source: trunk/gcc/boehm-gc/include/gc.h

Last change on this file was 2, checked in by bird, 23 years ago

Initial revision
  • Property cvs2svn:cvs-rev set to 1.1
  • Property svn:eol-style set to native
  • Property svn:executable set to *
File size: 39.2 KB
Line 
1/*
2 * Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers
3 * Copyright (c) 1991-1995 by Xerox Corporation. All rights reserved.
4 * Copyright 1996-1999 by Silicon Graphics. All rights reserved.
5 * Copyright 1999 by Hewlett-Packard Company. All rights reserved.
6 *
7 * THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
8 * OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
9 *
10 * Permission is hereby granted to use or copy this program
11 * for any purpose, provided the above notices are retained on all copies.
12 * Permission to modify the code and to distribute modified code is granted,
13 * provided the above notices are retained, and a notice that the code was
14 * modified is included with the above copyright notice.
15 */
16
17/*
18 * Note that this defines a large number of tuning hooks, which can
19 * safely be ignored in nearly all cases. For normal use it suffices
20 * to call only GC_MALLOC and perhaps GC_REALLOC.
21 * For better performance, also look at GC_MALLOC_ATOMIC, and
22 * GC_enable_incremental. If you need an action to be performed
23 * immediately before an object is collected, look at GC_register_finalizer.
24 * If you are using Solaris threads, look at the end of this file.
25 * Everything else is best ignored unless you encounter performance
26 * problems.
27 */
28
29#ifndef _GC_H
30
31# define _GC_H
32
33/*
34 * Some tests for old macros. These violate our namespace rules and will
35 * disappear shortly. Use the GC_ names.
36 */
37#if defined(SOLARIS_THREADS) || defined(_SOLARIS_THREADS)
38# define GC_SOLARIS_THREADS
39#endif
40#if defined(_SOLARIS_PTHREADS)
41# define GC_SOLARIS_PTHREADS
42#endif
43#if defined(IRIX_THREADS)
44# define GC_IRIX_THREADS
45#endif
46#if defined(HPUX_THREADS)
47# define GC_HPUX_THREADS
48#endif
49#if defined(OSF1_THREADS)
50# define GC_OSF1_THREADS
51#endif
52#if defined(LINUX_THREADS)
53# define GC_LINUX_THREADS
54#endif
55#if defined(WIN32_THREADS)
56# define GC_WIN32_THREADS
57#endif
58#if defined(USE_LD_WRAP)
59# define GC_USE_LD_WRAP
60#endif
61
62#if !defined(_REENTRANT) && (defined(GC_SOLARIS_THREADS) \
63 || defined(GC_SOLARIS_PTHREADS) \
64 || defined(GC_HPUX_THREADS) \
65 || defined(GC_LINUX_THREADS))
66# define _REENTRANT
67 /* Better late than never. This fails if system headers that */
68 /* depend on this were previously included. */
69#endif
70
71#if defined(GC_SOLARIS_PTHREADS) && !defined(GC_SOLARIS_THREADS)
72# define GC_SOLARIS_THREADS
73#endif
74
75# if defined(GC_SOLARIS_PTHREADS) || defined(GC_FREEBSD_THREADS) || \
76 defined(GC_IRIX_THREADS) || defined(GC_LINUX_THREADS) || \
77 defined(GC_HPUX_THREADS) || defined(GC_OSF1_THREADS)
78# define GC_PTHREADS
79# endif
80
81# define __GC
82# include <stddef.h>
83# ifdef _WIN32_WCE
84/* Yet more kluges for WinCE */
85# include <stdlib.h> /* size_t is defined here */
86 typedef long ptrdiff_t; /* ptrdiff_t is not defined */
87# endif
88
89#if defined(__MINGW32__) &&defined(_DLL) && !defined(GC_NOT_DLL)
90# ifdef GC_BUILD
91# define GC_API __declspec(dllexport)
92# else
93# define GC_API __declspec(dllimport)
94# endif
95#endif
96
97#if (defined(__DMC__) || defined(_MSC_VER)) \
98 && (defined(_DLL) && !defined(GC_NOT_DLL) \
99 || defined(GC_DLL))
100# ifdef GC_BUILD
101# define GC_API extern __declspec(dllexport)
102# else
103# define GC_API __declspec(dllimport)
104# endif
105#endif
106
107#if defined(__WATCOMC__) && defined(GC_DLL)
108# ifdef GC_BUILD
109# define GC_API extern __declspec(dllexport)
110# else
111# define GC_API extern __declspec(dllimport)
112# endif
113#endif
114
115#ifndef GC_API
116#define GC_API extern
117#endif
118
119# if defined(__STDC__) || defined(__cplusplus)
120# define GC_PROTO(args) args
121 typedef void * GC_PTR;
122# define GC_CONST const
123# else
124# define GC_PROTO(args) ()
125 typedef char * GC_PTR;
126# define GC_CONST
127# endif
128
129# ifdef __cplusplus
130 extern "C" {
131# endif
132
133
134/* Define word and signed_word to be unsigned and signed types of the */
135/* size as char * or void *. There seems to be no way to do this */
136/* even semi-portably. The following is probably no better/worse */
137/* than almost anything else. */
138/* The ANSI standard suggests that size_t and ptr_diff_t might be */
139/* better choices. But those appear to have incorrect definitions */
140/* on may systems. Notably "typedef int size_t" seems to be both */
141/* frequent and WRONG. */
142typedef unsigned long GC_word;
143typedef long GC_signed_word;
144
145/* Public read-only variables */
146
147GC_API GC_word GC_gc_no;/* Counter incremented per collection. */
148 /* Includes empty GCs at startup. */
149
150GC_API int GC_parallel; /* GC is parallelized for performance on */
151 /* multiprocessors. Currently set only */
152 /* implicitly if collector is built with */
153 /* -DPARALLEL_MARK and if either: */
154 /* Env variable GC_NPROC is set to > 1, or */
155 /* GC_NPROC is not set and this is an MP. */
156 /* If GC_parallel is set, incremental */
157 /* collection is aonly partially functional, */
158 /* and may not be desirable. */
159
160
161/* Public R/W variables */
162
163GC_API GC_PTR (*GC_oom_fn) GC_PROTO((size_t bytes_requested));
164 /* When there is insufficient memory to satisfy */
165 /* an allocation request, we return */
166 /* (*GC_oom_fn)(). By default this just */
