source: trunk/essentials/sys-devel/flex/ONEWS@ 3466

Changes between release 2.5.4 (11Sep96) and release 2.5.3:

        - Fixed a bug introduced in 2.5.3 that blew it when a call
          to input() occurred at the end of an input file.

        - Fixed scanner skeleton so the example in the man page of
          scanning strings using exclusive start conditions works.

        - Minor Makefile tweaks.


Changes between release 2.5.3 (29May96) and release 2.5.2:

        - Some serious bugs in yymore() have been fixed.  In particular,
          when using AT&T-lex-compatibility or %array, you can intermix
          calls to input(), unput(), and yymore().  (This still doesn't
          work for %pointer, and isn't likely to in the future.)

        - A bug in handling NUL's in the input stream of scanners using
          REJECT has been fixed.

        - The default main() in libfl.a now repeatedly calls yylex() until
          it returns 0, rather than just calling it once.

        - Minor tweak for Windows NT Makefile, MISC/NT/Makefile.


Changes between release 2.5.2 (25Apr95) and release 2.5.1:

        - The --prefix configuration option now works.

        - A bug that completely broke the "-Cf" table compression
          option has been fixed.

        - A major headache involving "const" declarators and Solaris
          systems has been fixed.

        - An octal escape sequence in a flex regular expression must
          now contain only the digits 0-7.

        - You can now use "--" on the flex command line to mark the
          end of flex options.

        - You can now specify the filename '-' as a synonym for stdin.

        - By default, the scanners generated by flex no longer
          statically initialize yyin and yyout to stdin and stdout.
          This change is necessary because in some ANSI environments,
          stdin and stdout are not compile-time constant.  You can
          force the initialization using "%option stdinit" in the first
          section of your flex input.

        - "%option nounput" now correctly omits the unput() routine
          from the output.

        - "make clean" now removes config.log, config.cache, and the
          flex binary.  The fact that it removes the flex binary means
          you should take care if making changes to scan.l, to make
          sure you don't wind up in a bootstrap problem.

        - In general, the Makefile has been reworked somewhat (thanks
          to Francois Pinard) for added flexibility - more changes will
          follow in subsequent releases.

        - The .texi and .info files in MISC/texinfo/ have been updated,
          thanks also to Francois Pinard.

        - The FlexLexer::yylex(istream* new_in, ostream* new_out) method
          now does not have a default for the first argument, to disambiguate
          it from FlexLexer::yylex().

        - A bug in destructing a FlexLexer object before doing any scanning
          with it has been fixed.

        - A problem with including FlexLexer.h multiple times has been fixed.

        - The alloca() chud necessary to accommodate bison has grown
          even uglier, but hopefully more correct.

        - A portability tweak has been added to accommodate compilers that
          use char* generic pointers.

        - EBCDIC contact information in the file MISC/EBCDIC has been updated.

        - An OS/2 Makefile and config.h for flex 2.5 is now available in
          MISC/OS2/, contributed by Kai Uwe Rommel.

        - The descrip.mms file for building flex under VMS has been updated,
          thanks to Pat Rankin.

        - The notes on building flex for the Amiga have been updated for
          flex 2.5, contributed by Andreas Scherer.


Changes between release 2.5.1 (28Mar95) and release 2.4.7:

        - A new concept of "start condition" scope has been introduced.
          A start condition scope is begun with:

                <SCs>{

          where SCs is a list of one or more start conditions.  Inside
          the start condition scope, every rule automatically has the
          prefix <SCs> applied to it, until a '}' which matches the
          initial '{'.  So, for example:

                <ESC>{
                        "\\n"   return '\n';
                        "\\r"   return '\r';
                        "\\f"   return '\f';
                        "\\0"   return '\0';
                }

          is equivalent to:

                <ESC>"\\n"      return '\n';
                <ESC>"\\r"      return '\r';
                <ESC>"\\f"      return '\f';
                <ESC>"\\0"      return '\0';

          As indicated in this example, rules inside start condition scopes
          (and any rule, actually, other than the first) can be indented,
          to better show the extent of the scope.

          Start condition scopes may be nested.

        - The new %option directive can be used in the first section of
          a flex scanner to control scanner-generation options.  Most
          options are given simply as names, optionally preceded by the
          word "no" (with no intervening whitespace) to negate their
          meaning.  Some are equivalent to flex flags, so putting them
          in your scanner source is equivalent to always specifying
          the flag (%option's take precedence over flags):

                7bit    -7 option
                8bit    -8 option
                align   -Ca option
                backup  -b option
                batch   -B option
                c++     -+ option
                caseful opposite of -i option (caseful is the default);
                case-sensitive  same as above
                caseless        -i option;
                case-insensitive        same as above
                debug   -d option
                default opposite of -s option
                ecs     -Ce option
                fast    -F option
                full    -f option
                interactive     -I option
                lex-compat      -l option
                meta-ecs        -Cm option
                perf-report     -p option
                read    -Cr option
                stdout  -t option
                verbose -v option
                warn    opposite of -w option (so use "%option nowarn" for -w)

                array   equivalent to "%array"
                pointer equivalent to "%pointer" (default)

