null
@@ -166,5 +180,16 @@
 	esac
 	# The OS release
-	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
 	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
 	# contains redundant information, the shorter form:
@@ -172,61 +197,88 @@
 	echo "${machine}-${os}${release}"
 	exit 0 ;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    macppc:OpenBSD:*:*)
+	echo powerpc-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvmeppc:OpenBSD:*:*)
+	echo powerpc-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mipseb-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sun3:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     alpha:OSF1:*:*)
 	if test $UNAME_RELEASE = "V4.0"; then
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
 	fi
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
 	# A Vn.n version is a released version.
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	cat <<EOF >$dummy.s
-	.data
-\$Lformat:
-	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
-
-	.text
-	.globl main
-	.align 4
-	.ent main
-main:
-	.frame \$30,16,\$26,0
-	ldgp \$29,0(\$27)
-	.prologue 1
-	.long 0x47e03d80 # implver \$0
-	lda \$2,-1
-	.long 0x47e20c21 # amask \$2,\$1
-	lda \$16,\$Lformat
-	mov \$0,\$17
-	not \$1,\$18
-	jsr \$26,printf
-	ldgp \$29,0(\$26)
-	mov 0,\$16
-	jsr \$26,exit
-	.end main
-EOF
-	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-	if test "$?" = 0 ; then
-		case `./$dummy` in
-			0-0)
-				UNAME_MACHINE="alpha"
-				;;
-			1-0)
-				UNAME_MACHINE="alphaev5"
-				;;
-			1-1)
-				UNAME_MACHINE="alphaev56"
-				;;
-			1-101)
-				UNAME_MACHINE="alphapca56"
-				;;
-			2-303)
-				UNAME_MACHINE="alphaev6"
-				;;
-			2-307)
-				UNAME_MACHINE="alphaev67"
-				;;
-		esac
-	fi
-	rm -f $dummy.s $dummy
 	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
 	exit 0 ;;
@@ -243,27 +295,9 @@
 	echo m68k-unknown-sysv4
 	exit 0;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     *:[Aa]miga[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-amigaos
 	exit 0 ;;
-    arc64:OpenBSD:*:*)
-	echo mips64el-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hkmips:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
 	exit 0 ;;
     *:OS/390:*:*)
@@ -287,4 +321,8 @@
 	echo pyramid-pyramid-svr4
 	exit 0 ;;
+    DRS?6000:UNIX_SV:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7 && exit 0 ;;
+	esac ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
@@ -315,5 +353,5 @@
 	exit 0 ;;
     sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
 	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
 	case "`/bin/arch`" in
@@ -328,7 +366,4 @@
     aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
     # The situation for MiNT is a little confusing.  The machine name
@@ -358,16 +393,4 @@
         echo m68k-unknown-mint${UNAME_RELEASE}
         exit 0 ;;
-    sun3*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
@@ -386,4 +409,5 @@
 	exit 0 ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 #ifdef __cplusplus
@@ -407,9 +431,17 @@
 	}
 EOF
-	$CC_FOR_BUILD $dummy.c -o $dummy \
-	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && rm -f $dummy.c $dummy && exit 0
-	rm -f $dummy.c $dummy
+	$CC_FOR_BUILD -o $dummy $dummy.c \
+	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && exit 0
 	echo mips-mips-riscos${UNAME_RELEASE}
+	exit 0 ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit 0 ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit 0 ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
 	exit 0 ;;
     Night_Hawk:Power_UNIX:*:*)
@@ -460,5 +492,5 @@
 	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
 	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
-    i?86:AIX:*:*)
+    i*86:AIX:*:*)
 	echo i386-ibm-aix
 	exit 0 ;;
@@ -473,4 +505,5 @@
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
 		sed 's/^		//' << EOF >$dummy.c
 		#include <sys/systemcfg.h>
@@ -484,6 +517,5 @@
 			}
 EOF
-		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
-		rm -f $dummy.c $dummy
+		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
 		echo rs6000-ibm-aix3.2.5
 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
@@ -494,5 +526,5 @@
 	exit 0 ;;
     *:AIX:*:[45])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -534,8 +566,6 @@
 	    9000/[34]?? )         HP_ARCH=m68k ;;
 	    9000/[678][0-9][0-9])
-              case "${HPUX_REV}" in
-                11.[0-9][0-9])
-                  if [ -x /usr/bin/getconf ]; then
-                    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
                     sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
                     case "${sc_cpu_version}" in
@@ -546,10 +576,11 @@
                           32) HP_ARCH="hppa2.0n" ;;
                           64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
                         esac ;;
                     esac
-                  fi ;;
-              esac
-              if [ "${HP_ARCH}" = "" ]; then
-              sed 's/^              //' << EOF >$dummy.c
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^              //' << EOF >$dummy.c
 
               #define _HPUX_SOURCE
@@ -584,9 +615,19 @@
               }
 EOF
-	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
-	if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
-	rm -f $dummy.c $dummy
-	fi ;;
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
 	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    # avoid double evaluation of $set_cc_for_build
+	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
 	exit 0 ;;
@@ -596,4 +637,5 @@
 	exit 0 ;;
     3050*:HI-UX:*:*)
+	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 	#include <unistd.h>
@@ -621,6 +663,5 @@
 	}
 EOF
-	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
-	rm -f $dummy.c $dummy
+	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
 	echo unknown-hitachi-hiuxwe2
 	exit 0 ;;
@@ -631,5 +672,5 @@
 	echo hppa1.0-hp-bsd
 	exit 0 ;;
-    *9??*:MPE/iX:*:*)
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
 	echo hppa1.0-hp-mpeix
 	exit 0 ;;
@@ -640,5 +681,5 @@
 	echo hppa1.0-hp-osf
 	exit 0 ;;
-    i?86:OSF1:*:*)
+    i*86:OSF1:*:*)
 	if [ -x /usr/sbin/sysversion ] ; then
 	    echo ${UNAME_MACHINE}-unknown-osf1mk
@@ -649,7 +690,4 @@
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
-	exit 0 ;;
-    hppa*:OpenBSD:*:*)
-	echo hppa-unknown-openbsd
 	exit 0 ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
@@ -671,21 +709,16 @@
 	echo c4-convex-bsd
         exit 0 ;;
-    CRAY*X-MP:*:*:*)
-	echo xmp-cray-unicos
-        exit 0 ;;
     CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE}
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
     CRAY*[A-Z]90:*:*:*)
 	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
 	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
     CRAY*TS:*:*:*)
 	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
-    CRAY*T3D:*:*:*)
-	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
     CRAY*T3E:*:*:*)
 	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
@@ -694,7 +727,7 @@
 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
-    CRAY-2:*:*:*)
-	echo cray2-cray-unicos
-        exit 0 ;;
+    *:UNICOS/mp:*:*)
+	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' 
+	exit 0 ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
@@ -703,8 +736,5 @@
         echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
         exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    i?86:BSD/386:*:* | i?86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
 	exit 0 ;;
@@ -715,9 +745,17 @@
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit 0 ;;
-    *:FreeBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit 0 ;;
-    *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+    *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
+	# Determine whether the default compiler uses glibc.
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#if __GLIBC__ >= 2
+	LIBC=gnu
+	#else
+	LIBC=
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
 	exit 0 ;;
     i*:CYGWIN*:*)
@@ -729,4 +767,10 @@
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
+	exit 0 ;;
+    x86:Interix*:3*)
+	echo i586-pc-interix3
+	exit 0 ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
 	exit 0 ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
@@ -734,5 +778,5 @@
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
 	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i386-pc-interix
+	echo i586-pc-interix
 	exit 0 ;;
     i*:UWIN*:*)
@@ -755,5 +799,5 @@
 	exit 0 ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit 0 ;;
     m68*:Linux:*:*)
@@ -761,95 +805,59 @@
 	exit 0 ;;
     mips:Linux:*:*)
-	cat >$dummy.c <<EOF
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-int main (int argc, char *argv[]) {
-#else
-int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __MIPSEB__
-  printf ("%s-unknown-linux-gnu\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
-  printf ("%sel-unknown-linux-gnu\n", argv[1]);
-#endif
-  return 0;
-}
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mipsel
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips
+	#else
+	CPU=
+	#endif
+	#endif
 EOF
-	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
-	rm -f $dummy.c $dummy
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	;;
+    mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips64
+	#undef mips64el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mips64el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips64
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
 	;;
     ppc:Linux:*:*)
-	# Determine Lib Version
-	cat >$dummy.c <<EOF
-#include <features.h>
-#if defined(__GLIBC__)
-extern char __libc_version[];
-extern char __libc_release[];
-#endif
-main(argc, argv)
-     int argc;
-     char *argv[];
-{
-#if defined(__GLIBC__)
-  printf("%s %s\n", __libc_version, __libc_release);
-#else
-  printf("unknown\n");
-#endif
-  return 0;
-}
-EOF
-	LIBC=""
-	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
-	if test "$?" = 0 ; then
-		./$dummy | grep 1\.99 > /dev/null
-		if test "$?" = 0 ; then LIBC="libc1" ; fi
-	fi
-	rm -f $dummy.c $dummy
-	echo powerpc-unknown-linux-gnu${LIBC}
+	echo powerpc-unknown-linux-gnu
+	exit 0 ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
 	exit 0 ;;
     alpha:Linux:*:*)
-	cat <<EOF >$dummy.s
-	  .data
-	  \$Lformat:
-		.byte 37,100,45,37,120,10,0	# "%d-%x\n"
-	   .text
-		.globl main
-		.align 4
-		.ent main
-	    main:
-		.frame \$30,16,\$26,0
-		ldgp \$29,0(\$27)
-		.prologue 1
-		.long 0x47e03d80 # implver \$0
-		lda \$2,-1
-		.long 0x47e20c21 # amask \$2,\$1
-		lda \$16,\$Lformat
-		mov \$0,\$17
-		not \$1,\$18
-		jsr \$26,printf
-		ldgp \$29,0(\$26)
-		mov 0,\$16
-		jsr \$26,exit
-		.end main
-EOF
-	LIBC=""
-	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-	if test "$?" = 0 ; then
-		case `./$dummy` in
-		0-0)	UNAME_MACHINE="alpha" ;;
-		1-0)	UNAME_MACHINE="alphaev5" ;;
-		1-1)    UNAME_MACHINE="alphaev56" ;;
-		1-101)	UNAME_MACHINE="alphapca56" ;;
-		2-303)	UNAME_MACHINE="alphaev6" ;;
-		2-307)	UNAME_MACHINE="alphaev67" ;;
-		esac
-		objdump --private-headers $dummy | \
-		  grep ld.so.1 > /dev/null
-		if test "$?" = 0 ; then
-			LIBC="libc1"
-		fi
-	fi
-	rm -f $dummy.s $dummy
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
 	exit 0 ;;
@@ -877,76 +885,64 @@
 	echo x86_64-unknown-linux-gnu
 	exit 0 ;;
-    i?86:Linux:*:*)
+    i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
 	# problems with other programs or directories called `ld' in the path.
-	ld_supported_emulations=`cd /; ld --help 2>&1 \
-			 | sed -ne '/supported emulations:/!d
+	# Set LC_ALL=C to ensure ld outputs messages in English.
+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
 				    s/[ 	][ 	]*/ /g
-				    s/.*supported emulations: *//
+				    s/.*supported targets: *//
 				    s/ .*//
 				    p'`
-        case "$ld_supported_emulations" in
-	  i?86linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0
-		;;
-	  elf_i?86)
+        case "$ld_supported_targets" in
+	  elf32-i386)
 		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
 		;;
-	  i?86coff)
+	  a.out-i386-linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit 0 ;;
+	  coff-i386)
 		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0
-		;;
-	esac
-	# Either a pre-BFD a.out linker (linux-gnuoldld)
-	# or one that does not give us useful --help.
-	# GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
-	# If ld does not provide *any* "supported emulations:"
-	# that means it is gnuoldld.
-	test -z "$ld_supported_emulations" && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
-	case "${UNAME_MACHINE}" in
-	i?86)
-	  VENDOR=pc;
-	  ;;
-	*)
-	  VENDOR=unknown;
-	  ;;
+		exit 0 ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit 0 ;;
 	esac
 	# Determine whether the default compiler is a.out or elf
-	cat >$dummy.c <<EOF
-#include <features.h>
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __ELF__
-# ifdef __GLIBC__
-#  if __GLIBC__ >= 2
-    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
-#  else
-    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-#  endif
-# else
-   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-# endif
-#else
-  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
-#endif
-  return 0;
-}
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#ifdef __ELF__
+	# ifdef __GLIBC__
+	#  if __GLIBC__ >= 2
+	LIBC=gnu
+	#  else
+	LIBC=gnulibc1
+	#  endif
+	# else
+	LIBC=gnulibc1
+	# endif
+	#else
+	#ifdef __INTEL_COMPILER
+	LIBC=gnu
+	#else
+	LIBC=gnuaout
+	#endif
+	#endif
 EOF
-	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
-	rm -f $dummy.c $dummy
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
 	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
 	;;
-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
-# are messed up and put the nodename in both sysname and nodename.
-    i?86:DYNIX/ptx:4*:*)
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
 	echo i386-sequent-sysv4
 	exit 0 ;;
-    i?86:UNIX_SV:4.2MP:2.*)
+    i*86:UNIX_SV:4.2MP:2.*)
         # Unixware is an offshoot of SVR4, but it has its own version
         # number series starting with 2...
@@ -956,5 +952,22 @@
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
 	exit 0 ;;
-    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit 0 ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit 0 ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit 0 ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit 0 ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
 	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -964,25 +977,24 @@
 	fi
 	exit 0 ;;
-    i?86:*:5:7*)
-        # Fixed at (any) Pentium or better
-        UNAME_MACHINE=i586
-        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
-	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
-	else
-	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
-	fi
-	exit 0 ;;
-    i?86:*:3.2:*)
+    i*86:*:5:[78]*)
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit 0 ;;
+    i*86:*:3.2:*)
 	if test -f /usr/options/cb.name; then
 		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
 		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
 	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
 			&& UNAME_MACHINE=i586
-		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
 			&& UNAME_MACHINE=i686
-		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
 			&& UNAME_MACHINE=i686
 		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
@@ -990,7 +1002,4 @@
 		echo ${UNAME_MACHINE}-pc-sysv32
 	fi
-	exit 0 ;;
-    i?86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
 	exit 0 ;;
     pc:*:*:*)
@@ -1017,7 +1026,13 @@
 	echo m68010-convergent-sysv
 	exit 0 ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit 0 ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit 0 ;;
     M68*:*:R3V[567]*:*)
 	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
@@ -1030,5 +1045,5 @@
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
           && echo i486-ncr-sysv4 && exit 0 ;;
-    m68*:LynxOS:2.*:*)
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
 	exit 0 ;;
@@ -1036,7 +1051,4 @@
 	echo m68k-atari-sysv4
 	exit 0 ;;
-    i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
     TSUNAMI:LynxOS:2.*:*)
 	echo sparc-unknown-lynxos${UNAME_RELEASE}
@@ -1045,5 +1057,5 @@
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
 	exit 0 ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:*)
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
 	exit 0 ;;
@@ -1065,6 +1077,6 @@
 	fi
 	exit 0 ;;
-    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
         echo i586-unisys-sysv4
         exit 0 ;;
@@ -1078,4 +1090,8 @@
 	echo i860-stratus-sysv4
 	exit 0 ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit 0 ;;
     mc68*:A/UX:*:*)
 	echo m68k-apple-aux${UNAME_RELEASE}
@@ -1106,4 +1122,7 @@
 	echo sx5-nec-superux${UNAME_RELEASE}
 	exit 0 ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
@@ -1113,16 +1132,22 @@
 	exit 0 ;;
     *:Darwin:*:*)
-	echo `uname -p`-apple-darwin${UNAME_RELEASE}
+	case `uname -p` in
+	    *86) UNAME_PROCESSOR=i686 ;;
+	    powerpc) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit 0 ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	if test "${UNAME_MACHINE}" = "x86pc"; then
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
 		UNAME_MACHINE=pc
 	fi
-	echo `uname -p`-${UNAME_MACHINE}-nto-qnx
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
 	exit 0 ;;
     *:QNX:*:4*)
 	echo i386-pc-qnx
 	exit 0 ;;
-    NSR-[KW]:NONSTOP_KERNEL:*:*)
+    NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
 	exit 0 ;;
@@ -1147,9 +1172,4 @@
 	echo ${UNAME_MACHINE}-unknown-plan9
 	exit 0 ;;
-    i?86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit 0 ;;
     *:TOPS-10:*:*)
 	echo pdp10-unknown-tops10
@@ -1175,4 +1195,5 @@
 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
 
+eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
@@ -1289,6 +1310,5 @@
 EOF
 
-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
-rm -f $dummy.c $dummy
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
 
 # Apollos put the system type in the environment.
Index: trunk/src/binutils/config.if
===================================================================
--- trunk/src/binutils/config.if	(revision 604)
+++ trunk/src/binutils/config.if	(revision 606)
@@ -3,7 +3,6 @@
 # determine:
 #
-#	1. libstcxx_interface: the interface name for libstdc++.
-#	2. cxx_interface: the interface name for c++.
-#	3. libc_interface: the interface name for libc.
+#	1. libstcxx_incdir: the interface name for libstdc++.
+#	2. libc_interface: the interface name for libc.
 #
 
@@ -22,23 +21,19 @@
 fi
 
-if [ "${enable_libstdcxx_v3}" = "yes" ] ; then
-  libstdcxx_srcdir=${if_topsrcdir}/libstdc++-v3
-else
-  libstdcxx_srcdir=${if_topsrcdir}/libstdc++
+# Set libstdcxx_incdir.
+# This is the same as gcc/configure.in and libstdc++-v3/acinclude.m4. 
+if test -z "$gcc_version"; then
+  if test -z "${gcc_version_trigger}" \
+     && test -f ${if_topsrcdir}/gcc/version.c; then
+    gcc_version_trigger=${if_topsrcdir}/gcc/version.c
+  fi    
+  if test -f "${gcc_version_trigger}"; then
+    gcc_version_full=`grep version_string "${gcc_version_trigger}" | sed -e 's/.*"\([^"]*\)".*/\1/'`
+  else
+    gcc_version_full=`$CC -v 2>&1 | sed -n 's/^gcc version //p'`
+  fi
+  gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'`
 fi
-
-if [ -f ${libstdcxx_srcdir}/Makefile.in ]; then
-# We check libstdc++ for libstdcxx_interface.
-libstdcxx_interface=`grep "^INTERFACE" ${libstdcxx_srcdir}/Makefile.in | sed 's/INTERFACE[ 	]*=[ 	]*\(.*\)/\1/'`
-else
-libstdcxx_interface=
-fi
-
-if [ -f ${if_topsrcdir}/gcc/cp/Makefile.in ]; then
-# We check gcc/cp for cxx_interface.
-cxx_interface=`grep "^INTERFACE" ${if_topsrcdir}/gcc/cp/Makefile.in | sed 's/INTERFACE[ 	]*=[ 	]*\(.*\)/\1/'`
-else
-cxx_interface=
-fi
+libstdcxx_incdir=c++/${gcc_version}
 
 # The trickiest part is libc_interface.
Index: trunk/src/binutils/config.sub
===================================================================
--- trunk/src/binutils/config.sub	(revision 604)
+++ trunk/src/binutils/config.sub	(revision 606)
@@ -1,8 +1,8 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-#   Free Software Foundation, Inc.
-
-timestamp='2001-03-19'
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+timestamp='2003-05-09'
 
 # This file is (in principle) common to ALL GNU software.
@@ -30,5 +30,6 @@
 # the same distribution terms that you use for the rest of that program.
 
-# Please send patches to <config-patches@gnu.org>.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
@@ -118,5 +119,5 @@
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | storm-chaos* | os2-emx*)
+  nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
@@ -158,4 +159,12 @@
 		basic_machine=$1
 		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+ 	-chorusrdb)
+ 		os=-chorusrdb
+		basic_machine=$1
+ 		;;
 	-hiux*)
 		os=-hiuxwe2
@@ -216,23 +225,46 @@
 	# Recognize the basic CPU types without company name.
 	# Some are omitted here because they have special meanings below.
-	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \
-	        | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \
-		| pyramid | mn10200 | mn10300 | tron | a29k \
-		| 580 | i960 | h8300 \
-		| x86 | ppcbe | mipsbe | mipsle | shbe | shle \
-		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
-		| hppa64 \
-		| alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
-		| alphaev6[78] \
-		| we32k | ns16k | clipper | i370 | sh | sh[34] \
-		| powerpc | powerpcle \
-		| 1750a | dsp16xx | pdp10 | pdp11 \
-		| mips16 | mips64 | mipsel | mips64el \
-		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
-		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
-		| mips64vr5000 | miprs64vr5000el | mcore | s390 | s390x \
-		| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
-		| thumb | d10v | d30v | fr30 | avr | openrisc | tic80 \
-		| pj | pjl | h8500)
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k \
+	| m32r | m68000 | m68k | m88k | mcore \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64vr | mips64vrel \
+	| mips64orion | mips64orionel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| msp430 \
+	| ns16k | ns32k \
+	| openrisc | or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| pyramid \
+	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
+	| strongarm \
+	| tahoe | thumb | tic80 | tron \
+	| v850 | v850e \
+	| we32k \
+	| x86 | xscale | xstormy16 | xtensa \
+	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
@@ -242,5 +274,5 @@
 		os=-none
 		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | w65)
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
 
@@ -248,5 +280,5 @@
 	# because (1) that's what they normally are, and
 	# (2) the word "unknown" tends to confuse beginning users.
-	i[234567]86 | x86_64)
+	i*86 | x86_64)
 	  basic_machine=$basic_machine-pc
 	  ;;
@@ -257,28 +289,58 @@
 		;;
 	# Recognize the basic CPU types with company name.
-	# FIXME: clean up the formatting here.
-	vax-* | tahoe-* | i[234567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
-	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \
-	      | arm-*  | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \
-	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
-	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
-	      | xmp-* | ymp-* \
-	      | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \
-	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
-	      | hppa2.0n-* | hppa64-* \
-	      | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
-	      | alphaev6[78]-* \
-	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
-	      | clipper-* | orion-* \
-	      | sparclite-* | pdp10-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
-	      | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
-	      | mips64el-* | mips64orion-* | mips64orionel-* \
-	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
-	      | mipstx39-* | mipstx39el-* | mcore-* \
-	      | f30[01]-* | f700-* | s390-* | s390x-* | sv1-* | t3e-* \
-	      | [cjt]90-* \
-	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
-	      | thumb-* | v850-* | d30v-* | tic30-* | tic80-* | c30-* | fr30-* \
-	      | bs2000-* | tic54x-* | c54x-* | x86_64-* | pj-* | pjl-*)
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* \
+	| bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| clipper-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* \
+	| m32r-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | mcore-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39-* | mipstx39el-* \
+	| msp430-* \
+	| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| pyramid-* \
+	| romp-* | rs6000-* \
+	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
+	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tron-* \
+	| v850-* | v850e-* | vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
+	| xtensa-* \
+	| ymp-* \
+	| z8k-*)
 		;;
 	# Recognize the various machine names and aliases which stand
@@ -312,4 +374,7 @@
 		os=-bsd
 		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
 	amdahl)
 		basic_machine=580-amdahl
@@ -343,4 +408,8 @@
 		os=-dynix
 		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
 	convex-c1)
 		basic_machine=c1-convex
@@ -363,14 +432,6 @@
 		os=-bsd
 		;;
-	cray | ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	cray2)
-		basic_machine=cray2-cray
-		os=-unicos
-		;;
-	[cjt]90)
-		basic_machine=${basic_machine}-cray
+	cray | j90)
+		basic_machine=j90-cray
 		os=-unicos
 		;;
@@ -386,4 +447,12 @@
 	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
 		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
 		;;
 	delta | 3300 | motorola-3300 | motorola-delta \
@@ -507,17 +576,17 @@
 		;;
 # I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i[34567]86v32)
+	i*86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
 		;;
-	i[34567]86v4*)
+	i*86v4*)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv4
 		;;
-	i[34567]86v)
+	i*86v)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv
 		;;
-	i[34567]86sol2)
+	i*86sol2)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-solaris2
@@ -567,12 +636,4 @@
 		os=-mint
 		;;
-	mipsel*-linux*)
-		basic_machine=mipsel-unknown
-		os=-linux-gnu
-		;;
-	mips*-linux*)
-		basic_machine=mips-unknown
-		os=-linux-gnu
-		;;
 	mips3*-*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
@@ -588,4 +649,8 @@
 		basic_machine=m68k-rom68k
 		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
 		;;
 	msdos)
@@ -661,4 +726,8 @@
 		basic_machine=np1-gould
 		;;
+	nv1)
+		basic_machine=nv1-cray
+		os=-unicosmp
+		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
@@ -668,4 +737,8 @@
 		os=-proelf
 		;;
+	or32 | or32-*)
+		basic_machine=or32-unknown
+		os=-coff
+		;;
 	OSE68000 | ose68000)
 		basic_machine=m68000-ericsson
@@ -690,11 +763,11 @@
 		basic_machine=m68k-tti
 		;;
-        pc532 | pc532-*)
+	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
-	pentium | p5 | k5 | k6 | nexgen)
+	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
-	pentiumpro | p6 | 6x86 | athlon)
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
 		basic_machine=i686-pc
 		;;
@@ -702,5 +775,5 @@
 		basic_machine=i686-pc
 		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-*)
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
 		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
@@ -717,12 +790,22 @@
 		;;
 	ppc)	basic_machine=powerpc-unknown
-	        ;;
+		;;
 	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	ppcle | powerpclittle | ppc-le | powerpc-little)
 		basic_machine=powerpcle-unknown
-	        ;;
+		;;
 	ppcle-* | powerpclittle-*)
 		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	ps2)
@@ -743,8 +826,20 @@
 		basic_machine=romp-ibm
 		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
 	sa29200)
 		basic_machine=a29k-amd
 		os=-udi
 		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
 	sequent)
 		basic_machine=i386-sequent
@@ -754,5 +849,5 @@
 		os=-hms
 		;;
-	sparclite-wrs)
+	sparclite-wrs | simso-wrs)
 		basic_machine=sparclite-wrs
 		os=-vxworks
@@ -821,6 +916,14 @@
 		;;
 	t3e)
-		basic_machine=t3e-cray
+		basic_machine=alphaev5-cray
 		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+        tic4x | c4x*)
+		basic_machine=tic4x-unknown
+		os=-coff
 		;;
 	tic54x | c54x*)
@@ -828,4 +931,12 @@
 		os=-coff
 		;;
+	tic55x | c55x*)
+		basic_machine=tic55x-unknown
+		os=-coff
+		;;
+	tic6x | c6x*)
+		basic_machine=tic6x-unknown
+		os=-coff
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
@@ -833,4 +944,8 @@
 	tx39el)
 		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
 		;;
 	tower | tower-32)
@@ -858,6 +973,6 @@
 		;;
 	vpp*|vx|vx-*)
-               basic_machine=f301-fujitsu
-               ;;
+		basic_machine=f301-fujitsu
+		;;
 	vxworks960)
 		basic_machine=i960-wrs
@@ -880,10 +995,10 @@
 		os=-proelf
 		;;
-	xmp)
-		basic_machine=xmp-cray
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	ymp)
+		basic_machine=ymp-cray
 		os=-unicos
-		;;
-        xps | xps100)
-		basic_machine=xps100-honeywell
 		;;
 	z8k-*-coff)
@@ -907,11 +1022,4 @@
 		basic_machine=hppa1.1-oki
 		;;
-	mips)
-		if [ x$os = x-linux-gnu ]; then
-			basic_machine=mips-unknown
-		else
-			basic_machine=mips-mips
-		fi
-		;;
 	romp)
 		basic_machine=romp-ibm
@@ -933,11 +1041,14 @@
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4)
+	sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sparc | sparcv9)
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparc | sparcv9 | sparcv9b)
 		basic_machine=sparc-sun
 		;;
-        cydra)
+	cydra)
 		basic_machine=cydra-cydrome
 		;;
@@ -954,7 +1065,6 @@
 		basic_machine=powerpc-apple
 		;;
-	c4x*)
-		basic_machine=c4x-none
-		os=-coff
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
 		;;
 	*)
@@ -1014,14 +1124,18 @@
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
 	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*)
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
 		case $basic_machine in
-		    x86-* | i[34567]86-*)
+		    x86-* | i*86-*)
 			;;
 		    *)
@@ -1030,6 +1144,8 @@
 		esac
 		;;
+	-nto-qnx*)
+		;;
 	-nto*)
-		os=-nto-qnx
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
@@ -1070,4 +1186,7 @@
 		os=-aos
 		;;
+	-atheos*)
+		os=-atheos
+		;;
 	-386bsd)
 		os=-bsd
@@ -1076,6 +1195,9 @@
 		os=-sysv
 		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
 	-ns2 )
-	        os=-nextstep2
+		os=-nextstep2
 		;;
 	-nsk*)
@@ -1116,6 +1238,12 @@
 		os=-xenix
 		;;
-        -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-	        os=-mint
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
 		;;
 	-none)
@@ -1150,8 +1278,9 @@
 		os=-aout
 		;;
+	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
 		;;
-        pdp11-*)
+	pdp11-*)
 		os=-none
 		;;
@@ -1180,4 +1309,7 @@
 		os=-elf
 		;;
+	or32-*)
+		os=-coff
+		;;
 	*-tti)	# must be before sparc entry or we get the wrong os.
 		os=-sysv3
@@ -1243,8 +1375,8 @@
 		os=-nextstep3
 		;;
-        *-gould)
+	*-gould)
 		os=-sysv
 		;;
-        *-highlevel)
+	*-highlevel)
 		os=-bsd
 		;;
@@ -1252,8 +1384,8 @@
 		os=-bsd
 		;;
-        *-sgi)
+	*-sgi)
 		os=-irix
 		;;
-        *-siemens)
+	*-siemens)
 		os=-sysv4
 		;;
@@ -1327,5 +1459,5 @@
 				vendor=sequent
 				;;
-			-vxsim* | -vxworks*)
+			-vxsim* | -vxworks* | -windiss*)
 				vendor=wrs
 				;;
@@ -1341,4 +1473,7 @@
 			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
 				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
 				;;
 		esac
Index: trunk/src/binutils/configure
===================================================================
--- trunk/src/binutils/configure	(revision 604)
+++ trunk/src/binutils/configure	(revision 606)
@@ -1,92 +1,45 @@
-#!/bin/sh
-
-### WARNING: this file contains embedded tabs.  Do not run untabify on this file.
-
-# Configuration script
-# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# This file was originally written by K. Richard Pixley.
-
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.13 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
-# Shell script to create proper links to machine-dependent files in
-# preparation for compilation.
-#
-# If configure succeeds, it leaves its status in config.status.
-# If configure fails after disturbing the status quo, 
-#       config.status is removed.
-#
-
-export PATH || (echo "OOPS, this isn't sh.  Desperation time.  I will feed myself to sh."; sh $0 $argv; kill $$)
-
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-
-#for Test
-#remove="echo rm"
-#hard_link="echo ln"
-#symbolic_link="echo ln -s"
-
-# clear some things potentially inherited from environment.
-
-Makefile=Makefile
-Makefile_in=Makefile.in
-arguments=
-build_alias=
-cache_file=config.cache
-cache_file_option=
-configdirs=
-extraconfigdirs=
-diroptions=
-exec_prefix=
-exec_prefixoption=
-fatal=
-floating_point=default
-gas=default
-gcc_version=
-gcc_version_trigger=
-host_alias=NOHOST
-host_makefile_frag=
-moveifchange=
-norecursion=
-other_options=
-package_makefile_frag=
-package_makefile_rules_frag=
-prefix=/usr/local
-progname=
-program_prefix=
-program_prefixoption=
-program_suffix=
-program_suffixoption=
-program_transform_name=
-program_transform_nameoption=
-redirect=
-removing=
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+  --disable-serial-[{host,target,build}-]configure
+                          Don't force sequential configuration of
+                          sub-packages for the host, target or build
+			  machine, or of any sub-packages at all"
+ac_help="$ac_help
+  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
 site=
-site_makefile_frag=
-site_option=
 srcdir=
-srctrigger=
-subdirs=
-target_alias=NOTARGET
-target_makefile_frag=
-undefs=NOUNDEFS
-version="$Revision: 1.11 $"
-x11=default
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
@@ -102,6 +55,636 @@
 mandir='${prefix}/man'
 
