source: trunk/ncurses/tack/init.c@ 2840

Last change on this file since 2840 was 2621, checked in by bird, 20 years ago

GNU ncurses 5.5
File size: 7.1 KB
Line 
1/*
2** Copyright (C) 1991, 1997 Free Software Foundation, Inc.
3**
4** This file is part of TACK.
5**
6** TACK is free software; you can redistribute it and/or modify
7** it under the terms of the GNU General Public License as published by
8** the Free Software Foundation; either version 2, or (at your option)
9** any later version.
10**
11** TACK is distributed in the hope that it will be useful,
12** but WITHOUT ANY WARRANTY; without even the implied warranty of
13** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14** GNU General Public License for more details.
15**
16** You should have received a copy of the GNU General Public License
17** along with TACK; see the file COPYING. If not, write to
18** the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
19** Boston, MA 02110-1301, USA
20*/
21/* initialization and wrapup code */
22
23#include <tack.h>
24
25MODULE_ID("$Id: init.c,v 1.6 2005/09/17 19:49:16 tom Exp $")
26
27#if NCURSES_VERSION_MAJOR >= 5 || NCURSES_VERSION_PATCH >= 981219
28#define _nc_get_curterm(p) _nc_get_tty_mode(p)
29#endif
30
31FILE *debug_fp;
32char temp[1024];
33char tty_basename[64];
34
35void
36put_name(const char *cap, const char *name)
37{ /* send the cap name followed by the cap */
38 if (cap) {
39 ptext(name);
40 tc_putp(cap);
41 }
42}
43
44static void
45report_cap(const char *tag, const char *s)
46{ /* expand the cap or print *** missing *** */
47 int i;
48
49 ptext(tag);
50 for (i = char_count; i < 13; i++) {
51 putchp(' ');
52 }
53 put_str(" = ");
54 if (s) {
55 putln(expand(s));
56 } else {
57 putln("*** missing ***");
58 }
59}
60
61
62void
63reset_init(void)
64{ /* send the reset and init strings */
65 int i;
66
67 ptext("Terminal reset");
68 i = char_count;
69 put_name(reset_1string, " (rs1)");
70 put_name(reset_2string, " (rs2)");
71 /* run the reset file */
72 if (reset_file && reset_file[0]) {
73 FILE *fp;
74 int ch;
75
76 can_test("rf", FLAG_TESTED);
77 if ((fp = fopen(reset_file, "r"))) { /* send the reset file */
78 sprintf(temp, " (rf) %s", reset_file);
79 ptextln(temp);
80 while (1) {
81 ch = getc(fp);
82 if (ch == EOF)
83 break;
84 put_this(ch);
85 }
86 fclose(fp);
87 } else {
88 sprintf(temp, "\nCannot open reset file (rf) %s", reset_file);
89 ptextln(temp);
90 }
91 }
92 put_name(reset_3string, " (rs3)");
93 if (i != char_count) {
94 put_crlf();
95 }
96 ptext(" init");
97 put_name(init_1string, " (is1)");
98 put_name(init_2string, " (is2)");
99 if (set_tab && clear_all_tabs && init_tabs != 8) {
100 put_crlf();
101 tc_putp(clear_all_tabs);
102 for (char_count = 0; char_count < columns; char_count++) {
103 put_this(' ');
104 if ((char_count & 7) == 7) {
105 tc_putp(set_tab);
106 }
107 }
108 put_cr();
109 }
110 /* run the initialization file */
111 if (init_file && init_file[0]) {
112 FILE *fp;
113 int ch;
114
115 can_test("if", FLAG_TESTED);
116 if ((fp = fopen(init_file, "r"))) { /* send the init file */
117 sprintf(temp, " (if) %s", init_file);
118 ptextln(temp);
119 while (1) {
120 ch = getc(fp);
121 if (ch == EOF)
122 break;
123 put_this(ch);
124 }
125 fclose(fp);
126 } else {
127 sprintf(temp, "\nCannot open init file (if) %s", init_file);
128 ptextln(temp);
129 }
130 }
131 if (init_prog) {
132 can_test("iprog", FLAG_TESTED);
133 (void) system(init_prog);
134 }
135 put_name(init_3string, " (is3)");
136
137 fflush(stdout);
138}
139
140/*
141** display_basic()
142**
143** display the basic terminal definitions
144*/
145void
146display_basic(void)
147{
148 put_str("Name: ");
149 putln(ttytype);
150
151 report_cap("\\r ^M (cr)", carriage_return);
152 report_cap("\\n ^J (ind)", scroll_forward);
153 report_cap("\\b ^H (cub1)", cursor_left);
154 report_cap("\\t ^I (ht)", tab);
155/* report_cap("\\f ^L (ff)", form_feed); */
156 if (newline) {
157 /* OK if missing */
158 report_cap(" (nel)", newline);
159 }
160 report_cap(" (clear)", clear_screen);
161 if (!cursor_home && cursor_address) {
162 report_cap("(cup) (home)", tparm(cursor_address, 0, 0));
163 } else {
164 report_cap(" (home)", cursor_home);
165 }
166#ifdef user9
167 report_cap("ENQ (u9)", user9);
168#endif
169#ifdef user8
170 report_cap("ACK (u8)", user8);
171#endif
172
173 sprintf(temp, "\nTerminal size: %d x %d. Baud rate: %u. Frame size: %d.%d",
174 columns, lines,
175 tty_baud_rate,
176 tty_frame_size >> 1,
177 (tty_frame_size & 1) * 5);
178 putln(temp);
179}
180
181/*
182** curses_setup(exec_name)
183**
184** Startup ncurses
185*/
186void
187curses_setup(
188 char *exec_name)
189{
190 int status;
191 static TERMTYPE term;
192 char tty_filename[2048];
193
194 tty_init();
195
196 /**
197 See if the terminal is in the terminfo data base. This call has
198 two useful benefits, 1) it returns the filename of the terminfo entry,
199 and 2) it searches only terminfo's. This allows us to abort before
200 ncurses starts scanning the termcap file.