          Some provide new features:

                always-interactive      generate a scanner which always
                        considers its input "interactive" (no call to isatty()
                        will be made when the scanner runs)
                main    supply a main program for the scanner, which
                        simply calls yylex().  Implies %option noyywrap.
                never-interactive       generate a scanner which never
                        considers its input "interactive" (no call to isatty()
                        will be made when the scanner runs)
                stack   if set, enable start condition stacks (see below)
                stdinit if unset ("%option nostdinit"), initialize yyin
                        and yyout statically to nil FILE* pointers, instead
                        of stdin and stdout
                yylineno        if set, keep track of the current line
                        number in global yylineno (this option is expensive
                        in terms of performance).  The line number is available
                        to C++ scanning objects via the new member function
                        lineno().
                yywrap  if unset ("%option noyywrap"), scanner does not
                        call yywrap() upon EOF but simply assumes there
                        are no more files to scan

          Flex scans your rule actions to determine whether you use the
          REJECT or yymore features (this is not new).  Two %options can be
          used to override its decision, either by setting them to indicate
          the feature is indeed used, or unsetting them to indicate it
          actually is not used:

                reject
                yymore

          Three %option's take string-delimited values, offset with '=':

                outfile="<name>"        equivalent to -o<name>
                prefix="<name>"         equivalent to -P<name>
                yyclass="<name>"        set the name of the C++ scanning class
                                        (see below)

          A number of %option's are available for lint purists who
          want to suppress the appearance of unneeded routines in
          the generated scanner.  Each of the following, if unset,
          results in the corresponding routine not appearing in the
          generated scanner:

                input, unput
                yy_push_state, yy_pop_state, yy_top_state
                yy_scan_buffer, yy_scan_bytes, yy_scan_string

          You can specify multiple options with a single %option directive,
          and multiple directives in the first section of your flex input file.

        - The new function:

                YY_BUFFER_STATE yy_scan_string( const char *str )

          returns a YY_BUFFER_STATE (which also becomes the current input
          buffer) for scanning the given string, which occurs starting
          with the next call to yylex().  The string must be NUL-terminated.
          A related function:

                YY_BUFFER_STATE yy_scan_bytes( const char *bytes, int len )

          creates a buffer for scanning "len" bytes (including possibly NUL's)
          starting at location "bytes".

          Note that both of these functions create and scan a *copy* of
          the string/bytes.  (This may be desirable, since yylex() modifies
          the contents of the buffer it is scanning.)  You can avoid the
          copy by using:

                YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )

          which scans in place the buffer starting at "base", consisting
          of "size" bytes, the last two bytes of which *must* be
          YY_END_OF_BUFFER_CHAR (these bytes are not scanned; thus, scanning
          consists of base[0] through base[size-2], inclusive).  If you
          fail to set up "base" in this manner, yy_scan_buffer returns a
          nil pointer instead of creating a new input buffer.

          The type yy_size_t is an integral type to which you can cast
          an integer expression reflecting the size of the buffer.

        - Three new routines are available for manipulating stacks of
          start conditions:

                void yy_push_state( int new_state )

          pushes the current start condition onto the top of the stack
          and BEGIN's "new_state" (recall that start condition names are
          also integers).

                void yy_pop_state()

          pops the top of the stack and BEGIN's to it, and

                int yy_top_state()

          returns the top of the stack without altering the stack's
          contents.

          The start condition stack grows dynamically and so has no built-in
          size limitation.  If memory is exhausted, program execution
          is aborted.

          To use start condition stacks, your scanner must include
          a "%option stack" directive.

        - flex now supports POSIX character class expressions.  These
          are expressions enclosed inside "[:" and ":]" delimiters (which
          themselves must appear between the '[' and ']' of a character
          class; other elements may occur inside the character class, too).
          The expressions flex recognizes are:

                [:alnum:] [:alpha:] [:blank:] [:cntrl:] [:digit:] [:graph:]     
                [:lower:] [:print:] [:punct:] [:space:] [:upper:] [:xdigit:]

          These expressions all designate a set of characters equivalent to
          the corresponding isXXX function (for example, [:alnum:] designates
          those characters for which isalnum() returns true - i.e., any
          alphabetic or numeric).  Some systems don't provide isblank(),
          so flex defines [:blank:] as a blank or a tab.

          For example, the following character classes are all equivalent:

                [[:alnum:]]
                [[:alpha:][:digit:]
                [[:alpha:]0-9]
                [a-zA-Z0-9]

          If your scanner is case-insensitive (-i flag), then [:upper:]
          and [:lower:] are equivalent to [:alpha:].

        - The promised rewrite of the C++ FlexLexer class has not yet
          been done.  Support for FlexLexer is limited at the moment to
          fixing show-stopper bugs, so, for example, the new functions
          yy_scan_string() & friends are not available to FlexLexer
          objects.

        - The new macro

                yy_set_interactive(is_interactive)

          can be used to control whether the current buffer is considered
          "interactive".  An interactive buffer is processed more slowly,
          but must be used when the scanner's input source is indeed
          interactive to avoid problems due to waiting to fill buffers
          (see the discussion of the -I flag in flex.1).  A non-zero value
          in the macro invocation marks the buffer as interactive, a zero
          value as non-interactive.  Note that use of this macro overrides
          "%option always-interactive" or "%option never-interactive".

          yy_set_interactive() must be invoked prior to beginning to
          scan the buffer.

        - The new macro

                yy_set_bol(at_bol)

          can be used to control whether the current buffer's scanning
          context for the next token match is done as though at the
          beginning of a line (non-zero macro argument; makes '^' anchored
          rules active) or not at the beginning of a line (zero argument,
          '^' rules inactive).

