source: trunk/diffutils/po/Makefile.in.in@ 2946

Last change on this file since 2946 was 2643, checked in by bird, 20 years ago

drive specs.
File size: 10.2 KB
Line 
1# Makefile for PO directory in any package using GNU gettext.
2# Copyright (C) 1995-1997, 2000-2002 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
3#
4# This file can be copied and used freely without restrictions. It can
5# be used in projects which are not available under the GNU General Public
6# License but which still want to provide support for the GNU gettext
7# functionality.
8# Please note that the actual code of GNU gettext is covered by the GNU
9# General Public License and is *not* in the public domain.
10
11PACKAGE = @PACKAGE@
12VERSION = @VERSION@
13
14SHELL = /bin/sh
15@SET_MAKE@
16
17srcdir = @srcdir@
18top_srcdir = @top_srcdir@
19VPATH = @srcdir@
20
21prefix = @prefix@
22exec_prefix = @exec_prefix@
23datadir = @datadir@
24localedir = $(datadir)/locale
25gettextsrcdir = $(datadir)/gettext/po
26
27INSTALL = @INSTALL@
28INSTALL_DATA = @INSTALL_DATA@
29MKINSTALLDIRS = @MKINSTALLDIRS@
30mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in [/\\]* | [a-zA-Z]:*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac`
31
32GMSGFMT = @GMSGFMT@
33MSGFMT = @MSGFMT@
34XGETTEXT = @XGETTEXT@
35MSGMERGE = msgmerge
36MSGMERGE_UPDATE = @MSGMERGE@ --update
37MSGINIT = msginit
38MSGCONV = msgconv
39MSGFILTER = msgfilter
40
41POFILES = @POFILES@
42GMOFILES = @GMOFILES@
43UPDATEPOFILES = @UPDATEPOFILES@
44DUMMYPOFILES = @DUMMYPOFILES@
45DISTFILES.common = Makefile.in.in Makevars remove-potcdate.sin \
46$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
47DISTFILES = $(DISTFILES.common) POTFILES.in $(DOMAIN).pot \
48$(POFILES) $(GMOFILES) \
49$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
50
51POTFILES = \
52
53CATALOGS = @CATALOGS@
54
55# Makevars gets inserted here. (Don't remove this line!)
56
57.SUFFIXES:
58.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
59
60.po.mo:
61 @echo "$(MSGFMT) -c -o $@ $<"; \
62 $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
63
64.po.gmo:
65 @lang=`echo $* | sed -e 's,.*/,,'`; \
66 test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
67 echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
68 cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
69
70.sin.sed:
71 sed -e '/^#/d' $< > t-$@
72 mv t-$@ $@
73
74
75all: all-@USE_NLS@
76
77all-yes: $(CATALOGS)
78all-no:
79
80# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
81# otherwise packages like GCC can not be built if only parts of the source
82# have been downloaded.
83
84$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
85 $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
86 --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
87 --files-from=$(srcdir)/POTFILES.in \
88 --copyright-holder='$(COPYRIGHT_HOLDER)'
89 test ! -f $(DOMAIN).po || { \
90 if test -f $(srcdir)/$(DOMAIN).pot; then \
91 sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
92 sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
93 if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
94 rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
95 else \
96 rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
97 mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
98 fi; \
99 else \
100 mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
101 fi; \
102 }
103
104$(srcdir)/$(DOMAIN).pot:
105 $(MAKE) $(DOMAIN).pot-update
106
107$(POFILES): $(srcdir)/$(DOMAIN).pot
108 @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
109 test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
110 echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
111 cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
112
113
114install: install-exec install-data
115install-exec:
116install-data: install-data-@USE_NLS@
117 if test "$(PACKAGE)" = "gettext"; then \
118 $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
119 for file in $(DISTFILES.common); do \
120 $(INSTALL_DATA) $(srcdir)/$$file \
121 $(DESTDIR)$(gettextsrcdir)/$$file; \
122 done; \
123 else \
124 : ; \
125 fi
126install-data-no: all
127install-data-yes: all
128 $(mkinstalldirs) $(DESTDIR)$(datadir)
129 @catalogs='$(CATALOGS)'; \
130 for cat in $$catalogs; do \
131 cat=`basename $$cat`; \
132 lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
133 dir=$(localedir)/$$lang/LC_MESSAGES; \
134 $(mkinstalldirs) $(DESTDIR)$$dir; \
135 if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
136 $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
137 echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
138 for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
139 if test -n "$$lc"; then \
140 if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
141 link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
142 mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
143 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
144 (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
145 for file in *; do \
146 if test -f $$file; then \
147 ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
148 fi; \
149 done); \