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.13"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=move-if-change
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:581: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:602: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:620: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+if test "$program_transform_name" = s,x,x,; then
+  program_transform_name=
+else
+  # Double any \ or $.  echo might interpret backslashes.
+  cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+  rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+
+# Autoconf M4 include file defining utility macros for complex Canadian
+# cross builds.
+
+####
+# _NCN_TOOL_PREFIXES:  Some stuff that oughtta be done in AC_CANONICAL_SYSTEM 
+# or AC_INIT.
+# These demand that AC_CANONICAL_SYSTEM be called beforehand.
+ 
+####
+# NCN_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
+# Like AC_CHECK_TOOL, but tries a prefix of the target, not the host.
+# Code is pretty much lifted from autoconf2.53.
+
+ 
+
+####
+# NCN_STRICT_CHECK_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
+# Like AC_CHECK_TOOL, but requires the prefix if build!=host.
+
+ 
+
+####
+# NCN_STRICT_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
+# Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target.
+
+ 
+
 ### we might need to use some other shell than /bin/sh for running subshells
-
 ### If we are on Windows, search for the shell.  This will permit people
 ### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
@@ -110,7 +693,7 @@
 case "${OSTYPE}" in
 *win32*)
-  if [ x${CONFIG_SHELL} = x ]; then
-    if [ ! -f /bin/sh ]; then
-      if [ x${SHELL} != x ] && [ -f ${SHELL} ]; then
+  if test x${CONFIG_SHELL} = x ; then
+    if test ! -f /bin/sh ; then
+      if test x${SHELL} != x && test -f ${SHELL} ; then
 	CONFIG_SHELL=${SHELL}
 	export CONFIG_SHELL
@@ -137,643 +720,1207 @@
 config_shell=${CONFIG_SHELL-/bin/sh}
 
-NO_EDIT="This file was generated automatically by configure.  Do not edit."
-
-## this is a little touchy and won't always work, but...
-##
-## if the argv[0] starts with a slash then it is an absolute name that can (and
-## must) be used as is.
-##
-## otherwise, if argv[0] has no slash in it, we can assume that it is on the
-## path.  Since PATH might include "." we also add `pwd` to the end of PATH.
-##
-
 progname=$0
 # if PWD already has a value, it is probably wrong.
-if [ -n "$PWD" ]; then PWD=`pwd`; fi
-
-case "${progname}" in
-/*) ;;
-*/*) ;;
-*)
-        PATH=$PATH:${PWD=`pwd`} ; export PATH
-        ;;
-esac
-
-# Loop over all args
-
-while :
-do
-
-# Break out if there are no more args
-	case $# in
-	0)
-		break
-		;;
-	esac
-
-# Get the first arg, and shuffle
-	option=$1
-	shift
-
-# Make all options have two hyphens
-	orig_option=$option	# Save original for error messages
-	case $option in
-	--*) ;;
-	-*) option=-$option ;;
-	esac
-		
-# Split out the argument for options that take them
-	case $option in
-	--*=*)
-		optarg=`echo $option | sed -e 's/^[^=]*=//'`
-		arguments="$arguments $option"
-		;;
-# These options have mandatory values.  Since we didn't find an = sign,
-# the value must be in the next argument
-	--bu* | --cache* | --ex* | --ho* | --pre* | --program-p* | --program-s* | --program-t* | --si* | --sr* | --ta* | --tm* | --x-* | --bi* | --sb* | --li* | --da* | --sy* | --sh* | --lo* | --in* | --ol* | --ma*)
-		optarg=$1
-		shift
-		arguments="$arguments $option=$optarg"
-		;;
-	--v)
-		arguments="$arguments -v"
-		;;
-	--*)
-		arguments="$arguments $option"
-		;;
-	esac
-
-# Now, process the options
-	case $option in
-
-	--bi*)
-		bindir=$optarg
-		diroptions="$diroptions --bindir=$optarg"
-		;;
-	--build* | --bu*)
-		case "$build_alias" in
-		"") build_alias=$optarg ;;
-		*) echo '***' Can only configure for one build machine at a time.  1>&2
-		   fatal=yes
-		   ;;
-		esac
-		;;
-	--cache*)
-		cache_file=$optarg
-		;;
-	--da*)
-		datadir=$optarg
-		diroptions="$diroptions --datadir=$optarg"
-		;;
-	--disable-*)
-		enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
-		eval $enableopt=no
-		disableoptions="$disableoptions $option"
-		;;
-	--enable-*)
-		case "$option" in
-		*=*)	;;
-		*)	optarg=yes ;;
-		esac
-
-		enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
-		eval "$enableopt=\$optarg"
-		enableoptions="$enableoptions '$option'"
-		;;
-	--exec-prefix* | --ex*)
-		exec_prefix=$optarg
-		exec_prefixoption="--exec-prefix=$optarg"
-		;;
-	--gas | --g*)
-		gas=yes
-		;;
-	--help | --he*)
-		fatal=yes
-		;;
-	--host* | --ho*)
-		case $host_alias in
-		NOHOST) host_alias=$optarg ;;
-		*) echo '***' Can only configure for one host at a time.  1>&2
-		   fatal=yes
-		   ;;
-		esac
-		;;
-	--inc*)
-		includedir=$optarg
-		diroptions="$diroptions --includedir=$optarg"
-		;;
-	--inf*)
-		infodir=$optarg
-		diroptions="$diroptions --infodir=$optarg"
-		;;
-	--libd*)
-		libdir=$optarg
-		diroptions="$diroptions --libdir=$optarg"
-		;;
-	--libe*)
-		libexecdir=$optarg
-		diroptions="$diroptions --libexecdir=$optarg"
-		;;
-	--lo*)
-		localstatedir=$optarg
-		diroptions="$diroptions --localstatedir=$optarg"
-		;;
-	--ma*)
-		mandir=$optarg
-		diroptions="$diroptions --mandir=$optarg"
-		;;
-	--nfp | --nf*)
-		floating_point=no
-		floating_pointoption="--nfp"
-		;;
-	--norecursion | --no*)
-		norecursion=yes
-		;;
-	--ol*)
-		oldincludedir=$optarg
-		diroptions="$diroptions --oldincludedir=$optarg"
-		;;
-	--prefix* | --pre*)
-		prefix=$optarg
-		prefixoption="--prefix=$optarg"
-		;;
-	--program-prefix* | --program-p*)
-		program_prefix=$optarg
-		program_prefixoption="--program-prefix=$optarg"
-		;;
-	--program-suffix* | --program-s*)
-		program_suffix=$optarg
-		program_suffixoption="--program-suffix=$optarg"
-		;;
-	--program-transform-name* | --program-t*)
-		# Double any backslashes or dollar signs in the argument
-		program_transform_name="${program_transform_name} -e `echo ${optarg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
-		program_transform_nameoption="${program_transform_nameoption} --program-transform-name='$optarg'"
-		;;
-	--rm)
-		removing=--rm
-		;;
-	--sb*)
-		sbindir=$optarg
-		diroptions="$diroptions --sbindir=$optarg"
-		;;
-	--sh*)
-		sharedstatedir=$optarg
-		diroptions="$diroptions --sharedstatedir=$optarg"
-		;;
-	--silent | --sil* | --quiet | --q*)
-		redirect=">/dev/null"
-		verbose=--silent
-		;;
-	--site* | --sit*)
-		site=$optarg
-		site_option="--site=$optarg"
-		;;
-	--srcdir*/ | --sr*/)
-                # Remove trailing slashes.  Otherwise, when the file name gets
-                # bolted into an object file as debug info, it has two slashes
-                # in it.  Ordinarily this is ok, but emacs takes double slash
-                # to mean "forget the first part".
-		srcdir=`echo $optarg | sed -e 's:/$::'`
-		;;
-	--srcdir* | --sr*)
-		srcdir=$optarg
-		;;
-	--sy*)
-		sysconfdir=$optarg
-		diroptions="$diroptions --sysconfdir=$optarg"
-		;;
-	--target* | --ta*)
-		case $target_alias in
-		NOTARGET) target_alias=$optarg ;;
-		*) echo '***' Can only configure for one target at a time.  1>&2
-		   fatal=yes
-		   ;;
-		esac
-		;;
-	--tmpdir* | --tm*)
-		TMPDIR=$optarg
-		tmpdiroption="--tmpdir=$optarg"
-		;;
-	--verbose | --v | --verb*)
-		redirect=
-		verbose=--verbose
-		;;
-	--version | --V | --vers*)
-		echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'`
-		exit 0
-		;;
-	--with-*)
-		case "$option" in
-		*=*)	;;
-		*)	optarg=yes ;;
-		esac
-
-		withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
-		eval $withopt="\$optarg"
-		withoptions="$withoptions $option"
-		;;
-	--without-*)
-		withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
-		eval $withopt=no
-		withoutoptions="$withoutoptions $option"
-		;;
-	--x)	with_x=yes
-		withoptions="$withoptions --with-x"
-		;;
-	--x-i* | --x-l*) other_options="$other_options $orig_option"
-		;;
-	--*)
-		echo "configure: Unrecognized option: \"$orig_option\"; use --help for usage." >&2
-		exit 1
-		;;
-	*)
-		case $undefs in
-		NOUNDEFS) undefs=$option ;;
-		*) echo '***' Can only configure for one host and one target at a time.  1>&2
-		   fatal=yes
-		   ;;
-		esac
-		;;
-	esac
-done
-
-# process host and target
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET UNDEFS
-#
-# The rules are:
-# 1. You aren't allowed to specify --host, --target, and undefs at the
-#    same time.
-# 2. Host defaults to undefs.
-# 3. If undefs is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target defaults to undefs.
-# 5. If undefs is not specified, then target defaults to host.
-
-case "${fatal}" in
-"")
-	# Make sure that host, target & undefs aren't all specified at the
-	# same time.
-	case $host_alias---$target_alias---$undefs in
-	NOHOST---*---* | *---NOTARGET---* | *---*---NOUNDEFS)
-		;;
-	*) echo '***' Can only configure for one host and one target at a time.  1>&2
-	   fatal=yes
-	   break 2
-		;;
-	esac
-
-	# Now, do defaulting for host.
-	case $host_alias in
-	NOHOST)
-		case $undefs in
-		NOUNDEFS)
-			# Neither --host option nor undefs were present.
-			# Call config.guess.
-			guesssys=`echo ${progname} | sed 's/configure$/config.guess/'`
-			if host_alias=`${config_shell} ${guesssys}`
-			then
-				# If the string we are going to use for
-				# the target is a prefix of the string
-				# we just guessed for the host, then
-				# assume we are running native, and force
-				# the same string for both target and host.
-				case $target_alias in
-				NOTARGET) ;;
-				*)
-					if expr $host_alias : $target_alias >/dev/null
-					then
-						host_alias=$target_alias
-					fi
-					;;
-				esac
-				echo "Configuring for a ${host_alias} host." 1>&2
-				arguments="--host=$host_alias $arguments"
-			else
-				echo 'Config.guess failed to determine the host type.  You need to specify one.' 1>&2
-				fatal=yes
-			fi
-			;;
-		*)
-			host_alias=$undefs
-			arguments="--host=$host_alias $arguments"
-			undefs=NOUNDEFS
-			;;
-		esac
-	esac
-
-	# Do defaulting for target.  If --target option isn't present, default
-	# to undefs.  If undefs isn't present, default to host.
-	case $target_alias in
-	NOTARGET)
-		case $undefs in
-		NOUNDEFS)
-			target_alias=$host_alias
-			;;
-		*)
-			target_alias=$undefs
-			arguments="--target=$target_alias $arguments"
-			;;
-		esac
-	esac
-	;;
-*) ;;
-esac
-
-if [ -n "${fatal}" -o "${host_alias}" = "help" ] ; then
-	exec 1>&2
-	echo Usage: configure [OPTIONS] [HOST]
-	echo
-	echo Options: [defaults in brackets]
-	echo ' --prefix=MYDIR		 install into MYDIR [/usr/local]'
-	echo ' --exec-prefix=MYDIR	 install host-dependent files into MYDIR [/usr/local]'
-	echo ' --help			 print this message [normal config]'
-	echo ' --build=BUILD		 configure for building on BUILD [BUILD=HOST]'
-	echo ' --host=HOST		 configure for HOST [determined via config.guess]'
-	echo ' --norecursion		 configure this directory only [recurse]'
-	echo ' --program-prefix=FOO	 prepend FOO to installed program names [""]'
-	echo ' --program-suffix=FOO	 append FOO to installed program names [""]'
-	echo ' --program-transform-name=P transform installed names by sed pattern P [""]'
-	echo ' --site=SITE		 configure with site-specific makefile for SITE'
-	echo ' --srcdir=DIR		 find the sources in DIR [. or ..]'
-	echo ' --target=TARGET	 configure for TARGET [TARGET=HOST]'
-	echo ' --tmpdir=TMPDIR	 create temporary files in TMPDIR [/tmp]'
-	echo ' --nfp			 configure for software floating point [hard float]'
-	echo ' --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)'
-	echo ' --without-FOO		 package FOO is NOT available'
-	echo ' --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)'
-	echo ' --disable-FOO		 do not include feature FOO'
-	echo
-	echo 'Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.'
-	echo
-	if [ -r config.status ] ; then
-		cat config.status
-	fi
-
-	exit 1
-fi
-
-configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
-moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
-## the sed command below emulates the dirname command
-topsrcdir=`cd \`echo ${progname} | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'\`; pwd`
-
-
-# this is a hack.  sun4 must always be a valid host alias or this will fail.
-if ${config_shell} ${configsub} sun4 >/dev/null 2>&1 ; then
-        true
-else
-        echo '***' cannot find config.sub.  1>&2
-        exit 1
-fi
-
-touch config.junk
-if ${config_shell} ${moveifchange} config.junk config.trash ; then
-        true
-else
-        echo '***' cannot find move-if-change.  1>&2
-        exit 1
-fi
-rm -f config.junk config.trash
-
-case "${srcdir}" in
-"")
-        if [ -r configure.in ] ; then
-                srcdir=.
-        else
-                if [ -r ${progname}.in ] ; then
-                        srcdir=`echo ${progname} | sed 's:/configure$::'`
-                else
-                        echo '***' "Can't find configure.in.  Try using --srcdir=some_dir"  1>&2
-                        exit 1
-                fi
-        fi
-        ;;
-*)
-	# Set srcdir to "." if that's what it is.
-	# This is important for multilib support.
-	if [ ! -d ${srcdir} ] ; then
-		echo "Invalid source directory ${srcdir}" >&2
-		exit 1
-	fi
-	pwd=`pwd`
-	srcpwd=`cd ${srcdir} ; pwd`
-	if [ "${pwd}" = "${srcpwd}" ] ; then
-		srcdir=.
-	fi
-esac
-
-### warn about some conflicting configurations.
-
-case "${srcdir}" in
-".") ;;
-*)
-        if [ -f ${srcdir}/config.status ] ; then
-                echo '***' Cannot configure here in \"${PWD=`pwd`}\" when \"${srcdir}\" is currently configured. 1>&2
-                exit 1
-        fi
-esac
-
-# default exec_prefix
-case "${exec_prefixoption}" in
-"") exec_prefix="\$(prefix)" ;;
-*) ;;
-esac
-
+if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
+
+# Export original configure arguments for use by sub-configures.
+TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
+
+
+moveifchange=${srcdir}/move-if-change
+
+# Set srcdir to "." if that's what it is.
+# This is important for multilib support.
+pwd=`${PWDCMD-pwd}`
+srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
+if test "${pwd}" = "${srcpwd}" ; then
+  srcdir=.
+fi
+
+topsrcdir=$srcpwd
+
+extra_host_args=
 # Define the trigger file to make sure configure will re-run whenever
 # the gcc version number changes.
-if [ "${with_gcc_version_trigger+set}" = set ]; then
-    gcc_version_trigger="$with_gcc_version_trigger"
-    gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
-else
-    # If gcc's sources are available, define the trigger file.
-    if [ -f ${topsrcdir}/gcc/version.c ] ; then
-	gcc_version_trigger=${topsrcdir}/gcc/version.c
-	gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
-	case "$arguments" in
-	  *--with-gcc-version-trigger=$gcc_version_trigger* )
-	    ;;
-	  * )
-	    # Make sure configure.in knows about this.
-	    arguments="--with-gcc-version-trigger=$gcc_version_trigger $arguments"
+if test "${with_gcc_version_trigger+set}" = set ; then
+  gcc_version_trigger="$with_gcc_version_trigger"
+  gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
+else
+  # If gcc's sources are available, define the trigger file.
+  if test -f ${topsrcdir}/gcc/version.c ; then
+    gcc_version_trigger=${topsrcdir}/gcc/version.c
+    gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
+    case "$ac_configure_args" in
+      *--with-gcc-version-trigger=$gcc_version_trigger* )
+        ;;
+      * )
+        # Add to all subconfigure arguments: build, host, and target.
+        ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
+        ;;
+    esac
+  fi
+fi
+
+### To add a new directory to the tree, first choose whether it is a target
+### or a host dependent tool.  Then put it into the appropriate list
+### (library or tools, host or target), doing a dependency sort.
+
+# Subdirs will be configured in the order listed in build_configdirs, 
+# configdirs, or target_configdirs; see the serialization section below.
+
+# Dependency sorting is only needed when *configuration* must be done in 
+# a particular order.  In all cases a dependency should be specified in 
+# the Makefile, whether or not it's implicitly specified here.
+
+# Double entries in build_configdirs, configdirs, or target_configdirs may
+# cause circular dependencies and break everything horribly.
+
+# these libraries are used by various programs built for the host environment
+#
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib"
+
+# these tools are built for the host environment
+# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
+# know that we are building the simulator.
+# binutils, gas and ld appear in that order because it makes sense to run
+# "make check" in that particular order.
+host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
+
+# libgcj represents the runtime libraries only used by gcj.
+libgcj="target-libffi \
+	target-boehm-gc \
+	target-zlib \
+	target-qthreads \
+	target-libjava"
+
+# these libraries are built for the target environment, and are built after
+# the host libraries and the host tools (which may be a cross compiler)
+#
+target_libs="target-libiberty \
+		target-libgloss \
+		target-newlib \
+		target-libstdc++-v3 \
+		target-libf2c \
+		${libgcj} \
+		target-libobjc"
+
+# these tools are built using the target libs, and are intended to run only
+# in the target environment
+#
+# note: any program that *uses* libraries that are in the "target_libs"
+# list belongs in this list.  those programs are also very likely
+# candidates for the "native_only" list which follows
+#
+target_tools="target-examples target-groff target-gperf target-rda"
+
+################################################################################
+
+## All tools belong in one of the four categories, and are assigned above
+## We assign ${configdirs} this way to remove all embedded newlines.  This
+## is important because configure will choke if they ever get through.
+## ${configdirs} is directories we build using the host tools.
+## ${target_configdirs} is directories we build using the target tools.
+#
+configdirs=`echo ${host_libs} ${host_tools}`
+target_configdirs=`echo ${target_libs} ${target_tools}`
+
+################################################################################
+
+srcname="gnu development package"
+
+# This gets set non-empty for some net releases of packages.
+appdirs=""
+
+# Define is_cross_compiler to save on calls to 'test'.
+is_cross_compiler=
+if test x"${host}" = x"${target}" ; then
+  is_cross_compiler=no
+else
+  is_cross_compiler=yes
+fi	
+
+# We always want to use the same name for this directory, so that dejagnu
+# can reliably find it.
+target_subdir=${target_alias}
+
+if test ! -d ${target_subdir} ; then
+  if mkdir ${target_subdir} ; then true
+  else
+    echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
+    exit 1
+  fi
+fi
+
+build_prefix=build-
+build_subdir=${build_prefix}${build_alias}
+
+if test x"${build_alias}" != x"${host}" ; then
+  if test ! -d ${build_subdir} ; then
+    if mkdir ${build_subdir} ; then true
+    else
+      echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
+      exit 1
+    fi
+  fi
+fi
+
+# Skipdirs are removed silently.
+skipdirs=
+# Noconfigdirs are removed loudly.
+noconfigdirs=""
+
+use_gnu_ld=
+# Make sure we don't let GNU ld be added if we didn't want it.
+if test x$with_gnu_ld = xno ; then
+  use_gnu_ld=no
+  noconfigdirs="$noconfigdirs ld"
+fi
+
+use_gnu_as=
+# Make sure we don't let GNU as be added if we didn't want it.
+if test x$with_gnu_as = xno ; then
+  use_gnu_as=no
+  noconfigdirs="$noconfigdirs gas"
+fi
+
+# some tools are so dependent upon X11 that if we're not building with X, 
+# it's not even worth trying to configure, much less build, that tool.
+
+case ${with_x} in
+  yes | "") ;; # the default value for this tree is that X11 is available
+  no)
+    skipdirs="${skipdirs} tk tix itcl libgui"
+    # We won't be able to build gdbtk without X.
+    enable_gdbtk=no 
+    ;;
+  *)  echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
+esac
+
+# Some tools are only suitable for building in a "native" situation.
+# Remove these if host!=target.  
+native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
+
+# Similarly, some are only suitable for cross toolchains.
+# Remove these if host=target.
+cross_only="target-libgloss target-newlib target-opcodes"
+
+case $is_cross_compiler in
+  no) skipdirs="${skipdirs} ${cross_only}" ;;
+  yes) skipdirs="${skipdirs} ${native_only}" ;;
+esac
+
+# If both --with-headers and --with-libs are specified, default to
+# --without-newlib.
+if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
+  if test x"${with_newlib}" = x ; then
+    with_newlib=no
+  fi
+fi
+
+# Recognize --with-newlib/--without-newlib.
+case ${with_newlib} in
+  no) skipdirs="${skipdirs} target-newlib" ;;
+  yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
+esac
+
+# Configure extra directories which are host specific
+
+case "${host}" in
+  *-cygwin*)
+    configdirs="$configdirs libtermcap" ;;
+esac
+
+# Remove more programs from consideration, based on the host or 
+# target this usually means that a port of the program doesn't
+# exist yet.
+
+case "${host}" in
+  hppa*64*-*-*)
+    noconfigdirs="$noconfigdirs byacc"
+    ;;
+  i[3456]86-*-vsta)
+    noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
+    ;;
+  i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
+    noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
+    ;;
+  i[3456]86-*-mingw32*)
+    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
+    noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
+    ;;
+  i[3456]86-*-beos*)
+    noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
+    ;;
+  *-*-cygwin*)
+    noconfigdirs="autoconf automake send-pr rcs guile perl"
+    ;;
+  *-*-netbsd*)
+    noconfigdirs="rcs"
+    ;;
+  ppc*-*-pe)
+    noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
+    ;;
+  powerpc-*-beos*)
+    noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
+    ;;
+  *-*-darwin*)
+    noconfigdirs="$noconfigdirs tk itcl tix libgui"
+    ;;
+esac
+
+# Save it here so that, even in case of --enable-libgcj, if the Java
+# front-end isn't enabled, we still get libgcj disabled.
+libgcj_saved=$libgcj
+case $enable_libgcj in
+yes)
+  # If we reset it here, it won't get added to noconfigdirs in the
+  # target-specific build rules, so it will be forcibly enabled
+  # (unless the Java language itself isn't enabled).
+  libgcj=
+  ;;
+no)
+  # Make sure we get it printed in the list of not supported target libs.
+  noconfigdirs="$noconfigdirs ${libgcj}"
+  ;;
+esac
+
+case "${target}" in
+  *-*-chorusos)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    ;;
+  *-*-darwin*)
+    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+    noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
+    ;;
+  *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    ;;
+  *-*-kaos*)
+    # Remove unsupported stuff on all kaOS configurations.
+    skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-libf2c target-librx"
+    skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
+    skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
+    noconfigdirs="$noconfigdirs target-libgloss"
+    ;;
+  *-*-netbsd*)
+    # Skip some stuff on all NetBSD configurations.
+    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
+
+    # Skip some stuff that's unsupported on some NetBSD configurations.
+    case "${target}" in
+      i*86-*-netbsdelf*) ;;
+      arm*-*-netbsdelf*) ;;
+      *)
+	noconfigdirs="$noconfigdirs ${libgcj}"
+	;;
+    esac
+    ;;
+  *-*-netware)
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
+    ;;
+  *-*-rtems*)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    case ${target} in
+	h8300*-*-* | h8500-*-*)
+	  noconfigdirs="$noconfigdirs target-libf2c"
+          ;;
+        *) ;;
+    esac
+    ;;
+  *-*-vxworks*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    ;;
+  alpha*-dec-osf*)
+    # ld works, but does not support shared libraries.
+    # newlib is not 64 bit ready.  I'm not sure about fileutils.
+    # gas doesn't generate exception information.
+    noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
+    ;;
+  alpha*-*-*vms*)
+    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
+    ;;
+  alpha*-*-linux*)
+    # newlib is not 64 bit ready
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  alpha*-*-freebsd*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  alpha*-*-*)
+    # newlib is not 64 bit ready
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    ;;
+  sh-*-linux*)
+    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+    ;;    
+  sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs target-examples"
+    noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
+    noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
+    noconfigdirs="$noconfigdirs expect dejagnu"
+    # the C++ libraries don't build on top of CE's C libraries
+    noconfigdirs="$noconfigdirs target-libstdc++-v3"
+    noconfigdirs="$noconfigdirs target-newlib"
+    case "${host}" in
+      *-*-cygwin*) ;; # keep gdb and readline
+      *) noconfigdirs="$noconfigdirs gdb readline"
+	 ;;
+    esac
+    ;;
+  arc-*-*)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  arm-*-coff | strongarm-*-coff | xscale-*-coff)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
+    noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+    ;;
+  arm-*-pe*)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  arm-*-oabi*)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  thumb-*-coff)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  thumb-*-elf)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  thumb-*-oabi)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  thumb-*-pe)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  arm-*-riscix*)
+    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+    ;;
+  avr-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+    ;;
+  c4x-*-* | tic4x-*-*)
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    ;;
+  c54x*-*-* | tic54x-*-*)
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
+    ;;
+  cris-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  d10v-*-*)
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    ;;
+  d30v-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  fr30-*-elf*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  frv-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  h8300*-*-*)
+    noconfigdirs="$noconfigdirs target-libgloss"
+    ;;
+  h8500-*-*)
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
+    ;;
+  hppa*64*-*-linux* | parisc*64*-*-linux*)
+    # In this case, it's because the hppa64-linux target is for
+    # the kernel only at this point and has no libc, and thus no
+    # headers, crt*.o, etc., all of which are needed by these.
+    noconfigdirs="$noconfigdirs target-zlib"
+    ;;
+  hppa*-*-*elf* | \
+  parisc*-*-linux* | hppa*-*-linux* | \
+  hppa*-*-lites* | \
+  hppa*-*-openbsd* | \
+  hppa*64*-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    # Do configure ld/binutils/gas for this case.
+    ;;
+  hppa*-*-*)
+    # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+    # build on HP-UX 10.20.
+    noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
+    ;;
+  ia64*-*-elf*)
+    # No gdb support yet.
+    noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
+    ;;
+  ia64*-**-hpux*)
+    # No gdb or ld support yet.
+    noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
+    ;;
+  i[3456]86-*-coff | i[3456]86-*-elf)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  i[34567]86-*-freebsd*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  i[3456]86-*-linux*)
+    # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
+    # not build java stuff by default.
+    case "${target}" in
+      *-*-*libc1*)
+	noconfigdirs="$noconfigdirs ${libgcj}";;
+    esac
+
+    # This section makes it possible to build newlib natively on linux.
+    # If we are using a cross compiler then don't configure newlib.
+    if test x${is_cross_compiler} != xno ; then
+      noconfigdirs="$noconfigdirs target-newlib"
+    fi
+    noconfigdirs="$noconfigdirs target-libgloss"
+    # If we are not using a cross compiler, do configure newlib.
+    # Note however, that newlib will only be configured in this situation
+    # if the --with-newlib option has been given, because otherwise
+    # 'target-newlib' will appear in skipdirs.
+    ;;
+  i[3456]86-*-mingw32*)
+    target_configdirs="$target_configdirs target-mingw"
+    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
+
+    # Can't build gdb for mingw32 if not native.
+    case "${host}" in
+      i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
+      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
+         ;;
+    esac
+    ;;    
+  *-*-cygwin*)
+    target_configdirs="$target_configdirs target-libtermcap target-winsup"
+    noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
+    # always build newlib.
+    skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+
+    # Can't build gdb for Cygwin if not native.
+    case "${host}" in
+      *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
+      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
+         ;;
+    esac
+    ;;    
+  i[3456]86-*-pe)
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    ;;
+  i[3456]86-*-sco3.2v5*)
+    # The linker does not yet know about weak symbols in COFF,
+    # and is not configured to handle mixed ELF and COFF.
+    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+    ;;
+  i[3456]86-*-sco*)
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    ;;
+  i[3456]86-*-solaris2*)
+    noconfigdirs="$noconfigdirs target-libgloss"
+    ;;
+  i[3456]86-*-sysv4*)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  i[3456]86-*-beos*)
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+    ;;
+  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+    ;;
+  m68k-*-elf*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  m68k-*-coff*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  mcore-*-pe*)
+  # The EPOC C++ environment does not support exceptions or rtti,
+  # and so building libstdc++-v3 tends not to always work.
+    noconfigdirs="$noconfigdirs target-libstdc++-v3"
+    ;;
+  mmix-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
+    ;;
+  mn10200-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  mn10300-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  powerpc-*-aix*)
+    # copied from rs6000-*-* entry
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    ;;
+  powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+    target_configdirs="$target_configdirs target-winsup"
+    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
+    # always build newlib.
+    skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+    ;;
+    # This is temporary until we can link against shared libraries
+  powerpcle-*-solaris*)
+    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
+    ;;
+  powerpc-*-beos*)
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+    ;;
+  powerpc-*-eabi)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  rs6000-*-lynxos*)
+    noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
+    ;;
+  rs6000-*-aix*)
+    noconfigdirs="$noconfigdirs gprof ${libgcj}"
+    ;;
+  rs6000-*-*)
+    noconfigdirs="$noconfigdirs gprof ${libgcj}"
+    ;;
+  m68k-apollo-*)
+    noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
+    ;;
+  mips*-*-irix5*)
+    # The GNU linker does not support shared libraries.
+    noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
+    ;;
+  mips*-*-irix6*)
+    # Linking libjava exceeds command-line length limits on at least
+    # IRIX 6.2, but not on IRIX 6.5.
+    # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
+    # <oldham@codesourcery.com>
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    ;;
+  mips*-dec-bsd*)
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    ;;
+  mips*-*-bsd*)
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    ;;
+  mipstx39-*-*)
+    noconfigdirs="$noconfigdirs gprof ${libgcj}"   # same as generic mips
+    ;;
+  mips*-*-linux*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  mips*-*-*)
+    noconfigdirs="$noconfigdirs gprof ${libgcj}"
+    ;;
+  romp-*-*)
+    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
+    ;;
+  sh-*-*)
+    case "${host}" in
+      i[3456]86-*-vsta) ;; # don't add gprof back in
+      i[3456]86-*-go32*) ;; # don't add gprof back in
+      i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in
+      *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
+    esac
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  sh64-*-*)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  sparc-*-elf*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  sparc64-*-elf*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  sparclite-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  sparc-*-sunos4*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    if test x${is_cross_compiler} != xno ; then
+           noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+    else
+           use_gnu_ld=no
+    fi
+    ;;
+  sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
+    ;;
+  v810-*-*)
+    noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
+    ;;
+  v850-*-*)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  v850e-*-*)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  v850ea-*-*)
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    ;;
+  vax-*-vms)
+    noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
+    ;;
+  vax-*-*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    ;;
+  ip2k-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+    ;;
+  *-*-linux*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-lynxos*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    ;; 
+  *-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+esac
+
+# If we aren't building newlib, then don't build libgloss, since libgloss
+# depends upon some newlib header files.
+case "${noconfigdirs}" in
+  *target-libgloss*) ;;
+  *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
+esac
+
+# Figure out what language subdirectories are present.
+# Look if the user specified --enable-languages="..."; if not, use
+# the environment variable $LANGUAGES if defined. $LANGUAGES might
+# go away some day.
+# NB:  embedded tabs in this IF block -- do not untabify
+if test x"${enable_languages+set}" != xset; then
+  if test x"${LANGUAGES+set}" = xset; then
+    enable_languages="${LANGUAGES}"
+      echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+  else
+    enable_languages=all
+  fi
+else
+  if test x"${enable_languages}" = x ||
+     test x"${enable_languages}" = xyes;
+     then
+    echo configure.in: --enable-languages needs at least one language argument 1>&2
+    exit 1
+  fi
+fi
+enable_languages=`echo "${enable_languages}" | sed -e 's/[ 	,][ 	,]*/,/g' -e 's/,$//'`
+
+# First scan to see if an enabled language requires some other language.
+# We assume that a given config-lang.in will list all the language
+# front ends it requires, even if some are required indirectly.
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+  case $lang in
+    ..) ;;
+    # The odd quoting in the next line works around
+    # an apparent bug in bash 1.12 on linux.
+    ${srcdir}/gcc/[*]/config-lang.in) ;;
+    *)
+      lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ 	]*\).*$,\1,p' $lang`
+      this_lang_requires=`sed -n -e 's,^lang_requires=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_requires=\([^ 	]*\).*$,\1,p' $lang`
+      for other in $this_lang_requires
+      do
+        case ,${enable_languages}, in
+	  *,$other,*) ;;
+	  *,all,*) ;;
+	  *,$lang_alias,*)
+	    echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
+	    enable_languages="$enable_languages,$other"
 	    ;;
 	esac
-	withoptions="--with-gcc-version-trigger=$gcc_version_trigger $withoptions"
-    fi
-fi
-
-### break up ${srcdir}/configure.in.
-case "`grep '^# per\-host:' ${srcdir}/configure.in`" in
-"")
-        echo '***' ${srcdir}/configure.in has no \"per-host:\" line. 1>&2
-	# Check for a directory that's been converted to use autoconf since
-	# it was last configured.
-	if grep AC_OUTPUT ${srcdir}/configure.in >/dev/null ; then
-	  echo '***' Hmm, looks like this directory has been autoconfiscated. 1>&2
-	  if [ -r ${srcdir}/configure ] ; then
-	    echo '***' Running the local configure script. 1>&2
-	    case "${cache_file}" in
-	    "") cache_file_option= ;;
-	    *)  cache_file_option="--cache-file=${cache_file}" ;;
-	    esac
-	    srcdiroption="--srcdir=${srcdir}"
-	    case "${build_alias}" in
-	    "") buildopt= ;;
-	    *)  buildopt="--build=${build_alias}" ;;
-	    esac
-	    eval exec ${config_shell} ${srcdir}/configure ${verbose} \
-		${buildopt} --host=${host_alias} --target=${target_alias} \
-		${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
-		${srcdiroption} ${diroptions} \
-		${program_prefixoption} ${program_suffixoption} \
-		${program_transform_nameoption} ${site_option} \
-		${withoptions} ${withoutoptions} \
-		${enableoptions} ${disableoptions} ${floating_pointoption} \
-		${cache_file_option} ${removing} ${other_options} ${redirect}
-	  else
-	    echo '***' There is no configure script present though. 1>&2
-	  fi
+      done
+      ;;
+  esac
+done
+
+subdirs=
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+  case $lang in
+    ..) ;;
+    # The odd quoting in the next line works around
+    # an apparent bug in bash 1.12 on linux.
+    ${srcdir}/gcc/[*]/config-lang.in) ;;
+    *)
+      lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ 	]*\).*$,\1,p' $lang`
+      this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ 	]*\).*$,\1,p' $lang`
+      this_lang_dirs=`sed -n -e 's,^lang_dirs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_dirs=\([^ 	]*\).*$,\1,p' $lang`
+      build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ 	]*\).*$,\1,p' $lang`
+      if test "x$lang_alias" = x
+         then
+        echo "$lang doesn't set \$language." 1>&2
+        exit 1
+      fi
+      case ${build_by_default},${enable_languages}, in
+        *,$lang_alias,*) add_this_lang=yes ;;
+        no,*) add_this_lang=no ;;
+        *,all,*) add_this_lang=yes ;;
+        *) add_this_lang=no ;;
+      esac
+      if test x"${add_this_lang}" = xyes; then
+        eval target_libs='"$target_libs "'\"$this_lang_libs\"
+      else
+        eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
+      fi
+      ;;
+  esac
+done
+
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
+# $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
+notsupp=""
+for dir in . $skipdirs $noconfigdirs ; do
+  dirname=`echo $dir | sed -e s/target-//g`
+  if test $dir != .  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+    configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+    if test -r $srcdir/$dirname/configure ; then
+      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	true
+      else
+	notsupp="$notsupp $dir"
+      fi
+    fi
+  fi
+  if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+    target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+    if test -r $srcdir/$dirname/configure ; then
+      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	true
+      else
+	notsupp="$notsupp $dir"
+      fi
+    fi
+  fi
+done
+
+# Sometimes the tools are distributed with libiberty but with no other
+# libraries.  In that case, we don't want to build target-libiberty.
+if test -n "${target_configdirs}" ; then
+  others=
+  for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+    if test "$i" != "libiberty" ; then
+      if test -r $srcdir/$i/configure ; then
+	others=yes;
+	break;
+      fi
+    fi
+  done
+  if test -z "${others}" ; then
+    target_configdirs=
+  fi
+fi
+
+# Quietly strip out all directories which aren't configurable in this tree.
+# This relies on all configurable subdirectories being autoconfiscated, which
+# is now the case.
+configdirs_all="$configdirs"
+configdirs=
+for i in ${configdirs_all} ; do
+  if test -f ${srcdir}/$i/configure ; then
+    configdirs="${configdirs} $i"
+  fi
+done
+target_configdirs_all="$target_configdirs"
+target_configdirs=
+for i in ${target_configdirs_all} ; do
+  j=`echo $i | sed -e s/target-//g` 
+  if test -f ${srcdir}/$j/configure ; then
+    target_configdirs="${target_configdirs} $i"
+  fi
+done
+
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
+
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
+  # If $appdirs is non-empty, at least one of those directories must still
+  # be configured, or we error out.  (E.g., if the gas release supports a
+  # specified target in some subdirs but not the gas subdir, we shouldn't
+  # pretend that all is well.)
+  if test -n "$appdirs" ; then
+    for dir in $appdirs ; do
+      if test -r $dir/Makefile.in ; then
+	if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	  appdirs=""
+	  break
 	fi
-        exit 1
-        ;;
-*) ;;
+	if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	  appdirs=""
+	  break
+	fi
+      fi
+    done
+    if test -n "$appdirs" ; then
+      echo "*** This configuration is not supported by this package." 1>&2
+      exit 1
+    fi
+  fi
+  # Okay, some application will build, or we don't care to check.  Still
+  # notify of subdirs not getting built.
+  echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+  echo "    ${notsupp}" 1>&2
+  echo "    (Any other directories should still work fine.)" 1>&2
+fi
+
+case "$host" in
+  *msdosdjgpp*)
+    enable_gdbtk=no ;;
 esac
 