        - Related to this change, the mechanism for determining when a scan is
          starting at the beginning of a line has changed.  It used to be
          that '^' was active iff the character prior to that at which the
          scan started was a newline.  The mechanism now is that '^' is
          active iff the last token ended in a newline (or the last call to
          input() returned a newline).  For most users, the difference in
          mechanisms is negligible.  Where it will make a difference,
          however, is if unput() or yyless() is used to alter the input
          stream.  When in doubt, use yy_set_bol().

        - The new beginning-of-line mechanism involved changing some fairly
          twisted code, so it may have introduced bugs - beware ...

        - The macro YY_AT_BOL() returns true if the next token scanned from
          the current buffer will have '^' rules active, false otherwise.

        - The new function

                void yy_flush_buffer( struct yy_buffer_state* b )

          flushes the contents of the current buffer (i.e., next time
          the scanner attempts to match a token using b as the current
          buffer, it will begin by invoking YY_INPUT to fill the buffer).
          This routine is also available to C++ scanners (unlike some
          of the other new routines).

          The related macro

                YY_FLUSH_BUFFER

          flushes the contents of the current buffer.

        - A new "-ooutput" option writes the generated scanner to "output".
          If used with -t, the scanner is still written to stdout, but
          its internal #line directives (see previous item) use "output".

        - Flex now generates #line directives relating the code it
          produces to the output file; this means that error messages
          in the flex-generated code should be correctly pinpointed.

        - When generating #line directives, filenames with embedded '\'s
          have those characters escaped (i.e., turned into '\\').  This
          feature helps with reporting filenames for some MS-DOS and OS/2
          systems.

        - The FlexLexer class includes two new public member functions:

                virtual void switch_streams( istream* new_in = 0,
                                                ostream* new_out = 0 )

          reassigns yyin to new_in (if non-nil) and yyout to new_out
          (ditto), deleting the previous input buffer if yyin is
          reassigned.  It is used by:

                int yylex( istream* new_in = 0, ostream* new_out = 0 )

          which first calls switch_streams() and then returns the value
          of calling yylex().

        - C++ scanners now have yy_flex_debug as a member variable of
          FlexLexer rather than a global, and member functions for testing
          and setting it.

        - When generating a C++ scanning class, you can now use

                %option yyclass="foo"

          to inform flex that you have derived "foo" as a subclass of
          yyFlexLexer, so flex will place your actions in the member
          function foo::yylex() instead of yyFlexLexer::yylex().  It also
          generates a yyFlexLexer::yylex() member function that generates a
          run-time error if called (by invoking yyFlexLexer::LexerError()).
          This feature is necessary if your subclass "foo" introduces some
          additional member functions or variables that you need to access
          from yylex().

        - Current texinfo files in MISC/texinfo, contributed by Francois
          Pinard.

        - You can now change the name "flex" to something else (e.g., "lex")
          by redefining $(FLEX) in the Makefile.

        - Two bugs (one serious) that could cause "bigcheck" to fail have
          been fixed.

        - A number of portability/configuration changes have been made
          for easier portability.

        - You can use "YYSTATE" in your scanner as an alias for YY_START
          (for AT&T lex compatibility).

        - input() now maintains yylineno.

        - input() no longer trashes yytext.

        - interactive scanners now read characters in YY_INPUT up to a
          newline, a large performance gain.

        - C++ scanner objects now work with the -P option.  You include
          <FlexLexer.h> once per scanner - see comments in <FlexLexer.h>
          (or flex.1) for details.

        - C++ FlexLexer objects now use the "cerr" stream to report -d output
          instead of stdio.

        - The -c flag now has its full glorious POSIX interpretation (do
          nothing), rather than being interpreted as an old-style -C flag.

        - Scanners generated by flex now include two #define's giving
          the major and minor version numbers (YY_FLEX_MAJOR_VERSION,
          YY_FLEX_MINOR_VERSION).  These can then be tested to see
          whether certain flex features are available.

        - Scanners generated using -l lex compatibility now have the symbol
          YY_FLEX_LEX_COMPAT #define'd.

        - When initializing (i.e., yy_init is non-zero on entry to yylex()),
          generated scanners now set yy_init to zero before executing
          YY_USER_INIT.  This means that you can set yy_init back to a
          non-zero value in YY_USER_INIT if you need the scanner to be
          reinitialized on the next call.

        - You can now use "#line" directives in the first section of your
          scanner specification.

        - When generating full-table scanners (-Cf), flex now puts braces
          around each row of the 2-d array initialization, to silence warnings
          on over-zealous compilers.

        - Improved support for MS-DOS.  The flex sources have been successfully
          built, unmodified, for Borland 4.02 (all that's required is a
          Borland Makefile and config.h file, which are supplied in
          MISC/Borland - contributed by Terrence O Kane).

        - Improved support for Macintosh using Think C - the sources should
          build for this platform "out of the box".  Contributed by Scott
          Hofmann.

        - Improved support for VMS, in MISC/VMS/, contributed by Pat Rankin.

        - Support for the Amiga, in MISC/Amiga/, contributed by Andreas
          Scherer.  Note that the contributed files were developed for
          flex 2.4 and have not been tested with flex 2.5.

        - Some notes on support for the NeXT, in MISC/NeXT, contributed
          by Raf Schietekat.