167 /* returns 0. */
168 /* If it returns, it must return 0 or a valid */
169 /* pointer to a previously allocated heap */
170 /* object. */
171
172GC_API int GC_find_leak;
173 /* Do not actually garbage collect, but simply */
174 /* report inaccessible memory that was not */
175 /* deallocated with GC_free. Initial value */
176 /* is determined by FIND_LEAK macro. */
177
178GC_API int GC_all_interior_pointers;
179 /* Arrange for pointers to object interiors to */
180 /* be recognized as valid. May not be changed */
181 /* after GC initialization. */
182 /* Initial value is determined by */
183 /* -DALL_INTERIOR_POINTERS. */
184 /* Unless DONT_ADD_BYTE_AT_END is defined, this */
185 /* also affects whether sizes are increased by */
186 /* at least a byte to allow "off the end" */
187 /* pointer recognition. */
188 /* MUST BE 0 or 1. */
189
190GC_API int GC_quiet; /* Disable statistics output. Only matters if */
191 /* collector has been compiled with statistics */
192 /* enabled. This involves a performance cost, */
193 /* and is thus not the default. */
194
195GC_API int GC_finalize_on_demand;
196 /* If nonzero, finalizers will only be run in */
197 /* response to an explicit GC_invoke_finalizers */
198 /* call. The default is determined by whether */
199 /* the FINALIZE_ON_DEMAND macro is defined */
200 /* when the collector is built. */
201
202GC_API int GC_java_finalization;
203 /* Mark objects reachable from finalizable */
204 /* objects in a separate postpass. This makes */
205 /* it a bit safer to use non-topologically- */
206 /* ordered finalization. Default value is */
207 /* determined by JAVA_FINALIZATION macro. */
208
209GC_API void (* GC_finalizer_notifier)();
210 /* Invoked by the collector when there are */
211 /* objects to be finalized. Invoked at most */
212 /* once per GC cycle. Never invoked unless */
213 /* GC_finalize_on_demand is set. */
214 /* Typically this will notify a finalization */
215 /* thread, which will call GC_invoke_finalizers */
216 /* in response. */
217
218GC_API int GC_dont_gc; /* Dont collect unless explicitly requested, e.g. */
219 /* because it's not safe. */
220
221GC_API int GC_dont_expand;
222 /* Dont expand heap unless explicitly requested */
223 /* or forced to. */
224
225GC_API int GC_use_entire_heap;
226 /* Causes the nonincremental collector to use the */
227 /* entire heap before collecting. This was the only */
228 /* option for GC versions < 5.0. This sometimes */
229 /* results in more large block fragmentation, since */
230 /* very larg blocks will tend to get broken up */
231 /* during each GC cycle. It is likely to result in a */
232 /* larger working set, but lower collection */
233 /* frequencies, and hence fewer instructions executed */
234 /* in the collector. */
235
236GC_API int GC_full_freq; /* Number of partial collections between */
237 /* full collections. Matters only if */
238 /* GC_incremental is set. */
239 /* Full collections are also triggered if */
240 /* the collector detects a substantial */
241 /* increase in the number of in-use heap */
242 /* blocks. Values in the tens are now */
243 /* perfectly reasonable, unlike for */
244 /* earlier GC versions. */
245
246GC_API GC_word GC_non_gc_bytes;
247 /* Bytes not considered candidates for collection. */
248 /* Used only to control scheduling of collections. */
249 /* Updated by GC_malloc_uncollectable and GC_free. */
250 /* Wizards only. */
251
252GC_API int GC_no_dls;
253 /* Don't register dynamic library data segments. */
254 /* Wizards only. Should be used only if the */
255 /* application explicitly registers all roots. */
256 /* In Microsoft Windows environments, this will */
257 /* usually also prevent registration of the */
258 /* main data segment as part of the root set. */
259
260GC_API GC_word GC_free_space_divisor;
261 /* We try to make sure that we allocate at */
262 /* least N/GC_free_space_divisor bytes between */
263 /* collections, where N is the heap size plus */
264 /* a rough estimate of the root set size. */
265 /* Initially, GC_free_space_divisor = 4. */
266 /* Increasing its value will use less space */
267 /* but more collection time. Decreasing it */
268 /* will appreciably decrease collection time */
269 /* at the expense of space. */
270 /* GC_free_space_divisor = 1 will effectively */
271 /* disable collections. */
272
273GC_API GC_word GC_max_retries;
274 /* The maximum number of GCs attempted before */
275 /* reporting out of memory after heap */
276 /* expansion fails. Initially 0. */
277
278
279GC_API char *GC_stackbottom; /* Cool end of user stack. */
280 /* May be set in the client prior to */
281 /* calling any GC_ routines. This */
282 /* avoids some overhead, and */
283 /* potentially some signals that can */
284 /* confuse debuggers. Otherwise the */
285 /* collector attempts to set it */
286 /* automatically. */
287 /* For multithreaded code, this is the */
288 /* cold end of the stack for the */
289 /* primordial thread. */
290
291GC_API int GC_dont_precollect; /* Don't collect as part of */
292 /* initialization. Should be set only */
293 /* if the client wants a chance to */
294 /* manually initialize the root set */
295 /* before the first collection. */
296 /* Interferes with blacklisting. */
297 /* Wizards only. */
298
299/* Public procedures */
300
301/* Initialize the collector. This is only required when using thread-local
302 * allocation, since unlike the regular allocation routines, GC_local_malloc
303 * is not self-initializing. If you use GC_local_malloc you should arrange
304 * to call this somehow (e.g. from a constructor) before doing any allocation.
