source: trunk/essentials/sys-devel/automake-1.8/aclocal.in@ 3466

Last change on this file since 3466 was 3142, checked in by bird, 19 years ago

Unixroot.
File size: 19.3 KB
Line 
1#!@PERL@
2# -*- perl -*-
3# @configure_input@
4
5eval 'case $# in 0) exec @PERL@ -S "$0";; *) exec @PERL@ -S "$0" "$@";; esac'
6 if 0;
7
8# aclocal - create aclocal.m4 by scanning configure.ac
9
10# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
11# Free Software Foundation, Inc.
12
13# This program is free software; you can redistribute it and/or modify
14# it under the terms of the GNU General Public License as published by
15# the Free Software Foundation; either version 2, or (at your option)
16# any later version.
17
18# This program is distributed in the hope that it will be useful,
19# but WITHOUT ANY WARRANTY; without even the implied warranty of
20# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21# GNU General Public License for more details.
22
23# You should have received a copy of the GNU General Public License
24# along with this program; if not, write to the Free Software
25# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
26# 02111-1307, USA.
27
28# Written by Tom Tromey <tromey@redhat.com>.
29
30BEGIN
31{
32 my $perllibdir = $ENV{'perllibdir'} || $ENV{'UNIXROOT'}.'@datadir@/@PACKAGE@-@APIVERSION@';
33 $perllibdir =~ s/$ENV{'UNIXROOT'}\/\@unixroot/$ENV{'UNIXROOT'}/; # The EMX built perl doesn't know @unixroot.
34 $perllibdir =~ s/\/\@unixroot/$ENV{'UNIXROOT'}/; # The EMX built perl doesn't know @unixroot.
35 unshift @INC, (split '@PATH_SEPARATOR@', $perllibdir);
36}
37
38use Automake::Config;
39use Automake::General;
40use Automake::Configure_ac;
41use Automake::Channels;
42use Automake::XFile;
43use Automake::FileUtils;
44use File::Basename;
45use File::stat;
46use Cwd;
47
48# Note that this isn't pkgdatadir, but a separate directory.
49# Note also that the versioned directory is handled later.
50$acdir = $ENV{'UNIXROOT'}.'@datadir@/aclocal';
51$acdir =~ s/$ENV{'UNIXROOT'}\/\@unixroot/$ENV{'UNIXROOT'}/; # The EMX built perl doesn't know @unixroot.
52$acdir =~ s/\/\@unixroot/$ENV{'UNIXROOT'}/; # The EMX built perl doesn't know @unixroot.
53$default_acdir = $acdir;
54# contains a list of directories, one per line, to be added
55# to the dirlist in addition to $acdir, as if -I had been
56# added to the command line. If acdir has been redirected,
57# we will also check the specified acdir (this is done later).
58$default_dirlist = "$default_acdir/dirlist";
59
60# Some globals.
61
62# configure.ac or configure.in.
63my $configure_ac;
64
65# Output file name.
66$output_file = 'aclocal.m4';
67
68# Modification time of the youngest dependency.
69$greatest_mtime = 0;
70
71# Option --force.
72$force_output = 0;
73
74# Which macros have been seen.
75%macro_seen = ();
76
77# Which files have been seen.
78%file_seen = ();
79
80# Remember the order into which we scanned the files.
81# It's important to output the contents of aclocal.m4 in the opposite order.
82# (Definitions in first files we have scanned should override those from
83# later files. So they must appear last in the output.)
84@file_order = ();
85
86# Map macro names to file names.
87%map = ();
88
89# Map file names to file contents.
90%file_contents = ();
91
92# Map file names to included files (transitively closed).
93%file_includes = ();
94
95# How much to say.
96$verbose = 0;
97
98# Matches a macro definition.
99# AC_DEFUN([macroname], ...)
100# or
101# AC_DEFUN(macroname, ...)