        - The MISC/ directory now includes a preformatted version of flex.1
          in flex.man, and pre-yacc'd versions of parse.y in parse.{c,h}.

        - The flex.1 and flexdoc.1 manual pages have been merged.  There
          is now just one document, flex.1, which includes an overview
          at the beginning to help you find the section you need.

        - Documentation now clarifies that start conditions persist across
          switches to new input files or different input buffers.  If you
          want to e.g., return to INITIAL, you must explicitly do so.

        - The "Performance Considerations" section of the manual has been
          updated.

        - Documented the "yy_act" variable, which when YY_USER_ACTION is
          invoked holds the number of the matched rule, and added an
          example of using yy_act to profile how often each rule is matched.

        - Added YY_NUM_RULES, a definition that gives the total number
          of rules in the file, including the default rule (even if you
          use -s).

        - Documentation now clarifies that you can pass a nil FILE* pointer
          to yy_create_buffer() or yyrestart() if you've arrange YY_INPUT
          to not need yyin.

        - Documentation now clarifies that YY_BUFFER_STATE is a pointer to
          an opaque "struct yy_buffer_state".

        - Documentation now stresses that you gain the benefits of removing
          backing-up states only if you remove *all* of them.

        - Documentation now points out that traditional lex allows you
          to put the action on a separate line from the rule pattern if
          the pattern has trailing whitespace (ugh!), but flex doesn't
          support this.

        - A broken example in documentation of the difference between
          inclusive and exclusive start conditions is now fixed.

        - Usage (-h) report now goes to stdout.

        - Version (-V) info now goes to stdout.

        - More #ifdef chud has been added to the parser in attempt to
          deal with bison's use of alloca().

        - "make clean" no longer deletes emacs backup files (*~).

        - Some memory leaks have been fixed.

        - A bug was fixed in which dynamically-expanded buffers were
          reallocated a couple of bytes too small.

        - A bug was fixed which could cause flex to read and write beyond
          the end of the input buffer.

        - -S will not be going away.


Changes between release 2.4.7 (03Aug94) and release 2.4.6:

        - Fixed serious bug in reading multiple files.

        - Fixed bug in scanning NUL's.

        - Fixed bug in input() returning 8-bit characters.

        - Fixed bug in matching text with embedded NUL's when
          using %array or lex compatibility.

        - Fixed multiple invocations of YY_USER_ACTION when using '|'
          continuation action.

        - Minor prototyping fixes.

Changes between release 2.4.6 (04Jan94) and release 2.4.5:

        - Linking with -lfl no longer required if your program includes
          its own yywrap() and main() functions.  (This change will cause
          problems if you have a non-ANSI compiler on a system for which
          sizeof(int) != sizeof(void*) or sizeof(int) != sizeof(size_t).)

        - The use of 'extern "C++"' in FlexLexer.h has been modified to
          get around an incompatibility with g++'s header files.

Changes between release 2.4.5 (11Dec93) and release 2.4.4:

        - Fixed bug breaking C++ scanners that use REJECT or variable
          trailing context.

        - Fixed serious input problem for interactive scanners on
          systems for which char is unsigned.

        - Fixed bug in incorrectly treating '$' operator as variable
          trailing context.

        - Fixed bug in -CF table representation that could lead to
          corrupt tables.

        - Fixed fairly benign memory leak.

        - Added `extern "C++"' wrapper to FlexLexer.h header.  This
          should overcome the g++ 2.5.X problems mentioned in the
          NEWS for release 2.4.3.

        - Changed #include of FlexLexer.h to use <> instead of "".

        - Added feature to control whether the scanner attempts to
          refill the input buffer once it's exhausted.  This feature
          will be documented in the 2.5 release.


Changes between release 2.4.4 (07Dec93) and release 2.4.3:

        - Fixed two serious bugs in scanning 8-bit characters.

        - Fixed bug in YY_USER_ACTION that caused it to be executed
          inappropriately (on the scanner's own internal actions, and
          with incorrect yytext/yyleng values).

        - Fixed bug in pointing yyin at a new file and resuming scanning.

        - Portability fix regarding min/max/abs macros conflicting with
          function definitions in standard header files.

        - Added a virtual LexerError() method to the C++ yyFlexLexer class
          for reporting error messages instead of always using cerr.

        - Added warning in flexdoc that the C++ scanning class is presently
          experimental and subject to considerable change between major
          releases.


Changes between release 2.4.3 (03Dec93) and release 2.4.2:

        - Fixed bug causing fatal scanner messages to fail to print.

        - Fixed things so FlexLexer.h can be included in other C++
          sources.  One side-effect of this change is that -+ and -CF
          are now incompatible.

        - libfl.a now supplies private versions of the the <string.h>/
          <strings.h> string routines needed by flex and the scanners
          it generates, to enhance portability to some BSD systems.

        - More robust solution to 2.4.2's flexfatal() bug fix.

        - Added ranlib of installed libfl.a.

        - Some lint tweaks.

        - NOTE: problems have been encountered attempting to build flex
          C++ scanners using g++ version 2.5.X.  The problem is due to an
          unfortunate heuristic in g++ 2.5.X that attempts to discern between
          C and C++ headers.  Because FlexLexer.h is installed (by default)
          in /usr/local/include and not /usr/local/lib/g++-include, g++ 2.5.X
          decides that it's a C header :-(.  So if you have problems, install
          the header in /usr/local/lib/g++-include instead.