305 */
306GC_API void GC_init GC_PROTO((void));
307
308GC_API unsigned long GC_time_limit;
309 /* If incremental collection is enabled, */
310 /* We try to terminate collections */
311 /* after this many milliseconds. Not a */
312 /* hard time bound. Setting this to */
313 /* GC_TIME_UNLIMITED will essentially */
314 /* disable incremental collection while */
315 /* leaving generational collection */
316 /* enabled. */
317# define GC_TIME_UNLIMITED 999999
318 /* Setting GC_time_limit to this value */
319 /* will disable the "pause time exceeded */
320 /* tests. */
321
322/*
323 * general purpose allocation routines, with roughly malloc calling conv.
324 * The atomic versions promise that no relevant pointers are contained
325 * in the object. The nonatomic versions guarantee that the new object
326 * is cleared. GC_malloc_stubborn promises that no changes to the object
327 * will occur after GC_end_stubborn_change has been called on the
328 * result of GC_malloc_stubborn. GC_malloc_uncollectable allocates an object
329 * that is scanned for pointers to collectable objects, but is not itself
330 * collectable. The object is scanned even if it does not appear to
331 * be reachable. GC_malloc_uncollectable and GC_free called on the resulting
332 * object implicitly update GC_non_gc_bytes appropriately.
333 *
334 * Note that the GC_malloc_stubborn support is stubbed out by default
335 * starting in 6.0. GC_malloc_stubborn is an alias for GC_malloc unless
336 * the collector is built with STUBBORN_ALLOC defined.
337 */
338GC_API GC_PTR GC_malloc GC_PROTO((size_t size_in_bytes));
339GC_API GC_PTR GC_malloc_atomic GC_PROTO((size_t size_in_bytes));
340GC_API GC_PTR GC_malloc_uncollectable GC_PROTO((size_t size_in_bytes));
341GC_API GC_PTR GC_malloc_stubborn GC_PROTO((size_t size_in_bytes));
342
343/* The following is only defined if the library has been suitably */
344/* compiled: */
345GC_API GC_PTR GC_malloc_atomic_uncollectable GC_PROTO((size_t size_in_bytes));
346
347/* Explicitly deallocate an object. Dangerous if used incorrectly. */
348/* Requires a pointer to the base of an object. */
349/* If the argument is stubborn, it should not be changeable when freed. */
350/* An object should not be enable for finalization when it is */
351/* explicitly deallocated. */
352/* GC_free(0) is a no-op, as required by ANSI C for free. */
353GC_API void GC_free GC_PROTO((GC_PTR object_addr));
354
355/*
356 * Stubborn objects may be changed only if the collector is explicitly informed.
357 * The collector is implicitly informed of coming change when such
358 * an object is first allocated. The following routines inform the
359 * collector that an object will no longer be changed, or that it will
360 * once again be changed. Only nonNIL pointer stores into the object
361 * are considered to be changes. The argument to GC_end_stubborn_change
362 * must be exacly the value returned by GC_malloc_stubborn or passed to
363 * GC_change_stubborn. (In the second case it may be an interior pointer
364 * within 512 bytes of the beginning of the objects.)
365 * There is a performance penalty for allowing more than
366 * one stubborn object to be changed at once, but it is acceptable to
367 * do so. The same applies to dropping stubborn objects that are still
368 * changeable.