102# When macroname is `['-quoted , we accept any character in the name,
103# except `]'. Otherwise macroname stops on the first `]', `,', `)',
104# or `\n' encountered.
105$ac_defun_rx = "A[CU]_DEFUN\\((?:\\[([^]]+)\\]|([^],)\n]+))";
106
107# Matches an AC_REQUIRE line.
108$ac_require_rx = "AC_REQUIRE\\((?:\\[([^]]+)\\]|([^],)\n]+))\\)";
109
110# Matches an m4_include line
111$m4_include_rx = "(?:m4_)?s?include\\((?:\\[([^]]+)\\]|([^],)\n]+))\\)";
112
113
114
115################################################################
116
117# Check macros in acinclude.m4. If one is not used, warn.
118sub check_acinclude ()
119{
120 foreach my $key (keys %map)
121 {
122 # FIXME: should print line number of acinclude.m4.
123 warn ("aclocal: warning: macro `$key' defined in "
124 . "acinclude.m4 but never used\n")
125 if $map{$key} eq 'acinclude.m4' && ! $macro_seen{$key};
126 }
127}
128
129################################################################
130
131# Scan all the installed m4 files and construct a map.
132sub scan_m4_files (@)
133{
134 local (@dirlist) = @_;
135
136 # First, scan configure.ac. It may contain macro definitions,
137 # or may include other files that define macros.
138 &scan_file ($configure_ac);
139
140 # Then, scan acinclude.m4 if it exists.
141 if (-f 'acinclude.m4')
142 {
143 &scan_file ('acinclude.m4');
144 }
145
146 # Finally, scan all files in our search path.
147 local ($m4dir);
148 foreach $m4dir (@dirlist)
149 {
150 if (! opendir (DIR, $m4dir))
151 {
152 print STDERR "aclocal: couldn't open directory `$m4dir': $!\n";
153 exit 1;
154 }
155
156 local ($file, $fullfile);
157 # We reverse the directory contents so that foo2.m4 gets
158 # used in preference to foo1.m4.
159 foreach $file (reverse sort grep (! /^\./, readdir (DIR)))
160 {
161 # Only examine .m4 files.
162 next unless $file =~ /\.m4$/;
163
164 # Skip some files when running out of srcdir.
165 next if $file eq 'aclocal.m4';
166
167 $fullfile = $m4dir . '/' . $file;
168 &scan_file ($fullfile);
169 }
170 closedir (DIR);
171 }
172
173 # Construct a new function that does the searching. We use a
174 # function (instead of just evaluating $search in the loop) so that
175 # "die" is correctly and easily propagated if run.
176 my $search = "sub search {\nmy \$found = 0;\n";
177 foreach my $key (reverse sort keys %map)
178 {
179 $search .= ('if (/\b\Q' . $key . '\E(?!\w)/) { & add_macro ("' . $key
180 . '"); $found = 1; }' . "\n");
181 }
182 $search .= "return \$found;\n};\n";
183 eval $search;
184 die "internal error: $@\n search is $search" if $@;
185}
186
187################################################################
188
189# Add a macro to the output.
190sub add_macro ($)
191{
192 local ($macro) = @_;
193
194 # We want to ignore AC_ macros. However, if an AC_ macro is
195 # defined in (eg) acinclude.m4, then we want to make sure we mark
196 # it as seen.
197 return if $macro =~ /^AC_/ && ! defined $map{$macro};
198
199 if (! defined $map{$macro})
200 {
201 warn "aclocal: macro `$macro' required but not defined\n";
202 $exit_code = 1;
203 return;
204 }
205
206 print STDERR "aclocal: saw macro $macro\n" if $verbose;
207 $macro_seen{$macro} = 1;
208 &add_file ($map{$macro});
209}
210
211# rel2abs ($file, $directory)
212# ---------------------------
213# Similar to File::Spec->rel2abs ($file, $directory), but
214# work with Perl 5.005. (File::Spec->rel2abs is available
215# only in Perl 5.6.)