Changes between release 2.4.2 (01Dec93) and release 2.4.1:

        - Fixed bug in libfl.a referring to non-existent "flexfatal" function.

        - Modified to produce both compress'd and gzip'd tar files for
          distributions (you probably don't care about this change!).


Changes between release 2.4.1 (30Nov93) and release 2.3.8:

        - The new '-+' flag instructs flex to generate a C++ scanner class
          (thanks to Kent Williams).  flex writes an implementation of the
          class defined in FlexLexer.h to lex.yy.cc.  You may include
          multiple scanner classes in your program using the -P flag.  Note
          that the scanner class also provides a mechanism for creating
          reentrant scanners.  The scanner class uses C++ streams for I/O
          instead of FILE*'s (thanks to Tom Epperly).  If the flex executable's
          name ends in '+' then the '-+' flag is automatically on, so creating
          a symlink or copy of "flex" to "flex++" results in a version of
          flex that can be used exclusively for C++ scanners.

          Note that without the '-+' flag, flex-generated scanners can still
          be compiled using C++ compilers, though they use FILE*'s for I/O
          instead of streams.

          See the "GENERATING C++ SCANNERS" section of flexdoc for details.

        - The new '-l' flag turns on maximum AT&T lex compatibility.  In
          particular, -l includes support for "yylineno" and makes yytext
          be an array instead of a pointer.  It does not, however, do away
          with all incompatibilities.  See the "INCOMPATIBILITIES WITH LEX
          AND POSIX" section of flexdoc for details.

        - The new '-P' option specifies a prefix to use other than "yy"
          for the scanner's globally-visible variables, and for the
          "lex.yy.c" filename.  Using -P you can link together multiple
          flex scanners in the same executable.

        - The distribution includes a "texinfo" version of flexdoc.1,
          contributed by Roland Pesch (thanks also to Marq Kole, who
          contributed another version).  It has not been brought up to
          date, but reflects version 2.3.  See MISC/flex.texinfo.

          The flex distribution will soon include G.T. Nicol's flex
          manual; he is presently bringing it up-to-date for version 2.4.

        - yywrap() is now a function, and you now *must* link flex scanners
          with libfl.a.

        - Site-configuration is now done via an autoconf-generated
          "configure" script contributed by Francois Pinard.

        - Scanners now use fread() (or getc(), if interactive) and not
          read() for input.  A new "table compression" option, -Cr,
          overrides this change and causes the scanner to use read()
          (because read() is a bit faster than fread()).  -f and -F
          are now equivalent to -Cfr and -CFr; i.e., they imply the
          -Cr option.

        - In the blessed name of POSIX compliance, flex supports "%array"
          and "%pointer" directives in the definitions (first) section of
          the scanner specification.  The former specifies that yytext
          should be an array (of size YYLMAX), the latter, that it should
          be a pointer.  The array version of yytext is universally slower
          than the pointer version, but has the advantage that its contents
          remain unmodified across calls to input() and unput() (the pointer
          version of yytext is, still, trashed by such calls).

          "%array" cannot be used with the '-+' C++ scanner class option.

        - The new '-Ca' option directs flex to trade off memory for
          natural alignment when generating a scanner's tables.  In
          particular, table entries that would otherwise be "short"
          become "long".

        - The new '-h' option produces a summary of the flex flags.

        - The new '-V' option reports the flex version number and exits.

        - The new scanner macro YY_START returns an integer value
          corresponding to the current start condition.  You can return
          to that start condition by passing the value to a subsequent
          "BEGIN" action.  You also can implement "start condition stacks"
          by storing the values in an integer stack.

        - You can now redefine macros such as YY_INPUT by just #define'ing
          them to some other value in the first section of the flex input;
          no need to first #undef them.

        - flex now generates warnings for rules that can't be matched.
          These warnings can be turned off using the new '-w' flag.  If
          your scanner uses REJECT then you will not get these warnings.

        - If you specify the '-s' flag but the default rule can be matched,
          flex now generates a warning.

        - "yyleng" is now a global, and may be modified by the user (though
          doing so and then using yymore() will yield weird results).

        - Name definitions in the first section of a scanner specification
          can now include a leading '^' or trailing '$' operator.  In this
          case, the definition is *not* pushed back inside of parentheses.

        - Scanners with compressed tables are now "interactive" (-I option)
          by default.  You can suppress this attribute (which makes them
          run slightly slower) using the new '-B' flag.

        - Flex now generates 8-bit scanners by default, unless you use the
          -Cf or -CF compression options (-Cfe  and -CFe result in 8-bit
          scanners).  You can force it to generate a 7-bit scanner using
          the new '-7' flag.  You can build flex to generate 8-bit scanners
          for -Cf and -CF, too, by adding -DDEFAULT_CSIZE=256 to CFLAGS
          in the Makefile.

        - You no longer need to call the scanner routine yyrestart() to
          inform the scanner that you have switched to a new file after
          having seen an EOF on the current input file.  Instead, just
          point yyin at the new file and continue scanning.

        - You no longer need to invoke YY_NEW_FILE in an <<EOF>> action
          to indicate you wish to continue scanning.  Simply point yyin
          at a new file.

        - A leading '#' no longer introduces a comment in a flex input.

        - flex no longer considers formfeed ('\f') a whitespace character.

        - %t, I'm happy to report, has been nuked.

