source: trunk/essentials/sys-apps/findutils/Makefile.in@ 3204

Last change on this file since 3204 was 3170, checked in by bird, 18 years ago

findutils 4.3.2

File size: 27.3 KB
Line 
1# Makefile.in generated by automake 1.9.6 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005 Free Software Foundation, Inc.
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16srcdir = @srcdir@
17top_srcdir = @top_srcdir@
18VPATH = @srcdir@
19pkgdatadir = $(datadir)/@PACKAGE@
20pkglibdir = $(libdir)/@PACKAGE@
21pkgincludedir = $(includedir)/@PACKAGE@
22top_builddir = .
23am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
24INSTALL = @INSTALL@
25install_sh_DATA = $(install_sh) -c -m 644
26install_sh_PROGRAM = $(install_sh) -c
27install_sh_SCRIPT = $(install_sh) -c
28INSTALL_HEADER = $(INSTALL_DATA)
29transform = $(program_transform_name)
30NORMAL_INSTALL = :
31PRE_INSTALL = :
32POST_INSTALL = :
33NORMAL_UNINSTALL = :
34PRE_UNINSTALL = :
35POST_UNINSTALL = :
36build_triplet = @build@
37host_triplet = @host@
38DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
39 $(srcdir)/Makefile.in $(srcdir)/config.h.in \
40 $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \
41 INSTALL NEWS README-alpha THANKS TODO config.guess \
42 config.rpath config.sub depcomp install-sh missing \
43 mkinstalldirs
44subdir = .
45ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
46am__aclocal_m4_deps = $(top_srcdir)/m4/findlib.m4 \
47 $(top_srcdir)/m4/mkinstalldirs.m4 $(top_srcdir)/m4/nullsort.m4 \
48 $(top_srcdir)/m4/withfts.m4 \
49 $(top_srcdir)/gnulib/m4/absolute-header.m4 \
50 $(top_srcdir)/gnulib/m4/alloca.m4 \
51 $(top_srcdir)/gnulib/m4/argmatch.m4 \
52 $(top_srcdir)/gnulib/m4/canonicalize.m4 \
53 $(top_srcdir)/gnulib/m4/chdir-long.m4 \
54 $(top_srcdir)/gnulib/m4/chown.m4 \
55 $(top_srcdir)/gnulib/m4/close-stream.m4 \
56 $(top_srcdir)/gnulib/m4/closeout.m4 \
57 $(top_srcdir)/gnulib/m4/codeset.m4 \
58 $(top_srcdir)/gnulib/m4/cycle-check.m4 \
59 $(top_srcdir)/gnulib/m4/d-ino.m4 \
60 $(top_srcdir)/gnulib/m4/d-type.m4 \
61 $(top_srcdir)/gnulib/m4/dirfd.m4 \
62 $(top_srcdir)/gnulib/m4/dirname.m4 \
63 $(top_srcdir)/gnulib/m4/dos.m4 \
64 $(top_srcdir)/gnulib/m4/double-slash-root.m4 \
65 $(top_srcdir)/gnulib/m4/error.m4 \
66 $(top_srcdir)/gnulib/m4/exitfail.m4 \
67 $(top_srcdir)/gnulib/m4/extensions.m4 \
68 $(top_srcdir)/gnulib/m4/fcntl-safer.m4 \
69 $(top_srcdir)/gnulib/m4/fcntl_h.m4 \
70 $(top_srcdir)/gnulib/m4/fileblocks.m4 \
71 $(top_srcdir)/gnulib/m4/filemode.m4 \
72 $(top_srcdir)/gnulib/m4/filenamecat.m4 \
73 $(top_srcdir)/gnulib/m4/flexmember.m4 \
74 $(top_srcdir)/gnulib/m4/fnmatch.m4 \
75 $(top_srcdir)/gnulib/m4/fpending.m4 \
76 $(top_srcdir)/gnulib/m4/fstypename.m4 \
77 $(top_srcdir)/gnulib/m4/fts.m4 \
78 $(top_srcdir)/gnulib/m4/getcwd-abort-bug.m4 \
79 $(top_srcdir)/gnulib/m4/getcwd-path-max.m4 \
80 $(top_srcdir)/gnulib/m4/getcwd.m4 \
81 $(top_srcdir)/gnulib/m4/getdelim.m4 \
82 $(top_srcdir)/gnulib/m4/getline.m4 \
83 $(top_srcdir)/gnulib/m4/getopt.m4 \