216# Remove this once we require 5.6.
217sub rel2abs ($$)
218{
219 my ($file, $dir) = @_;
220 if (! File::Spec->file_name_is_absolute ($file))
221 {
222 $dir = cwd () . "/$dir"
223 unless File::Spec->file_name_is_absolute ($dir);
224 $file = "$dir/$file";
225 }
226 $file = File::Spec->canonpath ($file);
227 return $file;
228}
229
230# scan_configure_dep ($file)
231# --------------------------
232# Scan a configure dependency (configure.ac, or separate m4 files)
233# for uses of know macros and AC_REQUIREs of possibly unknown macros.
234# Recursively scan m4_included files.
235my %scanned_configure_dep = ();
236sub scan_configure_dep ($)
237{
238 my ($file) = @_;
239 # Do not scan a file twice.
240 return ()
241 if exists $scanned_configure_dep{$file};
242 $scanned_configure_dep{$file} = 1;
243
244 my $mtime = mtime $file;
245 $greatest_mtime = $mtime if $greatest_mtime < $mtime;
246
247 my $contents = exists $file_contents{$file} ?
248 $file_contents{$file} : contents $file;
249
250 my $line = 0;
251 my @rlist = ();
252 my @ilist = ();
253 foreach (split ("\n", $contents))
254 {
255 ++$line;
256 # Remove comments from current line.
257 s/\bdnl\b.*$//;
258 s/\#.*$//;
259
260 while (/$m4_include_rx/go)
261 {
262 push (@ilist, $1 || $2);
263 }
264
265 while (/$ac_require_rx/go)
266 {
267 push (@rlist, $1 || $2);
268 }
269
270 # The search function is constructed dynamically by
271 # scan_m4_files. The last parenthetical match makes sure we
272 # don't match things that look like macro assignments or
273 # AC_SUBSTs.
274 if (! &search && /(^|\s+)(AM_[A-Z0-9_]+)($|[^\]\)=A-Z0-9_])/)
275 {
276 # Macro not found, but AM_ prefix found.
277 warn "aclocal: $file: $line: macro `$2' not found in library\n";
278 $exit_code = 1;
279 }
280 }
281
282 add_macro ($_) foreach (@rlist);
283 my $dirname = dirname $file;
284 &scan_configure_dep (rel2abs ($_, $dirname)) foreach (@ilist);
285}
286
287# Add a file to output.
288sub add_file ($)
289{
290 local ($file) = @_;
291
292 # Only add a file once.
293 return if ($file_seen{$file});
294 $file_seen{$file} = 1;
295
296 scan_configure_dep $file;
297}
298
299# Point to the documentation for underquoted AC_DEFUN only once.
300my $underquoted_manual_once = 0;
301
302# Scan a single M4 file, and all files it includes.
303# Return the list of included files.
304sub scan_file ($)
305{
306 my ($file) = @_;
307 my $base = dirname $file;
308
309 # Do not scan the same file twice.
310 return @$file_includes{$file} if exists $file_includes{$file};
311 # Prevent potential infinite recursion (if two files include each other).
312 return () if exists $file_contents{$file};
313
314 unshift @file_order, $file;
315
316 my $fh = new Automake::XFile $file;
317 my $contents = '';
318 my @inc_files = ();
319 while ($_ = $fh->getline)
320 {
321 # Ignore `##' lines.