        - The '-p' option may be given twice ('-pp') to instruct flex to
          report minor performance problems as well as major ones.

        - The '-v' verbose output no longer includes start/finish time
          information.

        - Newlines in flex inputs can optionally include leading or
          trailing carriage-returns ('\r'), in support of several PC/Mac
          run-time libraries that automatically include these.

        - A start condition of the form "<*>" makes the following rule
          active in every start condition, whether exclusive or inclusive.

        - The following items have been corrected in the flex documentation:

                - '-C' table compression options *are* cumulative.

                - You may modify yytext but not lengthen it by appending
                  characters to the end.  Modifying its final character
                  will affect '^' anchoring for the next rule matched
                  if the character is changed to or from a newline.

                - The term "backtracking" has been renamed "backing up",
                  since it is a one-time repositioning and not a repeated
                  search.  What used to be the "lex.backtrack" file is now
                  "lex.backup".

                - Unindented "/* ... */" comments are allowed in the first
                  flex input section, but not in the second.

                - yyless() can only be used in the flex input source, not
                  externally.

                - You can use "yyrestart(yyin)" to throw away the
                  current contents of the input buffer.

                - To write high-speed scanners, attempt to match as much
                  text as possible with each rule.  See MISC/fastwc/README
                  for more information.

                - Using the beginning-of-line operator ('^') is fairly
                  cheap.  Using unput() is expensive.  Using yyless() is
                  cheap.

                - An example of scanning strings with embedded escape
                  sequences has been added.

                - The example of backing-up in flexdoc was erroneous; it
                  has been corrected.

        - A flex scanner's internal buffer now dynamically grows if needed
          to match large tokens.  Note that growing the buffer presently
          requires rescanning the (large) token, so consuming a lot of
          text this way is a slow process.  Also note that presently the
          buffer does *not* grow if you unput() more text than can fit
          into the buffer.

        - The MISC/ directory has been reorganized; see MISC/README for
          details.

        - yyless() can now be used in the third (user action) section
          of a scanner specification, thanks to Ceriel Jacobs.  yyless()
          remains a macro and cannot be used outside of the scanner source.

        - The skeleton file is no longer opened at run-time, but instead
          compiled into a large string array (thanks to John Gilmore and
          friends at Cygnus).  You can still use the -S flag to point flex
          at a different skeleton file.

        - flex no longer uses a temporary file to store the scanner's
          actions.

        - A number of changes have been made to decrease porting headaches.
          In particular, flex no longer uses memset() or ctime(), and
          provides a single simple mechanism for dealing with C compilers
          that still define malloc() as returning char* instead of void*.

        - Flex now detects if the scanner specification requires the -8 flag
          but the flag was not given or on by default.

        - A number of table-expansion fencepost bugs have been fixed,
          making flex more robust for generating large scanners.

        - flex more consistently identifies the location of errors in
          its input.

        - YY_USER_ACTION is now invoked only for "real" actions, not for
          internal actions used by the scanner for things like filling
          the buffer or handling EOF.

        - The rule "[^]]" now matches any character other than a ']';
          formerly it matched any character at all followed by a ']'.
          This change was made for compatibility with AT&T lex.

        - A large number of miscellaneous bugs have been found and fixed
          thanks to Gerhard Wilhelms.

        - The source code has been heavily reformatted, making patches
          relative to previous flex releases no longer accurate.


Changes between 2.3 Patch #8 (21Feb93) and 2.3 Patch #7:

        - Fixed bugs in dynamic memory allocation leading to grievous
          fencepost problems when generating large scanners.
        - Fixed bug causing infinite loops on character classes with 8-bit
          characters in them.
        - Fixed bug in matching repetitions with a lower bound of 0.
        - Fixed bug in scanning NUL characters using an "interactive" scanner.
        - Fixed bug in using yymore() at the end of a file.
        - Fixed bug in misrecognizing rules with variable trailing context.
        - Fixed bug compiling flex on Suns using gcc 2.
        - Fixed bug in not recognizing that input files with the character
          ASCII 128 in them require the -8 flag.
        - Fixed bug that could cause an infinite loop writing out
          error messages.
        - Fixed bug in not recognizing old-style lex % declarations if
          followed by a tab instead of a space.
        - Fixed potential crash when flex terminated early (usually due
          to a bad flag) and the -v flag had been given.
        - Added some missing declarations of void functions.
        - Changed to only use '\a' for __STDC__ compilers.
        - Updated mailing addresses.


Changes between 2.3 Patch #7 (28Mar91) and 2.3 Patch #6:

        - Fixed out-of-bounds array access that caused bad tables
          to be produced on machines where the bad reference happened
          to yield a 1.  This caused problems installing or running
          flex on some Suns, in particular.


Changes between 2.3 Patch #6 (29Aug90) and 2.3 Patch #5:

        - Fixed a serious bug in yymore() which basically made it
          completely broken.  Thanks goes to Jean Christophe of
          the Nethack development team for finding the problem
          and passing along the fix.


Changes between 2.3 Patch #5 (16Aug90) and 2.3 Patch #4:

        - An up-to-date version of initscan.c so "make test" will
          work after applying the previous patches


Changes between 2.3 Patch #4 (14Aug90) and 2.3 Patch #3:

        - Fixed bug in hexadecimal escapes which allowed only digits,
          not letters, in escapes
        - Fixed bug in previous "Changes" file!