-case "`grep '^# per\-target:' ${srcdir}/configure.in`" in
-"")
-        echo '***' ${srcdir}/configure.in has no \"per-target:\" line. 1>&2
-        exit 1
-        ;;
-*) ;;
+copy_dirs=
+
+# Handle --with-headers=XXX.  If the value is not "yes", the contents of
+# the named directory are copied to $(tooldir)/sys-include.
+if test x"${with_headers}" != x ; then
+  if test x${is_cross_compiler} = xno ; then
+    echo 1>&2 '***' --with-headers is only supported when cross compiling
+    exit 1
+  fi
+  if test x"${with_headers}" != xyes ; then
+    case "${exec_prefixoption}" in
+    "") x=${prefix} ;;
+    *) x=${exec_prefix} ;;
+    esac
+    copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
+  fi
+fi
+
+# Handle --with-libs=XXX.  If the value is not "yes", the contents of
+# the name directories are copied to $(tooldir)/lib.  Multiple directories
+# are permitted.
+if test x"${with_libs}" != x ; then
+  if test x${is_cross_compiler} = xno ; then
+    echo 1>&2 '***' --with-libs is only supported when cross compiling
+    exit 1
+  fi
+  if test x"${with_libs}" != xyes ; then
+    # Copy the libraries in reverse order, so that files in the first named
+    # library override files in subsequent libraries.
+    case "${exec_prefixoption}" in
+    "") x=${prefix} ;;
+    *) x=${exec_prefix} ;;
+    esac
+    for l in ${with_libs}; do
+      copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
+    done
+  fi
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while test $# != 0 ; do
+  if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
+    :
+  else
+    echo Copying $1 to $2
+
+    # Use the install script to create the directory and all required
+    # parent directories.
+    if test -d $2 ; then
+      :
+    else
+      echo >config.temp
+      ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
+    fi
+
+    # Copy the directory, assuming we have tar.
+    # FIXME: Should we use B in the second tar?  Not all systems support it.
+    (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+
+    # It is the responsibility of the user to correctly adjust all
+    # symlinks.  If somebody can figure out how to handle them correctly
+    # here, feel free to add the code.
+
+    echo $1 > $2/COPIED
+  fi
+  shift; shift
+done
+
+# Work in distributions that contain no compiler tools, like Autoconf.
+tentative_cc=""
+host_makefile_frag=/dev/null
+if test -d ${srcdir}/config ; then
+case "${host}" in
+  m68k-hp-hpux*)
+    # Avoid "too much defining" errors from HPUX compiler.
+    tentative_cc="cc -Wp,-H256000"
+    # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
+    # If it's HP/UX ar, this should be harmless.
+    RANLIB="ar ts"
+    ;;
+  m68k-apollo-sysv*)
+    tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
+    ;;
+  m68k-apollo-bsd*)
+    #None of the Apollo compilers can compile gas or binutils.  The preprocessor
+    # chokes on bfd, the compiler won't let you assign integers to enums, and
+    # other problems.  Defining CC to gcc is a questionable way to say "don't use
+    # the apollo compiler" (the preferred version of GCC could be called cc,
+    # or whatever), but I'm not sure leaving CC as cc is any better...
+    #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
+    # Used to have BISON=yacc.
+    tentative_cc=gcc
+    ;;
+  m88k-dg-dgux*)
+    tentative_cc="gcc -Wall -ansi -D__using_DGUX"
+    ;;
+  m88k-harris-cxux*)
+    # Under CX/UX, we want to tell the compiler to use ANSI mode.
+    tentative_cc="cc -Xa"
+    host_makefile_frag="config/mh-cxux"
+    ;;
+  m88k-motorola-sysv*)
+    ;;
+  mips*-dec-ultrix*)
+    tentative_cc="cc -Wf,-XNg1000"
+    host_makefile_frag="config/mh-decstation"
+    ;;
+  mips*-nec-sysv4*)
+    # The C compiler on NEC MIPS SVR4 needs bigger tables.
+    tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
+    host_makefile_frag="config/mh-necv4"
+    ;;
+  mips*-sgi-irix4*)
+    # Tell compiler to use K&R C.  We can't compile under the SGI Ansi
+    # environment.  Also bump switch table size so that cp-parse will
+    # compile.  Bump string length limit so linker builds.
+    tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
+    ;;
+  mips*-*-sysv4*)
+    host_makefile_frag="config/mh-sysv4"
+    ;;
+  mips*-*-sysv*)
+    # This is for a MIPS running RISC/os 4.52C.
+
+    # This is needed for GDB, but needs to be in the top-level make because
+    # if a library is compiled with the bsd headers and gets linked with the
+    # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
+    # a different size).
+    # ptrace(2) apparently has problems in the BSD environment.  No workaround is
+    # known except to select the sysv environment.  Could we use /proc instead?
+    # These "sysv environments" and "bsd environments" often end up being a pain.
+    #
+    # This is not part of CFLAGS because perhaps not all C compilers have this
+    # option.
+    tentative_cc="cc -systype sysv"
+    ;;
+  i370-ibm-opened*)
+    tentative_cc="c89"
+    ;;
+  i[3456]86-*-sysv5*)
+    host_makefile_frag="config/mh-sysv5"
+    ;;
+  i[3456]86-*-dgux*)
+    tentative_cc="gcc -Wall -ansi -D__using_DGUX"
+    host_makefile_frag="config/mh-dgux386"
+    ;;
+  i[3456]86-ncr-sysv4.3*)
+    # The MetaWare compiler will generate a copyright message unless you
+    # turn it off by adding the -Hnocopyr flag.
+    tentative_cc="cc -Hnocopyr"
+    ;;
+  i[3456]86-ncr-sysv4*)
+    # for an NCR 3000 (i486/SVR4) system.
+    # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
+    # This compiler not only emits obnoxious copyright messages every time
+    # you run it, but it chokes and dies on a whole bunch of GNU source
+    # files.  Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
+    tentative_cc="/usr/ccs/ATT/cc"
+    host_makefile_frag="config/mh-ncr3000"
+    ;;
+  i[3456]86-*-sco3.2v5*)
+    ;;
+  i[3456]86-*-sco*)
+    # The native C compiler botches some simple uses of const.  Unfortunately,
+    # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
+    tentative_cc="cc -Dconst="
+    host_makefile_frag="config/mh-sco"
+    ;;
+  i[3456]86-*-udk*)
+    host_makefile_frag="config/mh-sysv5"
+    ;;
+  i[3456]86-*-solaris2*)
+    host_makefile_frag="config/mh-sysv4"
+    ;;
+  i[3456]86-*-msdosdjgpp*)
+    host_makefile_frag="config/mh-djgpp"
+    ;;
+  *-cygwin*)
+    host_makefile_frag="config/mh-cygwin"
+    ;;
+  *-mingw32*)
+    host_makefile_frag="config/mh-mingw32"
+    ;;
+  *-interix*)
+    host_makefile_frag="config/mh-interix"
+    ;;
+  vax-*-ultrix2*)
+    # The old BSD pcc isn't up to compiling parts of gdb so use gcc
+    tentative_cc=gcc
+    ;;
+  *-*-solaris2*)
+    host_makefile_frag="config/mh-solaris"
+    ;;
+  m68k-sun-sunos*)
+    # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
+    # without overflowing the jump tables (-J says to use a 32 bit table)
+    tentative_cc="cc -J"
+    ;;
+  *-hp-hpux*)
+    tentative_cc="cc -Wp,-H256000"
+    ;;
+  *-*-hiux*)
+    tentative_cc="cc -Wp,-H256000"
+    ;;
+  rs6000-*-lynxos*)
+    # /bin/cc is less than useful for our purposes.  Always use GCC
+    tentative_cc="/usr/cygnus/progressive/bin/gcc"
+    host_makefile_frag="config/mh-lynxrs6k"
+    ;;
+  *-*-lynxos*)
+    # /bin/cc is less than useful for our purposes.  Always use GCC
+    tentative_cc="/bin/gcc"
+    ;;
+  *-*-sysv4*)
+    host_makefile_frag="config/mh-sysv4"
+    ;;
 esac
-
-case "${TMPDIR}" in
-"") TMPDIR=/tmp ; export TMPDIR ;;
-*) ;;
+fi
+
+extra_arflags_for_target=
+extra_nmflags_for_target=
+extra_ranlibflags_for_target=
+target_makefile_frag=/dev/null
+case "${target}" in
+  i[3456]86-*-netware*)
+    target_makefile_frag="config/mt-netware"
+    ;;
+  powerpc-*-netware*)
+    target_makefile_frag="config/mt-netware"
+    ;;
+  *-*-linux*)
+    target_makefile_frag="config/mt-linux"
+    ;;
+  *-*-aix4.[3456789]* | *-*-aix[56789].*)
+    # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm 
+    # commands to handle both 32-bit and 64-bit objects.  These flags are
+    # harmless if we're using GNU nm or ar.
+    extra_arflags_for_target=" -X32_64"
+    extra_nmflags_for_target=" -B -X32_64"
+    ;;
+  *-*-darwin*)
+    # ranlib from Darwin requires the -c flag to look at common symbols.
+    extra_ranlibflags_for_target=" -c"
+    ;;
+  mips*-*-pe | sh*-*-pe | *arm-wince-pe)
+    target_makefile_frag="config/mt-wince"
+    ;;
 esac
 
-# keep this filename short for &%*%$*# 14 char file names and 8+3 file names
-tmpfile=${TMPDIR}/cNf$$
-# Note that under many versions of sh a trap handler for 0 will *override* any
-# exit status you explicitly specify!  At this point, the only non-error exit
-# is at the end of the script; these actions are duplicated there, minus
-# the "exit 1".  Don't use "exit 0" anywhere after this without resetting the
-# trap handler, or you'll lose.
-trap "rm -f Makefile.tem ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos; exit 1" 0 1 2 15
-
-# split ${srcdir}/configure.in into common, per-host, per-target,
-# and post-target parts.  Post-target is optional.
-sed -e '/^# per\-host:/,$d' ${srcdir}/configure.in > ${tmpfile}.com
-sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.hst
-if grep '^# post-target:' ${srcdir}/configure.in >/dev/null ; then
-  sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.tgt
-  sed -e '1,/^# post\-target:/d' ${srcdir}/configure.in > ${tmpfile}.pos
-else
-  sed -e '1,/^# per\-target:/d' ${srcdir}/configure.in > ${tmpfile}.tgt
-  echo >${tmpfile}.pos
-fi
-
-### do common part of configure.in
-
-# If the language specific compiler does not exist, but the "gcc" directory does,
-# we will skip this directory; in this case the sub-directory's common part
-# of configure.in will create a small shell script "skip-this-dir" containing
-# commands to completely clean up any temporary or created files.
-
-. ${tmpfile}.com
-
-if test -f skip-this-dir; then
-	# Perform the same cleanup as the trap handler, minus the "exit 1" of course,
-	# and reset the trap handler.
-	trap 0
-	rm -f Makefile* ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos
-	# Execute the final clean-up actions
-	${config_shell} skip-this-dir
-	# and stop configuring this directory.
-	exit 0
-fi
-
-# some sanity checks on configure.in
-case "${srctrigger}" in
-"")
-        echo '***' srctrigger not set in ${PWD=`pwd`}/configure.in.  1>&2
-        exit 1
-        ;;
-*) ;;
+alphaieee_frag=/dev/null
+case $target in
+  alpha*-*-*)
+    # This just makes sure to use the -mieee option to build target libs.
+    # This should probably be set individually by each library.
+    alphaieee_frag="config/mt-alphaieee"
+    ;;
 esac
 
