source: vendor/perl/5.8.8/NetWare/t/NWScripts.pl

print "\nGenerating automated scripts for NetWare...\n\n\n";


use File::Basename;
use File::Copy;

chdir '/perl/scripts/';
$DirName = "t";

# These scripts have problems (either abend or hang) as of now (11 May 2001).
# So, they are commented out in the corresponding auto scripts, io.pl and lib.pl
@ScriptsNotUsed = ("t/io/openpid.t", "t/lib/filehandle.t", "t/lib/memoize/t/expire_module_t.t", "t/lib/NEXT/t/next.t", "t/lib/Math/BigInt/t/require.t", "t/ext/B/t/debug.t", "t/lib/IPC/Open3.t", "t/ext/B/t/showlex.t", "t/op/subst_wamp.t", "t/uni/upper.t", "t/lib/Net/t/ftp.t", "t/op/sort.t", "t/ext/POSIX/t/posix.t", "t/lib/CPAN/t/loadme.t", "t/lib/CPAN/t/vcmp.t");

opendir(DIR, $DirName);
@Dirs = readdir(DIR);
close(DIR);
foreach $DirItem(@Dirs)
{
        $DirItem1 = $DirName."/".$DirItem;
        push @DirNames, $DirItem1;      # All items under  $DirName  folder is copied into an array.

        if(-d $DirItem1)
        {       # If an item is a folder, then open it further.

                # Intemediary automated script like base.pl, lib.pl, cmd.pl etc.
                $IntAutoScript = "t/".$DirItem.".pl";

                # Open once in write mode since later files are opened in append mode,
                # and if there already exists a file with the same name, all further opens
                # will append to that file!!
                open(FHW, "> $IntAutoScript") or die "Unable to open the file,  $IntAutoScript  for writing.\n";
                seek(FHW, 0, 0);        # seek to the beginning of the file.
                close FHW;                      # close the file.
        }
}


print "Generating  t/nwauto.pl ...\n\n\n";

open(FHWA, "> t/nwauto.pl") or die "Unable to open the file,  t/nwauto.pl  for writing.\n";
seek(FHWA, 0, 0);       # seek to the beginning of the file.

$version = sprintf("%vd",$^V);
print FHWA "\n\nprint \"Automated Unit Testing of Perl$version for NetWare\\n\\n\\n\"\;\n\n\n";


foreach $FileName(@DirNames)
{
        $index = 0;
        if(-d $FileName)
        {       # If an item is a folder, then open it further.

                $dir = dirname($FileName);              # Get the folder name

                foreach $DirItem1(@Dirs)
                {
                        $DirItem2 = $DirItem1;
                        if($FileName =~ m/$DirItem2/)
                        {
                                $DirItem = $DirItem1;

                                # Intemediary automated script like base.pl, lib.pl, cmd.pl etc.
                                $IntAutoScript = "t/".$DirItem.".pl";
                        }
                }

                # Write into the intermediary auto script.
                open(FHW, ">> $IntAutoScript") or die "Unable to open the file,  $IntAutoScript  for appending.\n";
                seek(FHW, 0, 2);        # seek to the end of the file.

                $pos = tell(FHW);
                if($pos <= 0)
                {
                        print "Generating  $IntAutoScript...\n";
                        print FHW "\n\nprint \"Testing  $DirItem  folder:\\n\\n\\n\"\;\n\n\n";
                }

                opendir(SUBDIR, $FileName);
                @SubDirs = readdir(SUBDIR);
                close(SUBDIR);
                foreach $SubFileName(@SubDirs)
                {
                        $SubFileName = $FileName."/".$SubFileName;
                        if(-d $SubFileName)
                        {
                                push @DirNames, $SubFileName;   # If sub-folder, push it into the array.
                        }
                        else
                        {
                                &Process_File($SubFileName);    # If file, process it.
                        }

                        $index++;
                }

                close FHW;                      # close the file.

                if($index <= 0)
                {
                        # The folder is empty and delete the corresponding '.pl' file.
                        unlink($IntAutoScript);
                        print "Deleted  $IntAutoScript  since it corresponded to an empty folder.\n";
                }
                else
                {
                        if($pos <= 0)
                        {       # This logic to make sure that it is written only once.
                                # Only if something is written into the intermediary auto script,
                                # only then make an entry of the intermediary auto script in  nwauto.pl
                                print FHWA "print \`perl $IntAutoScript\`\;\n";
                                print FHWA "print \"\\n\\n\\n\"\;\n\n";
                        }
                }
        }
        else
        {
                if(-f $FileName)
                {
                        $dir = dirname($FileName);              # Get the folder name
                        $base = basename($FileName);    # Get the base name
                        ($base, $dir, $ext) = fileparse($FileName, '\..*');     # Get the extension of the file passed.
                        
