source: trunk/binutils/opcodes/configure.in@ 2747

dnl Process this file with autoconf to produce a configure script.
dnl

AC_PREREQ(2.13)
AC_INIT(z8k-dis.c)

AC_CANONICAL_SYSTEM
AC_ISC_POSIX

# We currently only use the version number for the name of any shared
# library.  For user convenience, we always use the same version
# number that BFD is using.
changequote(,)dnl
BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[         ]*\([^  ]*\)[   ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
changequote([,])dnl

AM_INIT_AUTOMAKE(opcodes, ${BFD_VERSION})

dnl These must be called before AM_PROG_LIBTOOL, because it may want
dnl to call AC_CHECK_PROG.
AC_CHECK_TOOL(AR, ar)
AC_CHECK_TOOL(RANLIB, ranlib, :)

dnl Default to a non shared library.  This may be overridden by the
dnl configure option --enable-shared.
AM_DISABLE_SHARED

AM_PROG_LIBTOOL

AC_ARG_ENABLE(targets,
[  --enable-targets        alternative target configurations],
[case "${enableval}" in
  yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
            ;;
  no)       enable_targets= ;;
  *)        enable_targets=$enableval ;;
esac])dnl
AC_ARG_ENABLE(commonbfdlib,
[  --enable-commonbfdlib   build shared BFD/opcodes/libiberty library],
[case "${enableval}" in
  yes) commonbfdlib=true ;;
  no)  commonbfdlib=false ;;
  *)   AC_MSG_ERROR([bad value ${enableval} for opcodes commonbfdlib option]) ;;
esac])dnl

build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
AC_ARG_ENABLE(build-warnings,
[  --enable-build-warnings Enable build-time compiler warnings if gcc is used],
[case "${enableval}" in
  yes)  ;;
  no)   build_warnings="-w";;
  ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
        build_warnings="${build_warnings} ${t}";;
  *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
        build_warnings="${t} ${build_warnings}";;
  *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
  echo "Setting warning flags = $build_warnings" 6>&1
fi])dnl
WARN_CFLAGS=""
if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
    WARN_CFLAGS="${build_warnings}"
fi
AC_SUBST(WARN_CFLAGS)

AM_CONFIG_HEADER(config.h:config.in)

if test -z "$target" ; then
    AC_MSG_ERROR(Unrecognized target system type; please check config.sub.)
fi

AM_MAINTAINER_MODE
AM_INSTALL_LIBBFD
AC_EXEEXT

# host-specific stuff:

AC_PROG_CC

ALL_LINGUAS="fr sv es da de id pt_BR ro"
CY_GNU_GETTEXT

. ${srcdir}/../bfd/configure.host

BFD_CC_FOR_BUILD

AC_SUBST(HDEFINES)
AC_PROG_INSTALL

AC_CHECK_HEADERS(string.h strings.h stdlib.h)

cgen_maint=no
cgendir='$(srcdir)/../cgen'

AC_ARG_ENABLE(cgen-maint,
[  --enable-cgen-maint[=dir]    build cgen generated files],
[case "${enableval}" in
  yes)  cgen_maint=yes ;;
  no)   cgen_maint=no ;;
  *)
        # argument is cgen install directory (not implemented yet).
        # Having a `share' directory might be more appropriate for the .scm,
        # .cpu, etc. files.
        cgen_maint=yes
        cgendir=${cgen_maint}/lib/cgen
        ;;
esac])dnl
AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} = xyes)
AC_SUBST(cgendir)

using_cgen=no

# Horrible hacks to build DLLs on Windows.
WIN32LDFLAGS=
WIN32LIBADD=
case "${host}" in
*-*-cygwin*)
  if test "$enable_shared" = "yes"; then
    WIN32LDFLAGS="-no-undefined"
    WIN32LIBADD="-L`pwd`/../bfd -lbfd -L`pwd`/../libiberty -liberty -L`pwd`/../intl -lintl -lcygwin"
  fi
  ;;
*-*-os2*)
  if test "$enable_shared" = "yes"; then
    WIN32LDFLAGS="-no-undefined"
    WIN32LIBADD="-L`pwd`/../bfd -lbfd -L`pwd`/../libiberty -liberty"
#    WIN32LIBADD="-L`pwd`/../bfd -lbfd -L`pwd`/../libiberty -liberty -L`pwd`/../intl -lintl"
  fi
  ;;
esac
AC_SUBST(WIN32LDFLAGS)
AC_SUBST(WIN32LIBADD)

