source: trunk/essentials/app-arch/cpio/doc/Makefile.in

Last change on this file was 3332, checked in by bird, 18 years ago

cpio 2.7

File size: 21.8 KB
Line 
1# Makefile.in generated by automake 1.9.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005 Free Software Foundation, Inc.
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# This file is part of GNU cpio
18# Copyright (C) 2004 Free Software Foundation, Inc.
19#
20# This program is free software; you can redistribute it and/or modify
21# it under the terms of the GNU General Public License as published by
22# the Free Software Foundation; either version 2, or (at your option)
23# any later version.
24#
25# This program is distributed in the hope that it will be useful,
26# but WITHOUT ANY WARRANTY; without even the implied warranty of
27# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
28# GNU General Public License for more details.
29#
30# You should have received a copy of the GNU General Public License
31# along with this program; if not, write to the Free Software
32# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
33# 02110-1301 USA.
34srcdir = @srcdir@
35top_srcdir = @top_srcdir@
36VPATH = @srcdir@
37pkgdatadir = $(datadir)/@PACKAGE@
38pkglibdir = $(libdir)/@PACKAGE@
39pkgincludedir = $(includedir)/@PACKAGE@
40top_builddir = ..
41am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
42INSTALL = @INSTALL@
43install_sh_DATA = $(install_sh) -c -m 644
44install_sh_PROGRAM = $(install_sh) -c
45install_sh_SCRIPT = $(install_sh) -c
46INSTALL_HEADER = $(INSTALL_DATA)
47transform = $(program_transform_name)
48NORMAL_INSTALL = :
49PRE_INSTALL = :
50POST_INSTALL = :
51NORMAL_UNINSTALL = :
52PRE_UNINSTALL = :
53POST_UNINSTALL = :
54build_triplet = @build@
55host_triplet = @host@
56subdir = doc
57DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
58 $(srcdir)/stamp-vti $(srcdir)/version.texi
59ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
60am__aclocal_m4_deps = $(top_srcdir)/m4/absolute-header.m4 \
61 $(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/allocsa.m4 \
62 $(top_srcdir)/m4/argmatch.m4 $(top_srcdir)/m4/argp.m4 \
63 $(top_srcdir)/m4/bison.m4 $(top_srcdir)/m4/chdir-long.m4 \
64 $(top_srcdir)/m4/chown.m4 $(top_srcdir)/m4/clock_time.m4 \
65 $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \
66 $(top_srcdir)/m4/d-ino.m4 $(top_srcdir)/m4/dirname.m4 \
67 $(top_srcdir)/m4/dos.m4 $(top_srcdir)/m4/double-slash-root.m4 \
68 $(top_srcdir)/m4/eealloc.m4 $(top_srcdir)/m4/eoverflow.m4 \
69 $(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exitfail.m4 \
70 $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-safer.m4 \
71 $(top_srcdir)/m4/fcntl_h.m4 $(top_srcdir)/m4/fileblocks.m4 \
72 $(top_srcdir)/m4/fnmatch.m4 $(top_srcdir)/m4/fpending.m4 \
73 $(top_srcdir)/m4/getcwd-abort-bug.m4 \
74 $(top_srcdir)/m4/getcwd-path-max.m4 $(top_srcdir)/m4/getcwd.m4 \
75 $(top_srcdir)/m4/getdate.m4 $(top_srcdir)/m4/getopt.m4 \
76 $(top_srcdir)/m4/gettext_gl.m4 $(top_srcdir)/m4/gettime.m4 \
77 $(top_srcdir)/m4/gettimeofday.m4 $(top_srcdir)/m4/gnulib.m4 \
78 $(top_srcdir)/m4/hash.m4 $(top_srcdir)/m4/iconv.m4 \
79 $(top_srcdir)/m4/intmax_t.m4 $(top_srcdir)/m4/inttostr.m4 \
80 $(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \
81 $(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/lchown.m4 \
82 $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
83 $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/longdouble.m4 \
84 $(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/lstat.m4 \
85 $(top_srcdir)/m4/mbchar.m4 $(top_srcdir)/m4/mbiter.m4 \
86 $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbstate_t.m4 \
87 $(top_srcdir)/m4/memchr.m4 $(top_srcdir)/m4/mempcpy.m4 \
88 $(top_srcdir)/m4/memrchr.m4 $(top_srcdir)/m4/minmax.m4 \
89 $(top_srcdir)/m4/mktime.m4 $(top_srcdir)/m4/nls.m4 \