                        # Do the processing only if the file has '.t' extension.
                        if($ext eq '.t')
                        {
                                print FHWA "print \`perl $FileName\`\;\n";
                                print FHWA "print \"\\n\\n\\n\"\;\n\n";
                        }
                }
        }
}


## Below adds the ending comments into all the intermediary auto scripts:

opendir(DIR, $DirName);
@Dirs = readdir(DIR);
close(DIR);
foreach $DirItem(@Dirs)
{
        $index = 0;

        $FileName = $DirName."/".$DirItem;
        if(-d $FileName)
        {       # If an item is a folder, then open it further.

                opendir(SUBDIR, $FileName);
                @SubDirs = readdir(SUBDIR);
                close(SUBDIR);

                # To not to write into the file if the corresponding folder was empty.
                foreach $SubDir(@SubDirs)
                {
                        $index++;
                }

                if($index > 0)
                {
                        # The folder not empty.

                        # Intemediary automated script like base.pl, lib.pl, cmd.pl etc.
                        $IntAutoScript = "t/".$DirItem.".pl";

                        # Write into the intermediary auto script.
                        open(FHW, ">> $IntAutoScript") or die "Unable to open the file,  $IntAutoScript  for appending.\n";
                        seek(FHW, 0, 2);        # seek to the end of the file.

                        # Write into the intermediary auto script.
                        print FHW "\nprint \"Testing of  $DirItem  folder done!\\n\\n\"\;\n\n";

                        close FHW;                      # close the file.
                }
        }
}


# Write into  nwauto.pl
print FHWA "\nprint \"Automated Unit Testing of Perl$version for NetWare done!\\n\\n\"\;\n\n";

close FHWA;                     # close the file.

print "\n\nGeneration of  t/nwauto.pl  Done!\n\n";

print "\nGeneration of automated scripts for NetWare DONE!\n";




# Process the file.
sub Process_File
{
        local($FileToProcess) = @_;             # File name.
        local($Script) = 0;
        local($HeadCut) = 0;

        ## For example:
        ## If the value of $FileToProcess is '/perl/scripts/t/pragma/warnings.t', then
                ## $dir1 = '/perl/scripts/t/pragma/'
                ## $base1 = 'warnings'
                ## $ext1 = '.t'
        $dir1 = dirname($FileToProcess);        # Get the folder name
        $base1 = basename($FileToProcess);      # Get the base name
        ($base1, $dir1, $ext1) = fileparse($FileToProcess, '\..*');     # Get the extension of the file passed.

        # Do the processing only if the file has '.t' extension.
        if($ext1 eq '.t')
        {
                foreach $Script(@ScriptsNotUsed)
                {
                        # The variables are converted to lower case before they are compared.
                        # This is done to remove the case-sensitive comparison done by 'eq'.
                        $Script1 = lc($Script);
                        $FileToProcess1 = lc($FileToProcess);
                        if($Script1 eq $FileToProcess1)
                        {
                                $HeadCut = 1;
                        }
                }

                if($HeadCut)
                {
                        # Write into the intermediary auto script.
                        print FHW "=head\n";
                }

                # Write into the intermediary auto script.
                print FHW "print \"Testing  $base1"."$ext1:\\n\\n\"\;\n";
                print FHW "print \`perl $FileToProcess\`\;\n";  # Write the changed array into the file.
                print FHW "print \"\\n\\n\\n\"\;\n";

                if($HeadCut)
                {
                        # Write into the intermediary auto script.
                        print FHW "=cut\n";
                }

                $HeadCut = 0;
                print FHW "\n";
        }
}