322 next if /^##/;
323
324 $contents .= $_;
325
326 while (/$ac_defun_rx/go)
327 {
328 if (! defined $1)
329 {
330 print STDERR "$file:$.: warning: underquoted definition of $2\n";
331 print STDERR " run info '(automake)Extending aclocal'\n"
332 . " or see http://sources.redhat.com/automake/"
333 . "automake.html#Extending%20aclocal\n"
334 unless $underquoted_manual_once;
335 $underquoted_manual_once = 1;
336 }
337 my $macro = $1 || $2;
338 if (! defined $map{$macro})
339 {
340 print STDERR "aclocal: found macro $macro in $file: $.\n"
341 if $verbose;
342 $map{$macro} = $file;
343 }
344 else
345 {
346 # Note: we used to give an error here if we saw a
347 # duplicated macro. However, this turns out to be
348 # extremely unpopular. It causes actual problems which
349 # are hard to work around, especially when you must
350 # mix-and-match tool versions.
351 print STDERR "aclocal: ignoring macro $macro in $file: $.\n"
352 if $verbose;
353 }
354 }
355
356 while (/$m4_include_rx/go)
357 {
358 my $ifile = $1 || $2;
359 # m4_include is relative to the directory of the file which
360 # perform the include, but we want paths relative to the
361 # directory where aclocal is run. Do not use
362 # File::Spec->rel2abs, because we want to store relative
363 # paths (they might be used later of aclocal outputs an
364 # m4_include for this file, or if the user itself includes
365 # this file).
366 $ifile = "$base/$ifile"
367 unless $base eq '.' || File::Spec->file_name_is_absolute ($ifile);
368 push (@inc_files, $ifile);
369 }
370 }
371 $file_contents{$file} = $contents;
372
373 # For some reason I don't understand, it does not work
374 # to do `map { scan_file ($_) } @inc_files' below.
375 # With Perl 5.8.2 it undefines @inc_files.
376 my @copy = @inc_files;
377 my @all_inc_files = (@inc_files, map { scan_file ($_) } @copy);
378 $file_includes{$file} = \@all_inc_files;
379 return @all_inc_files;
380}
381
382# strip_redundant_includes (%FILES)
383# ---------------------------------
384# Each key in %FILES is a file that must be present in the output.
385# However some of these files might already include other files in %FILES,
386# so there is no point in including them another time.
387# This removes items of %FILES which are already included by another file.
388sub strip_redundant_includes (%)
389{
390 my %files = @_;
391 # Files at the end of @file_order should override those at the beginning,
392 # so it is important to preserve these trailing files. We can remove
393 # a file A if it is going to be output before a file B that includes
394 # file A, not the converse.
395 foreach my $file (reverse @file_order)
396 {
397 next unless exists $files{$file};
398 foreach my $ifile (@{$file_includes{$file}})
399 {
400 next unless exists $files{$ifile};
401 delete $files{$ifile};
402 print STDERR "$ifile is already included by $file\n"
403 if $verbose;
404 }
405 }
406 return %files;
407}
408
409sub trace_used_macros ()
410{
411 my %files = map { $map{$_} => 1 } keys %macro_seen;
412 $files{'acinclude.m4'} = 1 if -f 'acinclude.m4';
413 %files = strip_redundant_includes %files;
414 # configure.ac is implicitly included.
415 delete $files{$configure_ac};
416
417 my $traces = ($ENV{AUTOM4TE} || 'autom4te');
418 $traces .= " --language Autoconf-without-aclocal-m4 ";
419 # All candidate files.
420 $traces .= join (' ', grep { exists $files{$_} } @file_order) . " ";
421 # All candidate macros.
422 $traces .= join (' ', map { "--trace='$_:\$n'" } (keys %macro_seen));
423
424 print STDERR "aclocal: running $traces $configure_ac\n" if $verbose;
425
426 my $tracefh = new Automake::XFile ("$traces $configure_ac |");
427
428 my %traced = ();
429
430 while ($_ = $tracefh->getline)
431 {
432 chomp;
433 $traced{$_} = 1 if $macro_seen{$_};
434 }
435
436 $tracefh->close;
437
438 return %traced;
439}
440
441sub scan_configure ()
442{
443 # Make sure we include acinclude.m4 if it exists.