-case "${build_alias}" in
-"")
-	if result=`${config_shell} ${configsub} ${host_alias}` ; then
-	    build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-	    build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-	    build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-	    build=${build_cpu}-${build_vendor}-${build_os}
-	    build_alias=${host_alias}
-	fi
-	;;
-*)
-	if result=`${config_shell} ${configsub} ${build_alias}` ; then
-	    buildopt="--build=${build_alias}"
-	    build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-	    build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-	    build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-	    build=${build_cpu}-${build_vendor}-${build_os}
-	else
-	    echo "Unrecognized build system name ${build_alias}." 1>&2
-	    exit 1
-	fi
-	;;
+# If --enable-target-optspace always use -Os instead of -O2 to build
+# the target libraries, similarly if it is not specified, use -Os
+# on selected platforms.
+ospace_frag=/dev/null
+case "${enable_target_optspace}:${target}" in
+  yes:*)
+    ospace_frag="config/mt-ospace"
+    ;;
+  :d30v-*)
+    ospace_frag="config/mt-d30v"
+    ;;
+  :m32r-* | :d10v-* | :fr30-*)
+    ospace_frag="config/mt-ospace"
+    ;;
+  no:* | :*)
+    ;;
+  *)
+    echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
+    ;;
 esac
 
-if result=`${config_shell} ${configsub} ${host_alias}` ; then
-    true
-else
-    echo "Unrecognized host system name ${host_alias}." 1>&2
-    exit 1
-fi
-host_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-host=${host_cpu}-${host_vendor}-${host_os}
-
-. ${tmpfile}.hst
-
-if result=`${config_shell} ${configsub} ${target_alias}` ; then
-    true
-else
-    echo "Unrecognized target system name ${target_alias}." 1>&2
-    exit 1
-fi
-target_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-target=${target_cpu}-${target_vendor}-${target_os}
-
-. ${tmpfile}.tgt
-
-# Find the source files, if location was not specified.
-case "${srcdir}" in
-"")
-        srcdirdefaulted=1
-        srcdir=.
-        if [ ! -r ${srctrigger} ] ; then
-                srcdir=..
-        fi
-        ;;
-*) ;;
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+# 
+# The command line options always override the explicit settings in 
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't 
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if test x${use_gnu_as} = x &&
+   echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+  with_gnu_as=yes
+  extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+   echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+  with_gnu_ld=yes
+  extra_host_args="$extra_host_args --with-gnu-ld"
+fi
+
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+  with_newlib=yes
+  extra_host_args="$extra_host_args --with-newlib"
+fi
+
+
+# Default to using --with-stabs for certain targets.
+if test x${with_stabs} = x ; then
+  case "${target}" in
+  mips*-*-irix6*o32)
+    with_stabs=yes;
+    extra_host_args="${extra_host_args} --with-stabs"
+    ;;
+  mips*-*-irix6*)
+    ;;
+  mips*-*-* | alpha*-*-osf*)
+    with_stabs=yes;
+    extra_host_args="${extra_host_args} --with-stabs"
+    ;;
+  esac
+fi
+
+# hpux11 in 64bit mode has libraries in a weird place.  Arrange to find
+# them automatically.
+case "${host}" in
+  hppa*64*-*-hpux11*)	
+    extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
+    ;;
 esac
 
-if [ ! -r ${srcdir}/${srctrigger} ] ; then
-        case "${srcdirdefaulted}" in
-        "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/${srcdir}" 1>&2 ;;
-        *)  echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/. or ${PWD=`pwd`}/.." 1>&2 ;;
-        esac
-
-        echo '***' \(At least ${srctrigger} is missing.\) 1>&2
-        exit 1
+# If we aren't going to be using gcc, see if we can extract a definition
+# of CC from the fragment.
+# Actually, use the 'pre-extracted' version above.
+if test -z "${CC}" && test "${build}" = "${host}" ; then
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
+  found=
+  for dir in $PATH; do
+    test -z "$dir" && dir=.
+    if test -f $dir/gcc; then
+      found=yes
+      break
+    fi
+  done
+  IFS="$save_ifs"
+  if test -z "${found}" && test -n "${tentative_cc}" ; then
+    CC=$tentative_cc
+  fi
 fi
 
@@ -781,68 +1928,5 @@
 # using) don't handle "\$" correctly, so don't use it here.
 tooldir='$(exec_prefix)'/${target_alias}
-
-if [ "${host_alias}" != "${target_alias}" ] ; then
-    if [ "${program_prefixoption}" = "" ] ; then
-        if [ "${program_suffixoption}" = "" ] ; then 
-            if [ "${program_transform_nameoption}" = "" ] ; then
-                program_prefix=${target_alias}- ;
-            fi
-        fi
-    fi
-fi
-
-# Merge program_prefix and program_suffix onto program_transform_name.
-# (program_suffix used to use $, but it's hard to preserve $ through both
-# make and sh.)
-if [ "${program_suffix}" != "" ] ; then
-    program_transform_name="-e s,\\\\(.*\\\\),\\\\1${program_suffix}, ${program_transform_name}"
-fi
-
-if [ "${program_prefix}" != "" ] ; then
-    program_transform_name="-e s,^,${program_prefix}, ${program_transform_name}"
-fi
-
-# If CC and CXX are not set in the environment, and the Makefile
-# exists, try to extract them from it.  This is to handle running
-# ./config.status by hand.
-if [ -z "${CC}" ] && [ -r Makefile ]; then
-  sed -n -e ':loop
-/\\$/ N
-s/\\\n//g
-t loop
-/^CC[ 	]*=/ s/CC[ 	]*=[ 	]*\(.*\)/\1/p' < Makefile > Makefile.cc
-  CC=`tail -1 Makefile.cc`
-  rm -f Makefile.cc
-fi
-
-if [ -z "${CFLAGS}" ] && [ -r Makefile ]; then
-  sed -n -e ':loop
-/\\$/ N
-s/\\\n//g
-t loop
-/^CFLAGS[ 	]*=/ s/CFLAGS[ 	]*=[ 	]*\(.*\)/\1/p' < Makefile > Makefile.cc
-  CFLAGS=`tail -1 Makefile.cc`
-  rm -f Makefile.cc
-fi
-
-if [ -z "${CXX}" ] && [ -r Makefile ]; then
-  sed -n -e ':loop
-/\\$/ N
-s/\\\n//g
-t loop
-/^CXX[ 	]*=/ s/CXX[ 	]*=[ 	]*\(.*\)/\1/p' < Makefile > Makefile.cc
-  CXX=`tail -1 Makefile.cc`
-  rm -f Makefile.cc
-fi
-
-if [ -z "${CXXFLAGS}" ] && [ -r Makefile ]; then
-  sed -n -e ':loop
-/\\$/ N
-s/\\\n//g
-t loop
-/^CXXFLAGS[ 	]*=/ s/CXXFLAGS[ 	]*=[ 	]*\(.*\)/\1/p' < Makefile > Makefile.cc
-  CXXFLAGS=`tail -1 Makefile.cc`
-  rm -f Makefile.cc
-fi
+build_tooldir=${tooldir}
 
 # Generate a default definition for YACC.  This is used if the makefile can't
@@ -903,36 +1987,8 @@
 done
 
-if [ "${build}" != "${host}" ]; then
+if test "${build}" != "${host}" ; then
   # If we are doing a Canadian Cross, in which the host and build systems
   # are not the same, we set reasonable default values for the tools.
 
-  tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
-  tools="${tools} CC_FOR_TARGET CXX_FOR_TARGET"
-  tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET HOST_PREFIX"
-  tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
-  tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET"
-  tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
-  tools="${tools} OBJCOPY OBJDUMP"
-
-  for var in ${tools}; do
-    if eval [ -z \"\$${var}\" ] && [ -r Makefile ]; then
-      sed -n -e ':loop
-/\\$/ N
-s/\\\n//g
-t loop
-/^'"${var}"'[ 	]*=/ s/'"${var}"'[ 	]*=[ 	]*\(.*\)/\1/p' \
-	< Makefile > Makefile.v
-      t=`tail -1 Makefile.v`
-      if [ -n "${t}" ]; then
-	eval "${var}=\${t}"
-      fi
-      rm -f Makefile.v
-    fi
-  done
-
-  AR=${AR-${host_alias}-ar}
-  AR_FOR_TARGET=${AR_FOR_TARGET-${target_alias}-ar}
-  AS=${AS-${host_alias}-as}
-  AS_FOR_TARGET=${AS_FOR_TARGET-${target_alias}-as}
   BISON=${BISON-bison}
   CC=${CC-${host_alias}-gcc}
@@ -943,22 +1999,11 @@
   CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
   CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
-  DLLTOOL=${DLLTOOL-${host_alias}-dlltool}
-  DLLTOOL_FOR_TARGET=${DLLTOOL_FOR_TARGET-${target_alias}-dlltool}
+  GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
   GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
-  HOST_PREFIX=${build_alias}-
-  HOST_PREFIX_1=${build_alias}-
-  LD=${LD-${host_alias}-ld}
-  LD_FOR_TARGET=${LD_FOR_TARGET-${target_alias}-ld}
+  BUILD_PREFIX=${build_alias}-
+  BUILD_PREFIX_1=${build_alias}-
   MAKEINFO=${MAKEINFO-makeinfo}
-  NM=${NM-${host_alias}-nm}
-  NM_FOR_TARGET=${NM_FOR_TARGET-${target_alias}-nm}
-  RANLIB=${RANLIB-${host_alias}-ranlib}
-  RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib}
-  WINDRES=${WINDRES-${host_alias}-windres}
-  WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres}
-  OBJCOPY=${OBJCOPY-${host_alias}-objcopy}
-  OBJDUMP=${OBJDUMP-${host_alias}-objdump}
-
-  if [ -z "${YACC}" ]; then
+
+  if test -z "${YACC}" ; then
     IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
     for dir in $PATH; do
@@ -978,10 +2023,10 @@
     done
     IFS="$save_ifs"
-    if [ -z "${YACC}" ]; then
+    if test -z "${YACC}" ; then
       YACC="bison -y"
     fi
   fi
 
-  if [ -z "${LEX}" ]; then
+  if test -z "${LEX}" ; then
     IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
     for dir in $PATH; do
@@ -1000,18 +2045,25 @@
   fi
 
-  # Export variables which autoconf might try to set.
-  export AS
-  export AR
-  export CC_FOR_BUILD
-  export DLLTOOL
-  export LD
-  export NM
-  export RANLIB
-  export WINDRES
-  export OBJCOPY
-  export OBJDUMP
-else
+else
+  # Set reasonable default values for some tools even if not Canadian.
+  # Of course, these are different reasonable default values, originally
+  # specified directly in the Makefile.
+  # We don't export, so that autoconf can do its job.
+  # Note that all these settings are above the fragment inclusion point
+  # in Makefile.in, so can still be overridden by fragments.
+  # This is all going to change when we autoconfiscate...
+
+  BISON="\$(USUAL_BISON)"
+  CC_FOR_BUILD="\$(CC)"
+  GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
+  BUILD_PREFIX=
+  BUILD_PREFIX_1=loser-
+  MAKEINFO="\$(USUAL_MAKEINFO)"
+  LEX="\$(USUAL_LEX)"
+  YACC="\$(USUAL_YACC)"
+
   # If CC is still not set, try to get gcc.
-  if [ -z "${CC}" ]; then
+  cc_prog_is_gcc=
+  if test -z "${CC}" ; then
     IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
     for dir in $PATH; do
@@ -1019,4 +2071,5 @@
       if test -f $dir/gcc; then
 	CC="gcc"
+	cc_prog_is_gcc=yes
 	echo 'void f(){}' > conftest.c
 	if test -z "`${CC} -g -c conftest.c 2>&1`"; then
@@ -1034,9 +2087,18 @@
     CC=${CC-cc}
   else
+    # Determine if we are using gcc.
+    cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+    if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
+      cc_prog_is_gcc=yes
+    fi
+    rm -f conftest.c
     if test -z "${CFLAGS}"; then
       # Here CC is set but CFLAGS is not.  Use a quick hack to use -O2 if CC
       # is set to a version of gcc.
-      case "${CC}" in
-      *gcc)
+      if test "$cc_prog_is_gcc" = yes; then
 	echo 'void f(){}' > conftest.c
 	if test -z "`${CC} -g -c conftest.c 2>&1`"; then
@@ -1048,5 +2110,23 @@
 	fi
 	rm -f conftest*
-	;;
+      fi
+    fi
+  fi
+
+  # We must set the default linker to the linker used by gcc for the correct
+  # operation of libtool.  If LD is not defined and we are using gcc, try to
+  # set the LD default to the ld used by gcc.
+  if test -z "$LD"; then
+    if test "$cc_prog_is_gcc" = yes; then
+      case $build in
+      *-*-mingw*)
+	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
+      *)
+	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
+      esac
+      case $gcc_prog_ld in
+      # Accept absolute paths.
+      [\\/]* | [A-Za-z]:[\\/]*)
+        LD="$gcc_prog_ld" ;;
       esac
     fi
@@ -1058,562 +2138,2117 @@
 fi
 