Changes between 2.3 Patch #3 (03Aug90) and 2.3 Patch #2:

        - Correction to patch #2 for gcc compilation; thanks goes to
          Paul Eggert for catching this.


Changes between 2.3 Patch #2 (02Aug90) and original 2.3 release:

        - Fixed (hopefully) headaches involving declaring malloc()
          and free() for gcc, which defines __STDC__ but (often) doesn't
          come with the standard include files such as <stdlib.h>.
          Reordered #ifdef maze in the scanner skeleton in the hope of
          getting the declarations right for cfront and g++, too.

        - Note that this patch supercedes patch #1 for release 2.3,
          which was never announced but was available briefly for
          anonymous ftp.


Changes between 2.3 (full) release of 28Jun90 and 2.2 (alpha) release:

User-visible:

        - A lone <<EOF>> rule (that is, one which is not qualified with
          a list of start conditions) now specifies the EOF action for
          *all* start conditions which haven't already had <<EOF>> actions
          given.  To specify an end-of-file action for just the initial
          state, use <INITIAL><<EOF>>.

        - -d debug output is now contigent on the global yy_flex_debug
          being set to a non-zero value, which it is by default.

        - A new macro, YY_USER_INIT, is provided for the user to specify
          initialization action to be taken on the first call to the
          scanner.  This action is done before the scanner does its
          own initialization.

        - yy_new_buffer() has been added as an alias for yy_create_buffer()

        - Comments beginning with '#' and extending to the end of the line
          now work, but have been deprecated (in anticipation of making
          flex recognize #line directives).

        - The funky restrictions on when semi-colons could follow the
          YY_NEW_FILE and yyless macros have been removed.  They now
          behave identically to functions.

        - A bug in the sample redefinition of YY_INPUT in the documentation
          has been corrected.

        - A bug in the sample simple tokener in the documentation has
          been corrected.

        - The documentation on the incompatibilities between flex and
          lex has been reordered so that the discussion of yylineno
          and input() come first, as it's anticipated that these will
          be the most common source of headaches.


Things which didn't used to be documented but now are:

        - flex interprets "^foo|bar" differently from lex.  flex interprets
          it as "match either a 'foo' or a 'bar', providing it comes at the
          beginning of a line", whereas lex interprets it as "match either
          a 'foo' at the beginning of a line, or a 'bar' anywhere".

        - flex initializes the global "yyin" on the first call to the
          scanner, while lex initializes it at compile-time.

        - yy_switch_to_buffer() can be used in the yywrap() macro/routine.

        - flex scanners do not use stdio for their input, and hence when
          writing an interactive scanner one must explictly call fflush()
          after writing out a prompt.

        - flex scanner can be made reentrant (after a fashion) by using
          "yyrestart( yyin );".  This is useful for interactive scanners
          which have interrupt handlers that long-jump out of the scanner.

        - a defense of why yylineno is not supported is included, along
          with a suggestion on how to convert scanners which rely on it.


Other changes:

        - Prototypes and proper declarations of void routines have
          been added to the flex source code, courtesy of Kevin B. Kenny.

        - Routines dealing with memory allocation now use void* pointers
          instead of char* - see Makefile for porting implications.

        - Error-checking is now done when flex closes a file.

        - Various lint tweaks were added to reduce the number of gripes.

        - Makefile has been further parameterized to aid in porting.

        - Support for SCO Unix added.

        - Flex now sports the latest & greatest UC copyright notice
          (which is only slightly different from the previous one).

        - A note has been added to flexdoc.1 mentioning work in progress
          on modifying flex to generate straight C code rather than a
          table-driven automaton, with an email address of whom to contact
          if you are working along similar lines.


Changes between 2.2 Patch #3 (30Mar90) and 2.2 Patch #2:

        - fixed bug which caused -I scanners to bomb


Changes between 2.2 Patch #2 (27Mar90) and 2.2 Patch #1:

        - fixed bug writing past end of input buffer in yyunput()
        - fixed bug detecting NUL's at the end of a buffer


Changes between 2.2 Patch #1 (23Mar90) and 2.2 (alpha) release:

        - Makefile fixes: definition of MAKE variable for systems
          which don't have it; installation of flexdoc.1 along with
          flex.1; fixed two bugs which could cause "bigtest" to fail.

        - flex.skel fix for compiling with g++.

        - README and flexdoc.1 no longer list an out-of-date BITNET address
          for contacting me.

        - minor typos and formatting changes to flex.1 and flexdoc.1.


Changes between 2.2 (alpha) release of March '90 and previous release:

User-visible:

        - Full user documentation now available.

        - Support for 8-bit scanners.

        - Scanners now accept NUL's.

        - A facility has been added for dealing with multiple
          input buffers.

        - Two manual entries now.  One which fully describes flex
          (rather than just its differences from lex), and the
          other for quick(er) reference.

        - A number of changes to bring flex closer into compliance
          with the latest POSIX lex draft:

                %t support
                flex now accepts multiple input files and concatenates
                    them together to form its input
                previous -c (compress) flag renamed -C
                do-nothing -c and -n flags added
                Any indented code or code within %{}'s in section 2 is
                    now copied to the output

        - yyleng is now a bona fide global integer.

        - -d debug information now gives the line number of the
          matched rule instead of which number rule it was from
          the beginning of the file.

        - -v output now includes a summary of the flags used to generate
          the scanner.