90 $(top_srcdir)/m4/onceonly_2_57.m4 $(top_srcdir)/m4/openat.m4 \
91 $(top_srcdir)/m4/paxutils.m4 $(top_srcdir)/m4/po.m4 \
92 $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quote.m4 \
93 $(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/rmt.m4 \
94 $(top_srcdir)/m4/rtapelib.m4 $(top_srcdir)/m4/safe-read.m4 \
95 $(top_srcdir)/m4/safe-write.m4 $(top_srcdir)/m4/save-cwd.m4 \
96 $(top_srcdir)/m4/savedir.m4 $(top_srcdir)/m4/setenv.m4 \
97 $(top_srcdir)/m4/signed.m4 $(top_srcdir)/m4/size_max.m4 \
98 $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stat-macros.m4 \
99 $(top_srcdir)/m4/stdarg.m4 $(top_srcdir)/m4/stdbool.m4 \
100 $(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdint_h.m4 \
101 $(top_srcdir)/m4/stpcpy.m4 $(top_srcdir)/m4/strcase.m4 \
102 $(top_srcdir)/m4/strchrnul.m4 $(top_srcdir)/m4/strndup.m4 \
103 $(top_srcdir)/m4/strnlen.m4 $(top_srcdir)/m4/strtol.m4 \
104 $(top_srcdir)/m4/sysexits.m4 $(top_srcdir)/m4/system.m4 \
105 $(top_srcdir)/m4/time_r.m4 $(top_srcdir)/m4/timespec.m4 \
106 $(top_srcdir)/m4/tm_gmtoff.m4 $(top_srcdir)/m4/unistd-safer.m4 \
107 $(top_srcdir)/m4/unistd_h.m4 $(top_srcdir)/m4/unlocked-io.m4 \
108 $(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/m4/utimens.m4 \
109 $(top_srcdir)/m4/utimes.m4 $(top_srcdir)/m4/vasnprintf.m4 \
110 $(top_srcdir)/m4/vsnprintf.m4 $(top_srcdir)/m4/wchar_t.m4 \
111 $(top_srcdir)/m4/wcwidth.m4 $(top_srcdir)/m4/wint_t.m4 \
112 $(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/xgetcwd.m4 \
113 $(top_srcdir)/m4/xsize.m4 $(top_srcdir)/m4/xstrndup.m4 \
114 $(top_srcdir)/configure.ac
115am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
116 $(ACLOCAL_M4)
117mkinstalldirs = $(SHELL) $(top_srcdir)/build-aux/mkinstalldirs
118CONFIG_HEADER = $(top_builddir)/config.h
119CONFIG_CLEAN_FILES =
120SOURCES =
121DIST_SOURCES =
122INFO_DEPS = $(srcdir)/cpio.info
123TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
124am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
125DVIS = cpio.dvi
126PDFS = cpio.pdf
127PSS = cpio.ps
128HTMLS = cpio.html
129TEXINFOS = cpio.texi
130TEXI2DVI = texi2dvi
131TEXI2PDF = $(TEXI2DVI) --pdf --batch
132MAKEINFOHTML = $(MAKEINFO) --html
133AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
134DVIPS = dvips
135am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
136man1dir = $(mandir)/man1
137NROFF = nroff
138MANS = $(man_MANS)
139DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
140ABSOLUTE_FCNTL_H = @ABSOLUTE_FCNTL_H@
141ABSOLUTE_INTTYPES_H = @ABSOLUTE_INTTYPES_H@
142ABSOLUTE_STDINT_H = @ABSOLUTE_STDINT_H@
143ACLOCAL = @ACLOCAL@
144ALLOCA = @ALLOCA@
145ALLOCA_H = @ALLOCA_H@
146AMDEP_FALSE = @AMDEP_FALSE@
147AMDEP_TRUE = @AMDEP_TRUE@
148AMTAR = @AMTAR@
149AUTOCONF = @AUTOCONF@
150AUTOHEADER = @AUTOHEADER@
151AUTOM4TE = @AUTOM4TE@
152AUTOMAKE = @AUTOMAKE@
153AWK = @AWK@
154BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
155BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
156BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
157BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
158BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
159CC = @CC@
160CCDEPMODE = @CCDEPMODE@
161CFLAGS = @CFLAGS@
162CPIO_MT_PROG = @CPIO_MT_PROG@
163CPP = @CPP@
164CPPFLAGS = @CPPFLAGS@
165CYGPATH_W = @CYGPATH_W@
166DEFAULT_RMT_COMMAND = @DEFAULT_RMT_COMMAND@
167DEFAULT_RMT_DIR = @DEFAULT_RMT_DIR@
168DEFS = @DEFS@
169DEPDIR = @DEPDIR@
170ECHO_C = @ECHO_C@
171ECHO_N = @ECHO_N@
172ECHO_T = @ECHO_T@
173EGREP = @EGREP@
174EOVERFLOW = @EOVERFLOW@
175EXEEXT = @EXEEXT@
176FCNTL_H = @FCNTL_H@
177FNMATCH_H = @FNMATCH_H@
178GETOPT_H = @GETOPT_H@
179GMSGFMT = @GMSGFMT@
180GMSGFMT_015 = @GMSGFMT_015@
181GREP = @GREP@
182HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@
183HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@
184HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@
185HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@
186HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
187HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
188HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
189HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
190HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
191HAVE_STDINT_H = @HAVE_STDINT_H@
192HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
193HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
194HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
195HAVE_WCHAR_H = @HAVE_WCHAR_H@
196HAVE__BOOL = @HAVE__BOOL@
197INSTALL_DATA = @INSTALL_DATA@
198INSTALL_PROGRAM = @INSTALL_PROGRAM@
199INSTALL_SCRIPT = @INSTALL_SCRIPT@
200INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
201INTLLIBS = @INTLLIBS@
202INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
203INTTYPES_H = @INTTYPES_H@
204LDFLAGS = @LDFLAGS@
205LIBICONV = @LIBICONV@
206LIBINTL = @LIBINTL@
207LIBOBJS = @LIBOBJS@
208LIBS = @LIBS@
209LIB_CLOCK_GETTIME = @LIB_CLOCK_GETTIME@
210LIB_SETSOCKOPT = @LIB_SETSOCKOPT@
211LTLIBICONV = @LTLIBICONV@
212LTLIBINTL = @LTLIBINTL@
213LTLIBOBJS = @LTLIBOBJS@
214MAKEINFO = @MAKEINFO@
215MSGFMT = @MSGFMT@
216MSGFMT_015 = @MSGFMT_015@
217MSGMERGE = @MSGMERGE@
218OBJEXT = @OBJEXT@
219PACKAGE = @PACKAGE@
220PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
221PACKAGE_NAME = @PACKAGE_NAME@
222PACKAGE_STRING = @PACKAGE_STRING@
223PACKAGE_TARNAME = @PACKAGE_TARNAME@
224PACKAGE_VERSION = @PACKAGE_VERSION@
225PATH_SEPARATOR = @PATH_SEPARATOR@
226POSUB = @POSUB@
227PRIPTR_PREFIX = @PRIPTR_PREFIX@
228PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@
229PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
230PU_RMT_PROG = @PU_RMT_PROG@
231RANLIB = @RANLIB@
232SET_MAKE = @SET_MAKE@
233SHELL = @SHELL@
234SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
235SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
236STDBOOL_H = @STDBOOL_H@
237STDINT_H = @STDINT_H@
238STRIP = @STRIP@
239SYSEXITS_H = @SYSEXITS_H@
240UNISTD_H = @UNISTD_H@
241USE_NLS = @USE_NLS@
242VERSION = @VERSION@
243WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
244WINT_T_SUFFIX = @WINT_T_SUFFIX@
245XGETTEXT = @XGETTEXT@
246XGETTEXT_015 = @XGETTEXT_015@
247YACC = @YACC@
248YFLAGS = @YFLAGS@
249ac_ct_CC = @ac_ct_CC@
250am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
251am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
252am__include = @am__include@
253am__leading_dot = @am__leading_dot@
254am__quote = @am__quote@
255am__tar = @am__tar@
256am__untar = @am__untar@
257bindir = @bindir@
258build = @build@
259build_alias = @build_alias@
260build_cpu = @build_cpu@
261build_os = @build_os@
262build_vendor = @build_vendor@
263datadir = @datadir@
264datarootdir = @datarootdir@
265docdir = @docdir@
266dvidir = @dvidir@
267exec_prefix = @exec_prefix@
268host = @host@
269host_alias = @host_alias@
270host_cpu = @host_cpu@
271host_os = @host_os@
272host_vendor = @host_vendor@
273htmldir = @htmldir@
274includedir = @includedir@
275infodir = @infodir@
276install_sh = @install_sh@
277libdir = @libdir@
278libexecdir = @libexecdir@
279localedir = @localedir@
280localstatedir = @localstatedir@
281mandir = @mandir@
282mkdir_p = @mkdir_p@
283oldincludedir = @oldincludedir@
284pdfdir = @pdfdir@
285prefix = @prefix@
286program_transform_name = @program_transform_name@
287psdir = @psdir@
288sbindir = @sbindir@
289sharedstatedir = @sharedstatedir@
290sysconfdir = @sysconfdir@
291target_alias = @target_alias@
292info_TEXINFOS = cpio.texi
293man_MANS = cpio.1 mt.1
294EXTRA_DIST = $(man_MANS) gendocs_template
295all: all-am
296
297.SUFFIXES:
298.SUFFIXES: .dvi .html .info .pdf .ps .texi
299$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
300 @for dep in $?; do \
301 case '$(am__configure_deps)' in \
302 *$$dep*) \
303 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