-export CC
-export CXX
-export CFLAGS
-export CXXFLAGS
-
-# FIXME: This should be in configure.in, not configure
-case "$host" in
-	*go32*)
-	    enable_gdbtk=no ;;
-	*msdosdjgpp*)
-	    enable_gdbtk=no ;;
+# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
+# Set up the list of links to be made.
+# ${links} is the list of link names, and ${files} is the list of names to link to.
+
+# Make the links.
+configlinks="${links}"
+if test -r ./config.status  ; then
+  mv -f ./config.status ./config.back
+fi
+while test -n "${files}" ; do
+  # set file to car of files, files to cdr of files
+  set ${files}; file=$1; shift; files=$*
+  set ${links}; link=$1; shift; links=$*
+
+  if test ! -r ${srcdir}/${file} ; then
+    if test ! -r ${file} ; then
+      echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
+      echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
+      exit 1
+    else
+      srcfile=${file}
+    fi
+  else
+    srcfile=${srcdir}/${file}
+  fi
+
+  ${remove} -f ${link}
+  # Make a symlink if possible, otherwise try a hard link
+  if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
+    true
+  else
+    # We need to re-remove the file because Lynx leaves a 
+    # very strange directory there when it fails an NFS symlink.
+    ${remove} -r -f ${link}
+    ${hard_link} ${srcfile} ${link}
+  fi
+  if test ! -r ${link} ; then
+    echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
+    exit 1
+  fi
+
+  echo "Linked \"${link}\" to \"${srcfile}\"."
+done
+
+# Create a .gdbinit file which runs the one in srcdir
+# and tells GDB to look there for source files.
+
+if test -r ${srcdir}/.gdbinit ; then
+  case ${srcdir} in
+    .) ;;
+    *) cat > ./.gdbinit <<EOF
+# ${NO_EDIT}
+dir ${srcdir}
+dir .
+source ${srcdir}/.gdbinit
+EOF
+    ;;
+  esac
+fi
+
+# Make sure that the compiler is able to generate an executable.  If it
+# can't, we are probably in trouble.  We don't care whether we can run the
+# executable--we might be using a cross compiler--we only care whether it
+# can be created.  At this point the main configure script has set CC.
+we_are_ok=no
+echo "int main () { return 0; }" > conftest.c
+${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+if test $? = 0 ; then
+  if test -s conftest || test -s conftest.exe ; then
+    we_are_ok=yes
+  fi
+fi 
+case $we_are_ok in
+  no)
+    echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
+    echo 1>&2 "*** You must set the environment variable CC to a working compiler."
+    rm -f conftest*
+    exit 1
+    ;;
 esac
-
-# FIXME: This should be in configure.in, not configure
+rm -f conftest*
+
+# The Solaris /usr/ucb/cc compiler does not appear to work.
+case "${host}" in
+  sparc-sun-solaris2*)
+      CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
+      if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
+          could_use=
+          test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
+          if test -d /opt/cygnus/bin ; then
+              if test "$could_use" = "" ; then
+                  could_use="/opt/cygnus/bin"
+              else
+                  could_use="$could_use or /opt/cygnus/bin"
+              fi
+          fi
+        if test "$could_use" = "" ; then
+            echo "Warning: compilation may fail because you're using"
+            echo "/usr/ucb/cc.  You should change your PATH or CC "
+            echo "variable and rerun configure."
+        else
+            echo "Warning: compilation may fail because you're using"
+            echo "/usr/ucb/cc, when you should use the C compiler from"
+            echo "$could_use.  You should change your"
+            echo "PATH or CC variable and rerun configure."
+        fi
+      fi
+  ;;
+esac
+
+# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
+# binutils tools will find libbfd.so.
+case "${enable_shared}" in
+  no | "") SET_LIB_PATH= ;;
+  *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
+esac
+
+case "${host}" in
+  *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+  *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
+esac
+
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
+
+# This is the final value for target_configdirs.  configdirs already
+# has its final value.  It's time to create some lists of valid targets.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, such that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
+
+all_build_modules=
+configure_build_modules=
+# Only make build modules if build != host.
+# This should be done more generally, but at the moment it doesn't matter.
+if test ${host_alias} != ${build_alias} ; then
+  for module in libiberty ; do
+    all_build_modules=all-build-${module}
+    configure_build_modules=configure-build-${module}
+    if test -z "${no_recursion}" \
+       && test -f ${build_subdir}/${module}/Makefile; then
+      echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+      rm -f ${build_subdir}/${module}/Makefile
+    fi
+  done
+fi
+
+all_host_modules=
+check_host_modules=
+install_host_modules=
+configure_host_modules=
+for module in ${configdirs} ; do
+  all_host_modules="${all_host_modules} all-${module}"
+  check_host_modules="${check_host_modules} check-${module}"
+  install_host_modules="${install_host_modules} install-${module}"
+  configure_host_modules="${configure_host_modules} configure-${module}"
+  if test -z "${no_recursion}" \
+     && test -f ${module}/Makefile; then
+    echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
+    rm -f ${module}/Makefile
+  fi
+done
+install_host_modules_nogcc=`echo "${install_host_modules}" | sed -e 's/install-gcc//g'`
+
+all_target_modules=
+check_target_modules=
+install_target_modules=
+configure_target_modules=
+for module in ${target_configdirs} ; do
+  all_target_modules="${all_target_modules} all-target-${module}"
+  check_target_modules="${check_target_modules} check-target-${module}"
+  install_target_modules="${install_target_modules} install-target-${module}"
+  configure_target_modules="${configure_target_modules} configure-target-${module}"
+  if test -z "${no_recursion}" \
+     && test -f ${target_subdir}/${module}/Makefile; then
+    echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+    rm -f ${target_subdir}/${module}/Makefile
+  fi
+done
+
 # Determine whether gdb needs tk/tcl or not.
-if [ "$enable_gdbtk" != "no" ]; then
-	GDB_TK="all-tcl all-tk all-itcl all-tix all-libgui"
-else
-	GDB_TK=""
-fi
-
-for subdir in . ${subdirs} ; do
-
-    # ${subdir} is relative path from . to the directory we're currently
-    # configuring.
-    # ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed.
-    invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'`
-
-    ### figure out what to do with srcdir
-    case "${srcdir}" in
-        ".")  # no -srcdir option.  We're building in place.
-                makesrcdir=. ;;
-        /*) # absolute path
-                makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'`
-                ;;
-        *) # otherwise relative
-                case "${subdir}" in
-                .) makesrcdir=${srcdir} ;;
-                *) makesrcdir=${invsubdir}${srcdir}/${subdir} ;;
-                esac
-                ;;
-    esac
-
-    if [ "${subdir}/" != "./" ] ; then
-        Makefile=${subdir}/Makefile
-    fi
-
-    if [ ! -d ${subdir} ] ; then
-        if mkdir ${subdir} ; then
-                true
-        else
-                echo '***' "${progname}: could not make ${PWD=`pwd`}/${subdir}" 1>&2
-                exit 1
-        fi
-    fi
-
-    case "${removing}" in
-    "")
-        case "${subdir}" in
-        .) ;;
-        *) eval echo Building in ${subdir} ${redirect} ;;
-        esac
-
-        # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
-        # Set up the list of links to be made.
-        # ${links} is the list of link names, and ${files} is the list of names to link to.
-
-        # Make the links.
-        configlinks="${links}"
-        if [ -r ${subdir}/config.status ] ; then
-                mv -f ${subdir}/config.status ${subdir}/config.back
-        fi
-        while [ -n "${files}" ] ; do
-                # set file to car of files, files to cdr of files
-                set ${files}; file=$1; shift; files=$*
-                set ${links}; link=$1; shift; links=$*
-
-                if [ ! -r ${srcdir}/${file} ] ; then
-                  if [ ! -r ${file} ] ; then
-		    
-                        echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
-                        echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
-                        exit 1
-		  else
-			srcfile=${file}
-		  fi
-		else
-			srcfile=${srcdir}/${file}
-                fi
-
-                ${remove} -f ${link}
-		# Make a symlink if possible, otherwise try a hard link
-		if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
-			true
-		else
-			# We need to re-remove the file because Lynx leaves a 
-			# very strange directory there when it fails an NFS symlink.
-			${remove} -r -f ${link}
-			${hard_link} ${srcfile} ${link}
-		fi
-                if [ ! -r ${link} ] ; then
-                        echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
-                        exit 1
-                fi
-
-                echo "Linked \"${link}\" to \"${srcfile}\"."
-        done
-
-        # Create a .gdbinit file which runs the one in srcdir
-        # and tells GDB to look there for source files.
-
-        if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then
-                case ${srcdir} in
-                .) ;;
-                *) cat > ${subdir}/.gdbinit <<EOF
-# ${NO_EDIT}
-dir ${makesrcdir}
-dir .
-source ${makesrcdir}/.gdbinit
+# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
+# and in that case we want gdb to be built without tk.  Ugh!
+# In fact I believe gdb is the *only* package directly dependent on tk,
+# so we should be able to put the 'maybe's in unconditionally and
+# leave out the maybe dependencies when enable_gdbtk is false.  I'm not
+# 100% sure that that's safe though.
+
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
+case "$enable_gdbtk" in
+  no)
+    GDB_TK="" ;;
+  yes)
+    GDB_TK="${gdb_tk}" ;;
+  *)
+    # Only add the dependency on gdbtk when GDBtk is part of the gdb
+    # distro.  Eventually someone will fix this and move Insight, nee
+    # gdbtk to a separate directory.
+    if test -d ${srcdir}/gdb/gdbtk ; then
+      GDB_TK="${gdb_tk}"
+    else
+      GDB_TK=""
+    fi
+    ;;
+esac
+
+# Create the 'maybe dependencies'.  This uses a temporary file.
+rm -f maybedep.tmp
+echo '# maybedep.tmp' > maybedep.tmp
+for item in ${all_build_modules} ${all_host_modules} ${all_target_modules} \
+	${install_host_modules} ${install_target_modules} \
+	${configure_build_modules} ${configure_host_modules} ${configure_target_modules} \
+	; do
+  echo "maybe-${item}: ${item}" >> maybedep.tmp
+done
+maybe_dependencies=maybedep.tmp
+
+
+# Create the serialization dependencies.  This uses a temporary file.
+
+# Check whether --enable-serial-configure or --disable-serial-configure was given.
+if test "${enable_serial_configure+set}" = set; then
+  enableval="$enable_serial_configure"
+  :
+fi
+
+
+# These force 'configure's to be done one at a time, to avoid problems
+# with contention over a shared config.cache.
+rm -f serdep.tmp
+echo '# serdep.tmp' > serdep.tmp
+olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_build_configure}" = xno ||
+for item in ${build_configdirs} ; do
+  case ${olditem} in
+    "") ;;
+    *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
+  esac
+  olditem=${item}
+done
+olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_host_configure}" = xno ||
+for item in ${configdirs} ; do
+  case ${olditem} in
+    "") ;;
+    *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
+  esac
+  olditem=${item}
+done
+olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_target_configure}" = xno ||
+for item in ${target_configdirs} ; do
+  case ${olditem} in
+    "") ;;
+    *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
+  esac
+  olditem=${item}
+done
+serialization_dependencies=serdep.tmp
+
+
+# Base args.  Strip norecursion, cache-file, srcdir, host, build,
+# target and nonopt.  These are the ones we might not want to pass
+# down to subconfigures.
+baseargs=`echo " ${ac_configure_args} " | \
+	sed -e 's/ --no[^ ]* / /' \
+	    -e 's/ --c[a-z-]*[= ][^ ]* / /' \
+	    -e 's/ --sr[a-z-]*[= ][^ ]* / /' \
+	    -e 's/ --ho[a-z-]*[= ][^ ]* / /' \
+	    -e 's/ --bu[a-z-]*[= ][^ ]* / /' \
+	    -e 's/ --t[a-z-]*[= ][^ ]* / /' \
+	    -e 's/ -cache-file[= ][^ ]* / /' \
+	    -e 's/ -srcdir[= ][^ ]* / /' \
+	    -e 's/ -host[= ][^ ]* / /' \
+	    -e 's/ -build[= ][^ ]* / /' \
+	    -e 's/ -target[= ][^ ]* / /' \
+	    -e "s/ [^' -][^ ]* / /" \
+	    -e 's/^ *//;s/ *$//'`
+
+# For the build-side libraries, we just need to pretend we're native,
+# and not use the same cache file.  Multilibs are neither needed nor
+# desired.
+build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
+
+# For host modules, accept cache file option, or specification as blank.
+case "${cache_file}" in
+"") # empty
+  cache_file_option="" ;;
+/* | [A-Za-z]:[\\/]* ) # absolute path
+  cache_file_option="--cache-file=${cache_file}" ;;
+*) # relative path
+  cache_file_option="--cache-file=../${cache_file}" ;;
+esac
+
+host_configargs="${cache_file_option} --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
+
+target_configargs=${baseargs}
+
+# Passing a --with-cross-host argument lets the target libraries know
+# whether they are being built with a cross-compiler or being built
+# native.  However, it would be better to use other mechanisms to make the
+# sorts of decisions they want to make on this basis.  Please consider
+# this option to be deprecated.  FIXME.
+if test x${is_cross_compiler} = xyes ; then
+  target_configargs="--with-cross-host=${host_alias} ${target_configargs}"
+fi
+
+# Default to --enable-multilib.
+if test x${enable_multilib} = x ; then
+  target_configargs="--enable-multilib ${target_configargs}"
+fi
+
+# Pass --with-newlib if appropriate.  Note that target_configdirs has
+# changed from the earlier setting of with_newlib.
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
+  target_configargs="--with-newlib ${target_configargs}"
+fi
+
+# Pass the appropriate --host, --build, and --cache-file arguments.
+target_configargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
+
+# provide a proper gxx_include_dir.
+# Note, if you change the default, make sure to fix both here and in
+# the gcc and libstdc++-v3 subdirectories.
+# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
+case "${with_gxx_include_dir}" in
+  yes)
+    { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; }
+    ;;
+  no | "")
+    case "${enable_version_specific_runtime_libs}" in
+      yes) gxx_include_dir='${libsubdir}/include/c++' ;;
+      *)
+        . ${srcdir}/config.if
+        gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
+    esac ;;
+  *) gxx_include_dir=${with_gxx_include_dir} ;;
+esac
+
+FLAGS_FOR_TARGET=
+case " $target_configdirs " in
+ *" newlib "*)
+  case " $target_configargs " in
+  *" --with-newlib "*)
+   case "$target" in
+   *-cygwin*)
+     FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
+   esac
+
+   # If we're not building GCC, don't discard standard headers.
+   if test -d ${srcdir}/gcc; then
+     FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+
+     if test "${build}" != "${host}"; then
+       # On Canadian crosses, CC_FOR_TARGET will have already been set
+       # by `configure', so we won't have an opportunity to add -Bgcc/
+       # to it.  This is right: we don't want to search that directory
+       # for binaries, but we want the header files in there, so add
+       # them explicitly.
+       FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+
+       # Someone might think of using the pre-installed headers on
+       # Canadian crosses, in case the installed compiler is not fully
+       # compatible with the compiler being built.  In this case, it
+       # would be better to flag an error than risking having
+       # incompatible object files being constructed.  We can't
+       # guarantee that an error will be flagged, but let's hope the
+       # compiler will do it, when presented with incompatible header
+       # files.
+     fi
+   fi
+
+   case "${target}-${is_cross_compiler}" in
+   i[3456]86-*-linux*-no)
+      # Here host == target, so we don't need to build gcc,
+      # so we don't want to discard standard headers.
+      FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
+      ;;
+   *)
+      # If we're building newlib, use its generic headers last, but search
+      # for any libc-related directories first (so make it the last -B
+      # switch).
+      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+      ;;
+   esac
+   ;;
+  esac
+  ;;
+esac
+
+# On Canadian crosses, we'll be searching the right directories for
+# the previously-installed cross compiler, so don't bother to add
+# flags for directories within the install tree of the compiler
+# being built; programs in there won't even run.
+if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
+  # Search for pre-installed headers if nothing else fits.
+  FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
+fi
+
+if test "x${use_gnu_ld}" = x &&
+   echo " ${configdirs} " | grep " ld " > /dev/null ; then
+  # Arrange for us to find uninstalled linker scripts.
+  FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
+fi
+
+if test "x${CC_FOR_TARGET+set}" = xset; then
+  :
+elif test -d ${srcdir}/gcc; then
+  CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
+elif test "$host" = "$target"; then
+  CC_FOR_TARGET='$(CC)'
+else
+  CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
+fi
+CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+
+if test "x${GCJ_FOR_TARGET+set}" = xset; then
+  :
+elif test -d ${srcdir}/gcc; then
+  GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
+elif test "$host" = "$target"; then
+  GCJ_FOR_TARGET='gcj'
+else
+  GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
+fi
+GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+
+# Don't use libstdc++-v3's flags to configure/build itself.
+libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+
+if test "x${CXX_FOR_TARGET+set}" = xset; then
+  :
+elif test -d ${srcdir}/gcc; then
+  # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
+  # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
+  # default whereas gcc does not.
+  # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
+  # all other cases.
+  CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
+  RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
+elif test "$host" = "$target"; then
+  CXX_FOR_TARGET='$(CXX)'
+  RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
+else
+  CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
+  RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
+fi
+CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+
+qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
+qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
+
+# We want to defer the evaluation of `cmd`s and shell variables in
+# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
+# bootstrap.  We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
+# quotes, but we still have to duplicate `$'s so that shell variables
+# can be expanded by the nested make as shell variables, not as make
+# macros.
+qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
+qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
+
+# Wrap CC_FOR_TARGET and friends, for certain types of builds.
+CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
+GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
+CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
+RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
+CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
+RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
+
+# Makefile fragments.
+host_makefile_frag=${srcdir}/${host_makefile_frag}
+target_makefile_frag=${srcdir}/${target_makefile_frag}
+alphaieee_frag=${srcdir}/${alphaieee_frag}
+ospace_frag=${srcdir}/${ospace_frag}
+
+
+
+
+
+# Miscellanea: directories, flags, etc.
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Build module lists & subconfigure args.
+
+
+
+
+
+# Host module lists & subconfigure args.
+
+
+
+
+
+
+
+
+# Target module lists & subconfigure args.
+
+
+
+
+
+
+
+
+# Build tools.
+
+
+
+
+
+
+
+# Host tools.
+ncn_tool_prefix=
+test -n "$host_alias" && ncn_tool_prefix=$host_alias-
+ncn_target_tool_prefix=
+test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+
+ if test -n "$ncn_tool_prefix"; then
+  # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2683: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AR="${ncn_tool_prefix}ar"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+  echo "$ac_t""$AR" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR" ; then
+  if test $build = $host ; then
+    ncn_cv_AR=$AR
+    # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2716: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_AR"; then
+  ac_cv_prog_ncn_cv_AR="$ncn_cv_AR" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_AR="ar"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_AR" && ac_cv_prog_ncn_cv_AR="ar"
+fi
+fi
+ncn_cv_AR="$ac_cv_prog_ncn_cv_AR"
+if test -n "$ncn_cv_AR"; then
+  echo "$ac_t""$ncn_cv_AR" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    AR=$ncn_cv_AR
+  else
+    AR="${ncn_tool_prefix}ar"
+  fi
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+  # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2755: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AS="${ncn_tool_prefix}as"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+  echo "$ac_t""$AS" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AS" ; then
+  if test $build = $host ; then
+    ncn_cv_AS=$AS
+    # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2788: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_AS"; then
+  ac_cv_prog_ncn_cv_AS="$ncn_cv_AS" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_AS="as"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_AS" && ac_cv_prog_ncn_cv_AS="as"
+fi
+fi
+ncn_cv_AS="$ac_cv_prog_ncn_cv_AS"
+if test -n "$ncn_cv_AS"; then
+  echo "$ac_t""$ncn_cv_AS" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    AS=$ncn_cv_AS
+  else
+    AS="${ncn_tool_prefix}as"
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+  # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2827: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_DLLTOOL="${ncn_tool_prefix}dlltool"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+  echo "$ac_t""$DLLTOOL" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL" ; then
+  if test $build = $host ; then
+    ncn_cv_DLLTOOL=$DLLTOOL
+    # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2860: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_DLLTOOL"; then
+  ac_cv_prog_ncn_cv_DLLTOOL="$ncn_cv_DLLTOOL" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_DLLTOOL" && ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
+fi
+fi
+ncn_cv_DLLTOOL="$ac_cv_prog_ncn_cv_DLLTOOL"
+if test -n "$ncn_cv_DLLTOOL"; then
+  echo "$ac_t""$ncn_cv_DLLTOOL" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    DLLTOOL=$ncn_cv_DLLTOOL
+  else
+    DLLTOOL="${ncn_tool_prefix}dlltool"
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+  # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}ld; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2899: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$LD"; then
+  ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_LD="${ncn_tool_prefix}ld"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+LD="$ac_cv_prog_LD"
+if test -n "$LD"; then
+  echo "$ac_t""$LD" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_LD" ; then
+  if test $build = $host ; then
+    ncn_cv_LD=$LD
+    # Extract the first word of "ld", so it can be a program name with args.
+set dummy ld; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2932: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_LD"; then
+  ac_cv_prog_ncn_cv_LD="$ncn_cv_LD" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_LD="ld"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_LD" && ac_cv_prog_ncn_cv_LD="ld"
+fi
+fi
+ncn_cv_LD="$ac_cv_prog_ncn_cv_LD"
+if test -n "$ncn_cv_LD"; then
+  echo "$ac_t""$ncn_cv_LD" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    LD=$ncn_cv_LD
+  else
+    LD="${ncn_tool_prefix}ld"
+  fi
+else
+  LD="$ac_cv_prog_LD"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+  # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2971: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$NM"; then
+  ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_NM="${ncn_tool_prefix}nm"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+NM="$ac_cv_prog_NM"
+if test -n "$NM"; then
+  echo "$ac_t""$NM" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_NM" ; then
+  if test $build = $host ; then
+    ncn_cv_NM=$NM
+    # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3004: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_NM"; then
+  ac_cv_prog_ncn_cv_NM="$ncn_cv_NM" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_NM="nm"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_NM" && ac_cv_prog_ncn_cv_NM="nm"
+fi
+fi
+ncn_cv_NM="$ac_cv_prog_ncn_cv_NM"
+if test -n "$ncn_cv_NM"; then
+  echo "$ac_t""$ncn_cv_NM" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    NM=$ncn_cv_NM
+  else
+    NM="${ncn_tool_prefix}nm"
+  fi
+else
+  NM="$ac_cv_prog_NM"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+  # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3043: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="${ncn_tool_prefix}ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB" ; then
+  if test $build = $host ; then
+    ncn_cv_RANLIB=$RANLIB
+    # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3076: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_RANLIB"; then
+  ac_cv_prog_ncn_cv_RANLIB="$ncn_cv_RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_RANLIB" && ac_cv_prog_ncn_cv_RANLIB=":"
+fi
+fi
+ncn_cv_RANLIB="$ac_cv_prog_ncn_cv_RANLIB"
+if test -n "$ncn_cv_RANLIB"; then
+  echo "$ac_t""$ncn_cv_RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    RANLIB=$ncn_cv_RANLIB
+  else
+    RANLIB=":"
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+  # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3115: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$WINDRES"; then
+  ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_WINDRES="${ncn_tool_prefix}windres"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+WINDRES="$ac_cv_prog_WINDRES"
+if test -n "$WINDRES"; then
+  echo "$ac_t""$WINDRES" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_WINDRES" ; then
+  if test $build = $host ; then
+    ncn_cv_WINDRES=$WINDRES
+    # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3148: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_WINDRES"; then
+  ac_cv_prog_ncn_cv_WINDRES="$ncn_cv_WINDRES" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_WINDRES="windres"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_WINDRES" && ac_cv_prog_ncn_cv_WINDRES="windres"
+fi
+fi
+ncn_cv_WINDRES="$ac_cv_prog_ncn_cv_WINDRES"
+if test -n "$ncn_cv_WINDRES"; then
+  echo "$ac_t""$ncn_cv_WINDRES" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    WINDRES=$ncn_cv_WINDRES
+  else
+    WINDRES="${ncn_tool_prefix}windres"
+  fi
+else
+  WINDRES="$ac_cv_prog_WINDRES"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+  # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3187: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$OBJCOPY"; then
+  ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_OBJCOPY="${ncn_tool_prefix}objcopy"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+OBJCOPY="$ac_cv_prog_OBJCOPY"
+if test -n "$OBJCOPY"; then
+  echo "$ac_t""$OBJCOPY" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_OBJCOPY" ; then
+  if test $build = $host ; then
+    ncn_cv_OBJCOPY=$OBJCOPY
+    # Extract the first word of "objcopy", so it can be a program name with args.
+set dummy objcopy; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3220: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_OBJCOPY"; then
+  ac_cv_prog_ncn_cv_OBJCOPY="$ncn_cv_OBJCOPY" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_OBJCOPY" && ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
+fi
+fi
+ncn_cv_OBJCOPY="$ac_cv_prog_ncn_cv_OBJCOPY"
+if test -n "$ncn_cv_OBJCOPY"; then
+  echo "$ac_t""$ncn_cv_OBJCOPY" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    OBJCOPY=$ncn_cv_OBJCOPY
+  else
+    OBJCOPY="${ncn_tool_prefix}objcopy"
+  fi
+else
+  OBJCOPY="$ac_cv_prog_OBJCOPY"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+  # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}objdump; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3259: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_OBJDUMP="${ncn_tool_prefix}objdump"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+OBJDUMP="$ac_cv_prog_OBJDUMP"
+if test -n "$OBJDUMP"; then
+  echo "$ac_t""$OBJDUMP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP" ; then
+  if test $build = $host ; then
+    ncn_cv_OBJDUMP=$OBJDUMP
+    # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3292: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_OBJDUMP"; then
+  ac_cv_prog_ncn_cv_OBJDUMP="$ncn_cv_OBJDUMP" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_OBJDUMP="objdump"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_OBJDUMP" && ac_cv_prog_ncn_cv_OBJDUMP="objdump"
+fi
+fi
+ncn_cv_OBJDUMP="$ac_cv_prog_ncn_cv_OBJDUMP"
+if test -n "$ncn_cv_OBJDUMP"; then
+  echo "$ac_t""$ncn_cv_OBJDUMP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    OBJDUMP=$ncn_cv_OBJDUMP
+  else
+    OBJDUMP="${ncn_tool_prefix}objdump"
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+
+
+
+
+
+
+
+
+# Target tools.
+ if test -n "$ncn_target_tool_prefix"; then
+  # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3340: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AR_FOR_TARGET"; then
+  ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+  echo "$ac_t""$AR_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
+  if test $build = $target ; then
+    ncn_cv_AR_FOR_TARGET=$AR_FOR_TARGET
+    # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3373: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_AR_FOR_TARGET"; then
+  ac_cv_prog_ncn_cv_AR_FOR_TARGET="$ncn_cv_AR_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
+fi
+fi
+ncn_cv_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_AR_FOR_TARGET"
+if test -n "$ncn_cv_AR_FOR_TARGET"; then
+  echo "$ac_t""$ncn_cv_AR_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    AR_FOR_TARGET=$ncn_cv_AR_FOR_TARGET
+  else
+    AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+  fi
+else
+  AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+  # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3412: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AS_FOR_TARGET"; then
+  ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+  echo "$ac_t""$AS_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
+  if test $build = $target ; then
+    ncn_cv_AS_FOR_TARGET=$AS_FOR_TARGET
+    # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3445: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_AS_FOR_TARGET"; then
+  ac_cv_prog_ncn_cv_AS_FOR_TARGET="$ncn_cv_AS_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
+fi
+fi
+ncn_cv_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_AS_FOR_TARGET"
+if test -n "$ncn_cv_AS_FOR_TARGET"; then
+  echo "$ac_t""$ncn_cv_AS_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    AS_FOR_TARGET=$ncn_cv_AS_FOR_TARGET
+  else
+    AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+  fi
+else
+  AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+  # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3484: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$DLLTOOL_FOR_TARGET"; then
+  ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+  echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
+  if test $build = $target ; then
+    ncn_cv_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+    # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3517: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
+  ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="$ncn_cv_DLLTOOL_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
+fi
+fi
+ncn_cv_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET"
+if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
+  echo "$ac_t""$ncn_cv_DLLTOOL_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    DLLTOOL_FOR_TARGET=$ncn_cv_DLLTOOL_FOR_TARGET
+  else
+    DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+  fi
+else
+  DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+  # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3556: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$LD_FOR_TARGET"; then
+  ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+  echo "$ac_t""$LD_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
+  if test $build = $target ; then
+    ncn_cv_LD_FOR_TARGET=$LD_FOR_TARGET
+    # Extract the first word of "ld", so it can be a program name with args.
+set dummy ld; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3589: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_LD_FOR_TARGET"; then
+  ac_cv_prog_ncn_cv_LD_FOR_TARGET="$ncn_cv_LD_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
+fi
+fi
+ncn_cv_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_LD_FOR_TARGET"
+if test -n "$ncn_cv_LD_FOR_TARGET"; then
+  echo "$ac_t""$ncn_cv_LD_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    LD_FOR_TARGET=$ncn_cv_LD_FOR_TARGET
+  else
+    LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+  fi
+else
+  LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+  # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3628: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$NM_FOR_TARGET"; then
+  ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+  echo "$ac_t""$NM_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+  if test $build = $target ; then
+    ncn_cv_NM_FOR_TARGET=$NM_FOR_TARGET
+    # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3661: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_NM_FOR_TARGET"; then
+  ac_cv_prog_ncn_cv_NM_FOR_TARGET="$ncn_cv_NM_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
+fi
+fi
+ncn_cv_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_NM_FOR_TARGET"
+if test -n "$ncn_cv_NM_FOR_TARGET"; then
+  echo "$ac_t""$ncn_cv_NM_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    NM_FOR_TARGET=$ncn_cv_NM_FOR_TARGET
+  else
+    NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+  fi
+else
+  NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+  # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3700: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB_FOR_TARGET"; then
+  ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+  echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+  if test $build = $target ; then
+    ncn_cv_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+    # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3733: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
+  ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="$ncn_cv_RANLIB_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET=":"
+fi
+fi
+ncn_cv_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET"
+if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
+  echo "$ac_t""$ncn_cv_RANLIB_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    RANLIB_FOR_TARGET=$ncn_cv_RANLIB_FOR_TARGET
+  else
+    RANLIB_FOR_TARGET=":"
+  fi
+else
+  RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+  # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3772: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$WINDRES_FOR_TARGET"; then
+  ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+  echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
+  if test $build = $target ; then
+    ncn_cv_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+    # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3805: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
+  ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="$ncn_cv_WINDRES_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
+fi
+fi
+ncn_cv_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET"
+if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
+  echo "$ac_t""$ncn_cv_WINDRES_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+    WINDRES_FOR_TARGET=$ncn_cv_WINDRES_FOR_TARGET
+  else
+    WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+  fi
+else
+  WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+fi
+
+
+
+
+
+
+
+
+
+
+
+# Fix up target tools.
+if test "x${build}" = "x${host}" ; then
+  # In this case, the newly built tools can and should be used,
+  # so we override the results of the autoconf tests.
+  # This should really only happen when the tools are actually being built,
+  # but that's a further refinement.  The new build scheme, where
+  # tools are built into a structure paralleling where they're installed,
+  # should also eliminate all of this cleanly.
+  AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
+  AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
+  DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
+  LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
+  NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
+  RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
+  WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
+fi
+# Certain tools may need extra flags.
+AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
+RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
+NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:3872: checking whether to enable maintainer-specific portions of Makefiles" >&5
+# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+
+
+if test "$USE_MAINTAINER_MODE" = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi	
+MAINT=$MAINTAINER_MODE_TRUE
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
 EOF
-                        ;;
-                esac
-        fi
-
-        # Install a makefile, and make it set VPATH
-        # if necessary so that the sources are found.
-        # Also change its value of srcdir.
-        # NOTE: Makefile generation constitutes the majority of the time in configure.  Hence, this section has
-        # been somewhat optimized and is perhaps a bit twisty.
-
-        # code is order so as to try to sed the smallest input files we know.
-        # so do these separately because I don't trust the order of sed -e expressions.
-
-        # the five makefile fragments MUST end up in the resulting Makefile in this order: 
-        # package macros, target, host, site, and package rules.
-
-        if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then
-
-            # Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem.
-            rm -f ${subdir}/${Makefile}.tem
-            case "${package_makefile_rules_frag}" in
-              "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
-              *)
-                      if [ ! -f ${package_makefile_rules_frag} ] ; then
-                              package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag}
-                      fi
-                      if [ -f ${package_makefile_rules_frag} ] ; then
-                              sed -e "/^####/  r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem
-                      else
-                              echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2
-                              echo '***' is missing in ${PWD=`pwd`}. 1>&2
-                              cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
-                      fi
-            esac
-            # working copy now in ${Makefile}.tem
-
-            # Conditionalize for this site.
-            rm -f ${Makefile}
-              case "${site}" in
-              "") mv ${subdir}/Makefile.tem ${Makefile} ;;
-              *)
-                      site_makefile_frag=${srcdir}/config/ms-${site}
-
-                      if [ -f ${site_makefile_frag} ] ; then
-                              sed -e "/^####/  r ${site_makefile_frag}" ${subdir}/Makefile.tem \
-                                      > ${Makefile}
-                      else
-                              mv ${subdir}/Makefile.tem ${Makefile}
-                              site_makefile_frag=
-                      fi
-                      ;;
-            esac
-            # working copy now in ${Makefile}
-
-            # Conditionalize the makefile for this host.
-            rm -f ${subdir}/Makefile.tem
-            case "${host_makefile_frag}" in
-              "") mv ${Makefile} ${subdir}/Makefile.tem ;;
-              *)
-                      if [ ! -f ${host_makefile_frag} ] ; then
-                              host_makefile_frag=${srcdir}/${host_makefile_frag}
-                      fi
-                      if [ -f ${host_makefile_frag} ] ; then
-                              sed -e "/^####/  r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
-                      else
-                              echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
-                              echo '***' is missing in ${PWD=`pwd`}. 1>&2
-                              mv ${Makefile} ${subdir}/Makefile.tem
-                      fi
-            esac
-            # working copy now in ${subdir)/Makefile.tem
-
-            # Conditionalize the makefile for this target.
-            rm -f ${Makefile}
-            case "${target_makefile_frag}" in
-              "") mv ${subdir}/Makefile.tem ${Makefile} ;;
-              *)
-                      if [ ! -f ${target_makefile_frag} ] ; then
-                              target_makefile_frag=${srcdir}/${target_makefile_frag}
-                      fi
-                      if [ -f ${target_makefile_frag} ] ; then
-                              sed -e "/^####/  r ${target_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
-                      else
-                              mv ${subdir}/Makefile.tem ${Makefile}
-                              target_makefile_frag=
-                      fi
-                      ;;
-            esac
-            # working copy now in ${Makefile}
-
-            # Emit the default values of this package's macros.
-            rm -f ${subdir}/Makefile.tem
-            case "${package_makefile_frag}" in
-              "") mv ${Makefile} ${subdir}/Makefile.tem ;;
-              *)
-                      if [ ! -f ${package_makefile_frag} ] ; then
-                              package_makefile_frag=${srcdir}/${package_makefile_frag}
-                      fi
-                      if [ -f ${package_makefile_frag} ] ; then
-                              sed -e "/^####/  r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
-                      else
-                              echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2
-                              echo '***' is missing in ${PWD=`pwd`}. 1>&2
-                              mv ${Makefile} ${subdir}/Makefile.tem
-                      fi
-            esac
-            # real copy now in ${subdir}/Makefile.tem
-
-            # prepend warning about editting, and a bunch of variables.
-            rm -f ${Makefile}
-            cat > ${Makefile} <<EOF
-# ${NO_EDIT}
-VPATH = ${makesrcdir}
-links = ${configlinks}
-host_alias = ${host_alias}
-host_cpu = ${host_cpu}
-host_vendor = ${host_vendor}
-host_os = ${host_os}
-host_canonical = ${host_cpu}-${host_vendor}-${host_os}
-target_alias = ${target_alias}
-target_cpu = ${target_cpu}
-target_vendor = ${target_vendor}
-target_os = ${target_os}
-target_canonical = ${target_cpu}-${target_vendor}-${target_os}
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
 EOF
-	    case "${build}" in
-	      "") ;;
-	      *)  cat >> ${Makefile} << EOF
-build_alias = ${build_alias}
-build_cpu = ${build_cpu}
-build_vendor = ${build_vendor}
-build_os = ${build_os}
-build_canonical = ${build_cpu}-${build_vendor}-${build_os}
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
 EOF
-	    esac
-
-            case "${package_makefile_frag}" in
-              "") ;;
-              /*) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
-              *)  echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
-            esac
-
-            case "${target_makefile_frag}" in
-              "") ;;
-              /*) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
-              *)  echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
-            esac
-
-            case "${host_makefile_frag}" in
-              "") ;;
-              /*) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
-              *)  echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
-            esac
-
-            if [ "${site_makefile_frag}" != "" ] ; then
-                echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
-            fi 
-
-	    # record if we want to build shared libs.
-	    if test -z "${enable_shared}"; then
-	        echo enable_shared = no >> ${Makefile}
-	    else
-	        echo enable_shared = ${enable_shared} >> ${Makefile}
-	    fi
-	    # record if we want to rumtime library stuff installed in libsubdir.
-	    if test -z "${enable_version_specific_runtime_libs}"; then
-	        echo enable_version_specific_runtime_libs = no >> ${Makefile}
-	    else
-	        echo enable_version_specific_runtime_libs = ${enable_version_specific_runtime_libs} >> ${Makefile}
-	    fi
-
-	    # Emit a macro which describes the file containing gcc's
-	    # version number.
-	    echo gcc_version_trigger = ${gcc_version_trigger} >> ${Makefile}
-	    # And emit a macro defining gcc's version number.
-	    echo gcc_version = ${gcc_version} >> ${Makefile}
-
-            # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
-            # remove any form feeds.
-            if [ -z "${subdirs}" ]; then
-                rm -f ${subdir}/Makefile.tm2
-                sed -e "s:^SUBDIRS[ 	]*=.*$:SUBDIRS = ${configdirs}:" \
-                    -e "s:^NONSUBDIRS[ 	]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
-                    ${subdir}/Makefile.tem > ${subdir}/Makefile.tm2
-                rm -f ${subdir}/Makefile.tem
-                mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem
-	    fi
-	    sed     -e "s|^prefix[ 	]*=.*$|prefix = ${prefix}|" \
-                    -e "s|^exec_prefix[ 	]*=.*$|exec_prefix = ${exec_prefix}|" \
-                    -e "s|^bindir[ 	]*=.*$|bindir = ${bindir}|" \
-                    -e "s|^sbindir[ 	]*=.*$|sbindir = ${sbindir}|" \
-                    -e "s|^libexecdir[ 	]*=.*$|libexecdir = ${libexecdir}|" \
-                    -e "s|^datadir[ 	]*=.*$|datadir = ${datadir}|" \
-                    -e "s|^sysconfdir[ 	]*=.*$|sysconfdir = ${sysconfdir}|" \
-                    -e "s|^sharedstatedir[ 	]*=.*$|sharedstatedir = ${sharedstatedir}|" \
-                    -e "s|^localstatedir[ 	]*=.*$|localstatedir = ${localstatedir}|" \
-                    -e "s|^libdir[ 	]*=.*$|libdir = ${libdir}|" \
-                    -e "s|^includedir[ 	]*=.*$|includedir = ${includedir}|" \
-                    -e "s|^oldincludedir[ 	]*=.*$|oldincludedir = ${oldincludedir}|" \
-                    -e "s|^infodir[ 	]*=.*$|infodir = ${infodir}|" \
-                    -e "s|^mandir[ 	]*=.*$|mandir = ${mandir}|" \
-		    -e "/^CC[ 	]*=/{
-			:loop1
-			/\\\\$/ N
-			s/\\\\\\n//g
-			t loop1
-			s%^CC[ 	]*=.*$%CC = ${CC}%
-			}" \
-		    -e "/^CXX[ 	]*=/{
-			:loop2
-			/\\\\$/ N
-			s/\\\\\\n//g
-			t loop2
-			s%^CXX[ 	]*=.*$%CXX = ${CXX}%
-			}" \
-		    -e "/^CFLAGS[ 	]*=/{
-			:loop3
-			/\\\\$/ N
-			s/\\\\\\n//g
-			t loop3
-			s%^CFLAGS[ 	]*=.*$%CFLAGS = ${CFLAGS}%
-			}" \
-		    -e "/^CXXFLAGS[ 	]*=/{
-			:loop4
-			/\\\\$/ N
-			s/\\\\\\n//g
-			t loop4
-			s%^CXXFLAGS[ 	]*=.*$%CXXFLAGS = ${CXXFLAGS}%
-			}" \
-		    -e "s|^SHELL[	 ]*=.*$|SHELL = ${config_shell}|" \
-                    -e "s|^srcdir[ 	]*=.*$|srcdir = ${makesrcdir}|" \
-                    -e "s/
-//" \
-                    -e "s:^program_prefix[ 	]*=.*$:program_prefix = ${program_prefix}:" \
-                    -e "s:^program_suffix[ 	]*=.*$:program_suffix = ${program_suffix}:" \
-                    -e "s:^program_transform_name[ 	]*=.*$:program_transform_name = ${program_transform_name}:" \
-                    -e "s|^tooldir[ 	]*=.*$|tooldir = ${tooldir}|" \
-                    -e "s|^build_tooldir[ 	]*=.*$|build_tooldir = ${tooldir}|" \
-		    -e "s:^DEFAULT_YACC[	 ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \
-		    -e "s:^DEFAULT_LEX[	 ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
-		    -e "s:^DEFAULT_M4[  ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \
-                    ${subdir}/Makefile.tem >> ${Makefile}
-  
-	    sed -e "s:^GDB_TK[	 ]*=.*$:GDB_TK = ${GDB_TK}:" ${Makefile} >${Makefile}.tem
-	    mv -f ${Makefile}.tem ${Makefile}
-
-	    # If this is a Canadian Cross, preset the values of many more
-	    # tools.
-	    if [ "${build}" != "${host}" ]; then
-		for var in ${tools}; do
-		    eval val=\$${var}
-		    sed -e "/^${var}[ 	]*=/{
-			   :loop1
-			   /\\\\$/ N
-			   /\\\\$/ b loop1
-			   s/\\\\\\n//g
-			   s%^${var}[ 	]*=.*$%${var} = ${val}%
-			   }" ${Makefile} > ${Makefile}.tem
-		    mv -f ${Makefile}.tem ${Makefile}
-		done
-	    fi
-
-            # final copy now in ${Makefile}
-
-        else
-           echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
-        fi
-
-        rm -f ${subdir}/Makefile.tem
-
-        case "${host_makefile_frag}" in
-        "") using= ;;
-        *) using="and \"${host_makefile_frag}\"" ;;
-        esac
-
-        case "${target_makefile_frag}" in
-        "") ;;
-        *) using="${using} and \"${target_makefile_frag}\"" ;;
-        esac
-
-        case "${site_makefile_frag}" in
-        "") ;;
-        *) using="${using} and \"${site_makefile_frag}\"" ;;
-        esac
-
-        newusing=`echo "${using}" | sed 's/and/using/'`
-        using=${newusing}
-        echo "Created \"${Makefile}\" in" ${PWD=`pwd`} ${using}
-
-        . ${tmpfile}.pos
-
-        # describe the chosen configuration in config.status.
-        # Make that file a shellscript which will reestablish
-        # the same configuration.  Used in Makefiles to rebuild
-        # Makefiles.
-
-        case "${norecursion}" in
-        "") arguments="${arguments} --norecursion" ;;
-        *) ;;
-        esac
-
-        if [ ${subdir} = . ] ; then
-            echo "#!/bin/sh
-# ${NO_EDIT}
-# This directory was configured as follows:
-${progname}" ${arguments}  "
-# ${using}" > ${subdir}/config.new
-        else
-            echo "#!/bin/sh
-# ${NO_EDIT}
-# This directory was configured as follows:
-cd ${invsubdir}
-${progname}" ${arguments}  "
-# ${using}" > ${subdir}/config.new
-        fi
-        chmod a+x ${subdir}/config.new
-        if [ -r ${subdir}/config.back ] ; then
-                mv -f ${subdir}/config.back ${subdir}/config.status
-        fi
-	${config_shell} ${moveifchange} ${subdir}/config.new ${subdir}/config.status
-        ;;
-
-    *)  rm -f ${Makefile} ${subdir}/config.status ${links} ;;
-    esac
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
+/@maybe_dependencies@/r $maybe_dependencies
+s%@maybe_dependencies@%%g
+/@serialization_dependencies@/r $serialization_dependencies
+s%@serialization_dependencies@%%g
+/@host_makefile_frag@/r $host_makefile_frag
+s%@host_makefile_frag@%%g
+/@target_makefile_frag@/r $target_makefile_frag
+s%@target_makefile_frag@%%g
+/@alphaieee_frag@/r $alphaieee_frag
+s%@alphaieee_frag@%%g
+/@ospace_frag@/r $ospace_frag
+s%@ospace_frag@%%g
+s%@SET_LIB_PATH@%$SET_LIB_PATH%g
+s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
+s%@BUILD_PREFIX@%$BUILD_PREFIX%g
+s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
+s%@configlinks@%$configlinks%g
+s%@gcc_version_trigger@%$gcc_version_trigger%g
+s%@gcc_version@%$gcc_version%g
+s%@tooldir@%$tooldir%g
+s%@build_tooldir@%$build_tooldir%g
+s%@GDB_TK@%$GDB_TK%g
+s%@gxx_include_dir@%$gxx_include_dir%g
+s%@libstdcxx_incdir@%$libstdcxx_incdir%g
+s%@build_subdir@%$build_subdir%g
+s%@build_configargs@%$build_configargs%g
+s%@configure_build_modules@%$configure_build_modules%g
+s%@all_build_modules@%$all_build_modules%g
+s%@host_configargs@%$host_configargs%g
+s%@configdirs@%$configdirs%g
+s%@configure_host_modules@%$configure_host_modules%g
+s%@all_host_modules@%$all_host_modules%g
+s%@check_host_modules@%$check_host_modules%g
+s%@install_host_modules@%$install_host_modules%g
+s%@install_host_modules_nogcc@%$install_host_modules_nogcc%g
+s%@target_subdir@%$target_subdir%g
+s%@target_configargs@%$target_configargs%g
+s%@target_configdirs@%$target_configdirs%g
+s%@configure_target_modules@%$configure_target_modules%g
+s%@all_target_modules@%$all_target_modules%g
+s%@check_target_modules@%$check_target_modules%g
+s%@install_target_modules@%$install_target_modules%g
+s%@BISON@%$BISON%g
+s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
+s%@LEX@%$LEX%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@YACC@%$YACC%g
+s%@config_shell@%$config_shell%g
+s%@AR@%$AR%g
+s%@ncn_cv_AR@%$ncn_cv_AR%g
+s%@AS@%$AS%g
+s%@ncn_cv_AS@%$ncn_cv_AS%g
+s%@DLLTOOL@%$DLLTOOL%g
+s%@ncn_cv_DLLTOOL@%$ncn_cv_DLLTOOL%g
+s%@LD@%$LD%g
+s%@ncn_cv_LD@%$ncn_cv_LD%g
+s%@NM@%$NM%g
+s%@ncn_cv_NM@%$ncn_cv_NM%g
+s%@RANLIB@%$RANLIB%g
+s%@ncn_cv_RANLIB@%$ncn_cv_RANLIB%g
+s%@WINDRES@%$WINDRES%g
+s%@ncn_cv_WINDRES@%$ncn_cv_WINDRES%g
+s%@OBJCOPY@%$OBJCOPY%g
+s%@ncn_cv_OBJCOPY@%$ncn_cv_OBJCOPY%g
+s%@OBJDUMP@%$OBJDUMP%g
+s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g
+s%@CC@%$CC%g
+s%@CXX@%$CXX%g
+s%@DEFAULT_YACC@%$DEFAULT_YACC%g
+s%@DEFAULT_LEX@%$DEFAULT_LEX%g
+s%@DEFAULT_M4@%$DEFAULT_M4%g
+s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
+s%@ncn_cv_AR_FOR_TARGET@%$ncn_cv_AR_FOR_TARGET%g
+s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
+s%@ncn_cv_AS_FOR_TARGET@%$ncn_cv_AS_FOR_TARGET%g
+s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
+s%@ncn_cv_DLLTOOL_FOR_TARGET@%$ncn_cv_DLLTOOL_FOR_TARGET%g
+s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
+s%@ncn_cv_LD_FOR_TARGET@%$ncn_cv_LD_FOR_TARGET%g
+s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
+s%@ncn_cv_NM_FOR_TARGET@%$ncn_cv_NM_FOR_TARGET%g
+s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
+s%@ncn_cv_RANLIB_FOR_TARGET@%$ncn_cv_RANLIB_FOR_TARGET%g
+s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
+s%@ncn_cv_WINDRES_FOR_TARGET@%$ncn_cv_WINDRES_FOR_TARGET%g
+s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
+s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
+s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
+s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
+s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
+s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
+s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
+s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
+s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
+s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
+s%@MAINT@%$MAINT%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
 done
-
-# If there are subdirectories, then recur.
-if [ -z "${norecursion}" ] && [ -n "${configdirs}" ] ; then 
-        for configdir in ${configdirs} ${extraconfigdirs} ; do
-
-		# If configdir contains ',' it is
-		# srcdir,builddir,target_alias
-		# These come from extraconfigdirs.
-		case ${configdir} in
-		*,*)
-		    eval `echo ${configdir} | sed -e 's/\([^,]*\),\([^,]*\),\(.*\)/cfg_dir=\1 bld_dir=\2 tgt_alias=\3/'`
-		    ;;
-		*)
-		    cfg_dir=${configdir}
-		    bld_dir=${configdir}
-		    tgt_alias=${target_alias}
-		    ;;
-		esac
-
-                if [ -d ${srcdir}/${cfg_dir} ] ; then
-                        eval echo Configuring ${configdir}... ${redirect}
-                        case "${srcdir}" in
-                        ".") ;;
-                        *)
-                                if [ ! -d ./${bld_dir} ] ; then
-                                        if mkdir ./${bld_dir} ; then
-                                                true
-                                        else
-                                                echo '***' "${progname}: could not make ${PWD=`pwd`}/${bld_dir}" 1>&2
-                                                exit 1
-                                        fi
-                                fi
-                                ;;
-                        esac
-
-                        POPDIR=${PWD=`pwd`}
-                        cd ${bld_dir} 
-
-### figure out what to do with srcdir
-                        case "${srcdir}" in
-                        ".") newsrcdir=${srcdir} ;; # no -srcdir option.  We're building in place.
-                        /*) # absolute path
-                                newsrcdir=${srcdir}/${cfg_dir}
-                                srcdiroption="--srcdir=${newsrcdir}"
-                                ;;
-                        ?:*) # absolute path on win32
-                                newsrcdir=${srcdir}/${cfg_dir}
-                                srcdiroption="--srcdir=${newsrcdir}"
-                                ;;
-                        *) # otherwise relative
-                                newsrcdir=../${srcdir}/${cfg_dir}
-                                srcdiroption="--srcdir=${newsrcdir}"
-                                ;;
-                        esac
-
-			# Handle --cache-file=../XXX
-			case "${cache_file}" in
-			"") # empty
-				;;
-			/*) # absolute path
-				cache_file_option="--cache-file=${cache_file}"
-				;;
-			?:*) # absolute path on win32
-				cache_file_option="--cache-file=${cache_file}"
-				;;
-			*) # relative path
-				cache_file_option="--cache-file=../${cache_file}"
-				;;
-			esac
-
-### check for guested configure, otherwise fix possibly relative progname
-                        if [ -f ${newsrcdir}/configure ] ; then
-                                recprog=${newsrcdir}/configure
-                        elif [ -f ${newsrcdir}/configure.in ] ; then
-                                case "${progname}" in
-                                /*)     recprog=${progname} ;;
-                                ?:*)    recprog=${progname} ;;
-                                *)      recprog=../${progname} ;;
-                                esac
-			else
-				eval echo No configuration information in ${cfg_dir} ${redirect}
-				recprog=
-                        fi
-
-### The recursion line is here.
-			if [ ! -z "${recprog}" ] ; then
-	                        if eval ${config_shell} ${recprog} ${verbose} ${buildopt} --host=${host_alias} --target=${tgt_alias} \
-        	                        ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
-                	                ${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${removing} ${other_options} ${redirect} ; then
-	                                true
-        	                else
-					echo Configure in `pwd` failed, exiting. 1>&2
-                	                exit 1
-                        	fi
-			fi
-
-                        cd ${POPDIR}
-                fi
-        done
-fi
-
-# Perform the same cleanup as the trap handler, minus the "exit 1" of course,
-# and reset the trap handler.
-rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos
-trap 0
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
 