444 if (-f 'acinclude.m4')
445 {
446 add_file ('acinclude.m4');
447 }
448 scan_configure_dep ($configure_ac);
449}
450
451################################################################
452
453# Write output.
454sub write_aclocal ($@)
455{
456 my ($output_file, @macros) = @_;
457 my $output = '';
458
459 my %files = map { $map{$_} => 1 } @macros;
460 $files{'acinclude.m4'} = 1 if -f 'acinclude.m4';
461 %files = strip_redundant_includes %files;
462 delete $files{$configure_ac};
463
464 for $file (grep { exists $files{$_} } @file_order)
465 {
466 # Check the time stamp of this file, and all files it includes.
467 for my $ifile ($file, @{$file_includes{$file}})
468 {
469 my $mtime = mtime $ifile;
470 $greatest_mtime = $mtime if $greatest_mtime < $mtime;
471 }
472
473 # If the file to add looks like outside the project, copy it
474 # to the output. The regex catches filenames starting with
475 # things like `/', `\', or `c:\'.
476 if ($file =~ m,^(?:\w:)?[\\/],)
477 {
478 $output .= $file_contents{$file} . "\n";
479 }
480 else
481 {
482 # Otherwise, simply include the file.
483 $output .= "m4_include([$file])\n";
484 }
485 }
486
487 # Nothing to output?!
488 # FIXME: Shouldn't we diagnose this?
489 return if ! length ($output);
490
491 # We used to print `# $output_file generated automatically etc.' But
492 # this creates spurious differences when using autoreconf. Autoreconf
493 # creates aclocal.m4t and then rename it to aclocal.m4, but the
494 # rebuild rules generated by Automake create aclocal.m4 directly --
495 # this would gives two ways to get the same file, with a different
496 # name in the header.
497 $output = "# generated automatically by aclocal $VERSION -*- Autoconf -*-
498
499# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
500# Free Software Foundation, Inc.
501# This file is free software; the Free Software Foundation
502# gives unlimited permission to copy and/or distribute it,
503# with or without modifications, as long as this notice is preserved.
504
505# This program is distributed in the hope that it will be useful,
506# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
507# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
508# PARTICULAR PURPOSE.
509
510$output";
511
512 # We try not to update $output_file unless necessary, because
513 # doing so invalidate Autom4te's cache and therefore slows down
514 # tools called after aclocal.
515 #
516 # We need to overwrite $output_file in the following situations.
517 # * The --force option is in use.
518 # * One of the dependencies is younger.
519 # (Not updating $output_file in this situation would cause
520 # make to call aclocal in loop.)
521 # * The contents of the current file are different from what
522 # we have computed.
523 if (!$force_output
524 && $greatest_mtime < mtime ($output_file)
525 && $output eq contents ($output_file))
526 {
527 print STDERR "aclocal: $output_file unchanged\n" if $verbose;
528 return;
529 }
530
531 print STDERR "aclocal: writing $output_file\n" if $verbose;
532
533 my $out = new Automake::XFile "> $output_file";
534 print $out $output;
535 return;
536}
537
538################################################################
539
540# Print usage and exit.
541sub usage ($)
542{
543 local ($status) = @_;
544
545 print "Usage: aclocal [OPTIONS] ...\n\n";
546 print "\
547Generate `aclocal.m4' by scanning `configure.ac' or `configure.in'
548
549 --acdir=DIR directory holding config files
550 --help print this help, then exit
551 -I DIR add directory to search list for .m4 files
552 --force always update output file
553 --output=FILE put output in FILE (default aclocal.m4)
554 --print-ac-dir print name of directory holding m4 files
555 --verbose don't be silent
556 --version print version number, then exit
557
558Report bugs to <bug-automake\@gnu.org>.\n";
559
560 exit $status;
561}
562
563# Parse command line.