369 */
370GC_API void GC_change_stubborn GC_PROTO((GC_PTR));
371GC_API void GC_end_stubborn_change GC_PROTO((GC_PTR));
372
373/* Return a pointer to the base (lowest address) of an object given */
374/* a pointer to a location within the object. */
375/* I.e. map an interior pointer to the corresponding bas pointer. */
376/* Note that with debugging allocation, this returns a pointer to the */
377/* actual base of the object, i.e. the debug information, not to */
378/* the base of the user object. */
379/* Return 0 if displaced_pointer doesn't point to within a valid */
380/* object. */
381GC_API GC_PTR GC_base GC_PROTO((GC_PTR displaced_pointer));
382
383/* Given a pointer to the base of an object, return its size in bytes. */
384/* The returned size may be slightly larger than what was originally */
385/* requested. */
386GC_API size_t GC_size GC_PROTO((GC_PTR object_addr));
387
388/* For compatibility with C library. This is occasionally faster than */
389/* a malloc followed by a bcopy. But if you rely on that, either here */
390/* or with the standard C library, your code is broken. In my */
391/* opinion, it shouldn't have been invented, but now we're stuck. -HB */
392/* The resulting object has the same kind as the original. */
393/* If the argument is stubborn, the result will have changes enabled. */
394/* It is an error to have changes enabled for the original object. */
395/* Follows ANSI comventions for NULL old_object. */
396GC_API GC_PTR GC_realloc
397 GC_PROTO((GC_PTR old_object, size_t new_size_in_bytes));
398
399/* Explicitly increase the heap size. */
400/* Returns 0 on failure, 1 on success. */
401GC_API int GC_expand_hp GC_PROTO((size_t number_of_bytes));
402
403/* Limit the heap size to n bytes. Useful when you're debugging, */
404/* especially on systems that don't handle running out of memory well. */
405/* n == 0 ==> unbounded. This is the default. */
406GC_API void GC_set_max_heap_size GC_PROTO((GC_word n));
407
408/* Inform the collector that a certain section of statically allocated */
409/* memory contains no pointers to garbage collected memory. Thus it */
410/* need not be scanned. This is sometimes important if the application */
411/* maps large read/write files into the address space, which could be */
412/* mistaken for dynamic library data segments on some systems. */
413GC_API void GC_exclude_static_roots GC_PROTO((GC_PTR start, GC_PTR finish));
414
415/* Clear the set of root segments. Wizards only. */
416GC_API void GC_clear_roots GC_PROTO((void));
417
418/* Add a root segment. Wizards only. */
419GC_API void GC_add_roots GC_PROTO((char * low_address,
420 char * high_address_plus_1));
421
422/* Add a displacement to the set of those considered valid by the */
423/* collector. GC_register_displacement(n) means that if p was returned */
424/* by GC_malloc, then (char *)p + n will be considered to be a valid */
425/* pointer to n. N must be small and less than the size of p. */
426/* (All pointers to the interior of objects from the stack are */
427/* considered valid in any case. This applies to heap objects and */
428/* static data.) */
429/* Preferably, this should be called before any other GC procedures. */
430/* Calling it later adds to the probability of excess memory */
431/* retention. */
432/* This is a no-op if the collector was compiled with recognition of */
433/* arbitrary interior pointers enabled, which is now the default. */
434GC_API void GC_register_displacement GC_PROTO((GC_word n));
435
436/* The following version should be used if any debugging allocation is */
437/* being done. */
438GC_API void GC_debug_register_displacement GC_PROTO((GC_word n));
439
440/* Explicitly trigger a full, world-stop collection. */
441GC_API void GC_gcollect GC_PROTO((void));
442
443/* Trigger a full world-stopped collection. Abort the collection if */
444/* and when stop_func returns a nonzero value. Stop_func will be */
445/* called frequently, and should be reasonably fast. This works even */
446/* if virtual dirty bits, and hence incremental collection is not */
447/* available for this architecture. Collections can be aborted faster */
448/* than normal pause times for incremental collection. However, */
449/* aborted collections do no useful work; the next collection needs */
450/* to start from the beginning. */
451/* Return 0 if the collection was aborted, 1 if it succeeded. */
452typedef int (* GC_stop_func) GC_PROTO((void));
453GC_API int GC_try_to_collect GC_PROTO((GC_stop_func stop_func));
454
455/* Return the number of bytes in the heap. Excludes collector private */
456/* data structures. Includes empty blocks and fragmentation loss. */
457/* Includes some pages that were allocated but never written. */
458GC_API size_t GC_get_heap_size GC_PROTO((void));
459
460/* Return a lower bound on the number of free bytes in the heap. */
461GC_API size_t GC_get_free_bytes GC_PROTO((void));
462
463/* Return the number of bytes allocated since the last collection. */
464GC_API size_t GC_get_bytes_since_gc GC_PROTO((void));
465
466/* Return the total number of bytes allocated in this process. */
467/* Never decreases. */
468GC_API size_t GC_get_total_bytes GC_PROTO((void));
469
470/* Enable incremental/generational collection. */
471/* Not advisable unless dirty bits are */
472/* available or most heap objects are */
473/* pointerfree(atomic) or immutable. */
474/* Don't use in leak finding mode. */
475/* Ignored if GC_dont_gc is true. */