84 $(top_srcdir)/gnulib/m4/gettext.m4 \
85 $(top_srcdir)/gnulib/m4/gnulib-comp.m4 \
86 $(top_srcdir)/gnulib/m4/hash.m4 \
87 $(top_srcdir)/gnulib/m4/human.m4 \
88 $(top_srcdir)/gnulib/m4/i-ring.m4 \
89 $(top_srcdir)/gnulib/m4/iconv.m4 \
90 $(top_srcdir)/gnulib/m4/idcache.m4 \
91 $(top_srcdir)/gnulib/m4/inline.m4 \
92 $(top_srcdir)/gnulib/m4/inttypes-pri.m4 \
93 $(top_srcdir)/gnulib/m4/inttypes.m4 \
94 $(top_srcdir)/gnulib/m4/lchown.m4 \
95 $(top_srcdir)/gnulib/m4/lib-ld.m4 \
96 $(top_srcdir)/gnulib/m4/lib-link.m4 \
97 $(top_srcdir)/gnulib/m4/lib-prefix.m4 \
98 $(top_srcdir)/gnulib/m4/lock.m4 \
99 $(top_srcdir)/gnulib/m4/longlong.m4 \
100 $(top_srcdir)/gnulib/m4/ls-mntd-fs.m4 \
101 $(top_srcdir)/gnulib/m4/lstat.m4 \
102 $(top_srcdir)/gnulib/m4/mbchar.m4 \
103 $(top_srcdir)/gnulib/m4/mbiter.m4 \
104 $(top_srcdir)/gnulib/m4/mbrtowc.m4 \
105 $(top_srcdir)/gnulib/m4/mbstate_t.m4 \
106 $(top_srcdir)/gnulib/m4/memchr.m4 \
107 $(top_srcdir)/gnulib/m4/memcmp.m4 \
108 $(top_srcdir)/gnulib/m4/mempcpy.m4 \
109 $(top_srcdir)/gnulib/m4/memrchr.m4 \
110 $(top_srcdir)/gnulib/m4/memset.m4 \
111 $(top_srcdir)/gnulib/m4/mktime.m4 \
112 $(top_srcdir)/gnulib/m4/modechange.m4 \
113 $(top_srcdir)/gnulib/m4/mountlist.m4 \
114 $(top_srcdir)/gnulib/m4/nls.m4 \
115 $(top_srcdir)/gnulib/m4/onceonly_2_57.m4 \
116 $(top_srcdir)/gnulib/m4/openat.m4 \
117 $(top_srcdir)/gnulib/m4/pathmax.m4 \
118 $(top_srcdir)/gnulib/m4/po.m4 \
119 $(top_srcdir)/gnulib/m4/progtest.m4 \
120 $(top_srcdir)/gnulib/m4/quote.m4 \
121 $(top_srcdir)/gnulib/m4/quotearg.m4 \
122 $(top_srcdir)/gnulib/m4/readlink.m4 \
123 $(top_srcdir)/gnulib/m4/regex.m4 \
124 $(top_srcdir)/gnulib/m4/rpmatch.m4 \
125 $(top_srcdir)/gnulib/m4/save-cwd.m4 \
126 $(top_srcdir)/gnulib/m4/savedir.m4 \
127 $(top_srcdir)/gnulib/m4/ssize_t.m4 \
128 $(top_srcdir)/gnulib/m4/st_dm_mode.m4 \
129 $(top_srcdir)/gnulib/m4/stdbool.m4 \
130 $(top_srcdir)/gnulib/m4/stdint.m4 \
131 $(top_srcdir)/gnulib/m4/stdio-safer.m4 \
132 $(top_srcdir)/gnulib/m4/stpcpy.m4 \
133 $(top_srcdir)/gnulib/m4/strcase.m4 \
134 $(top_srcdir)/gnulib/m4/strdup.m4 \
135 $(top_srcdir)/gnulib/m4/strftime.m4 \
136 $(top_srcdir)/gnulib/m4/strndup.m4 \
137 $(top_srcdir)/gnulib/m4/strnlen.m4 \
138 $(top_srcdir)/gnulib/m4/strstr.m4 \
139 $(top_srcdir)/gnulib/m4/strtoimax.m4 \
140 $(top_srcdir)/gnulib/m4/strtol.m4 \
141 $(top_srcdir)/gnulib/m4/strtoll.m4 \
142 $(top_srcdir)/gnulib/m4/strtoul.m4 \
143 $(top_srcdir)/gnulib/m4/strtoull.m4 \
144 $(top_srcdir)/gnulib/m4/strtoumax.m4 \
145 $(top_srcdir)/gnulib/m4/sys_stat_h.m4 \
146 $(top_srcdir)/gnulib/m4/time_r.m4 \
147 $(top_srcdir)/gnulib/m4/tm_gmtoff.m4 \
148 $(top_srcdir)/gnulib/m4/ulonglong.m4 \
149 $(top_srcdir)/gnulib/m4/unistd-safer.m4 \
150 $(top_srcdir)/gnulib/m4/unistd_h.m4 \
151 $(top_srcdir)/gnulib/m4/wchar_t.m4 \
152 $(top_srcdir)/gnulib/m4/wcwidth.m4 \
153 $(top_srcdir)/gnulib/m4/wint_t.m4 \
154 $(top_srcdir)/gnulib/m4/xalloc.m4 \
155 $(top_srcdir)/gnulib/m4/xgetcwd.m4 \