 exit 0
-
-#
-# Local Variables:
-# fill-column: 131
-# End:
-#
-
-# end of configure
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
Index: trunk/src/binutils/ltcf-cxx.sh
===================================================================
--- trunk/src/binutils/ltcf-cxx.sh	(revision 604)
+++ trunk/src/binutils/ltcf-cxx.sh	(revision 606)
@@ -3,5 +3,5 @@
 # ltcf-cxx.sh - Create a C++ compiler specific configuration
 #
-# Copyright (C) 1996-1999,2000 Free Software Foundation, Inc.
+# Copyright (C) 1996-1999, 2000, 2001, 2003 Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
@@ -69,9 +69,14 @@
 
   # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if eval "`$CC -print-prog-name=ld` --version 2>&1" | \
-      egrep 'GNU ld' > /dev/null; then
-    with_gnu_ld=yes
-
+  # archiving commands below assume that GNU ld is being used.  The
+  # assumption here is that the linker is going to be the same as that
+  # used by the C compiler.  For the purposes of GCC, this is ok, but
+  # if someone uses g++ along with a non-GNU C compiler that doesn't
+  # use GNU ld, we may lose.  This is ok for the toolchain tree, since
+  # the only users of ltcf-cxx.sh are libstdc++-v3 and libjava,
+  # anyway, and those use both gcc and g++, so the settings are bound
+  # to be the same.
+
+  if test "$with_gnu_ld" = yes; then
     archive_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
     archive_expsym_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
@@ -93,5 +98,4 @@
     fi
   else
-    with_gnu_ld=no
     wlarc=
 
@@ -107,50 +111,119 @@
   # what "hidden" libraries, object files and flags are used when
   # linking a shared library.
-  output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
 
 else
   with_gcc=no
-  with_gnu_ld=no
   wlarc=
 fi
 
-# In general, the C++ compiler should always link C++ objects.
-case $target in
-*aix3* | *aix4*)
-  # AIX just has to be different, doesn't it? :-\
-  LD=makeC++SharedLib_r
-  LDFLAGS="$LDFLAGS -p 0"
-  ;;
-*)
-  LD="$CC"
-  LDFLAGS="$LDFLAGS"
-  ;;
-esac
-
-
 # PORTME: fill in a description of your system's C++ link characteristics
-case "$host_os" in
+case $host_os in
   aix3*)
     # FIXME: insert proper C++ library support
     ld_shlibs=no
     ;;
-  aix4*)
-    archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-    # -bexpall does not export symbols beginning with underscore (_)
+  aix4* | aix5*)
+    archive_cmds=''
+    hardcode_direct=yes
+    hardcode_libdir_separator=':'
+    link_all_deplibs=yes
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+    if test "$with_gcc" = yes; then
+      case $host_os in aix4.[012]|aix4.[012].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+        collect2name=`${CC} -print-prog-name=collect2`
+        if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+        then
+	  # We have reworked collect2
+	  hardcode_direct=yes
+        else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+        fi
+      esac
+      shared_flag='-shared'
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+        shared_flag='${wl}-G'
+      else
+        shared_flag='${wl}-bM:SRE'
+      fi
+    fi
+
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      if test $with_gnu_ld = no; then
+        exp_sym_flag='-Bexport'
+        no_entry_flag=""
+      fi
+    else
+      # Test if we are trying to use run time linking, or normal AIX style linking.
+      # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
+      aix_use_runtimelinking=no
+      for ld_flag in $LDFLAGS; do
+        if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
+          aix_use_runtimelinking=yes
+          break
+        fi
+      done
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
     always_export_symbols=yes
-    # Exported symbols can be pulled into shared objects from archives
-    whole_archive_flag_spec=' '
-    build_libtool_need_lc=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+      allow_undefined_flag=' -Wl,-G'
+      archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}-brtl \${wl}$exp_sym_flag:\$export_symbols"
+     else
+      if test "$host_cpu" = ia64; then
+        if test $with_gnu_ld = no; then
+          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+          allow_undefined_flag="-z nodefs"
+          archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+        fi
+      else
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+        # Warning - without using the other run time loading flags, -berok will
+        #           link without error, but may produce a broken library.
+        no_undefined_flag=' ${wl}-bnoerok'
+        allow_undefined_flag=' ${wl}-berok'
+        # -bexpall does not export symbols beginning with underscore (_)
+        always_export_symbols=yes
+        # Exported symbols can be pulled into shared objects from archives
+        whole_archive_flag_spec=' '
+        build_libtool_need_lc=yes
+        # This is similar to how AIX traditionally builds it's shared libraries.
+        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
     ;;
   chorus*)
-    case "$cc_basename" in
+    case $cc_basename in
       *)
         # FIXME: insert proper C++ library support
         ld_shlibs=no
         ;;
-    esac 
+    esac
     ;;
   dgux*)
-    case "$cc_basename" in
+    case $cc_basename in
       ec++)
         # FIXME: insert proper C++ library support
@@ -168,11 +241,32 @@
     esac
     ;;
+  freebsd[12]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    ld_shlibs=no
+    ;;
   freebsd*)
-    # FreeBSD uses GNU C++ and GNU ld
-    # FIXME: insert proper C++ library support
-    ld_shlibs=no
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    ld_shlibs=yes
+    ;;
+  gnu*)
     ;;
   hpux*)
-    case "$cc_basename" in
+    if test $with_gnu_ld = no; then
+      case "$host_cpu" in
+	ia64*)
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_shlibpath_var=no ;;
+	*)
+	  hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ;;
+      esac
+      hardcode_direct=yes
+      hardcode_libdir_separator=:
+      export_dynamic_flag_spec='${wl}-E'
+    fi
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
+
+    case $cc_basename in
       CC)
         # FIXME: insert proper C++ library support
@@ -180,15 +274,8 @@
         ;;
       aCC)
-	case "$host_os" in
+	case $host_os in
 	hpux9*) archive_cmds='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
 	*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;;
 	esac
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator=:
-	hardcode_direct=yes
-	hardcode_minus_L=yes # Not in the search PATH, but as the default
-			     # location of the library.
-	export_dynamic_flag_spec='${wl}-E'
-
         # Commands to make compiler produce verbose output that lists
         # what "hidden" libraries, object files and flags are used when
@@ -199,14 +286,30 @@
         # from the output so that they don't get included in the library
         # dependencies.
-        output_verbose_link_cmds='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
         ;;
       *)
-        # FIXME: insert proper C++ library support
-        ld_shlibs=no
+        if test $with_gcc = yes; then
+	  if test $with_gnu_ld = no; then
+	    case "$host_os" in
+	    hpux9*) archive_cmds='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+	    *)
+	      case "$host_cpu" in
+		ia64*)
+		  archive_cmds='$LD -b +h $soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' ;;
+		*)
+		  archive_cmds='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+	else
+	  # FIXME: insert proper C++ library support
+          ld_shlibs=no
+	fi
         ;;
     esac
     ;;
   irix5* | irix6*)
-    case "$cc_basename" in
+    case $cc_basename in
       CC)
         # SGI C++
@@ -222,7 +325,7 @@
         if test "$with_gcc" = yes; then
           if test "$with_gnu_ld" = no; then
-            archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+            archive_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
           else
-            archive_cmds='$LD -shared $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
+            archive_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
           fi
         fi
@@ -234,5 +337,5 @@
     ;;
   linux*)
-    case "$cc_basename" in
+    case $cc_basename in
       KCC)
         # Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -252,5 +355,5 @@
         # from the output so that they don't get included in the library
         # dependencies.
-        output_verbose_link_cmds='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
 
         hardcode_libdir_flag_spec='${wl}--rpath,$libdir'
@@ -278,5 +381,5 @@
         # from the output so that they don't get included in the library
         # dependencies.
-        output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
         ;;
     esac
@@ -291,5 +394,5 @@
     ;;
   mvs*)
-    case "$cc_basename" in
+    case $cc_basename in
       cxx)
         # FIXME: insert proper C++ library support
@@ -300,5 +403,5 @@
         ld_shlibs=no
         ;;
-    esac   
+    esac
     ;;
   netbsd*)
@@ -306,18 +409,5 @@
     ;;
   osf3*)
-    if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-    fi
-
-    case "$cc_basename" in
+    case $cc_basename in
       KCC)
         # Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -356,27 +446,27 @@
         # from the output so that they don't get included in the library
         # dependencies.
-        output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
         ;;
       *)
-        # FIXME: insert proper C++ library support
-        ld_shlibs=no
+	if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+	  allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	  archive_cmds='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+    else
+          # FIXME: insert proper C++ library support
+          ld_shlibs=no
+    fi
         ;;
     esac
     ;;
   osf4* | osf5*)
-    if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-    fi
-
-    case "$cc_basename" in
+    case $cc_basename in
       KCC)
         # Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -400,8 +490,12 @@
         ;;
       cxx)
-        allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-        archive_cmds='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-        
-        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+        allow_undefined_flag=' -expect_unresolved \*'
+        archive_cmds='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~
+	  echo "-hidden">> $lib.exp~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
+	  $rm $lib.exp'
+
+        hardcode_libdir_flag_spec='-rpath $libdir'
         hardcode_libdir_separator=:
 
@@ -414,9 +508,22 @@
         # from the output so that they don't get included in the library
         # dependencies.
-        output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
         ;;
       *)
-        # FIXME: insert proper C++ library support
-        ld_shlibs=no
+	if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+	  allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	  archive_cmds='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	  
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator=:
+	  
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+    else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs=no
+    fi
         ;;
     esac
@@ -427,5 +534,5 @@
     ;;
   sco*)
-    case "$cc_basename" in
+    case $cc_basename in
       CC)
         # FIXME: insert proper C++ library support
@@ -439,5 +546,5 @@
     ;;
   sunos4*)
-    case "$cc_basename" in
+    case $cc_basename in
       CC)
         # Sun C++ 4.x
@@ -457,8 +564,8 @@
     ;;
   solaris*)
-    case "$cc_basename" in
+    case $cc_basename in
       CC)
 	# Sun C++ 4.2, 5.x and Centerline C++
-        no_undefined_flag=' -ztext'
+        no_undefined_flag=' -zdefs'
         archive_cmds='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
         archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
@@ -467,5 +574,5 @@
         hardcode_libdir_flag_spec='-R$libdir'
         hardcode_shlibpath_var=no
-        case "$host_os" in
+        case $host_os in
           solaris2.[0-5] | solaris2.[0-5].*) ;;
           *)
@@ -487,5 +594,5 @@
         # from the output so that they don't get included in the library
         # dependencies.
-        output_verbose_link_cmds='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
 
 	# Archives containing C++ object files must be created using
@@ -505,24 +612,25 @@
         # GNU C++ compiler with Solaris linker
         if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+	  no_undefined_flag=' ${wl}-z ${wl}defs'
           if $CC --version | egrep -v '^2\.7' > /dev/null; then
-            archive_cmds='$LD -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
+            archive_cmds='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
             archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
 
             # Commands to make compiler produce verbose output that lists
             # what "hidden" libraries, object files and flags are used when
             # linking a shared library.
-            output_verbose_link_cmds="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
+            output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
           else
             # g++ 2.7 appears to require `-G' NOT `-shared' on this
             # platform.
-            archive_cmds='$LD -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
+            archive_cmds='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
             archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
 
             # Commands to make compiler produce verbose output that lists
             # what "hidden" libraries, object files and flags are used when
             # linking a shared library.
-            output_verbose_link_cmds="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
+            output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
           fi
 
@@ -530,8 +638,8 @@
         fi
         ;;
-    esac   
+    esac
     ;;
   tandem*)
-    case "$cc_basename" in
+    case $cc_basename in
       NCC)
         # NonStop-UX NCC 3.20
@@ -543,5 +651,5 @@
         ld_shlibs=no
         ;;
-    esac   
+    esac
     ;;
   unixware*)
@@ -571,7 +679,6 @@
 ac_cv_prog_cc_can_build_shared=$can_build_shared
 
-# It is not enough to reset these cached values, they must be unset.
-unset ac_cv_prog_cc_pic_works
-unset ac_cv_prog_cc_static_works
+ac_cv_prog_cc_pic_works=
+ac_cv_prog_cc_static_works=
 
 if test "$with_gcc" = yes; then
@@ -579,21 +686,13 @@
   ac_cv_prog_cc_static='-static'
 
-  case "$host_os" in
-  beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
-    # PIC is the default for these OSes.
-    ;;
+  case $host_os in
   aix*)
-    # Below there is a dirty hack to force normal static linking with -ldl
-    # The problem is because libdl dynamically linked with both libc and
-    # libC (AIX C++ library), which obviously doesn't included in libraries
-    # list by gcc. This cause undefined symbols with -static flags.
-    # This hack allows C programs to be linked with "-static -ldl", but
-    # we not sure about C++ programs.
-    ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC"
-    ;;
-  cygwin* | mingw* | os2*)
-    # This hack is so that the source file can tell whether it is being
-    # built for inclusion in a dll (and should export symbols for example).
-    ac_cv_prog_cc_pic='-DDLL_EXPORT'
+    # All AIX code is PIC.
+    if test "$host_cpu" = ia64; then
+      # AIX 5 now supports IA64 processor
+      lt_cv_prog_cc_static='-Bstatic'
+    else
+      lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+    fi
     ;;
   amigaos*)
@@ -603,4 +702,21 @@
     ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
     ;;
+  beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+    # PIC is the default for these OSes.
+    ;;
+  cygwin* | mingw* | os2*)
+    # This hack is so that the source file can tell whether it is being
+    # built for inclusion in a dll (and should export symbols for example).
+    ac_cv_prog_cc_pic='-DDLL_EXPORT'
+    ;;
+  darwin* | rhapsody*)
+    # PIC is the default on this platform
+    # Common symbols not allowed in MH_DYLIB files
+    lt_cv_prog_cc_pic='-fno-common'
+    ;;
+  *djgpp*)
+    # DJGPP does not support shared libraries at all
+    ac_cv_prog_cc_pic=
+    ;;
   sysv4*MP*)
     if test -d /usr/nec; then
@@ -613,18 +729,24 @@
   esac
 else
-  case "$host_os" in
-    aix4*)
+  case $host_os in
+    aix4* | aix5*)
       # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+        # AIX 5 now supports IA64 processor
+        lt_cv_prog_cc_static='-Bstatic'
+      else
+        lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+      fi
       ;;
     chorus*)
-      case "$cc_basename" in
+      case $cc_basename in
       cxch68)
         # Green Hills C++ Compiler
         # ac_cv_prog_cc_static="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
         ;;
-      esac 
+      esac
       ;;
     dgux*)
-      case "$cc_basename" in
+      case $cc_basename in
         ec++)
           ac_cv_prog_cc_pic='-KPIC'
@@ -641,6 +763,8 @@
       # FreeBSD uses GNU C++
       ;;
+    gnu*)
+      ;;
     hpux9* | hpux10* | hpux11*)
-      case "$cc_basename" in
+      case $cc_basename in
         CC)
           ac_cv_prog_cc_wl='-Wl,'
@@ -658,5 +782,5 @@
       ;;
     irix5* | irix6*)
-      case "$cc_basename" in
+      case $cc_basename in
         CC)
           ac_cv_prog_cc_wl='-Wl,'
@@ -669,5 +793,5 @@
       ;;
     linux*)
-      case "$cc_basename" in
+      case $cc_basename in
         KCC)
           # KAI C++ Compiler
@@ -691,5 +815,5 @@
       ;;
     mvs*)
-      case "$cc_basename" in
+      case $cc_basename in
         cxx)
           ac_cv_prog_cc_pic='-W c,exportall'
@@ -697,10 +821,10 @@
         *)
           ;;
-      esac   
+      esac
       ;;
     netbsd*)
       ;;
     osf3* | osf4* | osf5*)
-      case "$cc_basename" in
+      case $cc_basename in
         KCC)
           ac_cv_prog_cc_wl='--backend -Wl,'
@@ -725,5 +849,5 @@
       ;;
     sco*)
-      case "$cc_basename" in
+      case $cc_basename in
         CC)
           ac_cv_prog_cc_pic='-fPIC'
@@ -734,5 +858,5 @@
       ;;
     solaris*)
-      case "$cc_basename" in
+      case $cc_basename in
         CC)
           # Sun C++ 4.2, 5.x and Centerline C++
@@ -747,8 +871,8 @@
         *)
           ;;
-      esac   
+      esac
       ;;
     sunos4*)
-      case "$cc_basename" in
+      case $cc_basename in
         CC)
           # Sun C++ 4.x
@@ -765,5 +889,5 @@
       ;;
     tandem*)
-      case "$cc_basename" in
+      case $cc_basename in
         NCC)
           # NonStop-UX NCC 3.20
@@ -772,5 +896,5 @@
         *)
           ;;
-      esac   
+      esac
       ;;
     unixware*)
@@ -783,5 +907,15 @@
   esac
 fi
-ac_cv_prog_cc_pic="$ac_cv_prog_cc_pic -DPIC"
+
+case "$host_os" in
+    # Platforms which do not suport PIC and -DPIC is meaningless
+    # on them:
+    *djgpp*)
+      ac_cv_prog_cc_pic=
+      ;;
+    *)
+      ac_cv_prog_cc_pic="$ac_cv_prog_cc_pic -DPIC"
+      ;;
+esac
 