476/* Only the generational piece of this is */
477/* functional if GC_parallel is TRUE. */
478GC_API void GC_enable_incremental GC_PROTO((void));
479
480/* Does incremental mode write-protect pages? Returns zero or */
481/* more of the following, or'ed together: */
482#define GC_PROTECTS_POINTER_HEAP 1 /* May protect non-atomic objs. */
483#define GC_PROTECTS_PTRFREE_HEAP 2
484#define GC_PROTECTS_STATIC_DATA 4 /* Curently never. */
485#define GC_PROTECTS_STACK 8 /* Probably impractical. */
486
487#define GC_PROTECTS_NONE 0
488GC_API int GC_incremental_protection_needs GC_PROTO((void));
489
490/* Perform some garbage collection work, if appropriate. */
491/* Return 0 if there is no more work to be done. */
492/* Typically performs an amount of work corresponding roughly */
493/* to marking from one page. May do more work if further */
494/* progress requires it, e.g. if incremental collection is */
495/* disabled. It is reasonable to call this in a wait loop */
496/* until it returns 0. */
497GC_API int GC_collect_a_little GC_PROTO((void));
498
499/* Allocate an object of size lb bytes. The client guarantees that */
500/* as long as the object is live, it will be referenced by a pointer */
501/* that points to somewhere within the first 256 bytes of the object. */
502/* (This should normally be declared volatile to prevent the compiler */
503/* from invalidating this assertion.) This routine is only useful */
504/* if a large array is being allocated. It reduces the chance of */
505/* accidentally retaining such an array as a result of scanning an */
506/* integer that happens to be an address inside the array. (Actually, */
507/* it reduces the chance of the allocator not finding space for such */
508/* an array, since it will try hard to avoid introducing such a false */
509/* reference.) On a SunOS 4.X or MS Windows system this is recommended */
510/* for arrays likely to be larger than 100K or so. For other systems, */
511/* or if the collector is not configured to recognize all interior */
512/* pointers, the threshold is normally much higher. */
513GC_API GC_PTR GC_malloc_ignore_off_page GC_PROTO((size_t lb));
514GC_API GC_PTR GC_malloc_atomic_ignore_off_page GC_PROTO((size_t lb));
515
516#if defined(__sgi) && !defined(__GNUC__) && _COMPILER_VERSION >= 720
517# define GC_ADD_CALLER
518# define GC_RETURN_ADDR (GC_word)__return_address
519#endif
520
521#ifdef GC_ADD_CALLER
522# define GC_EXTRAS GC_RETURN_ADDR, __FILE__, __LINE__
523# define GC_EXTRA_PARAMS GC_word ra, GC_CONST char * s, int i
524#else
525# define GC_EXTRAS __FILE__, __LINE__
526# define GC_EXTRA_PARAMS GC_CONST char * s, int i
527#endif
528
529/* Debugging (annotated) allocation. GC_gcollect will check */
530/* objects allocated in this way for overwrites, etc. */
531GC_API GC_PTR GC_debug_malloc
532 GC_PROTO((size_t size_in_bytes, GC_EXTRA_PARAMS));
533GC_API GC_PTR GC_debug_malloc_atomic
534 GC_PROTO((size_t size_in_bytes, GC_EXTRA_PARAMS));
535GC_API GC_PTR GC_debug_malloc_uncollectable
536 GC_PROTO((size_t size_in_bytes, GC_EXTRA_PARAMS));
537GC_API GC_PTR GC_debug_malloc_stubborn
538 GC_PROTO((size_t size_in_bytes, GC_EXTRA_PARAMS));
539GC_API void GC_debug_free GC_PROTO((GC_PTR object_addr));
540GC_API GC_PTR GC_debug_realloc
541 GC_PROTO((GC_PTR old_object, size_t new_size_in_bytes,
542 GC_EXTRA_PARAMS));
543
544GC_API void GC_debug_change_stubborn GC_PROTO((GC_PTR));
545GC_API void GC_debug_end_stubborn_change GC_PROTO((GC_PTR));
546# ifdef GC_DEBUG
547# define GC_MALLOC(sz) GC_debug_malloc(sz, GC_EXTRAS)
548# define GC_MALLOC_ATOMIC(sz) GC_debug_malloc_atomic(sz, GC_EXTRAS)
549# define GC_MALLOC_UNCOLLECTABLE(sz) GC_debug_malloc_uncollectable(sz, \
550 GC_EXTRAS)
551# define GC_REALLOC(old, sz) GC_debug_realloc(old, sz, GC_EXTRAS)
552# define GC_FREE(p) GC_debug_free(p)
553# define GC_REGISTER_FINALIZER(p, f, d, of, od) \
554 GC_debug_register_finalizer(p, f, d, of, od)
555# define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \
556 GC_debug_register_finalizer_ignore_self(p, f, d, of, od)
557# define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \
558 GC_debug_register_finalizer_no_order(p, f, d, of, od)
559# define GC_MALLOC_STUBBORN(sz) GC_debug_malloc_stubborn(sz, GC_EXTRAS);
560# define GC_CHANGE_STUBBORN(p) GC_debug_change_stubborn(p)
561# define GC_END_STUBBORN_CHANGE(p) GC_debug_end_stubborn_change(p)
562# define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \
563 GC_general_register_disappearing_link(link, GC_base(obj))
564# define GC_REGISTER_DISPLACEMENT(n) GC_debug_register_displacement(n)
565# else
566# define GC_MALLOC(sz) GC_malloc(sz)
567# define GC_MALLOC_ATOMIC(sz) GC_malloc_atomic(sz)
568# define GC_MALLOC_UNCOLLECTABLE(sz) GC_malloc_uncollectable(sz)
569# define GC_REALLOC(old, sz) GC_realloc(old, sz)
570# define GC_FREE(p) GC_free(p)
571# define GC_REGISTER_FINALIZER(p, f, d, of, od) \
572 GC_register_finalizer(p, f, d, of, od)
573# define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \
574 GC_register_finalizer_ignore_self(p, f, d, of, od)
575# define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \
576 GC_register_finalizer_no_order(p, f, d, of, od)
577# define GC_MALLOC_STUBBORN(sz) GC_malloc_stubborn(sz)
578# define GC_CHANGE_STUBBORN(p) GC_change_stubborn(p)
579# define GC_END_STUBBORN_CHANGE(p) GC_end_stubborn_change(p)
580# define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \
581 GC_general_register_disappearing_link(link, obj)