156 $(top_srcdir)/gnulib/m4/xreadlink.m4 \
157 $(top_srcdir)/gnulib/m4/xstrndup.m4 \
158 $(top_srcdir)/gnulib/m4/xstrtod.m4 \
159 $(top_srcdir)/gnulib/m4/xstrtol.m4 \
160 $(top_srcdir)/gnulib/m4/yesno.m4 $(top_srcdir)/configure.in
161am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
162 $(ACLOCAL_M4)
163am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
164 configure.lineno configure.status.lineno
165mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
166CONFIG_HEADER = config.h
167CONFIG_CLEAN_FILES =
168SOURCES =
169DIST_SOURCES =
170RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
171 html-recursive info-recursive install-data-recursive \
172 install-exec-recursive install-info-recursive \
173 install-recursive installcheck-recursive installdirs-recursive \
174 pdf-recursive ps-recursive uninstall-info-recursive \
175 uninstall-recursive
176ETAGS = etags
177CTAGS = ctags
178DIST_SUBDIRS = $(SUBDIRS)
179DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
180distdir = $(PACKAGE)-$(VERSION)
181top_distdir = $(distdir)
182am__remove_distdir = \
183 { test ! -d $(distdir) \
184 || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
185 && rm -fr $(distdir); }; }
186DIST_ARCHIVES = $(distdir).tar.gz
187GZIP_ENV = --best
188distuninstallcheck_listfiles = find . -type f -print
189distcleancheck_listfiles = find . -type f -print
190ABSOLUTE_FCNTL_H = @ABSOLUTE_FCNTL_H@
191ABSOLUTE_INTTYPES_H = @ABSOLUTE_INTTYPES_H@
192ABSOLUTE_STDINT_H = @ABSOLUTE_STDINT_H@
193ABSOLUTE_SYS_STAT_H = @ABSOLUTE_SYS_STAT_H@
194ACLOCAL = @ACLOCAL@
195ALLOCA = @ALLOCA@
196ALLOCA_H = @ALLOCA_H@
197AMDEP_FALSE = @AMDEP_FALSE@
198AMDEP_TRUE = @AMDEP_TRUE@
199AMTAR = @AMTAR@
200AUTOCONF = @AUTOCONF@
201AUTOHEADER = @AUTOHEADER@
202AUTOMAKE = @AUTOMAKE@
203AWK = @AWK@
204BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
205BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
206BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
207BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
208BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
209CC = @CC@
210CCDEPMODE = @CCDEPMODE@
211CFLAGS = @CFLAGS@
212CPP = @CPP@
213CPPFLAGS = @CPPFLAGS@
214CROSS_COMPILING_FALSE = @CROSS_COMPILING_FALSE@
215CROSS_COMPILING_TRUE = @CROSS_COMPILING_TRUE@
216CYGPATH_W = @CYGPATH_W@
217DEFS = @DEFS@
218DEPDIR = @DEPDIR@
219ECHO_C = @ECHO_C@
220ECHO_N = @ECHO_N@
221ECHO_T = @ECHO_T@
222EGREP = @EGREP@
223EXEEXT = @EXEEXT@
224FCNTL_H = @FCNTL_H@
225FINDLIBOBJS = @FINDLIBOBJS@
226FNMATCH_H = @FNMATCH_H@
227GETOPT_H = @GETOPT_H@
228GL_COND_LIBTOOL_FALSE = @GL_COND_LIBTOOL_FALSE@
229GL_COND_LIBTOOL_TRUE = @GL_COND_LIBTOOL_TRUE@
230GMSGFMT = @GMSGFMT@
231GMSGFMT_015 = @GMSGFMT_015@
232GREP = @GREP@
233HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@
234HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@
235HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@
236HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@
237HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
238HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
239HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
240HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
241HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
242HAVE_STDINT_H = @HAVE_STDINT_H@
243HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
244HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
245HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
246HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
247HAVE_WCHAR_H = @HAVE_WCHAR_H@
248HAVE__BOOL = @HAVE__BOOL@
249INCLUDES = @INCLUDES@
250INSTALL_DATA = @INSTALL_DATA@
251INSTALL_PROGRAM = @INSTALL_PROGRAM@
252INSTALL_SCRIPT = @INSTALL_SCRIPT@
253INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
254INTLLIBS = @INTLLIBS@
255INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
256INTTYPES_H = @INTTYPES_H@
257LDFLAGS = @LDFLAGS@
258LIBGNULIB_LIBDEPS = @LIBGNULIB_LIBDEPS@
259LIBGNULIB_LTLIBDEPS = @LIBGNULIB_LTLIBDEPS@
260LIBICONV = @LIBICONV@
261LIBINTL = @LIBINTL@
262LIBOBJS = @LIBOBJS@
263LIBS = @LIBS@
264LTLIBICONV = @LTLIBICONV@
265LTLIBINTL = @LTLIBINTL@
266LTLIBOBJS = @LTLIBOBJS@
267MAKEINFO = @MAKEINFO@
268MKINSTALLDIRS = @MKINSTALLDIRS@
269MSGFMT = @MSGFMT@
270MSGFMT_015 = @MSGFMT_015@
271MSGMERGE = @MSGMERGE@
272OBJEXT = @OBJEXT@
273PACKAGE = @PACKAGE@
274PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
275PACKAGE_NAME = @PACKAGE_NAME@
276PACKAGE_STRING = @PACKAGE_STRING@
277PACKAGE_TARNAME = @PACKAGE_TARNAME@
278PACKAGE_VERSION = @PACKAGE_VERSION@
279PATH_SEPARATOR = @PATH_SEPARATOR@
280POSUB = @POSUB@
281PRIPTR_PREFIX = @PRIPTR_PREFIX@
282PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@
283PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
284RANLIB = @RANLIB@
285SET_MAKE = @SET_MAKE@
286SHELL = @SHELL@
287SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
288SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
289SORT = @SORT@
290SORT_SUPPORTS_Z = @SORT_SUPPORTS_Z@
291STDBOOL_H = @STDBOOL_H@
292STDINT_H = @STDINT_H@
293STRIP = @STRIP@
294SYS_STAT_H = @SYS_STAT_H@
295U = @U@
296UNISTD_H = @UNISTD_H@
297USE_NLS = @USE_NLS@
298VERSION = @VERSION@
299WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
300WINT_T_SUFFIX = @WINT_T_SUFFIX@
301WITH_FTS_FALSE = @WITH_FTS_FALSE@
302WITH_FTS_TRUE = @WITH_FTS_TRUE@
303XGETTEXT = @XGETTEXT@
304XGETTEXT_015 = @XGETTEXT_015@
305ac_ct_CC = @ac_ct_CC@
306am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
307am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
308am__include = @am__include@
309am__leading_dot = @am__leading_dot@
310am__quote = @am__quote@
311am__tar = @am__tar@
312am__untar = @am__untar@
313bindir = @bindir@
314build = @build@
315build_alias = @build_alias@
316build_cpu = @build_cpu@
317build_os = @build_os@
318build_vendor = @build_vendor@
319datadir = @datadir@
320datarootdir = @datarootdir@
321docdir = @docdir@
322dvidir = @dvidir@
323exec_prefix = @exec_prefix@