 
@@ -799,5 +933,5 @@
 
 
-if eval $ac_compile 2>&5; then
+if (eval $ac_compile) 2>&5; then
   # Parse the compiler output and extract the necessary
   # objects, libraries and library flags.
@@ -807,5 +941,5 @@
   pre_test_object_deps_done=no
 
-  for p in `eval $output_verbose_link_cmds`; do
+  for p in `eval $output_verbose_link_cmd`; do
 
     case $p in
Index: trunk/src/binutils/ltcf-gcj.sh
===================================================================
--- trunk/src/binutils/ltcf-gcj.sh	(revision 604)
+++ trunk/src/binutils/ltcf-gcj.sh	(revision 606)
@@ -3,5 +3,5 @@
 # ltcf-gcj.sh - Create a GCJ compiler specific configuration
 #
-# Copyright (C) 1996-1999, 2000, 2001 Free Software Foundation, Inc.
+# Copyright (C) 1996-1999, 2000, 2001, 2003 Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
@@ -42,5 +42,5 @@
 
 ## Linker Characteristics
-case "$host_os" in
+case $host_os in
 cygwin* | mingw*)
   # FIXME: the MSVC++ port hasn't been tested in a loooong time
@@ -60,9 +60,10 @@
 
   # See if GNU ld supports shared libraries.
-  case "$host_os" in
-  aix3* | aix4*)
-    # On AIX, the GNU linker is very broken
-    ld_shlibs=no
-    cat <<EOF 1>&2
+  case $host_os in
+  aix3* | aix4* | aix5*)
+    # On AIX/PPC, the GNU linker is very broken
+    if test "$host_cpu" != ia64; then
+      ld_shlibs=no
+      cat <<EOF 1>&2
 
 *** Warning: the GNU linker, at least up to release 2.9.1, is reported
@@ -73,4 +74,5 @@
 
 EOF
+    fi
     ;;
 
@@ -110,7 +112,7 @@
       sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/impgen.c~
       test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
+      if test "x$BUILD_CC" != "x" ; then $BUILD_CC -o impgen impgen.c ; \
       else $CC -o impgen impgen.c ; fi)~
-      $output_objdir/impgen $dir/$soname > $output_objdir/$soname-def'
+      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
 
     old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
@@ -121,5 +123,5 @@
     dll_entry=__cygwin_dll_entry@12
     dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-    case "$host_os" in
+    case $host_os in
     mingw*)
       # mingw values
@@ -152,21 +154,27 @@
       sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
 
+    # If the export-symbols file already is a .def file (1st line
+    # is EXPORTS), use it as is.
     # If DATA tags from a recent dlltool are present, honour them!
-    archive_expsym_cmds='echo EXPORTS > $output_objdir/$soname-def~
-      _lt_hint=1;
-      cat $export_symbols | while read symbol; do
-	set dummy \$symbol;
-	case \$# in
-	  2) echo "	\$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	  *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
-	esac;
-	_lt_hint=`expr 1 + \$_lt_hint`;
-      done~
+    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
+        cp $export_symbols $output_objdir/$soname-def;
+      else
+        echo EXPORTS > $output_objdir/$soname-def;
+        _lt_hint=1;
+        cat $export_symbols | while read symbol; do
+         set dummy \$symbol;
+         case \[$]# in
+           2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+           *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
+         esac;
+         _lt_hint=`expr 1 + \$_lt_hint`;
+        done;
+      fi~
       '"$ltdll_cmds"'
-      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_gcj_dll_switch' -Wl,-e,'$dll_entry' -o $lib '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
       $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_gcj_dll_switch' -Wl,-e,'$dll_entry' -o $lib '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-      $CC $output_objdir/$soname-exp '$lt_cv_gcj_dll_switch' -Wl,-e,'$dll_entry' -o $lib '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
+      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
     ;;
 
@@ -176,6 +184,6 @@
       wlarc=
     else
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
     fi
     ;;
@@ -240,5 +248,5 @@
 else
   # PORTME fill in a description of your system's linker (not GNU ld)
-  case "$host_os" in
+  case $host_os in
   aix3*)
     allow_undefined_flag=unsupported
@@ -255,37 +263,93 @@
     ;;
 
-  aix4*)
-    hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
+  aix4* | aix5*)
+    hardcode_direct=yes
     hardcode_libdir_separator=':'
+    link_all_deplibs=yes
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
     if test "$with_gcc" = yes; then
-      collect2name=`${CC} -print-prog-name=collect2`
-      if test -f "$collect2name" && \
-	 strings "$collect2name" | grep resolve_lib_name >/dev/null
-      then
-	# We have reworked collect2
-	hardcode_direct=yes
+      case $host_os in aix4.[012]|aix4.[012].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+        collect2name=`${CC} -print-prog-name=collect2`
+        if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+        then
+	  # We have reworked collect2
+	  hardcode_direct=yes
+        else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+        fi
+      esac
+      shared_flag='-shared'
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+        shared_flag='${wl}-G'
       else
-	# We have old collect2
-	hardcode_direct=unsupported
-	# It fails to find uninstalled libraries when the uninstalled
-	# path is not listed in the libpath.  Setting hardcode_minus_L
-	# to unsupported forces relinking
-	hardcode_minus_L=yes
-	hardcode_libdir_flag_spec='-L$libdir'
-	hardcode_libdir_separator=
+        shared_flag='${wl}-bM:SRE'
       fi
-      shared_flag='-shared'
-    else
-      shared_flag='${wl}-bM:SRE'
-      hardcode_direct=yes
-    fi
-    allow_undefined_flag=' ${wl}-berok'
-    archive_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
-    archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
-    case "$host_os" in aix4.[01]|aix4.[01].*)
-      # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
-      always_export_symbols=yes ;;
-    esac
-   ;;
+    fi
+
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      if test $with_gnu_ld = no; then
+        exp_sym_flag='-Bexport'
+        no_entry_flag=""
+      fi
+    else
+      # Test if we are trying to use run time linking, or normal AIX style linking.
+      # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
+      aix_use_runtimelinking=no
+      for ld_flag in $LDFLAGS; do
+        if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
+          aix_use_runtimelinking=yes
+          break
+        fi
+      done
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+    # -bexpall does not export symbols beginning with underscore (_)
+    always_export_symbols=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other run time loading flags (-brtl), -berok will
+      #           link without error, but may produce a broken library.
+      allow_undefined_flag=' ${wl}-berok'
+      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+      archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+    else
+      if test "$host_cpu" = ia64; then
+        if test $with_gnu_ld = no; then
+          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+          allow_undefined_flag="-z nodefs"
+          archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+        fi
+      else
+        allow_undefined_flag=' ${wl}-berok'
+        # -bexpall does not export symbols beginning with underscore (_)
+        always_export_symbols=yes
+        # Exported symbols can be pulled into shared objects from archives
+        whole_archive_flag_spec=' '
+        build_libtool_need_lc=yes
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+        # This is similar to how AIX traditionally builds it's shared libraries.
+        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+  ;;
 
   amigaos*)
@@ -312,5 +376,5 @@
     # FIXME: Should let the user specify the lib program.
     old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
-    fix_srcfile_path='`cygpath -w $srcfile`'
+    fix_srcfile_path='`cygpath -w "$srcfile"`'
     ;;
 
@@ -347,5 +411,5 @@
 
   hpux9* | hpux10* | hpux11*)
-    case "$host_os" in
+    case $host_os in
     hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
     *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
@@ -374,5 +438,5 @@
       archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
     else
-      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      archive_cmds='$LD -shared -nodefaultlibs -o $lib $libobjs $deplibs $linker_flags'      # ELF
     fi
     hardcode_libdir_flag_spec='${wl}-R$libdir'
@@ -428,16 +492,20 @@
 
   solaris*)
-    no_undefined_flag=' -z text'
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    no_undefined_flag=' ${wl}-z ${wl}defs'
+    archive_cmds='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
     archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_shlibpath_var=no
-    case "$host_os" in
+      $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+    # Commands to make compiler produce verbose output that lists
+    # what "hidden" libraries, object files and flags are used when
+    # linking a shared library.
+    output_verbose_link_cmds="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
+
+    hardcode_libdir_flag_spec='${wl}-R $wl$libdir'
+    hardcode_shlibpath_var=no
+    case $host_os in
     solaris2.[0-5] | solaris2.[0-5].*) ;;
     *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+      whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;;
     esac
     link_all_deplibs=yes
@@ -508,6 +576,11 @@
     ;;
 
-  unixware7*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+  sysv5uw7* | unixware7*)
+    no_undefined_flag='${wl}-z ${wl}text'
+    if test "$GCC" = yes; then
+      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+    else
+      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+    fi
     runpath_var='LD_RUN_PATH'
     hardcode_shlibpath_var=no
@@ -534,5 +607,5 @@
     ac_cv_prog_cc_static='-static'
 
-    case "$host_os" in
+    case $host_os in
     beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
@@ -547,4 +620,8 @@
       ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC"
       ;;
+    *djgpp*)
+      # DJGPP does not suppot shared libraries at all
+      ac_cv_prog_cc_pic=
+      ;;
     cygwin* | mingw* | os2*)
       # This hack is so that the source file can tell whether it is being
@@ -570,2 +647,5 @@
 # GCJ did not exist at the time GCC didn't implicitly link libc in.
 need_lc=no
+
+# All existing releases of GCJ support `-c -o'.
+lt_cv_compiler_c_o=yes
Index: trunk/src/binutils/ltmain.sh
===================================================================
--- trunk/src/binutils/ltmain.sh	(revision 604)
+++ trunk/src/binutils/ltmain.sh	(revision 606)
@@ -2,5 +2,6 @@
 # NOTE: Changing this file will not affect anything until you rerun ltconfig.
 #
-# Copyright (C) 1996-2000, 2001 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
@@ -55,6 +56,6 @@
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.4a
-TIMESTAMP=" (1.641.2.122 2000/09/30 05:27:52)"
+VERSION=1.4a-GCC3.0
+TIMESTAMP=" (1.641.2.256 2001/05/28 20:09:07 with GCC-local changes)"
 
 default_mode=
@@ -107,4 +108,5 @@
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
+taglist=
 
 # Parse our command line options once, thoroughly.
@@ -114,5 +116,5 @@
   shift
 
-  case "$arg" in
+  case $arg in
   -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
   *) optarg= ;;
@@ -121,7 +123,7 @@
   # If the previous option needs an argument, assign it.
   if test -n "$prev"; then
-    case "$prev" in
+    case $prev in
     execute_dlfiles)
-      eval "$prev=\"\$$prev \$arg\""
+      execute_dlfiles="$execute_dlfiles $arg"
       ;;
     tag)
@@ -129,5 +131,5 @@
 
       # Check whether tagname contains only valid characters
-      case "$tagname" in
+      case $tagname in
       *[!-_A-Za-z0-9,/]*)
 	echo "$progname: invalid tag name: $tagname" 1>&2
@@ -136,11 +138,20 @@
       esac
 
-      if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
-        taglist="$taglist $tagname"
-	# Evaluate the configuration.
-	eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
-      else
-	echo "$progname: ignoring unknown tag $tagname" 1>&2
-      fi
+      case $tagname in
+      CC)
+	# Don't test for the "default" C tag, as we know, it's there, but
+	# not specially marked.
+	taglist="$taglist $tagname"
+	;;
+      *)
+        if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
+          taglist="$taglist $tagname"
+	  # Evaluate the configuration.
+	  eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
+        else
+	  echo "$progname: ignoring unknown tag $tagname" 1>&2
+        fi
+        ;;
+      esac
       ;;
     *)
@@ -155,5 +166,5 @@
 
   # Have we seen a non-optional argument yet?
-  case "$arg" in
+  case $arg in
   --help)
     show_help=yes
@@ -238,14 +249,19 @@
 fi
 
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
 if test -z "$show_help"; then
 
   # Infer the operation mode.
   if test -z "$mode"; then
-    case "$nonopt" in
+    case $nonopt in
     *cc | *++ | gcc* | *-gcc*)
       mode=link
       for arg
       do
-	case "$arg" in
+	case $arg in
 	-c)
 	   mode=compile
@@ -292,5 +308,5 @@
 
   # These modes are in order of execution frequency so that they run quickly.
-  case "$mode" in
+  case $mode in
   # libtool compile mode
   compile)
@@ -306,5 +322,5 @@
     for arg
     do
-      case "$prev" in
+      case $prev in
       "") ;;
       xcompiler)
@@ -313,5 +329,5 @@
 	lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
 
-	case "$arg" in
+	case $arg in
 	# Double-quote args containing other shell metacharacters.
 	# Many Bourne shells cannot handle close brackets correctly
@@ -333,5 +349,5 @@
 
       # Accept any command-line options.
-      case "$arg" in
+      case $arg in
       -o)
 	if test "$user_target" != "no"; then
@@ -372,5 +388,5 @@
 	  # Many Bourne shells cannot handle close brackets correctly
 	  # in scan sets, so we specify it separately.
-	  case "$arg" in
+	  case $arg in
 	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	    arg="\"$arg\""
@@ -392,5 +408,5 @@
       esac
 
-      case "$user_target" in
+      case $user_target in
       next)
 	# The next one is the -o target name
@@ -420,5 +436,5 @@
       # Many Bourne shells cannot handle close brackets correctly
       # in scan sets, so we specify it separately.
-      case "$lastarg" in
+      case $lastarg in
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	lastarg="\"$lastarg\""
@@ -434,5 +450,5 @@
     done
 
-    case "$user_target" in
+    case $user_target in
     set)
       ;;
@@ -450,5 +466,5 @@
     # If the user specifies -o file.o, it is replaced with file.lo
     xform='[cCFSfmso]'
-    case "$libobj" in
+    case $libobj in
     *.ada) xform=ada ;;
     *.adb) xform=adb ;;
@@ -467,5 +483,5 @@
     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
 
-    case "$libobj" in
+    case $libobj in
     *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
     *)
@@ -545,5 +561,5 @@
 
     # On Cygwin there's no "real" PIC flag so we must build both object types
-    case "$host_os" in
+    case $host_os in
     cygwin* | mingw* | pw32* | os2*)
       pic_mode=default
@@ -778,5 +794,5 @@
   link | relink)
     modename="$modename: link"
-    case "$host" in
+    case $host in
     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
       # It is impossible to link a dll without this setting, and
@@ -844,5 +860,5 @@
     for arg
     do
-      case "$arg" in
+      case $arg in
       -all-static | -static)
 	if test "X$arg" = "X-all-static"; then
@@ -874,5 +890,5 @@
       base_compile="$base_compile $arg"
       shift
-      case "$arg" in
+      case $arg in
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
@@ -884,5 +900,5 @@
       # If the previous option needs an argument, assign it.
       if test -n "$prev"; then
-	case "$prev" in
+	case $prev in
 	output)
 	  compile_command="$compile_command @OUTPUT@"
@@ -891,5 +907,5 @@
 	esac
 
-	case "$prev" in
+	case $prev in
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
@@ -899,5 +915,5 @@
 	    preload=yes
 	  fi
-	  case "$arg" in
+	  case $arg in
 	  *.la | *.lo) ;;  # We handle these cases below.
 	  force)
@@ -951,7 +967,114 @@
 	  continue
 	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+            save_arg=$arg
+	    moreargs=
+	    for fil in `cat $save_arg`
+	    do
+#	      moreargs="$moreargs $fil"
+              arg=$fil
+              # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+                pic_object=
+                non_pic_object=
+
+                # Read the .lo file
+                # If there is no directory component, then add one.
+                case $arg in
+                */* | *\\*) . $arg ;;
+                *) . ./$arg ;;
+                esac
+
+                if test -z "$pic_object" || \
+                   test -z "$non_pic_object" ||
+                   test "$pic_object" = none && \
+                   test "$non_pic_object" = none; then
+                  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+                  exit 1
+                fi
+
+	        # Extract subdirectory from the argument.
+	        xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	        if test "X$xdir" = "X$arg"; then
+	          xdir=
+	        else
+	          xdir="$xdir/"
+	        fi
+
+                if test "$pic_object" != none; then
+                  # Prepend the subdirectory the object is found in.
+	          pic_object="$xdir$pic_object"
+
+	          if test "$prev" = dlfiles; then
+	            if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+	              dlfiles="$dlfiles $pic_object"
+	              prev=
+	              continue
+	            else
+	              # If libtool objects are unsupported, then we need to preload.
+	              prev=dlprefiles
+	            fi
+	          fi
+
+	          # CHECK ME:  I think I busted this.  -Ossama
+                  if test "$prev" = dlprefiles; then
+	            # Preload the old-style object.
+	            dlprefiles="$dlprefiles $pic_object"
+	            prev=
+                  fi
+
+                  # A PIC object.
+	          libobjs="$libobjs $pic_object"
+	          arg="$pic_object"
+                fi
+
+                # Non-PIC object.
+                if test "$non_pic_object" != none; then
+                  # Prepend the subdirectory the object is found in.
+	          non_pic_object="$xdir$non_pic_object"
+
+                  # A standard non-PIC object
+                  non_pic_objects="$non_pic_objects $non_pic_object"
+                  if test -z "$pic_object" || test "$pic_object" = none ; then
+                    arg="$non_pic_object"
+                  fi
+                fi
+              else
+                # Only an error if not doing a dry-run.
+                if test -z "$run"; then
+                  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+                  exit 1
+                else
+                  # Dry-run case.
+
+	          # Extract subdirectory from the argument.
+	          xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	          if test "X$xdir" = "X$arg"; then
+	            xdir=
+	          else
+	            xdir="$xdir/"
+	          fi
+
+                  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+                  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+	          libobjs="$libobjs $pic_object"
+                  non_pic_objects="$non_pic_objects $non_pic_object"
+                fi
+	      fi
+	    done
+	  else
+	    $echo "$modename: link input file \`$save_arg' does not exist"
+	    exit 1
+	  fi
+          arg=$save_arg
+	  prev=
+	  continue
+	  ;;
 	rpath | xrpath)
 	  # We need an absolute path.
-	  case "$arg" in
+	  case $arg in
 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
 	  *)
@@ -995,9 +1118,9 @@
 	  ;;
 	esac
-      fi
+      fi # test -n $prev
 
       prevarg="$arg"
 
-      case "$arg" in
+      case $arg in
       -all-static)
 	if test -n "$link_static_flag"; then
@@ -1036,5 +1159,5 @@
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: not more than one -exported-symbols argument allowed"
+	  $echo "$modename: more than one -exported-symbols argument is not allowed"
 	  exit 1
 	fi
@@ -1058,9 +1181,9 @@
 	continue
 	;;
-       
+
       -L*)
 	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
 	# We need an absolute path.
-	case "$dir" in
+	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
@@ -1080,7 +1203,7 @@
 	  ;;
 	esac
-	case "$host" in
+	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  case ":$dllsearchpath:" in
+	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
 	  *) dllsearchpath="$dllsearchpath:$dir";;
@@ -1092,16 +1215,13 @@
 
       -l*)
-	if test "$arg" = "-lc"; then
-	  case "$host" in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
-	    # These systems don't actually have c library (as such)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
+	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
-	  esac
-	elif test "$arg" = "-lm"; then
-	  case "$host" in
-	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
-	    # These systems don't actually have math library (as such)
-	    continue
+	  *-*-mingw* | *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  esac
@@ -1122,5 +1242,5 @@
 
       -no-install)
-	case "$host" in
+	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
 	  # The PATH hackery in wrapper scripts is required on Windows
@@ -1130,11 +1250,5 @@
 	  fast_install=no
 	  ;;
-	*-*-rhapsody*)
-	  # rhapsody is a little odd...
-	  deplibs="$deplibs -framework System"
-	  ;;
-	*)
-	  no_install=yes
-	  ;;
+	*) no_install=yes ;;
 	esac
 	continue
@@ -1146,4 +1260,9 @@
 	;;
 
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
       -o) prev=output ;;
 
@@ -1166,5 +1285,5 @@
 	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
 	# We need an absolute path.
-	case "$dir" in
+	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
@@ -1181,5 +1300,5 @@
 
       -static)
-        # The effects of -static are defined in a previous loop.
+	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
 	# didn't have a PIC flag, but the assumption that the effects
@@ -1205,5 +1324,5 @@
 	for flag in $args; do
 	  IFS="$save_ifs"
-	  case "$flag" in
+	  case $flag in
 	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	    flag="\"$flag\""
@@ -1223,5 +1342,5 @@
 	for flag in $args; do
 	  IFS="$save_ifs"
-	  case "$flag" in
+	  case $flag in
 	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	    flag="\"$flag\""
@@ -1251,5 +1370,5 @@
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case "$arg" in
+	case $arg in
 	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	  arg="\"$arg\""
@@ -1273,5 +1392,5 @@
           # Read the .lo file
           # If there is no directory component, then add one.
-          case "$arg" in
+          case $arg in
           */* | *\\*) . $arg ;;
           *) . ./$arg ;;
@@ -1385,5 +1504,5 @@
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case "$arg" in
+	case $arg in
 	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	  arg="\"$arg\""
@@ -1391,5 +1510,5 @@
 	esac
 	;;
-      esac
+      esac # arg
 
       # Now actually substitute the argument into the commands.
@@ -1398,5 +1517,5 @@
 	finalize_command="$finalize_command $arg"
       fi
-    done
+    done # argument parsing loop
 
     if test -n "$prev"; then
@@ -1456,5 +1575,4 @@
     fi
 
-    oldlibs=
     # calculate the name of the file, without its directory
     outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
@@ -1487,5 +1605,5 @@
 
     # Determine the type of output
-    case "$output" in
+    case $output in
     "")
       $echo "$modename: you must specify an output file" 1>&2
@@ -1512,4 +1630,16 @@
     if test $linkmode = lib; then
       libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      for pre_post_dep in $predeps $postdeps; do
+        case "$pre_post_deps " in
+	*" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+	esac
+	pre_post_deps="$pre_post_deps $pre_post_dep"
+      done
+      pre_post_deps=
     fi
 
@@ -1518,11 +1648,11 @@
     newlib_search_path=
     need_relink=no # whether we're linking any uninstalled libtool libraries
-    uninst_deplibs= # uninstalled libtool libraries
-    uninst_path= # paths that contain uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
     case $linkmode in
     lib)
 	passes="conv link"
 	for file in $dlfiles $dlprefiles; do
-	  case "$file" in
+	  case $file in
 	  *.la) ;;
 	  *)
@@ -1541,32 +1671,27 @@
 	passes="conv scan dlopen dlpreopen link"
 	;;
-    *)	passes="conv"
+    *)  passes="conv"
 	;;
     esac
     for pass in $passes; do
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
-	deplibs=
-      fi
       if test $linkmode = prog; then
+	# Determine which files to process
 	case $pass in
-	dlopen) libs="$dlfiles" ;;
+	dlopen)
+	  libs="$dlfiles"
+	  save_deplibs="$deplibs" # Collect dlpreopened libraries
+	  deplibs=
+	  ;;
 	dlpreopen) libs="$dlprefiles" ;;
 	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
       fi
-      if test $pass = dlopen; then
-	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
-	deplibs=
-      fi
       for deplib in $libs; do
 	lib=
 	found=no
-	case "$deplib" in
+	case $deplib in
 	-l*)
-	  if test $linkmode != lib && test $linkmode != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+	  if test $linkmode = oldlib && test $linkmode = obj; then
+	    $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
 	    continue
 	  fi
@@ -1585,4 +1710,5 @@
 	  done
 	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
 	    if test "$linkmode,$pass" = "prog,link"; then
 	      compile_deplibs="$deplib $compile_deplibs"
@@ -1594,5 +1720,5 @@
 	    continue
 	  fi
-	  ;;
+	  ;; # -l
 	-L*)
 	  case $linkmode in
@@ -1617,9 +1743,9 @@
 	    ;;
 	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+	    $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
 	    ;;
-	  esac
+	  esac # linkmode
 	  continue
-	  ;;
+	  ;; # -L
 	-R*)
 	  if test $pass = link; then
@@ -1665,19 +1791,15 @@
 	    continue
 	    ;;
-	  esac
-	  ;;
+	  esac # linkmode
+	  ;; # *.$libext
 	*.lo | *.$objext)
-	  if test $pass = conv; then
-	    deplibs="$deplib $deplibs"
-	  elif test $linkmode = prog; then
-	    if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	      # If there is no dlopen support or we're linking statically,
-	      # we need to preload.
-	      newdlprefiles="$newdlprefiles $deplib"
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      newdlfiles="$newdlfiles $deplib"
-	    fi
+	  if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	    # If there is no dlopen support or we're linking statically,
+	    # we need to preload.
+	    newdlprefiles="$newdlprefiles $deplib"
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    newdlfiles="$newdlfiles $deplib"
 	  fi
 	  continue
@@ -1687,5 +1809,5 @@
 	  continue
 	  ;;
-	esac
+	esac # case $deplib
 	if test $found = yes || test -f "$lib"; then :
 	else
@@ -1715,5 +1837,5 @@
 
 	# Read the .la file
-	case "$lib" in
+	case $lib in
 	*/* | *\\*) . $lib ;;
 	*) . ./$lib ;;
@@ -1722,5 +1844,6 @@
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test $linkmode != prog && test $linkmode != lib; }; then
+	   { test $linkmode = oldlib && test $linkmode = obj; }; then
+	   # Add dl[pre]opened files of deplib
 	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
 	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
@@ -1728,5 +1851,5 @@
 
 	if test $pass = conv; then
-	  # only check for convenience libraries
+	  # Only check for convenience libraries
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
@@ -1751,5 +1874,5 @@
 	  fi
 	  continue
-	fi
+	fi # $pass = conv
 
 	# Get the name of the library we link against.
@@ -1770,6 +1893,6 @@
 	  fi
 	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking statically,
-	    # we need to preload.
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.
 	    dlprefiles="$dlprefiles $lib"
 	  else
@@ -1777,8 +1900,8 @@
 	  fi
 	  continue
-	fi
+	fi # $pass = dlopen
 
 	# We need an absolute path.
-	case "$ladir" in
+	case $ladir in
 	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
 	*)
@@ -1808,6 +1931,6 @@
 	  absdir="$abs_ladir/$objdir"
 	  # Remove this search path later
-	  uninst_path="$uninst_path $abs_ladir"
-	fi
+	  notinst_path="$notinst_path $abs_ladir"
+	fi # $installed = yes
 	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
 
@@ -1828,8 +1951,8 @@
 	    newdlprefiles="$newdlprefiles $dir/$linklib"
 	  fi
-	fi
+	fi # $pass = dlpreopen
 
 	if test -z "$libdir"; then
-	  # link the convenience library
+	  # Link the convenience library
 	  if test $linkmode = lib; then
 	    deplibs="$dir/$old_library $deplibs"
@@ -1838,5 +1961,5 @@
 	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
 	  else
-	    deplibs="$lib $deplibs" # used for prog,scan pass
+	    deplibs="$lib $deplibs"
 	  fi
 	  continue
@@ -1855,5 +1978,5 @@
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
-	    case "$deplib" in
+	    case $deplib in
 	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
 	    esac
@@ -1870,64 +1993,15 @@
 	    esac
 	    tmp_libs="$tmp_libs $deplib"
-	  done
+	  done # for deplib
 	  continue
-	fi
-
-	if test "$linkmode,$pass" = "prog,link"; then
-	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var"; then
-	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
-	      *" $dir "*) ;;
-	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $dir" ;;
-	      esac
-	    fi
-
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-	fi
+	fi # $linkmode = prog...
 