        - unput() and yyrestart() are now globally callable.

        - yyrestart() no longer closes the previous value of yyin.

        - C++ support; generated scanners can be compiled with C++ compiler.

        - Primitive -lfl library added, containing default main()
          which calls yylex().  A number of routines currently living
          in the scanner skeleton will probably migrate to here
          in the future (in particular, yywrap() will probably cease
          to be a macro and instead be a function in the -lfl library).

        - Hexadecimal (\x) escape sequences added.

        - Support for MS-DOS, VMS, and Turbo-C integrated.

        - The %used/%unused operators have been deprecated.  They
          may go away soon.


Other changes:

        - Makefile enhanced for easier testing and installation.
        - The parser has been tweaked to detect some erroneous
          constructions which previously were missed.
        - Scanner input buffer overflow is now detected.
        - Bugs with missing "const" declarations fixed.
        - Out-of-date Minix/Atari patches provided.
        - Scanners no longer require printf() unless FLEX_DEBUG is being used.
        - A subtle input() bug has been fixed.
        - Line numbers for "continued action" rules (those following
          the special '|' action) are now correct.
        - unput() bug fixed; had been causing problems porting flex to VMS.
        - yymore() handling rewritten to fix bug with interaction
          between yymore() and trailing context.
        - EOF in actions now generates an error message.
        - Bug involving -CFe and generating equivalence classes fixed.
        - Bug which made -CF be treated as -Cf fixed.
        - Support for SysV tmpnam() added.
        - Unused #define's for scanner no longer generated.
        - Error messages which are associated with a particular input
          line are now all identified with their input line in standard
          format.
        - % directives which are valid to lex but not to flex are
          now ignored instead of generating warnings.
        - -DSYS_V flag can now also be specified -DUSG for System V
          compilation.


Changes between 2.1 beta-test release of June '89 and previous release:

User-visible:

        - -p flag generates a performance report to stderr.  The report
          consists of comments regarding features of the scanner rules
          which result in slower scanners.

        - -b flag generates backtracking information to lex.backtrack.
          This is a list of scanner states which require backtracking
          and the characters on which they do so.  By adding rules
          one can remove backtracking states.  If all backtracking states
          are eliminated, the generated scanner will run faster.
          Backtracking is not yet documented in the manual entry.

        - Variable trailing context now works, i.e., one can have
          rules like "(foo)*/[ \t]*bletch".  Some trailing context
          patterns still cannot be properly matched and generate
          error messages.  These are patterns where the ending of the
          first part of the rule matches the beginning of the second
          part, such as "zx*/xy*", where the 'x*' matches the 'x' at
          the beginning of the trailing context.  Lex won't get these
          patterns right either.

        - Faster scanners.

        - End-of-file rules.  The special rule "<<EOF>>" indicates
          actions which are to be taken when an end-of-file is
          encountered and yywrap() returns non-zero (i.e., indicates
          no further files to process).  See manual entry for example.

        - The -r (reject used) flag is gone.  flex now scans the input
          for occurrences of the string "REJECT" to determine if the
          action is needed.  It tries to be intelligent about this but
          can be fooled.  One can force the presence or absence of
          REJECT by adding a line in the first section of the form
          "%used REJECT" or "%unused REJECT".

        - yymore() has been implemented.  Similarly to REJECT, flex
          detects the use of yymore(), which can be overridden using
          "%used" or "%unused".

        - Patterns like "x{0,3}" now work (i.e., with lower-limit == 0).

        - Removed '\^x' for ctrl-x misfeature.

        - Added '\a' and '\v' escape sequences.

        - \<digits> now works for octal escape sequences; previously
          \0<digits> was required.

        - Better error reporting; line numbers are associated with rules.

        - yyleng is a macro; it cannot be accessed outside of the
          scanner source file.

        - yytext and yyleng should not be modified within a flex action.

        - Generated scanners #define the name FLEX_SCANNER.

        - Rules are internally separated by YY_BREAK in lex.yy.c rather
          than break, to allow redefinition.

        - The macro YY_USER_ACTION can be redefined to provide an action
          which is always executed prior to the matched rule's action.
        
        - yyrestart() is a new action which can be used to restart
          the scanner after it has seen an end-of-file (a "real" one,
          that is, one for which yywrap() returned non-zero).  It takes
          a FILE* argument indicating a new file to scan and sets
          things up so that a subsequent call to yylex() will start
          scanning that file.

        - Internal scanner names all preceded by "yy_"

        - lex.yy.c is deleted if errors are encountered during processing.

        - Comments may be put in the first section of the input by preceding
          them with '#'.



Other changes:

        - Some portability-related bugs fixed, in particular for machines
          with unsigned characters or sizeof( int* ) != sizeof( int ).
          Also, tweaks for VMS and Microsoft C (MS-DOS), and identifiers all
          trimmed to be 31 or fewer characters.  Shortened file names
          for dinosaur OS's.  Checks for allocating > 64K memory
          on 16 bit'ers.  Amiga tweaks.  Compiles using gcc on a Sun-3.
        - Compressed and fast scanner skeletons merged.
        - Skeleton header files done away with.
        - Generated scanner uses prototypes and "const" for __STDC__.
        - -DSV flag is now -DSYS_V for System V compilation.
        - Removed all references to FTL language.
        - Software now covered by BSD Copyright.
        - flex will replace lex in subsequent BSD releases.