324gl_LIBOBJS = @gl_LIBOBJS@
325gl_LTLIBOBJS = @gl_LTLIBOBJS@
326host = @host@
327host_alias = @host_alias@
328host_cpu = @host_cpu@
329host_os = @host_os@
330host_vendor = @host_vendor@
331htmldir = @htmldir@
332includedir = @includedir@
333infodir = @infodir@
334install_sh = @install_sh@
335libdir = @libdir@
336libexecdir = @libexecdir@
337localedir = @localedir@
338localstatedir = @localstatedir@
339mandir = @mandir@
340mkdir_p = @mkdir_p@
341oldincludedir = @oldincludedir@
342pdfdir = @pdfdir@
343prefix = @prefix@
344program_transform_name = @program_transform_name@
345psdir = @psdir@
346sbindir = @sbindir@
347sharedstatedir = @sharedstatedir@
348sysconfdir = @sysconfdir@
349target_alias = @target_alias@
350AUTOMAKE_OPTIONS = gnits
351# readme-alpha
352EXTRA_DIST = COPYING ChangeLog TODO install-sh config.h.in stamp-h.in \
353 THANKS config.rpath
354
355SUBDIRS = gnulib lib find xargs locate doc po m4
356ACLOCAL_AMFLAGS = -I gnulib/m4 -I m4
357all: config.h
358 $(MAKE) $(AM_MAKEFLAGS) all-recursive
359
360.SUFFIXES:
361am--refresh:
362 @:
363$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
364 @for dep in $?; do \
365 case '$(am__configure_deps)' in \
366 *$$dep*) \
367 echo ' cd $(srcdir) && $(AUTOMAKE) --gnits '; \
368 cd $(srcdir) && $(AUTOMAKE) --gnits \
369 && exit 0; \
370 exit 1;; \
371 esac; \
372 done; \
373 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits Makefile'; \
374 cd $(top_srcdir) && \
375 $(AUTOMAKE) --gnits Makefile
376.PRECIOUS: Makefile
377Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
378 @case '$?' in \
379 *config.status*) \
380 echo ' $(SHELL) ./config.status'; \
381 $(SHELL) ./config.status;; \
382 *) \
383 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
384 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
385 esac;
386
387$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
388 $(SHELL) ./config.status --recheck
389
390$(top_srcdir)/configure: $(am__configure_deps)
391 cd $(srcdir) && $(AUTOCONF)
392$(ACLOCAL_M4): $(am__aclocal_m4_deps)
393 cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
394
395config.h: stamp-h1
396 @if test ! -f $@; then \
397 rm -f stamp-h1; \
398 $(MAKE) stamp-h1; \
399 else :; fi
400
401stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
402 @rm -f stamp-h1
403 cd $(top_builddir) && $(SHELL) ./config.status config.h
404$(srcdir)/config.h.in: $(am__configure_deps)
405 cd $(top_srcdir) && $(AUTOHEADER)
406 rm -f stamp-h1
407 touch $@
408
409distclean-hdr:
410 -rm -f config.h stamp-h1
411uninstall-info-am:
412
413# This directory's subdirectories are mostly independent; you can cd
414# into them and run `make' without going through this Makefile.
415# To change the values of `make' variables: instead of editing Makefiles,
416# (1) if the variable is set in `config.status', edit `config.status'
417# (which will cause the Makefiles to be regenerated when you run `make');
418# (2) otherwise, pass the desired values on the `make' command line.
419$(RECURSIVE_TARGETS):
420 @failcom='exit 1'; \
421 for f in x $$MAKEFLAGS; do \
422 case $$f in \
423 *=* | --[!k]*);; \
424 *k*) failcom='fail=yes';; \
425 esac; \
426 done; \
427 dot_seen=no; \
428 target=`echo $@ | sed s/-recursive//`; \
429 list='$(SUBDIRS)'; for subdir in $$list; do \
430 echo "Making $$target in $$subdir"; \
431 if test "$$subdir" = "."; then \
432 dot_seen=yes; \
433 local_target="$$target-am"; \
434 else \
435 local_target="$$target"; \
436 fi; \
437 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
438 || eval $$failcom; \
439 done; \
440 if test "$$dot_seen" = "no"; then \
441 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
442 fi; test -z "$$fail"
443
444mostlyclean-recursive clean-recursive distclean-recursive \
445maintainer-clean-recursive:
446 @failcom='exit 1'; \
447 for f in x $$MAKEFLAGS; do \
448 case $$f in \
449 *=* | --[!k]*);; \
450 *k*) failcom='fail=yes';; \
451 esac; \
452 done; \
453 dot_seen=no; \
454 case "$@" in \
455 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
456 *) list='$(SUBDIRS)' ;; \
457 esac; \
458 rev=''; for subdir in $$list; do \
459 if test "$$subdir" = "."; then :; else \
460 rev="$$subdir $$rev"; \
461 fi; \
462 done; \
463 rev="$$rev ."; \
464 target=`echo $@ | sed s/-recursive//`; \
465 for subdir in $$rev; do \
466 echo "Making $$target in $$subdir"; \
467 if test "$$subdir" = "."; then \
468 local_target="$$target-am"; \
469 else \
470 local_target="$$target"; \
471 fi; \
472 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
473 || eval $$failcom; \
474 done && test -z "$$fail"
475tags-recursive:
476 list='$(SUBDIRS)'; for subdir in $$list; do \
477 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
478 done
479ctags-recursive:
480 list='$(SUBDIRS)'; for subdir in $$list; do \
481 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
482 done
483
484ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
485 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
486 unique=`for i in $$list; do \
487 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
488 done | \
489 $(AWK) ' { files[$$0] = 1; } \
490 END { for (i in files) print i; }'`; \
491 mkid -fID $$unique
492tags: TAGS
493
494TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
495 $(TAGS_FILES) $(LISP)
496 tags=; \
497 here=`pwd`; \
498 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
499 include_option=--etags-include; \
500 empty_fix=.; \
501 else \
502 include_option=--include; \
503 empty_fix=; \
504 fi; \
505 list='$(SUBDIRS)'; for subdir in $$list; do \
506 if test "$$subdir" = .; then :; else \
507 test ! -f $$subdir/TAGS || \
508 tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
509 fi; \
510 done; \
511 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
512 unique=`for i in $$list; do \
513 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
514 done | \
515 $(AWK) ' { files[$$0] = 1; } \
516 END { for (i in files) print i; }'`; \
517 if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
518 test -n "$$unique" || unique=$$empty_fix; \
519 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
520 $$tags $$unique; \
521 fi
522ctags: CTAGS
523CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
524 $(TAGS_FILES) $(LISP)
525 tags=; \
526 here=`pwd`; \
527 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
528 unique=`for i in $$list; do \
529 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
530 done | \
531 $(AWK) ' { files[$$0] = 1; } \
532 END { for (i in files) print i; }'`; \
533 test -z "$(CTAGS_ARGS)$$tags$$unique" \
534 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
535 $$tags $$unique
536
537GTAGS:
538 here=`$(am__cd) $(top_builddir) && pwd` \
539 && cd $(top_srcdir) \
540 && gtags -i $(GTAGS_ARGS) $$here
541
542distclean-tags:
543 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
544
545distdir: $(DISTFILES)
546 @case `sed 15q $(srcdir)/NEWS` in \
547 *"$(VERSION)"*) : ;; \
548 *) \
549 echo "NEWS not updated; not releasing" 1>&2; \
550 exit 1;; \
551 esac
552 $(am__remove_distdir)
553 mkdir $(distdir)
554 $(mkdir_p) $(distdir)/gnulib/m4 $(distdir)/m4 $(distdir)/po
555 @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
556 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
557 list='$(DISTFILES)'; for file in $$list; do \
558 case $$file in \
559 $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
560 $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
561 esac; \
562 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
563 dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
564 if test "$$dir" != "$$file" && test "$$dir" != "."; then \
565 dir="/$$dir"; \
566 $(mkdir_p) "$(distdir)$$dir"; \
567 else \
568 dir=''; \
569 fi; \
570 if test -d $$d/$$file; then \
571 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
572 cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
573 fi; \
574 cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
575 else \
576 test -f $(distdir)/$$file \
577 || cp -p $$d/$$file $(distdir)/$$file \
578 || exit 1; \
579 fi; \
580 done
581 list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
582 if test "$$subdir" = .; then :; else \
583 test -d "$(distdir)/$$subdir" \
584 || $(mkdir_p) "$(distdir)/$$subdir" \
585 || exit 1; \
586 distdir=`$(am__cd) $(distdir) && pwd`; \
587 top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
588 (cd $$subdir && \
589 $(MAKE) $(AM_MAKEFLAGS) \
590 top_distdir="$$top_distdir" \
591 distdir="$$distdir/$$subdir" \
592 distdir) \
593 || exit 1; \
594 fi; \
595 done
596 $(MAKE) $(AM_MAKEFLAGS) \
597 top_distdir="$(top_distdir)" distdir="$(distdir)" \
598 dist-hook
599 -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
600 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
601 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
602 ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
603 || chmod -R a+r $(distdir)
604dist-gzip: distdir
605 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
606 $(am__remove_distdir)
607
608dist-bzip2: distdir
609 tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
610 $(am__remove_distdir)
611
612dist-tarZ: distdir
613 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
614 $(am__remove_distdir)
615
616dist-shar: distdir
617 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
618 $(am__remove_distdir)
619
620dist-zip: distdir
621 -rm -f $(distdir).zip
622 zip -rq $(distdir).zip $(distdir)
623 $(am__remove_distdir)
624
625dist dist-all: distdir
626 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
627 $(am__remove_distdir)
628
629# This target untars the dist file and tries a VPATH configuration. Then
630# it guarantees that the distribution is self-contained by making another
631# tarfile.
