source: trunk/src/binutils/bfd/coff-w65.c@ 294

Last change on this file since 294 was 10, checked in by bird, 23 years ago

Initial revision
  • Property cvs2svn:cvs-rev set to 1.1
  • Property svn:eol-style set to native
  • Property svn:executable set to *
File size: 11.0 KB
Line 
1/* BFD back-end for WDC 65816 COFF binaries.
2 Copyright 1995, 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
3 Written by Steve Chamberlain, <sac@cygnus.com>.
4
5This file is part of BFD, the Binary File Descriptor library.
6
7This program is free software; you can redistribute it and/or modify
8it under the terms of the GNU General Public License as published by
9the Free Software Foundation; either version 2 of the License, or
10(at your option) any later version.
11
12This program is distributed in the hope that it will be useful,
13but WITHOUT ANY WARRANTY; without even the implied warranty of
14MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15GNU General Public License for more details.
16
17You should have received a copy of the GNU General Public License
18along with this program; if not, write to the Free Software
19Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
20
21#include "bfd.h"
22#include "sysdep.h"
23#include "libbfd.h"
24#include "bfdlink.h"
25#include "coff/w65.h"
26#include "coff/internal.h"
27#include "libcoff.h"
28
29#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
30static reloc_howto_type howto_table[] =
31{
32 HOWTO (R_W65_ABS8, 0, 0, 8, false, 0, complain_overflow_bitfield, 0, "abs8", true, 0x000000ff, 0x000000ff, false),
33 HOWTO (R_W65_ABS16, 1, 0, 16, false, 0, complain_overflow_bitfield, 0, "abs16", true, 0x0000ffff, 0x0000ffff, false),
34 HOWTO (R_W65_ABS24, 0, 2, 32, false, 0, complain_overflow_bitfield, 0, "abs24", true, 0x00ffffff, 0x00ffffff, false),
35 HOWTO (R_W65_ABS8S8, 0, 0, 8, false, 0, complain_overflow_bitfield, 0, ">abs8", true, 0x000000ff, 0x000000ff, false),
36 HOWTO (R_W65_ABS8S16, 0, 0, 8, false, 0, complain_overflow_bitfield, 0, "^abs8", true, 0x000000ff, 0x000000ff, false),
37 HOWTO (R_W65_ABS16S8, 1, 0, 16, false, 0, complain_overflow_bitfield, 0, ">abs16", true, 0x0000ffff, 0x0000ffff, false),
38 HOWTO (R_W65_ABS16S16,1, 0, 16, false, 0, complain_overflow_bitfield, 0, "^abs16", true, 0x0000ffff, 0x0000ffff, false),
39 HOWTO (R_W65_PCR8, 0, 0, 8, false, 0, complain_overflow_bitfield, 0, "pcrel8", true, 0x000000ff, 0x000000ff, true),
40 HOWTO (R_W65_PCR16, 1, 0, 16, false, 0, complain_overflow_bitfield, 0, "pcrel16", true, 0x0000ffff, 0x0000ffff, true),
41 HOWTO (R_W65_DP, 0, 0, 8, false, 0, complain_overflow_bitfield, 0, "dp", true, 0x000000ff, 0x000000ff, false),
42
43};
44
45/* Turn a howto into a reloc number */
46
47#define SELECT_RELOC(x,howto) \
48 { x.r_type = select_reloc(howto); }
49
50#define BADMAG(x) (W65BADMAG(x))
51#define W65 1 /* Customize coffcode.h */
52#define __A_MAGIC_SET__
53
54/* Code to swap in the reloc */
55#define SWAP_IN_RELOC_OFFSET bfd_h_get_32
56#define SWAP_OUT_RELOC_OFFSET bfd_h_put_32
57#define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
58 dst->r_stuff[0] = 'S'; \
59 dst->r_stuff[1] = 'C';
60
61static int
62select_reloc (howto)
63 reloc_howto_type *howto;
64{
65 return howto->type ;
66}
67
68/* Code to turn a r_type into a howto ptr, uses the above howto table
69 */
70
71static void
72rtype2howto (internal, dst)
73 arelent *internal;
74 struct internal_reloc *dst;
75{
76 internal->howto = howto_table + dst->r_type - 1;
77}
78
79#define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
80
81/* Perform any necessary magic to the addend in a reloc entry */
82
83#define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
84 cache_ptr->addend = ext_reloc.r_offset;
85
86#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
87 reloc_processing(relent, reloc, symbols, abfd, section)
88
89static void
90reloc_processing (relent, reloc, symbols, abfd, section)