# target-specific stuff:

# Canonicalize the secondary target names.
if test -n "$enable_targets" ; then
    for targ in `echo $enable_targets | sed 's/,/ /g'`
    do
        result=`$ac_config_sub $targ 2>/dev/null`
        if test -n "$result" ; then
            canon_targets="$canon_targets $result"
        else
            # Allow targets that config.sub doesn't recognize, like "all".
            canon_targets="$canon_targets $targ"
        fi
    done
fi

all_targets=false
selarchs=
for targ in $target $canon_targets
do
    if test "x$targ" = "xall" ; then
        all_targets=true
    else
        . $srcdir/../bfd/config.bfd
        selarchs="$selarchs $targ_archs"
    fi
done    

# Utility var, documents generic cgen support files.

cgen_files="cgen-opc.lo cgen-asm.lo cgen-dis.lo"

# We don't do any links based on the target system, just makefile config.

if test x${all_targets} = xfalse ; then

    # Target architecture .o files.
    ta=

    for arch in $selarchs
    do
        ad=`echo $arch | sed -e s/bfd_//g -e s/_arch//g`
        archdefs="$archdefs -DARCH_$ad"
        case "$arch" in
        bfd_a29k_arch)          ta="$ta a29k-dis.lo" ;;
        bfd_alliant_arch)       ;;
        bfd_alpha_arch)         ta="$ta alpha-dis.lo alpha-opc.lo" ;;
        bfd_arc_arch)           ta="$ta arc-dis.lo arc-opc.lo arc-ext.lo" ;;
        bfd_arm_arch)           ta="$ta arm-dis.lo" ;;
        bfd_avr_arch)           ta="$ta avr-dis.lo" ;;
        bfd_convex_arch)        ;;
        bfd_cris_arch)          ta="$ta cris-dis.lo cris-opc.lo" ;;
        bfd_d10v_arch)          ta="$ta d10v-dis.lo d10v-opc.lo" ;;
        bfd_d30v_arch)          ta="$ta d30v-dis.lo d30v-opc.lo" ;;
        bfd_dlx_arch)           ta="$ta dlx-dis.lo" ;;
        bfd_fr30_arch)          ta="$ta fr30-asm.lo fr30-desc.lo fr30-dis.lo fr30-ibld.lo fr30-opc.lo" using_cgen=yes ;;
        bfd_h8300_arch)         ta="$ta h8300-dis.lo" ;;
        bfd_h8500_arch)         ta="$ta h8500-dis.lo" ;;
        bfd_hppa_arch)          ta="$ta hppa-dis.lo" ;;
        bfd_i370_arch)          ta="$ta i370-dis.lo i370-opc.lo" ;;
        bfd_i386_arch)          ta="$ta i386-dis.lo" ;;
        bfd_i860_arch)          ta="$ta i860-dis.lo" ;;
        bfd_i960_arch)          ta="$ta i960-dis.lo" ;;
        bfd_ia64_arch)          ta="$ta ia64-dis.lo ia64-opc.lo" ;;
        bfd_ip2k_arch)          ta="$ta ip2k-asm.lo ip2k-desc.lo ip2k-dis.lo ip2k-ibld.lo ip2k-opc.lo" using_cgen=yes ;;
        bfd_iq2000_arch)        ta="$ta iq2000-asm.lo iq2000-desc.lo iq2000-dis.lo iq2000-ibld.lo iq2000-opc.lo" using_cgen=yes ;;
        bfd_m32r_arch)          ta="$ta m32r-asm.lo m32r-desc.lo m32r-dis.lo m32r-ibld.lo m32r-opc.lo m32r-opinst.lo" using_cgen=yes ;;
        bfd_m68hc11_arch)       ta="$ta m68hc11-dis.lo m68hc11-opc.lo" ;;
        bfd_m68hc12_arch)       ta="$ta m68hc11-dis.lo m68hc11-opc.lo" ;;
        bfd_m68k_arch)          ta="$ta m68k-dis.lo m68k-opc.lo" ;;
        bfd_m88k_arch)          ta="$ta m88k-dis.lo" ;;
        bfd_mcore_arch)         ta="$ta mcore-dis.lo" ;;
        bfd_mips_arch)          ta="$ta mips-dis.lo mips-opc.lo mips16-opc.lo" ;;
        bfd_mmix_arch)          ta="$ta mmix-dis.lo mmix-opc.lo" ;;
        bfd_mn10200_arch)       ta="$ta m10200-dis.lo m10200-opc.lo" ;;
        bfd_mn10300_arch)       ta="$ta m10300-dis.lo m10300-opc.lo" ;;
        bfd_msp430_arch)        ta="$ta msp430-dis.lo" ;;