632distcheck: dist
633 case '$(DIST_ARCHIVES)' in \
634 *.tar.gz*) \
635 GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
636 *.tar.bz2*) \
637 bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
638 *.tar.Z*) \
639 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
640 *.shar.gz*) \
641 GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
642 *.zip*) \
643 unzip $(distdir).zip ;;\
644 esac
645 chmod -R a-w $(distdir); chmod a+w $(distdir)
646 mkdir $(distdir)/_build
647 mkdir $(distdir)/_inst
648 chmod a-w $(distdir)
649 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
650 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
651 && cd $(distdir)/_build \
652 && ../configure --srcdir=.. --prefix="$$dc_install_base" \
653 $(DISTCHECK_CONFIGURE_FLAGS) \
654 && $(MAKE) $(AM_MAKEFLAGS) \
655 && $(MAKE) $(AM_MAKEFLAGS) dvi \
656 && $(MAKE) $(AM_MAKEFLAGS) check \
657 && $(MAKE) $(AM_MAKEFLAGS) install \
658 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
659 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
660 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
661 distuninstallcheck \
662 && chmod -R a-w "$$dc_install_base" \
663 && ({ \
664 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
665 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
666 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
667 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
668 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
669 } || { rm -rf "$$dc_destdir"; exit 1; }) \
670 && rm -rf "$$dc_destdir" \
671 && $(MAKE) $(AM_MAKEFLAGS) dist \
672 && rm -rf $(DIST_ARCHIVES) \
673 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
674 $(am__remove_distdir)
675 @(echo "$(distdir) archives ready for distribution: "; \
676 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
677 sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
678distuninstallcheck:
679 @cd $(distuninstallcheck_dir) \
680 && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
681 || { echo "ERROR: files left after uninstall:" ; \
682 if test -n "$(DESTDIR)"; then \
683 echo " (check DESTDIR support)"; \
684 fi ; \
685 $(distuninstallcheck_listfiles) ; \
686 exit 1; } >&2
687distcleancheck: distclean
688 @if test '$(srcdir)' = . ; then \
689 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
690 exit 1 ; \
691 fi
692 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
693 || { echo "ERROR: files left in build directory after distclean:" ; \
694 $(distcleancheck_listfiles) ; \
695 exit 1; } >&2
696check-am: all-am
697check: check-recursive
698all-am: Makefile config.h
699installdirs: installdirs-recursive
700installdirs-am:
701install: install-recursive
702install-exec: install-exec-recursive
703install-data: install-data-recursive
704uninstall: uninstall-recursive
705
706install-am: all-am
707 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
708
709installcheck: installcheck-recursive
710install-strip:
711 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
712 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
713 `test -z '$(STRIP)' || \
714 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
715mostlyclean-generic:
716
717clean-generic:
718
719distclean-generic:
720 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
721
722maintainer-clean-generic:
723 @echo "This command is intended for maintainers to use"
724 @echo "it deletes files that may require special tools to rebuild."