201 **/
202 if ((status = _nc_read_entry(tty_basename, tty_filename, &term)) == 0) {
203 const TERMTYPE *fallback = _nc_fallback(tty_basename);
204
205 if (fallback) {
206 term = *fallback;
207 sprintf(tty_filename, "(fallback)%s", tty_basename);
208 status = 1;
209 } else {
210 fprintf(stderr, "Terminal not found: TERM=%s\n", tty_basename);
211 show_usage(exec_name);
212 exit(1);
213 }
214 }
215 if (status == -1) {
216 fprintf(stderr, "Terminfo database is inaccessible\n");
217 exit(1);
218 }
219
220 /**
221 This call will load the terminfo data base and set the cur-term
222 variable. Only terminals that actually exist will get here so its
223 OK to ignore errors. This is a good thing since ncurses does not
224 permit (os) or (gn) to be set.
225 **/
226 setupterm(tty_basename, 1, &status);
227
228 /**
229 Get the current terminal definitions. This must be done before
230 getting the baudrate.
231 **/
232 _nc_get_curterm(&cur_term->Nttyb);
233 tty_baud_rate = baudrate();
234 tty_cps = (tty_baud_rate << 1) / tty_frame_size;
235
236 /* set up the defaults */
237 replace_mode = TRUE;
238 scan_mode = 0;
239 char_count = 0;
240 select_delay_type = debug_level = 0;
241 char_mask = (meta_on && meta_on[0] == '\0') ? ALLOW_PARITY : STRIP_PARITY;
242 /* Don't change the XON/XOFF modes yet. */
243 select_xon_xoff = initial_stty_query(TTY_XON_XOFF) ? 1 : needs_xon_xoff;
244
245 fflush(stdout); /* flush any output */
246 tty_set();
247
248 go_home(); /* set can_go_home */
249 put_clear(); /* set can_clear_screen */
250
251 if (send_reset_init) {
252 reset_init();
253 }
254
255 /*
256 I assume that the reset and init strings may not have the correct
257 pads. (Because that part of the test comes much later.) Because
258 of this, I allow the terminal some time to catch up.
259 */
260 fflush(stdout); /* waste some time */
261 sleep(1); /* waste more time */
262 charset_can_test();
263 can_test("lines cols cr nxon rf if iprog rmp smcup rmcup", FLAG_CAN_TEST);
264 edit_init(); /* initialize the edit data base */
265
266 if (send_reset_init && enter_ca_mode) {
267 tc_putp(enter_ca_mode);
268 put_clear(); /* just in case we switched pages */
269 }
270 put_crlf();
271 ptext("Using terminfo from: ");
272 ptextln(tty_filename);
273 put_crlf();
274
275 if (tty_can_sync == SYNC_NEEDED) {
276 verify_time();
277 }
278
279 display_basic();
280}
281
282/*
283** bye_kids(exit-condition)
284**
285** Shutdown the terminal, clear the signals, and exit
286*/
287void
288bye_kids(int n)
289{ /* reset the tty and exit */
290 ignoresig();
291 if (send_reset_init) {
292 if (exit_ca_mode) {
293 tc_putp(exit_ca_mode);
294 }
295 if (initial_stty_query(TTY_XON_XOFF)) {
296 if (enter_xon_mode) {
297 tc_putp(enter_xon_mode);
298 }
299 } else if (exit_xon_mode) {
300 tc_putp(exit_xon_mode);
301 }
302 }
303 if (debug_fp) {
304 fclose(debug_fp);
305 }
306 if (log_fp) {
307 fclose(log_fp);
308 }
309 tty_reset();
310 fclose(stdin);
311 fclose(stdout);
312 fclose(stderr);
313 if (not_a_tty)
314 sleep(1);
315 exit(n);
316}
Note: See TracBrowser for help on using the repository browser.