564sub parse_arguments (@)
565{
566 local (@arglist) = @_;
567 local (@dirlist);
568 local ($print_and_exit) = 0;
569
570 while (@arglist)
571 {
572 if ($arglist[0] =~ /^--acdir=(.+)$/)
573 {
574 $acdir = $1;
575 }
576 elsif ($arglist[0] =~/^--output=(.+)$/)
577 {
578 $output_file = $1;
579 }
580 elsif ($arglist[0] eq '-I')
581 {
582 shift (@arglist);
583 push (@dirlist, $arglist[0]);
584 }
585 elsif ($arglist[0] eq '--print-ac-dir')
586 {
587 $print_and_exit = 1;
588 }
589 elsif ($arglist[0] eq '--force')
590 {
591 $force_output = 1;
592 }
593 elsif ($arglist[0] eq '--verbose')
594 {
595 ++$verbose;
596 }
597 elsif ($arglist[0] eq '--version')
598 {
599 print "aclocal (GNU $PACKAGE) $VERSION\n";
600 print "Written by Tom Tromey <tromey\@redhat.com>\n\n";
601 print "Copyright (C) 2004 Free Software Foundation, Inc.\n";
602 print "This is free software; see the source for copying conditions. There is NO\n";
603 print "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n";
604 exit 0;
605 }
606 elsif ($arglist[0] eq '--help')
607 {
608 &usage (0);
609 }
610 else
611 {
612 print STDERR "aclocal: unrecognized option -- `$arglist[0]'\nTry `aclocal --help' for more information.\n";
613 exit 1;
614 }
615
616 shift (@arglist);
617 }
618
619 if ($print_and_exit)
620 {
621 print $acdir, "\n";
622 exit 0;
623 }
624
625 $default_dirlist="$acdir/dirlist"
626 if $acdir ne $default_acdir;
627
628 # Search the versioned directory near the end, and then the
629 # unversioned directory last. Only do this if the user didn't
630 # override acdir.
631 push (@dirlist, "$acdir-$APIVERSION")
632 if $acdir eq $default_acdir;
633
634 # By default $(datadir)/aclocal doesn't exist. We don't want to
635 # get an error in the case where we are searching the default
636 # directory and it hasn't been created.
637 push (@dirlist, $acdir)
638 unless $acdir eq $default_acdir && ! -d $acdir;
639
640 # Finally, adds any directory listed in the `dirlist' file.
641 if (open (DEFAULT_DIRLIST, $default_dirlist))
642 {
643 while (<DEFAULT_DIRLIST>)
644 {
645 # Ignore '#' lines.
646 next if /^#/;
647 # strip off newlines and end-of-line comments
648 s/\s*\#.*$//;
649 chomp ($contents=$_);
650 if (-d $contents )
651 {
652 push (@dirlist, $contents);
653 }
654 }
655 close (DEFAULT_DIRLIST);
656 }
657
658 return @dirlist;
659}
660
661################################################################
662
663local (@dirlist) = parse_arguments (@ARGV);
664$configure_ac = require_configure_ac;
665scan_m4_files (@dirlist);
666scan_configure;
667if (! $exit_code)
668 {
669 my %macro_traced = trace_used_macros;
670 write_aclocal ($output_file, keys %macro_traced);
671 }
672check_acinclude;
673
674exit $exit_code;
675
676### Setup "GNU" style for perl-mode and cperl-mode.
677## Local Variables:
678## perl-indent-level: 2
679## perl-continued-statement-offset: 2
680## perl-continued-brace-offset: 0
681## perl-brace-offset: 0
682## perl-brace-imaginary-offset: 0
683## perl-label-offset: -2
684## cperl-indent-level: 2
685## cperl-brace-offset: 0
686## cperl-continued-brace-offset: 0
687## cperl-label-offset: -2
688## cperl-extra-newline-before-brace: t
689## cperl-merge-trailing-else: nil
690## cperl-continued-statement-offset: 2
691## End:
Note: See TracBrowser for help on using the repository browser.