582# define GC_REGISTER_DISPLACEMENT(n) GC_register_displacement(n)
583# endif
584/* The following are included because they are often convenient, and */
585/* reduce the chance for a misspecifed size argument. But calls may */
586/* expand to something syntactically incorrect if t is a complicated */
587/* type expression. */
588# define GC_NEW(t) (t *)GC_MALLOC(sizeof (t))
589# define GC_NEW_ATOMIC(t) (t *)GC_MALLOC_ATOMIC(sizeof (t))
590# define GC_NEW_STUBBORN(t) (t *)GC_MALLOC_STUBBORN(sizeof (t))
591# define GC_NEW_UNCOLLECTABLE(t) (t *)GC_MALLOC_UNCOLLECTABLE(sizeof (t))
592
593/* Finalization. Some of these primitives are grossly unsafe. */
594/* The idea is to make them both cheap, and sufficient to build */
595/* a safer layer, closer to PCedar finalization. */
596/* The interface represents my conclusions from a long discussion */
597/* with Alan Demers, Dan Greene, Carl Hauser, Barry Hayes, */
598/* Christian Jacobi, and Russ Atkinson. It's not perfect, and */
599/* probably nobody else agrees with it. Hans-J. Boehm 3/13/92 */
600typedef void (*GC_finalization_proc)
601 GC_PROTO((GC_PTR obj, GC_PTR client_data));
602
603GC_API void GC_register_finalizer
604 GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
605 GC_finalization_proc *ofn, GC_PTR *ocd));
606GC_API void GC_debug_register_finalizer
607 GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
608 GC_finalization_proc *ofn, GC_PTR *ocd));
609 /* When obj is no longer accessible, invoke */
610 /* (*fn)(obj, cd). If a and b are inaccessible, and */
611 /* a points to b (after disappearing links have been */
612 /* made to disappear), then only a will be */
613 /* finalized. (If this does not create any new */
614 /* pointers to b, then b will be finalized after the */
615 /* next collection.) Any finalizable object that */
616 /* is reachable from itself by following one or more */
617 /* pointers will not be finalized (or collected). */
618 /* Thus cycles involving finalizable objects should */
619 /* be avoided, or broken by disappearing links. */
620 /* All but the last finalizer registered for an object */
621 /* is ignored. */
622 /* Finalization may be removed by passing 0 as fn. */
623 /* Finalizers are implicitly unregistered just before */
624 /* they are invoked. */
625 /* The old finalizer and client data are stored in */
626 /* *ofn and *ocd. */
627 /* Fn is never invoked on an accessible object, */
628 /* provided hidden pointers are converted to real */
629 /* pointers only if the allocation lock is held, and */
630 /* such conversions are not performed by finalization */
631 /* routines. */
632 /* If GC_register_finalizer is aborted as a result of */
633 /* a signal, the object may be left with no */
634 /* finalization, even if neither the old nor new */
635 /* finalizer were NULL. */
636 /* Obj should be the nonNULL starting address of an */
637 /* object allocated by GC_malloc or friends. */
638 /* Note that any garbage collectable object referenced */
639 /* by cd will be considered accessible until the */
640 /* finalizer is invoked. */
641
642/* Another versions of the above follow. It ignores */
643/* self-cycles, i.e. pointers from a finalizable object to */
644/* itself. There is a stylistic argument that this is wrong, */
645/* but it's unavoidable for C++, since the compiler may */
646/* silently introduce these. It's also benign in that specific */
647/* case. */
648/* Note that cd will still be viewed as accessible, even if it */
649/* refers to the object itself. */
650GC_API void GC_register_finalizer_ignore_self
651 GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
652 GC_finalization_proc *ofn, GC_PTR *ocd));
653GC_API void GC_debug_register_finalizer_ignore_self
654 GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
655 GC_finalization_proc *ofn, GC_PTR *ocd));
656
657/* Another version of the above. It ignores all cycles. */
658/* It should probably only be used by Java implementations. */
659/* Note that cd will still be viewed as accessible, even if it */
660/* refers to the object itself. */
661GC_API void GC_register_finalizer_no_order
662 GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
663 GC_finalization_proc *ofn, GC_PTR *ocd));
664GC_API void GC_debug_register_finalizer_no_order
665 GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
666 GC_finalization_proc *ofn, GC_PTR *ocd));
667
668
669/* The following routine may be used to break cycles between */
670/* finalizable objects, thus causing cyclic finalizable */
671/* objects to be finalized in the correct order. Standard */
672/* use involves calling GC_register_disappearing_link(&p), */
673/* where p is a pointer that is not followed by finalization */
674/* code, and should not be considered in determining */
675/* finalization order. */
676GC_API int GC_register_disappearing_link GC_PROTO((GC_PTR * /* link */));
677 /* Link should point to a field of a heap allocated */
678 /* object obj. *link will be cleared when obj is */
679 /* found to be inaccessible. This happens BEFORE any */
680 /* finalization code is invoked, and BEFORE any */
681 /* decisions about finalization order are made. */
682 /* This is useful in telling the finalizer that */
683 /* some pointers are not essential for proper */
684 /* finalization. This may avoid finalization cycles. */
685 /* Note that obj may be resurrected by another */
686 /* finalizer, and thus the clearing of *link may */