304 && exit 0; \
305 exit 1;; \
306 esac; \
307 done; \
308 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits doc/Makefile'; \
309 cd $(top_srcdir) && \
310 $(AUTOMAKE) --gnits doc/Makefile
311.PRECIOUS: Makefile
312Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
313 @case '$?' in \
314 *config.status*) \
315 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
316 *) \
317 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
318 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
319 esac;
320
321$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
322 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
323
324$(top_srcdir)/configure: $(am__configure_deps)
325 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
326$(ACLOCAL_M4): $(am__aclocal_m4_deps)
327 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
328
329.texi.info:
330 restore=: && backupdir="$(am__leading_dot)am$$$$" && \
331 am__cwd=`pwd` && cd $(srcdir) && \
332 rm -rf $$backupdir && mkdir $$backupdir && \
333 for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
334 if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
335 done; \
336 cd "$$am__cwd"; \
337 if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
338 -o $@ $<; \
339 then \
340 rc=0; \
341 cd $(srcdir); \
342 else \
343 rc=$$?; \
344 cd $(srcdir) && \
345 $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
346 fi; \
347 rm -rf $$backupdir; exit $$rc
348
349.texi.dvi:
350 TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
351 MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
352 $(TEXI2DVI) $<
353
354.texi.pdf:
355 TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
356 MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
357 $(TEXI2PDF) $<
358
359.texi.html:
360 rm -rf $(@:.html=.htp)
361 if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
362 -o $(@:.html=.htp) $<; \
363 then \
364 rm -rf $@; \
365 if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
366 mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
367 else \
368 if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
369 rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
370 exit 1; \
371 fi
372$(srcdir)/cpio.info: cpio.texi $(srcdir)/version.texi
373cpio.dvi: cpio.texi $(srcdir)/version.texi
374cpio.pdf: cpio.texi $(srcdir)/version.texi
375cpio.html: cpio.texi $(srcdir)/version.texi
376$(srcdir)/version.texi: $(srcdir)/stamp-vti
377$(srcdir)/stamp-vti: cpio.texi $(top_srcdir)/configure
378 @(dir=.; test -f ./cpio.texi || dir=$(srcdir); \
379 set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/cpio.texi`; \
380 echo "@set UPDATED $$1 $$2 $$3"; \
381 echo "@set UPDATED-MONTH $$2 $$3"; \
382 echo "@set EDITION $(VERSION)"; \
383 echo "@set VERSION $(VERSION)") > vti.tmp
384 @cmp -s vti.tmp $(srcdir)/version.texi \
385 || (echo "Updating $(srcdir)/version.texi"; \
386 cp vti.tmp $(srcdir)/version.texi)
387 -@rm -f vti.tmp
388 @cp $(srcdir)/version.texi $@
389
390mostlyclean-vti:
391 -rm -f vti.tmp
392
393maintainer-clean-vti:
394 -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
395.dvi.ps:
396 $(DVIPS) -o $@ $<
397
398uninstall-info-am:
399 @$(PRE_UNINSTALL)
400 @if (install-info --version && \
401 install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
402 list='$(INFO_DEPS)'; \
403 for file in $$list; do \
404 relfile=`echo "$$file" | sed 's|^.*/||'`; \
405 echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
406 install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
407 done; \
408 else :; fi
409 @$(NORMAL_UNINSTALL)
410 @list='$(INFO_DEPS)'; \
411 for file in $$list; do \
412 relfile=`echo "$$file" | sed 's|^.*/||'`; \
413 relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
414 (if cd "$(DESTDIR)$(infodir)"; then \
415 echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
416 rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