91 arelent * relent;
92 struct internal_reloc *reloc;
93 asymbol ** symbols;
94 bfd * abfd;
95 asection * section;
96{
97 relent->address = reloc->r_vaddr;
98 rtype2howto (relent, reloc);
99
100 if (((int) reloc->r_symndx) > 0)
101 {
102 relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
103 }
104 else
105 {
106 relent->sym_ptr_ptr = (asymbol **)&(bfd_abs_symbol);
107 }
108
109 relent->addend = reloc->r_offset;
110
111 relent->address -= section->vma;
112 /* relent->section = 0;*/
113}
114
115static int
116h8300_reloc16_estimate(abfd, input_section, reloc, shrink, link_info)
117 bfd *abfd;
118 asection *input_section;
119 arelent *reloc;
120 unsigned int shrink;
121 struct bfd_link_info *link_info;
122{
123 bfd_vma value;
124 bfd_vma dot;
125 bfd_vma gap;
126
127 /* The address of the thing to be relocated will have moved back by
128 the size of the shrink - but we don't change reloc->address here,
129 since we need it to know where the relocation lives in the source
130 uncooked section */
131
132 /* reloc->address -= shrink; conceptual */
133
134 bfd_vma address = reloc->address - shrink;
135
136 switch (reloc->howto->type)
137 {
138 case R_MOV16B2:
139 case R_JMP2:
140 shrink+=2;
141 break;
142
143 /* Thing is a move one byte */
144 case R_MOV16B1:
145 value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
146
147 if (value >= 0xff00)
148 {
149
150 /* Change the reloc type from 16bit, possible 8 to 8bit
151 possible 16 */
152 reloc->howto = reloc->howto + 1;
153 /* The place to relc moves back by one */
154 /* This will be two bytes smaller in the long run */
155 shrink +=2 ;
156 bfd_perform_slip(abfd, 2, input_section, address);
157 }
158
159 break;
160 /* This is the 24 bit branch which could become an 8 bitter,
161 the relocation points to the first byte of the insn, not the
162 actual data */
163
164 case R_JMPL1:
165 value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
166
167 dot = input_section->output_section->vma +
168 input_section->output_offset + address;
169
170 /* See if the address we're looking at within 127 bytes of where
171 we are, if so then we can use a small branch rather than the
172 jump we were going to */
173
174 gap = value - dot ;
175
176 if (-120 < (long)gap && (long)gap < 120 )
177 {
178
179 /* Change the reloc type from 24bit, possible 8 to 8bit
180 possible 32 */
181 reloc->howto = reloc->howto + 1;
182 /* This will be two bytes smaller in the long run */
183 shrink +=2 ;
184 bfd_perform_slip(abfd, 2, input_section, address);
185 }
186 break;
187
188 case R_JMP1:
189
190 value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
191
192 dot = input_section->output_section->vma +
193 input_section->output_offset + address;
194
195 /* See if the address we're looking at within 127 bytes of where
196 we are, if so then we can use a small branch rather than the
197 jump we were going to */
198
199 gap = value - (dot - shrink);
200
201 if (-120 < (long)gap && (long)gap < 120 )
202 {
203
204 /* Change the reloc type from 16bit, possible 8 to 8bit
205 possible 16 */
206 reloc->howto = reloc->howto + 1;
207 /* The place to relc moves back by one */
208
209 /* This will be two bytes smaller in the long run */
210 shrink +=2 ;
211 bfd_perform_slip(abfd, 2, input_section, address);
212 }
213 break;
214 }
215
216 return shrink;
217}
218
219/* First phase of a relaxing link */
220
221/* Reloc types
222 large small
223 R_MOV16B1 R_MOV16B2 mov.b with 16bit or 8 bit address
224 R_JMP1 R_JMP2 jmp or pcrel branch
225 R_JMPL1 R_JMPL_B8 24jmp or pcrel branch
226 R_MOV24B1 R_MOV24B2 24 or 8 bit reloc for mov.b
227
228*/
229
230static void
231h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
232 dst_ptr)
233 bfd *abfd;
234 struct bfd_link_info *link_info;
235 struct bfd_link_order *link_order;
236 arelent *reloc;
237 bfd_byte *data;
238 unsigned int *src_ptr;
239 unsigned int *dst_ptr;
240{