 	link_static=no # Whether the deplib will be linked statically
 	if test -n "$library_names" &&
 	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
-	    uninst_deplibs="$uninst_deplibs $lib"
-	    need_relink=yes
-	  fi
-	  # This is a shared library
-	  if test $linkmode = lib &&
-	     test $hardcode_into_libs = yes; then
+	  # Link against this shared library
+
+	  if test "$linkmode,$pass" = "prog,link" ||
+	   { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
@@ -1951,4 +2025,28 @@
 	      ;;
 	    esac
+	    if test $linkmode = prog; then
+	      # We need to hardcode the library path
+	      if test -n "$shlibpath_var"; then
+		# Make sure the rpath contains only unique directories.
+		case "$temp_rpath " in
+		*" $dir "*) ;;
+		*" $absdir "*) ;;
+		*) temp_rpath="$temp_rpath $dir" ;;
+		esac
+	      fi
+	    fi
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+
+	  if test "$installed" = no; then
+	    notinst_deplibs="$notinst_deplibs $lib"
+	    need_relink=yes
 	  fi
 
@@ -1959,5 +2057,15 @@
 	    shift; shift
 	    libname=`eval \\$echo \"$libname_spec\"`
-	    if test -n "$soname_spec"; then
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin*)
+		major=`expr $current - $age`
+		versuffix="-$major"
+		;;
+	      esac
 	      eval soname=\"$soname_spec\"
 	    else
@@ -1966,4 +2074,6 @@
 
 	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    soname=`echo $soroot | sed -e 's/^.*\///'`
 	    newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
 
@@ -1997,5 +2107,5 @@
 	    dir=$output_objdir
 	    linklib=$newlib
-	  fi
+	  fi # test -n $old_archive_from_expsyms_cmds
 
 	  if test $linkmode = prog || test "$mode" != relink; then
@@ -2004,10 +2114,10 @@
 	    add=
 	    lib_linked=yes
-	    case "$hardcode_action" in
+	    case $hardcode_action in
 	    immediate | unsupported)
 	      if test "$hardcode_direct" = no; then
 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = no; then
-		case "$host" in
+		case $host in
 		*-*-sunos*) add_shlibpath="$dir" ;;
 		esac
@@ -2043,5 +2153,5 @@
 
 	    if test -n "$add_shlibpath"; then
-	      case ":$compile_shlibpath:" in
+	      case :$compile_shlibpath: in
 	      *":$add_shlibpath:"*) ;;
 	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
@@ -2057,5 +2167,5 @@
 		 test "$hardcode_minus_L" != yes && \
 		 test "$hardcode_shlibpath_var" = yes; then
-		case ":$finalize_shlibpath:" in
+		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
 		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
@@ -2076,5 +2186,5 @@
 	      add="-l$name"
 	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case ":$finalize_shlibpath:" in
+	      case :$finalize_shlibpath: in
 	      *":$libdir:"*) ;;
 	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
@@ -2096,4 +2206,13 @@
 	  fi
 	elif test $linkmode = prog; then
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+
+	  # Try to link the static library
 	  # Here we assume that one of hardcode_direct or hardcode_minus_L
 	  # is not unsupported.  This is valid on all known static and
@@ -2112,4 +2231,5 @@
 	    # We're trying link a shared library against a static one
 	    # but the system doesn't support it.
+
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
@@ -2119,4 +2239,21 @@
 	    echo "*** you link to this library.  But I can only do this if you have a"
 	    echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      echo "*** Therefore, libtool will create a static module, that should work "
+	      echo "*** as long as the dlopening application is linked with the -dlopen flag."
+	      if test -z "$global_symbol_pipe"; then
+	        echo
+	        echo "*** However, this would only work if libtool was able to extract symbol"
+	        echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	        echo "*** not find such a program.  So, this module is probably useless."
+	        echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+	        build_libtool_libs=module
+	        build_old_libs=yes
+	      else
+	        build_libtool_libs=no
+	      fi
+	    fi
 	  else
 	    convenience="$convenience $dir/$old_library"
@@ -2125,5 +2262,5 @@
 	    link_static=yes
 	  fi
-	fi
+	fi # link shared/static library?
 
 	if test $linkmode = lib; then
@@ -2134,5 +2271,5 @@
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
-	      case "$libdir" in
+	      case $libdir in
 	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
 		   case " $xrpath " in
@@ -2162,5 +2299,5 @@
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do
-	      case "$deplib" in
+	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)
@@ -2168,5 +2305,5 @@
 		test "X$dir" = "X$deplib" && dir="."
 		# We need an absolute path.
-		case "$dir" in
+		case $dir in
 		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
 		*)
@@ -2199,8 +2336,7 @@
 	      esac
 	    done
-	  fi
-	fi
-      done
-      dependency_libs="$newdependency_libs"
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
       if test $pass = dlpreopen; then
 	# Link the dlpreopened libraries before other libraries
@@ -2210,4 +2346,5 @@
       fi
       if test $pass != dlopen; then
+	test $pass != scan && dependency_libs="$newdependency_libs"
 	if test $pass != conv; then
 	  # Make sure lib_search_path contains only unique directories.
@@ -2228,10 +2365,9 @@
 	fi
 	for var in $vars dependency_libs; do
-	  # Make sure that $var contains only unique libraries
-	  # and add them in reverse order
+	  # Add libraries to $var in reverse order
 	  eval tmp_libs=\"\$$var\"
 	  new_libs=
 	  for deplib in $tmp_libs; do
-	    case "$deplib" in
+	    case $deplib in
 	    -L*) new_libs="$deplib $new_libs" ;;
 	    *)
@@ -2250,5 +2386,5 @@
 	  tmp_libs=
 	  for deplib in $new_libs; do
-	    case "$deplib" in
+	    case $deplib in
 	    -L*)
 	      case " $tmp_libs " in
@@ -2261,7 +2397,12 @@
 	  done
 	  eval $var=\"$tmp_libs\"
-	done
-      fi
-    done
+	done # for var
+      fi
+      if test "$pass" = "conv" &&
+       { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
+	libs="$deplibs" # reset libs
+	deplibs=
+      fi
+    done # for pass
     if test $linkmode = prog; then
       dlfiles="$newdlfiles"
@@ -2271,8 +2412,4 @@
     case $linkmode in
     oldlib)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
-
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
@@ -2307,5 +2444,5 @@
     lib)
       # Make sure we only generate libraries of the form `libNAME.la'.
-      case "$outputname" in
+      case $outputname in
       lib*)
 	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
@@ -2387,6 +2524,6 @@
 
 	# Check that each of the things are valid numbers.
-	case "$current" in
-	0 | [1-9] | [1-9][0-9]*) ;;
+	case $current in
+	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
 	*)
 	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
@@ -2396,6 +2533,6 @@
 	esac
 
-	case "$revision" in
-	0 | [1-9] | [1-9][0-9]*) ;;
+	case $revision in
+	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
 	*)
 	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
@@ -2405,6 +2542,6 @@
 	esac
 
-	case "$age" in
-	0 | [1-9] | [1-9][0-9]*) ;;
+	case $age in
+	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
 	*)
 	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
@@ -2424,6 +2561,26 @@
 	versuffix=
 	verstring=
-	case "$version_type" in
+	case $version_type in
 	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  minor_current=`expr $current + 1`
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
 
 	irix)
@@ -2469,14 +2626,4 @@
 	  major=".$current"
 	  versuffix=".$current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current";
 	  ;;
 
@@ -2532,5 +2679,5 @@
         tempremovelist=`echo "$output_objdir/*"`
 	for p in $tempremovelist; do
-          case "$p" in
+          case $p in
             *.$objext)
                ;;
@@ -2556,5 +2703,5 @@
 
       # Eliminate all temporary directories.
-      for path in $uninst_path; do
+      for path in $notinst_path; do
 	lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
 	deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
@@ -2599,13 +2746,20 @@
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
-	  case "$host" in
+	  case $host in
 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    deplibs="$deplibs -framework System"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
 	  *)
- 	    # Add libc to deplibs on all other systems if necessary.
- 	    if test $build_libtool_need_lc = "yes"; then
- 	      deplibs="$deplibs -lc"
- 	    fi
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test $build_libtool_need_lc = "yes"; then
+	      deplibs="$deplibs -lc"
+	    fi
 	    ;;
 	  esac
@@ -2626,5 +2780,5 @@
 	newdeplibs=
 	droppeddeps=no
-	case "$deplibs_check_method" in
+	case $deplibs_check_method in
 	pass_all)
 	  # Don't check for shared/static.  Everything works.
@@ -2651,5 +2805,5 @@
 	      name="`expr $i : '-l\(.*\)'`"
 	      # If $name is empty we are operating on a -L argument.
-	      if test "$name" != "" ; then
+	      if test -n "$name" && test "$name" != "0"; then
 		libname=`eval \\$echo \"$libname_spec\"`
 		deplib_matches=`eval \\$echo \"$library_names_spec\"`
@@ -2676,5 +2830,5 @@
 	      name="`expr $i : '-l\(.*\)'`"
 	     # If $name is empty we are operating on a -L argument.
-	      if test "$name" != "" ; then
+	      if test -n "$name" && test "$name" != "0"; then
 		$rm conftest
 		$LTCC -o conftest conftest.c $i
@@ -2716,5 +2870,5 @@
 	    name="`expr $a_deplib : '-l\(.*\)'`"
 	    # If $name is empty we are operating on a -L argument.
-	    if test "$name" != "" ; then
+	    if test -n "$name" && test "$name" != "0"; then
 	      libname=`eval \\$echo \"$libname_spec\"`
 	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
@@ -2734,5 +2888,5 @@
 		      while test -h "$potlib" 2>/dev/null; do
 			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
-			case "$potliblink" in
+			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
 			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
@@ -2747,4 +2901,38 @@
 		      fi
 		    done
+	      done
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		echo "*** Warning: This library needs some functionality provided by $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have."
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    # If $name is empty we are operating on a -L argument.
+	    if test -n "$name" && test "$name" != "0"; then
+	      libname=`eval \\$echo \"$libname_spec\"`
+	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		for potent_lib in $potential_libs; do
+		  if eval echo \"$potent_lib\" 2>/dev/null \
+		      | sed 10q \
+		      | egrep "$match_pattern_regex" > /dev/null; then
+		    newdeplibs="$newdeplibs $a_deplib"
+		    a_deplib=""
+		    break 2
+		  fi
+		done
 	      done
 	      if test -n "$a_deplib" ; then
@@ -2784,4 +2972,11 @@
 	name=$name_save
 
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library is the System framework
+	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  ;;
+	esac
+
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
@@ -2809,4 +3004,19 @@
 	    echo "*** automatically added whenever a program is linked with this library"
 	    echo "*** or is declared to -dlopen it."
+
+	    if test $allow_undefined = no; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
 	  fi
 	fi
@@ -2835,5 +3045,5 @@
 		else
 		  # Just accumulate the unique libdirs.
-		  case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		    ;;
@@ -2888,4 +3098,5 @@
 	  soname="$realname"
 	fi
+	test -z "$dlname" && dlname=$soname
 
 	lib="$output_objdir/$realname"
@@ -2944,4 +3155,5 @@
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	  else
@@ -2959,5 +3171,5 @@
 	    for xlib in $convenience; do
 	      # Extract the objects.
-	      case "$xlib" in
+	      case $xlib in
 	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
 	      *) xabs=`pwd`"/$xlib" ;;
@@ -2998,11 +3210,113 @@
 	  eval cmds=\"$archive_cmds\"
 	fi
-	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
+        if len=`expr "X$cmds" : ".*"` &&
+           test $len -le $max_cmd_len; then
+          :
+        else
+	  # The command line is too long to link in one step, link piecewise.
+          $echo "creating reloadable object files..."
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+          save_output=$output
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+          test_cmds=
+          concat_cmds=
+          objlist=
+          delfiles=
+          last_robj=
+          k=1
+          output=$output_objdir/$save_output-${k}.$objext
+	  # Loop over the list of objects to be linked.
+          for obj in $save_libobjs
+          do
+            eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+            if test "X$objlist" = X ||
+	       { len=`expr "X$test_cmds" : ".*"` &&
+                 test $len -le $max_cmd_len; }; then
+              objlist="$objlist $obj"
+            else
+	      # The command $test_cmds is almost too long, add a
+	      # command to the queue.
+              if test $k -eq 1 ; then
+	        # The first file doesn't have a previous command to add.
+                eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+              else
+	        # All subsequent reloadable object files will link in
+	        # the last one created.
+                eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+              fi
+              last_robj=$output_objdir/$save_output-${k}.$objext
+              k=`expr $k + 1`
+              output=$output_objdir/$save_output-${k}.$objext
+              objlist=$obj
+              len=1
+            fi
+          done
+	  # Handle the remaining objects by creating one last
+	  # reloadable object file.  All subsequent reloadable object
+	  # files will link in the last one created.
+	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+          eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+	  # Set up a command to remove the reloadale object files
+	  # after they are used.
+          i=0
+          while test $i -lt $k
+          do
+            i=`expr $i + 1`
+            delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+          done
+
+          $echo "creating a temporary reloadable object file: $output"
+
+	  # Loop through the commands generated above and execute them.
+          IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+          for cmd in $concat_cmds; do
+            IFS="$save_ifs"
+            $show "$cmd"
+            $run eval "$cmd" || exit $?
+          done
+          IFS="$save_ifs"
+
+          libobjs=$output
+	  # Restore the value of output.
+          output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+            eval cmds=\"$archive_expsym_cmds\"
+          else
+            eval cmds=\"$archive_cmds\"
+          fi
+
+	  # Append the command to remove the reloadable object files
+	  # to the just-reset $cmds.
+          eval cmds=\"\$cmds~$rm $delfiles\"
+        fi
+        IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+        for cmd in $cmds; do
+          IFS="$save_ifs"
+          $show "$cmd"
+          $run eval "$cmd" || exit $?
+        done
+        IFS="$save_ifs"
 
 	# Restore the uninstalled library and exit
@@ -3053,5 +3367,5 @@
       fi
 
-      case "$output" in
+      case $output in
       *.lo)
 	if test -n "$objs$old_deplibs"; then
@@ -3098,5 +3412,5 @@
 	  for xlib in $convenience; do
 	    # Extract the objects.
-	    case "$xlib" in
+	    case $xlib in
 	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
 	    *) xabs=`pwd`"/$xlib" ;;
@@ -3194,4 +3508,7 @@
 
     prog)
+      case $host in
+	*cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
+      esac
       if test -n "$vinfo"; then
 	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
@@ -3208,4 +3525,12 @@
 	fi
       fi
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	;;
+      esac
 
       compile_command="$compile_command $compile_deplibs"
@@ -3233,5 +3558,5 @@
 	    else
 	      # Just accumulate the unique libdirs.
-	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		;;
@@ -3251,7 +3576,7 @@
 	  esac
 	fi
-	case "$host" in
+	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  case ":$dllsearchpath:" in
+	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
 	  *) dllsearchpath="$dllsearchpath:$libdir";;
@@ -3277,5 +3602,5 @@
 	    else
 	      # Just accumulate the unique libdirs.
-	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		;;
@@ -3314,5 +3639,5 @@
 
       if test -n "$dlsyms"; then
-	case "$dlsyms" in
+	case $dlsyms in
 	"") ;;
 	*.c)
@@ -3445,5 +3770,5 @@
 
 	  pic_flag_for_symtable=
-	  case "$host" in
+	  case $host in
 	  # compiling the symbol table file with pic_flag works around
 	  # a FreeBSD bug that causes programs to crash when -lm is
@@ -3513,5 +3838,5 @@
 	rpath=
 	for dir in $temp_rpath; do
-	  case "$dir" in
+	  case $dir in
 	  [\\/]* | [A-Za-z]:[\\/]*)
 	    # Absolute path.
@@ -3621,5 +3946,5 @@
       # Quote $echo for shipping.
       if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-	case "$0" in
+	case $0 in
 	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
 	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
@@ -3636,4 +3961,9 @@
 	case $output in
 	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*) exeext=.exe ;;
+	  *) exeext= ;;
 	esac
 	$rm $output
@@ -3666,5 +3996,5 @@
 if test \"\$libtool_install_magic\" = \"$magic\"; then
   # install mode needs the following variable:
-  uninst_deplibs='$uninst_deplibs'
+  notinst_deplibs='$notinst_deplibs'
 else
   # When we are sourced in execute mode, \$file and \$echo are already set.
@@ -3715,5 +4045,5 @@
 	if test "$fast_install" = yes; then
 	  echo >> $output "\
-  program=lt-'$outputname'
+  program=lt-'$outputname'$exeext
   progdir=\"\$thisdir/$objdir\"
 
@@ -3734,6 +4064,7 @@
     # relink executable if necessary
     if test -n \"\$relink_command\"; then
-      if (eval \$relink_command); then :
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
       else
+        $echo \"\$relink_command_output\" >&2
 	$rm \"\$progdir/\$file\"
 	exit 1
@@ -3860,5 +4191,5 @@
 	for xlib in $addlibs; do
 	  # Extract the objects.
-	  case "$xlib" in
+	  case $xlib in
 	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
 	  *) xabs=`pwd`"/$xlib" ;;
@@ -3904,5 +4235,37 @@
 #	done
 
-	eval cmds=\"$old_archive_cmds\"
+        eval cmds=\"$old_archive_cmds\"
+
+        if len=`expr "X$cmds" : ".*"` &&
+             test $len -le $max_cmd_len; then
+          :
+        else
+          # the command line is too long to link in one step, link in parts
+          $echo "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+          objlist=
+          concat_cmds=
+          save_oldobjs=$oldobjs
+          for obj in $save_oldobjs
+          do
+            oldobjs="$objlist $obj"
+            objlist="$objlist $obj"
+            eval test_cmds=\"$old_archive_cmds\"
+            if len=`expr "X$test_cmds" : ".*"` &&
+               test $len -le $max_cmd_len; then
+              :
+            else
+              # the above command should be used before it gets too long
+              oldobjs=$objlist
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+              objlist=
+            fi
+          done
+	  RANLIB=$save_RANLIB
+          oldobjs=$objlist
+          eval cmds=\"\$concat_cmds~$old_archive_cmds\"
+        fi
       fi
       IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
@@ -3921,5 +4284,5 @@
 
     # Now create the libtool archive.
-    case "$output" in
+    case $output in
     *.la)
       old_library=
@@ -3939,5 +4302,9 @@
       done
       # Quote the link command for shipping.
-      relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
+      tagopts=
+      for tag in $taglist; do
+        tagopts="$tagopts --tag $tag"
+      done
+      relink_command="(cd `pwd`; $SHELL $0$tagopts --mode=relink $libtool_args)"
       relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
 
@@ -3953,5 +4320,5 @@
 	    newdependency_libs=
 	    for deplib in $dependency_libs; do
-	      case "$deplib" in
+	      case $deplib in
 	      *.la)
 		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
@@ -3991,4 +4358,9 @@
 	  fi
 	  $rm $output
+	  # place dlname in correct position for cygwin
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	  esac
 	  $echo > $output "\
 # $outputname - a libtool library file
@@ -3999,5 +4371,5 @@
 
 # The name that we can dlopen(3).
-dlname='$dlname'
+dlname='$tdlname'
 
 # Names of this library.
@@ -4051,5 +4423,5 @@
       # Aesthetically quote it.
       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case "$arg" in
+      case $arg in
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
 	arg="\"$arg\""
@@ -4067,5 +4439,5 @@
     # Aesthetically quote it.
     arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case "$arg" in
+    case $arg in
     *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
       arg="\"$arg\""
@@ -4090,5 +4462,5 @@
       fi
 
-      case "$arg" in
+      case $arg in
       -d) isdir=yes ;;
       -f) prev="-f" ;;
@@ -4115,5 +4487,5 @@
       # Aesthetically quote the argument.
       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case "$arg" in
+      case $arg in
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
 	arg="\"$arg\""
@@ -4166,9 +4538,9 @@
       fi
     fi
-    case "$destdir" in
+    case $destdir in
     [\\/]* | [A-Za-z]:[\\/]*) ;;
     *)
       for file in $files; do
-	case "$file" in
+	case $file in
 	*.lo) ;;
 	*)
@@ -4192,5 +4564,5 @@
 
       # Do each installation.
-      case "$file" in
+      case $file in
       *.$libext)
 	# Do the static libraries later.
@@ -4211,5 +4583,5 @@
 	relink_command=
 	# If there is no directory component, then add one.
-	case "$file" in
+	case $file in
 	*/* | *\\*) . $file ;;
 	*) . ./$file ;;
@@ -4240,5 +4612,5 @@
 	  else
 	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    continue
+	    exit 1
 	  fi
 	fi
@@ -4307,5 +4679,5 @@
 
 	# Deduce the name of the destination old-style object file.
-	case "$destfile" in
+	case $destfile in
 	*.lo)
 	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
@@ -4350,9 +4722,9 @@
 	# Do a test to see if this is really a libtool program.
 	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  uninst_deplibs=
+	  notinst_deplibs=
 	  relink_command=
 
 	  # If there is no directory component, then add one.
-	  case "$file" in
+	  case $file in
 	  */* | *\\*) . $file ;;
 	  *) . ./$file ;;
@@ -4360,5 +4732,5 @@
 
 	  # Check the variables that should have been set.
-	  if test -z "$uninst_deplibs"; then
+	  if test -z "$notinst_deplibs"; then
 	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
 	    exit 1
@@ -4366,10 +4738,10 @@
 
 	  finalize=yes
-	  for lib in $uninst_deplibs; do
+	  for lib in $notinst_deplibs; do
 	    # Check to see that each library is installed.
 	    libdir=
 	    if test -f "$lib"; then
 	      # If there is no directory component, then add one.
-	      case "$lib" in
+	      case $lib in
 	      */* | *\\*) . $lib ;;
 	      *) . ./$lib ;;
@@ -4385,5 +4757,5 @@
 	  relink_command=
 	  # If there is no directory component, then add one.
-	  case "$file" in
+	  case $file in
 	  */* | *\\*) . $file ;;
 	  *) . ./$file ;;
@@ -4423,4 +4795,23 @@
 	fi
 
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyways
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    destfile=`echo $destfile | sed -e 's,.exe$,,'`
+	    ;;
+	  esac
+	  ;;
+	esac
+
 	$show "$install_prog$stripme $file $destfile"
 	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
@@ -4462,9 +4853,8 @@
       # Maybe just do a dry run.
       test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec $SHELL $0 --finish$current_libdirs
-      exit 1
+      exec_cmd='$SHELL $0 --finish$current_libdirs'
+    else
+      exit 0
     fi
-
-    exit 0
     ;;
 
@@ -4504,5 +4894,5 @@
 
     # Exit here if they wanted silent mode.
-    test "$show" = : && exit 0
+    test "$show" = ":" && exit 0
 
     echo "----------------------------------------------------------------------"
@@ -4514,5 +4904,5 @@
     echo "If you ever happen to want to link against installed libraries"
     echo "in a given directory, LIBDIR, you must either use libtool, and"
-    echo "specify the full pathname of the library, or use \`-LLIBDIR'"
+    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
     echo "flag during linking and do at least one of the following:"
     if test -n "$shlibpath_var"; then
@@ -4564,5 +4954,5 @@
 
       dir=
-      case "$file" in
+      case $file in
       *.la)
 	# Check to see that this really is a libtool archive.
@@ -4579,5 +4969,5 @@
 
 	# If there is no directory component, then add one.
-	case "$file" in
+	case $file in
 	*/* | *\\*) . $file ;;
 	*) . ./$file ;;
@@ -4634,5 +5024,5 @@
     for file
     do
-      case "$file" in
+      case $file in
       -*) ;;
       *)
@@ -4640,5 +5030,5 @@
 	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
 	  # If there is no directory component, then add one.
-	  case "$file" in
+	  case $file in
 	  */* | *\\*) . $file ;;
 	  *) . ./$file ;;
@@ -4669,9 +5059,6 @@
       fi
 
-      # Now actually exec the command.
-      eval "exec \$cmd$args"
-
-      $echo "$modename: cannot exec \$cmd$args"
-      exit 1
+      # Now prepare to actually exec the command.
+      exec_cmd='"$cmd"$args'
     else
       # Display what would be done.
@@ -4690,4 +5077,6 @@
     rm="$nonopt"
     files=
+    rmforce=
+    exit_status=0
 
     # This variable tells wrapper scripts just to set variables rather
@@ -4697,5 +5086,6 @@
     for arg
     do
-      case "$arg" in
+      case $arg in
+      -f) rm="$rm $arg"; rmforce=yes ;;
       -*) rm="$rm $arg" ;;
       *) files="$files $arg" ;;
@@ -4708,4 +5098,6 @@
       exit 1
     fi
+
+    rmdirs=
 
     for file in $files; do
@@ -4720,7 +5112,27 @@
       test $mode = uninstall && objdir="$dir"
 
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test $mode = clean; then
+	case " $rmdirs " in
+	  *" $objdir "*) ;;
+	  *) rmdirs="$rmdirs $objdir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if (test -L "$file") >/dev/null 2>&1 \
+        || (test -h "$file") >/dev/null 2>&1 \
+	|| test -f "$file"; then
+        :
+      elif test -d "$file"; then
+        exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+        continue
+      fi
+
       rmfiles="$file"
 
-      case "$name" in
+      case $name in
       *.la)
 	# Possibly a libtool archive, so verify it.
@@ -4744,4 +5156,7 @@
 		$show "$cmd"
 		$run eval "$cmd"
+		if test $? != 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
 	      done
 	      IFS="$save_ifs"
@@ -4756,4 +5171,7 @@
 		$show "$cmd"
 		$run eval "$cmd"
+		if test $? != 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
 	      done
 	      IFS="$save_ifs"
@@ -4766,8 +5184,8 @@
       *.lo)
 	# Possibly a libtool object, so verify it.
-	if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
 
           # Read the .lo file
-          . ./$file
+          . $dir/$name
 
 	  # Add PIC object to the list of files to remove.
@@ -4800,7 +5218,16 @@
       esac
       $show "$rm $rmfiles"
-      $run $rm $rmfiles
+      $run $rm $rmfiles || exit_status=1
     done
-    exit 0
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	$show "rmdir $dir"
+	$run rmdir $dir >/dev/null 2>&1
+      fi
+    done
+
+    exit $exit_status
     ;;
 
@@ -4812,11 +5239,18 @@
   esac
 
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$generic_help" 1>&2
+  if test -z "$exec_cmd"; then
+    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+    $echo "$generic_help" 1>&2
+    exit 1
+  fi
+fi # test -z "$show_help"
+
+if test -n "$exec_cmd"; then
+  eval exec $exec_cmd
   exit 1
-fi # test -z "$show_help"
+fi
 
 # We need to display help for each of the modes.
-case "$mode" in
+case $mode in
 "") $echo \
 "Usage: $modename [OPTION]... [MODE-ARG]...
@@ -4874,4 +5308,6 @@
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
   -static           always build a \`.o' file suitable for static linking
 
@@ -4957,4 +5393,5 @@
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
   -release RELEASE  specify package release information
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