417 else :; fi); \
418 done
419
420dist-info: $(INFO_DEPS)
421 @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
422 list='$(INFO_DEPS)'; \
423 for base in $$list; do \
424 case $$base in \
425 $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
426 esac; \
427 if test -f $$base; then d=.; else d=$(srcdir); fi; \
428 for file in $$d/$$base*; do \
429 relfile=`expr "$$file" : "$$d/\(.*\)"`; \
430 test -f $(distdir)/$$relfile || \
431 cp -p $$file $(distdir)/$$relfile; \
432 done; \
433 done
434
435mostlyclean-aminfo:
436 -rm -rf cpio.aux cpio.cp cpio.cps cpio.fn cpio.fns cpio.ky cpio.kys cpio.log \
437 cpio.pg cpio.pgs cpio.tmp cpio.toc cpio.tp cpio.tps cpio.vr \
438 cpio.vrs cpio.dvi cpio.pdf cpio.ps cpio.html
439
440maintainer-clean-aminfo:
441 @list='$(INFO_DEPS)'; for i in $$list; do \
442 i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
443 echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
444 rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
445 done
446install-man1: $(man1_MANS) $(man_MANS)
447 @$(NORMAL_INSTALL)
448 test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
449 @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
450 l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
451 for i in $$l2; do \
452 case "$$i" in \
453 *.1*) list="$$list $$i" ;; \
454 esac; \
455 done; \
456 for i in $$list; do \
457 if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
458 else file=$$i; fi; \
459 ext=`echo $$i | sed -e 's/^.*\\.//'`; \
460 case "$$ext" in \
461 1*) ;; \
462 *) ext='1' ;; \
463 esac; \
464 inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
465 inst=`echo $$inst | sed -e 's/^.*\///'`; \
466 inst=`echo $$inst | sed '$(transform)'`.$$ext; \
467 echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
468 $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
469 done
470uninstall-man1:
471 @$(NORMAL_UNINSTALL)
472 @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
473 l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
474 for i in $$l2; do \
475 case "$$i" in \
476 *.1*) list="$$list $$i" ;; \
477 esac; \
478 done; \
479 for i in $$list; do \
480 ext=`echo $$i | sed -e 's/^.*\\.//'`; \
481 case "$$ext" in \
482 1*) ;; \
483 *) ext='1' ;; \
484 esac; \
485 inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
486 inst=`echo $$inst | sed -e 's/^.*\///'`; \
487 inst=`echo $$inst | sed '$(transform)'`.$$ext; \
488 echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
489 rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
490 done
491tags: TAGS
492TAGS:
493
494ctags: CTAGS
495CTAGS:
496
497
498distdir: $(DISTFILES)
499 @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
500 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
501 list='$(DISTFILES)'; for file in $$list; do \
502 case $$file in \
503 $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
504 $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
505 esac; \
506 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
507 dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
508 if test "$$dir" != "$$file" && test "$$dir" != "."; then \
509 dir="/$$dir"; \
510 $(mkdir_p) "$(distdir)$$dir"; \
511 else \
512 dir=''; \
513 fi; \
514 if test -d $$d/$$file; then \
515 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
516 cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
517 fi; \
518 cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
519 else \
520 test -f $(distdir)/$$file \
521 || cp -p $$d/$$file $(distdir)/$$file \
522 || exit 1; \
523 fi; \
524 done
525 $(MAKE) $(AM_MAKEFLAGS) \
526 top_distdir="$(top_distdir)" distdir="$(distdir)" \
527 dist-info
528check-am: all-am
529check: check-am
530all-am: Makefile $(INFO_DEPS) $(MANS)
531installdirs:
532 for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
533 test -z "$$dir" || $(mkdir_p) "$$dir"; \