241 unsigned int src_address = *src_ptr;
242 unsigned int dst_address = *dst_ptr;
243 asection *input_section = link_order->u.indirect.section;
244
245 switch (reloc->howto->type)
246 {
247 case R_W65_ABS8:
248 case R_W65_DP:
249 {
250 unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
251 input_section);
252 bfd_put_8 (abfd, gap, data + dst_address);
253 dst_address += 1;
254 src_address += 1;
255 }
256 break;
257
258 case R_W65_ABS8S8:
259 {
260 unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
261 input_section);
262 gap >>= 8;
263 bfd_put_8 (abfd, gap, data + dst_address);
264 dst_address += 1;
265 src_address += 1;
266 }
267 break;
268
269 case R_W65_ABS8S16:
270 {
271 unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
272 input_section);
273 gap >>=16;
274 bfd_put_8 (abfd, gap, data + dst_address);
275 dst_address += 1;
276 src_address += 1;
277 }
278 break;
279
280 case R_W65_ABS16:
281 {
282 unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
283 input_section);
284
285 bfd_put_16 (abfd, gap, data + dst_address);
286 dst_address += 2;
287 src_address += 2;
288 }
289 break;
290 case R_W65_ABS16S8:
291 {
292 unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
293 input_section);
294 gap >>= 8;
295 bfd_put_16 (abfd, gap, data + dst_address);
296 dst_address += 2;
297 src_address += 2;
298 }
299 break;
300 case R_W65_ABS16S16:
301 {
302 unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
303 input_section);
304 gap >>= 16;
305 bfd_put_16 (abfd, gap, data + dst_address);
306 dst_address += 2;
307 src_address += 2;
308 }
309 break;
310
311 case R_W65_ABS24:
312 {
313 unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
314 input_section);
315 bfd_put_16 (abfd, gap, data + dst_address);
316 bfd_put_8 (abfd, gap>>16, data+dst_address+2);
317 dst_address += 3;
318 src_address += 3;
319 }
320 break;
321
322 case R_W65_PCR8:
323 {
324 int gap = bfd_coff_reloc16_get_value (reloc, link_info,
325 input_section);
326 bfd_vma dot = link_order->offset
327 + dst_address
328 + link_order->u.indirect.section->output_section->vma;
329
330 gap -= dot + 1;
331 if (gap < -128 || gap > 127) {
332 if (! ((*link_info->callbacks->reloc_overflow)
333 (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
334 reloc->howto->name, reloc->addend, input_section->owner,
335 input_section, reloc->address)))
336 abort ();
337 }
338 bfd_put_8 (abfd, gap, data + dst_address);
339 dst_address += 1;
340 src_address += 1;
341 }
342 break;
343
344 case R_W65_PCR16:
345 {
346 bfd_vma gap = bfd_coff_reloc16_get_value (reloc, link_info,
347 input_section);
348 bfd_vma dot = link_order->offset
349 + dst_address
350 + link_order->u.indirect.section->output_section->vma;
351
352 /* This wraps within the page, so ignore the relativeness, look at the
353 high part */
354 if ((gap & 0xf0000) != (dot & 0xf0000)) {
355 if (! ((*link_info->callbacks->reloc_overflow)
356 (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
357 reloc->howto->name, reloc->addend, input_section->owner,
358 input_section, reloc->address)))
359 abort ();
360 }
361
362 gap -= dot + 2;
363 bfd_put_16 (abfd, gap, data + dst_address);
364 dst_address += 2;
365 src_address += 2;
366 }
367 break;
368 default:
369 printf (_("ignoring reloc %s\n"), reloc->howto->name);
370 break;
371
372 }
373 *src_ptr = src_address;
374 *dst_ptr = dst_address;
375
376}
377
378#define coff_reloc16_extra_cases h8300_reloc16_extra_cases
379#define coff_reloc16_estimate h8300_reloc16_estimate
380
381#include "coffcode.h"
382
383#undef coff_bfd_get_relocated_section_contents
384#undef coff_bfd_relax_section
385#define coff_bfd_get_relocated_section_contents \
386 bfd_coff_reloc16_get_relocated_section_contents
387#define coff_bfd_relax_section bfd_coff_reloc16_relax_section
388
389CREATE_LITTLE_COFF_TARGET_VEC (w65_vec, "coff-w65", BFD_IS_RELAXABLE, 0, '_', NULL)
Note: See TracBrowser for help on using the repository browser.