725clean: clean-recursive
726
727clean-am: clean-generic mostlyclean-am
728
729distclean: distclean-recursive
730 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
731 -rm -f Makefile
732distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
733
734dvi: dvi-recursive
735
736dvi-am:
737
738html: html-recursive
739
740info: info-recursive
741
742info-am:
743
744install-data-am:
745
746install-exec-am:
747
748install-info: install-info-recursive
749
750install-man:
751
752installcheck-am:
753
754maintainer-clean: maintainer-clean-recursive
755 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
756 -rm -rf $(top_srcdir)/autom4te.cache
757 -rm -f Makefile
758maintainer-clean-am: distclean-am maintainer-clean-generic
759
760mostlyclean: mostlyclean-recursive
761
762mostlyclean-am: mostlyclean-generic
763
764pdf: pdf-recursive
765
766pdf-am:
767
768ps: ps-recursive
769
770ps-am:
771
772uninstall-am: uninstall-info-am
773
774uninstall-info: uninstall-info-recursive
775
776.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
777 check-am clean clean-generic clean-recursive ctags \
778 ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
779 dist-shar dist-tarZ dist-zip distcheck distclean \
780 distclean-generic distclean-hdr distclean-recursive \
781 distclean-tags distcleancheck distdir distuninstallcheck dvi \
782 dvi-am html html-am info info-am install install-am \
783 install-data install-data-am install-exec install-exec-am \
784 install-info install-info-am install-man install-strip \
785 installcheck installcheck-am installdirs installdirs-am \
786 maintainer-clean maintainer-clean-generic \
787 maintainer-clean-recursive mostlyclean mostlyclean-generic \
788 mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
789 uninstall uninstall-am uninstall-info-am
790
791
792# CONFIG_CLEAN_FILES = gnulib/lib/regex.c
793
794# DISTCLEANFILES = intl/libintl.h
795
796dist-hook: jy-regex-fix findutils-check-pofiles findutils-check-testfiles
797
798jy-regex-fix:
799 if test -f $(distdir)/gnulib/lib/regex.c ; then \
800 echo regex.c is already in place. Great. ; \
801 else \
802 echo Making $(distdir)/gnulib/lib writable ... ; \
803 chmod +w $(distdir)/gnulib/lib ; \
804 echo Copying $(srcdir)/gnulib/lib/regex.c to $(distdir)/gnulib/lib ; \
805 cp $(srcdir)/gnulib/lib/regex.c $(distdir)/gnulib/lib/regex.c ; \
806 fi
807# ls -ld $(srcdir)/gnulib/lib/regex.c $(distdir)/gnulib/lib
808
809findutils-check-pofiles:
810 @echo ; echo Checking to see if we distributed the full set of .po files
811 distcount=`ls $(distdir)/po/*.po | wc -l` ; srccount=`ls $(srcdir)/po/*.po | wc -l` ; test $$distcount -eq $$srccount || ( echo FAILED: Please check the value of ALL_LINGUAS in configure.in against the actual set of ".po" files >&2 ; false )
812 @echo All .po files distributed OK.
813
814findutils-check-testfiles:
815 @echo ; echo Checking to see if we distributed the full set of .exp files
816 distcount=`ls $(distdir)/*/testsuite/*/*.exp | wc -l` && srccount=`ls $(srcdir)/*/testsuite/*/*.exp | wc -l` && echo source $$srccount distributed $$distcount && test $$distcount -eq $$srccount
817 @echo ; echo Checking to see if we distributed the full set of .xo files
818 distcount=`ls $(distdir)/*/testsuite/*/*.xo | wc -l` && srccount=`ls $(srcdir)/*/testsuite/*/*.xo | wc -l` && echo source $$srccount distributed $$distcount && test $$distcount -eq $$srccount
819 @echo ; echo Checking to see if we distributed the full set of .xe files
820 distcount=`ls $(distdir)/*/testsuite/*/*.xe | wc -l` && srccount=`ls $(srcdir)/*/testsuite/*/*.xe | wc -l` && echo source $$srccount distributed $$distcount && test $$distcount -eq $$srccount
821 @echo ; echo Checking to see if we distributed the full set of .xi files
822 distcount=`ls $(distdir)/*/testsuite/inputs/*.xi | wc -l` && srccount=`ls $(srcdir)/*/testsuite/inputs/*.xi | wc -l` && echo source $$srccount distributed $$distcount && test $$distcount -eq $$srccount
823# Tell versions [3.59,3.63) of GNU make to not export all variables.
824# Otherwise a system limit (for SysV at least) may be exceeded.
825.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.