534 done
535install: install-am
536install-exec: install-exec-am
537install-data: install-data-am
538uninstall: uninstall-am
539
540install-am: all-am
541 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
542
543installcheck: installcheck-am
544install-strip:
545 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
546 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
547 `test -z '$(STRIP)' || \
548 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
549mostlyclean-generic:
550
551clean-generic:
552
553distclean-generic:
554 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
555
556maintainer-clean-generic:
557 @echo "This command is intended for maintainers to use"
558 @echo "it deletes files that may require special tools to rebuild."
559clean: clean-am
560
561clean-am: clean-generic mostlyclean-am
562
563distclean: distclean-am
564 -rm -f Makefile
565distclean-am: clean-am distclean-generic
566
567dvi: dvi-am
568
569dvi-am: $(DVIS)
570
571html: html-am
572
573html-am: $(HTMLS)
574
575info: info-am
576
577info-am: $(INFO_DEPS)
578
579install-data-am: install-info-am install-man
580
581install-exec-am:
582
583install-info: install-info-am
584
585install-info-am: $(INFO_DEPS)
586 @$(NORMAL_INSTALL)
587 test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
588 @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
589 list='$(INFO_DEPS)'; \
590 for file in $$list; do \
591 case $$file in \
592 $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
593 esac; \
594 if test -f $$file; then d=.; else d=$(srcdir); fi; \
595 file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
596 for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
597 $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
598 if test -f $$ifile; then \
599 relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
600 echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
601 $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
602 else : ; fi; \
603 done; \
604 done
605 @$(POST_INSTALL)
606 @if (install-info --version && \
607 install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
608 list='$(INFO_DEPS)'; \
609 for file in $$list; do \
610 relfile=`echo "$$file" | sed 's|^.*/||'`; \
611 echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
612 install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
613 done; \
614 else : ; fi
615install-man: install-man1
616
617installcheck-am:
618
619maintainer-clean: maintainer-clean-am
620 -rm -f Makefile
621maintainer-clean-am: distclean-am maintainer-clean-aminfo \
622 maintainer-clean-generic maintainer-clean-vti
623
624mostlyclean: mostlyclean-am
625
626mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
627
628pdf: pdf-am
629
630pdf-am: $(PDFS)
631
632ps: ps-am
633
634ps-am: $(PSS)
635
636uninstall-am: uninstall-info-am uninstall-man
637
638uninstall-man: uninstall-man1
639
640.PHONY: all all-am check check-am clean clean-generic dist-info \
641 distclean distclean-generic distdir dvi dvi-am html html-am \
642 info info-am install install-am install-data install-data-am \
643 install-exec install-exec-am install-info install-info-am \
644 install-man install-man1 install-strip installcheck \
645 installcheck-am installdirs maintainer-clean \
646 maintainer-clean-aminfo maintainer-clean-generic \
647 maintainer-clean-vti mostlyclean mostlyclean-aminfo \
648 mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \
649 uninstall uninstall-am uninstall-info-am uninstall-man \
650 uninstall-man1
651
652
653# Make sure you set TEXINPUT
654manual:
655 TEXINPUTS=$(srcdir):$(top_srcdir)/scripts:$$TEXINPUTS \
656 gendocs.sh cpio 'GNU cpio manual'
657# Tell versions [3.59,3.63) of GNU make to not export all variables.
658# Otherwise a system limit (for SysV at least) may be exceeded.
659.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.