687 /* be visible to non-finalization code. */
688 /* There's an argument that an arbitrary action should */
689 /* be allowed here, instead of just clearing a pointer. */
690 /* But this causes problems if that action alters, or */
691 /* examines connectivity. */
692 /* Returns 1 if link was already registered, 0 */
693 /* otherwise. */
694 /* Only exists for backward compatibility. See below: */
695
696GC_API int GC_general_register_disappearing_link
697 GC_PROTO((GC_PTR * /* link */, GC_PTR obj));
698 /* A slight generalization of the above. *link is */
699 /* cleared when obj first becomes inaccessible. This */
700 /* can be used to implement weak pointers easily and */
701 /* safely. Typically link will point to a location */
702 /* holding a disguised pointer to obj. (A pointer */
703 /* inside an "atomic" object is effectively */
704 /* disguised.) In this way soft */
705 /* pointers are broken before any object */
706 /* reachable from them are finalized. Each link */
707 /* May be registered only once, i.e. with one obj */
708 /* value. This was added after a long email discussion */
709 /* with John Ellis. */
710 /* Obj must be a pointer to the first word of an object */
711 /* we allocated. It is unsafe to explicitly deallocate */
712 /* the object containing link. Explicitly deallocating */
713 /* obj may or may not cause link to eventually be */
714 /* cleared. */
715GC_API int GC_unregister_disappearing_link GC_PROTO((GC_PTR * /* link */));
716 /* Returns 0 if link was not actually registered. */
717 /* Undoes a registration by either of the above two */
718 /* routines. */
719
720/* Auxiliary fns to make finalization work correctly with displaced */
721/* pointers introduced by the debugging allocators. */
722GC_API GC_PTR GC_make_closure GC_PROTO((GC_finalization_proc fn, GC_PTR data));
723GC_API void GC_debug_invoke_finalizer GC_PROTO((GC_PTR obj, GC_PTR data));
724
725/* Returns !=0 if GC_invoke_finalizers has something to do. */
726GC_API int GC_should_invoke_finalizers GC_PROTO((void));
727
728GC_API int GC_invoke_finalizers GC_PROTO((void));
729 /* Run finalizers for all objects that are ready to */
730 /* be finalized. Return the number of finalizers */
731 /* that were run. Normally this is also called */
732 /* implicitly during some allocations. If */
733 /* GC-finalize_on_demand is nonzero, it must be called */
734 /* explicitly. */
735
736/* GC_set_warn_proc can be used to redirect or filter warning messages. */
737/* p may not be a NULL pointer. */
738typedef void (*GC_warn_proc) GC_PROTO((char *msg, GC_word arg));
739GC_API GC_warn_proc GC_set_warn_proc GC_PROTO((GC_warn_proc p));
740 /* Returns old warning procedure. */
741
742/* The following is intended to be used by a higher level */
743/* (e.g. Java-like) finalization facility. It is expected */
744/* that finalization code will arrange for hidden pointers to */
745/* disappear. Otherwise objects can be accessed after they */
746/* have been collected. */
747/* Note that putting pointers in atomic objects or in */
748/* nonpointer slots of "typed" objects is equivalent to */
749/* disguising them in this way, and may have other advantages. */
750# if defined(I_HIDE_POINTERS) || defined(GC_I_HIDE_POINTERS)
751 typedef GC_word GC_hidden_pointer;
752# define HIDE_POINTER(p) (~(GC_hidden_pointer)(p))
753# define REVEAL_POINTER(p) ((GC_PTR)(HIDE_POINTER(p)))
754 /* Converting a hidden pointer to a real pointer requires verifying */
755 /* that the object still exists. This involves acquiring the */
756 /* allocator lock to avoid a race with the collector. */
757# endif /* I_HIDE_POINTERS */
758
759typedef GC_PTR (*GC_fn_type) GC_PROTO((GC_PTR client_data));
760GC_API GC_PTR GC_call_with_alloc_lock
761 GC_PROTO((GC_fn_type fn, GC_PTR client_data));
762
763/* The following routines are primarily intended for use with a */
764/* preprocessor which inserts calls to check C pointer arithmetic. */
765
766/* Check that p and q point to the same object. */
767/* Fail conspicuously if they don't. */
768/* Returns the first argument. */
769/* Succeeds if neither p nor q points to the heap. */
770/* May succeed if both p and q point to between heap objects. */
771GC_API GC_PTR GC_same_obj GC_PROTO((GC_PTR p, GC_PTR q));
772
773/* Checked pointer pre- and post- increment operations. Note that */
774/* the second argument is in units of bytes, not multiples of the */
775/* object size. This should either be invoked from a macro, or the */
776/* call should be automatically generated. */
777GC_API GC_PTR GC_pre_incr GC_PROTO((GC_PTR *p, size_t how_much));
778GC_API GC_PTR GC_post_incr GC_PROTO((GC_PTR *p, size_t how_much));
779
780/* Check that p is visible */
781/* to the collector as a possibly pointer containing location. */
782/* If it isn't fail conspicuously. */
783/* Returns the argument in all cases. May erroneously succeed */
784/* in hard cases. (This is intended for debugging use with */
785/* untyped allocations. The idea is that it should be possible, though */
786/* slow, to add such a call to all indirect pointer stores.) */
787/* Currently useless for multithreaded worlds. */
788GC_API GC_PTR GC_is_visible GC_PROTO((GC_PTR p));
789
790/* Check that if p is a pointer to a heap page, then it points to */
791/* a valid displacement within a heap object. */
792/* Fail conspicuously if this property does not hold. */
793/* Uninteresting with GC_all_interior_pointers. */
794/* Always returns its argument. */
795GC_API GC_PTR GC_is_valid_displacement GC_PROTO((GC_PTR p));
796
797/* Safer, but slow, pointer addition. Probably useful mainly with */
798/* a preprocessor. Useful only for heap pointers. */
799#ifdef GC_DEBUG
800# define GC_PTR_ADD3(x, n, type_of_result) \
801 ((type_of_result)GC_same_obj((x)+(n), (x)))
802# define GC_PRE_INCR3(x, n, type_of_result) \
803 ((type_of_result)GC_pre_incr(&(x), (n)*sizeof(*x))
804# define GC_POST_INCR2(x, type_of_result) \
805 ((type_of_result)GC_post_incr(&(x), sizeof(*x))
806# ifdef __GNUC__
807# define GC_PTR_ADD(x, n) \
808 GC_PTR_ADD3(x, n, typeof(x))
809# define GC_PRE_INCR(x, n) \
810 GC_PRE_INCR3(x, n, typeof(x))
811# define GC_POST_INCR(x, n) \
812 GC_POST_INCR3(x, typeof(x))
813# else
814 /* We can't do this right without typeof, which ANSI */
815 /* decided was not sufficiently useful. Repeatedly */
816 /* mentioning the arguments seems too dangerous to be */
817 /* useful. So does not casting the result. */
818# define GC_PTR_ADD(x, n) ((x)+(n))
819# endif
820#else /* !GC_DEBUG */
821# define GC_PTR_ADD3(x, n, type_of_result) ((x)+(n))
822# define GC_PTR_ADD(x, n) ((x)+(n))
823# define GC_PRE_INCR3(x, n, type_of_result) ((x) += (n))
824# define GC_PRE_INCR(x, n) ((x) += (n))
825# define GC_POST_INCR2(x, n, type_of_result) ((x)++)
826# define GC_POST_INCR(x, n) ((x)++)
827#endif
828
829/* Safer assignment of a pointer to a nonstack location. */
830#ifdef GC_DEBUG
831# ifdef __STDC__
832# define GC_PTR_STORE(p, q) \
833 (*(void **)GC_is_visible(p) = GC_is_valid_displacement(q))
834# else
835# define GC_PTR_STORE(p, q) \
836 (*(char **)GC_is_visible(p) = GC_is_valid_displacement(q))
837# endif
838#else /* !GC_DEBUG */
839# define GC_PTR_STORE(p, q) *((p) = (q))
840#endif
841
842/* Fynctions called to report pointer checking errors */
843GC_API void (*GC_same_obj_print_proc) GC_PROTO((GC_PTR p, GC_PTR q));
844
845GC_API void (*GC_is_valid_displacement_print_proc)
846 GC_PROTO((GC_PTR p));
847
848GC_API void (*GC_is_visible_print_proc)
849 GC_PROTO((GC_PTR p));
850
851
852/* For pthread support, we generally need to intercept a number of */
853/* thread library calls. We do that here by macro defining them. */
854
855#if !defined(GC_USE_LD_WRAP) && \
856 (defined(GC_PTHREADS) || defined(GC_SOLARIS_THREADS))
857# include "gc_pthread_redirects.h"
858#endif
859
860# if defined(PCR) || defined(GC_SOLARIS_THREADS) || \
861 defined(GC_PTHREADS) || defined(GC_WIN32_THREADS)
862 /* Any flavor of threads except SRC_M3. */
863/* This returns a list of objects, linked through their first */
864/* word. Its use can greatly reduce lock contention problems, since */
865/* the allocation lock can be acquired and released many fewer times. */
866/* lb must be large enough to hold the pointer field. */
867/* It is used internally by gc_local_alloc.h, which provides a simpler */
868/* programming interface on Linux. */
869GC_PTR GC_malloc_many(size_t lb);
870#define GC_NEXT(p) (*(GC_PTR *)(p)) /* Retrieve the next element */
871 /* in returned list. */
872extern void GC_thr_init(); /* Needed for Solaris/X86 */
873
874#endif /* THREADS && !SRC_M3 */
875
876#if defined(GC_WIN32_THREADS)
877# include <windows.h>
878
879 /*
880 * All threads must be created using GC_CreateThread, so that they will be
881 * recorded in the thread table.
882 */
883 HANDLE WINAPI GC_CreateThread(
884 LPSECURITY_ATTRIBUTES lpThreadAttributes,
885 DWORD dwStackSize, LPTHREAD_START_ROUTINE lpStartAddress,
886 LPVOID lpParameter, DWORD dwCreationFlags, LPDWORD lpThreadId );
887
888# if defined(_WIN32_WCE)
889 /*
890 * win32_threads.c implements the real WinMain, which will start a new thread
891 * to call GC_WinMain after initializing the garbage collector.
892 */
893 int WINAPI GC_WinMain(
894 HINSTANCE hInstance,
895 HINSTANCE hPrevInstance,
896 LPWSTR lpCmdLine,
897 int nCmdShow );
898
899# ifndef GC_BUILD
900# define WinMain GC_WinMain
901# define CreateThread GC_CreateThread
902# endif
903# endif /* defined(_WIN32_WCE) */
904
905#endif /* defined(GC_WIN32_THREADS) */
906
907/*
908 * If you are planning on putting
909 * the collector in a SunOS 5 dynamic library, you need to call GC_INIT()
910 * from the statically loaded program section.
911 * This circumvents a Solaris 2.X (X<=4) linker bug.
912 */
913#if defined(sparc) || defined(__sparc)
914# define GC_INIT() { extern end, etext; \
915 GC_noop(&end, &etext); }
916#else
917# if (defined(__CYGWIN32__) && defined(GC_USE_DLL)) || defined (_AIX)
918 /*
919 * Similarly gnu-win32 DLLs need explicit initialization
920 */
921# define GC_INIT() { GC_add_roots(DATASTART, DATAEND); }
922# else
923# define GC_INIT()
924# endif
925#endif
926
927#if !defined(_WIN32_WCE) \
928 && ((defined(_MSDOS) || defined(_MSC_VER)) && (_M_IX86 >= 300) \
929 || defined(_WIN32) && !defined(__CYGWIN32__) && !defined(__CYGWIN__))
930 /* win32S may not free all resources on process exit. */
931 /* This explicitly deallocates the heap. */
932 GC_API void GC_win32_free_heap ();
933#endif
934
935#if ( defined(_AMIGA) && !defined(GC_AMIGA_MAKINGLIB) )
936 /* Allocation really goes through GC_amiga_allocwrapper_do */
937# include "gc_amiga_redirects.h"
938#endif
939
940#if defined(GC_REDIRECT_TO_LOCAL) && !defined(GC_LOCAL_ALLOC_H)
941# include "gc_local_alloc.h"
942#endif
943
944#ifdef __cplusplus
945 } /* end of extern "C" */
946#endif
947
948#endif /* _GC_H */
Note: See TracBrowser for help on using the repository browser.