150 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
151 else \
152 if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
153 :; \
154 else \
155 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
156 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
157 fi; \
158 fi; \
159 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
160 ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
161 ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
162 cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
163 echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
164 fi; \
165 done; \
166 done
167
168install-strip: install
169
170installdirs: installdirs-exec installdirs-data
171installdirs-exec:
172installdirs-data: installdirs-data-@USE_NLS@
173 if test "$(PACKAGE)" = "gettext"; then \
174 $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
175 else \
176 : ; \
177 fi
178installdirs-data-no:
179installdirs-data-yes:
180 $(mkinstalldirs) $(DESTDIR)$(datadir)
181 @catalogs='$(CATALOGS)'; \
182 for cat in $$catalogs; do \
183 cat=`basename $$cat`; \
184 lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
185 dir=$(localedir)/$$lang/LC_MESSAGES; \
186 $(mkinstalldirs) $(DESTDIR)$$dir; \
187 for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
188 if test -n "$$lc"; then \
189 if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
190 link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
191 mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
192 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
193 (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
194 for file in *; do \
195 if test -f $$file; then \
196 ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
197 fi; \
198 done); \
199 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
200 else \
201 if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
202 :; \
203 else \
204 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
205 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
206 fi; \
207 fi; \
208 fi; \
209 done; \
210 done
211
212# Define this as empty until I found a useful application.
213installcheck:
214
215uninstall: uninstall-exec uninstall-data
216uninstall-exec:
217uninstall-data: uninstall-data-@USE_NLS@
218 if test "$(PACKAGE)" = "gettext"; then \
219 for file in $(DISTFILES.common); do \
220 rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
221 done; \
222 else \
223 : ; \
224 fi
225uninstall-data-no:
226uninstall-data-yes:
227 catalogs='$(CATALOGS)'; \
228 for cat in $$catalogs; do \
229 cat=`basename $$cat`; \
230 lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
231 for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
232 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
233 done; \
234 done
235
236check: all
237
238dvi info tags TAGS ID:
239
240mostlyclean:
241 rm -f remove-potcdate.sed
242 rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
243 rm -fr *.o
244
245clean: mostlyclean
246
247distclean: clean
248 rm -f Makefile Makefile.in POTFILES *.mo
249
250maintainer-clean: distclean
251 @echo "This command is intended for maintainers to use;"
252 @echo "it deletes files that may require special tools to rebuild."
253 rm -f $(GMOFILES)
254
255distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
256dist distdir:
257 $(MAKE) update-po
258 @$(MAKE) dist2
259# This is a separate target because 'update-po' must be executed before.
260dist2: $(DISTFILES)
261 dists="$(DISTFILES)"; \
262 if test -f $(srcdir)/ChangeLog; then dists="$$dists ChangeLog"; fi; \
263 if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
264 for file in $$dists; do \
265 if test -f $$file; then \
266 cp -p $$file $(distdir); \
267 else \
268 cp -p $(srcdir)/$$file $(distdir); \
269 fi; \
270 done
271
272update-po: Makefile
273 $(MAKE) $(DOMAIN).pot-update
274 $(MAKE) $(UPDATEPOFILES)
275 $(MAKE) update-gmo
276
277# General rule for updating PO files.
278
279.nop.po-update:
280 @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
281 if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; fi; \
282 tmpdir=`pwd`; \
283 echo "$$lang:"; \
284 test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
285 echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
286 cd $(srcdir); \
287 if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
288 if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
289 rm -f $$tmpdir/$$lang.new.po; \
290 else \
291 if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
292 :; \
293 else \
294 echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
295 exit 1; \
296 fi; \
297 fi; \
298 else \
299 echo "msgmerge for $$lang.po failed!" 1>&2; \
300 rm -f $$tmpdir/$$lang.new.po; \
301 fi
302
303$(DUMMYPOFILES):
304
305update-gmo: Makefile $(GMOFILES)
306 @:
307
308Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in
309 cd $(top_builddir) \
310 && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
311 $(SHELL) ./config.status
312
313force:
314
315# Tell versions [3.59,3.63) of GNU make not to export all variables.
316# Otherwise a system limit (for SysV at least) may be exceeded.
317.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.