        bfd_ns32k_arch)         ta="$ta ns32k-dis.lo" ;;
        bfd_openrisc_arch)      ta="$ta openrisc-asm.lo openrisc-desc.lo openrisc-dis.lo openrisc-ibld.lo openrisc-opc.lo" using_cgen=yes ;;
        bfd_or32_arch)          ta="$ta or32-dis.lo or32-opc.lo" using_cgen=yes ;;
        bfd_pdp11_arch)         ta="$ta pdp11-dis.lo pdp11-opc.lo" ;;
        bfd_pj_arch)            ta="$ta pj-dis.lo pj-opc.lo" ;;
        bfd_powerpc_arch)       ta="$ta ppc-dis.lo ppc-opc.lo" ;;
        bfd_powerpc_64_arch)    ta="$ta ppc-dis.lo ppc-opc.lo" ;;
        bfd_pyramid_arch)       ;;
        bfd_romp_arch)          ;;
        bfd_rs6000_arch)        ta="$ta ppc-dis.lo ppc-opc.lo" ;;
        bfd_s390_arch)          ta="$ta s390-dis.lo s390-opc.lo" ;;
        bfd_sh_arch)
          # We can't decide what we want just from the CPU family.
          # We want SH5 support unless a specific version of sh is
          # specified, as in sh3-elf, sh3b-linux-gnu, etc.
          # Include it just for ELF targets, since the SH5 bfd:s are ELF only.
          for t in $target $canon_targets; do
            case $t in
              all |  sh5*-* | sh64*-* | sh-*-*elf* | shl*-*-*elf* | \
              sh-*-linux* | shl-*-linux*)
                                ta="$ta sh64-dis.lo sh64-opc.lo"
                                archdefs="$archdefs -DINCLUDE_SHMEDIA"
                                break;;
            esac;
          done
                                ta="$ta sh-dis.lo" ;;
        bfd_sparc_arch)         ta="$ta sparc-dis.lo sparc-opc.lo" ;;
        bfd_tahoe_arch)         ;;
        bfd_tic30_arch)         ta="$ta tic30-dis.lo" ;;
        bfd_tic4x_arch)         ta="$ta tic4x-dis.lo" ;;
        bfd_tic54x_arch)        ta="$ta tic54x-dis.lo tic54x-opc.lo" ;;
        bfd_tic80_arch)         ta="$ta tic80-dis.lo tic80-opc.lo" ;;
        bfd_v850_arch)          ta="$ta v850-opc.lo v850-dis.lo" ;;
        bfd_v850e_arch)         ta="$ta v850-opc.lo v850-dis.lo" ;;
        bfd_v850ea_arch)        ta="$ta v850-opc.lo v850-dis.lo" ;;
        bfd_vax_arch)           ta="$ta vax-dis.lo" ;;
        bfd_w65_arch)           ta="$ta w65-dis.lo" ;;
        bfd_we32k_arch)         ;;
        bfd_xstormy16_arch)     ta="$ta xstormy16-asm.lo xstormy16-desc.lo xstormy16-dis.lo xstormy16-ibld.lo xstormy16-opc.lo" using_cgen=yes ;;
        bfd_xtensa_arch)        ta="$ta xtensa-dis.lo" ;;
        bfd_z8k_arch)           ta="$ta z8k-dis.lo" ;;
        bfd_frv_arch)           ta="$ta frv-asm.lo frv-desc.lo frv-dis.lo frv-ibld.lo frv-opc.lo" using_cgen=yes ;;

        "")                     ;;
        *)              AC_MSG_ERROR(*** unknown target architecture $arch) ;;
        esac
    done

    if test $using_cgen = yes ; then
        ta="$ta $cgen_files"
    fi

    # Weed out duplicate .o files.
    f=""
    for i in $ta ; do
        case " $f " in
        *" $i "*) ;;
        *) f="$f $i" ;;
        esac
    done
    ta="$f"

    # And duplicate -D flags.
    f=""
    for i in $archdefs ; do
        case " $f " in
        *" $i "*) ;;
        *) f="$f $i" ;;
        esac
    done
    archdefs="$f"

    BFD_MACHINES="$ta"

else    # all_targets is true
    archdefs=-DARCH_all
    BFD_MACHINES='$(ALL_MACHINES)'
fi

AC_SUBST(archdefs)
AC_SUBST(BFD_MACHINES)

AC_OUTPUT(Makefile po/Makefile.in:po/Make-in,
[sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile])