source: trunk/binutils/include/opcode/m88k.h@ 3158

Last change on this file since 3158 was 610, checked in by bird, 22 years ago

This commit was generated by cvs2svn to compensate for changes in r609,
which included commits to RCS files with non-trunk default branches.
  • Property cvs2svn:cvs-rev set to 1.1.1.2
  • Property svn:eol-style set to native
  • Property svn:executable set to *
File size: 10.8 KB
Line 
1/* Table of opcodes for the Motorola M88k family.
2 Copyright 1989, 1990, 1991, 1993, 2001 Free Software Foundation, Inc.
3
4This file is part of GDB and GAS.
5
6This program is free software; you can redistribute it and/or modify
7it under the terms of the GNU General Public License as published by
8the Free Software Foundation; either version 2 of the License, or
9(at your option) any later version.
10
11This program is distributed in the hope that it will be useful,
12but WITHOUT ANY WARRANTY; without even the implied warranty of
13MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14GNU General Public License for more details.
15
16You should have received a copy of the GNU General Public License
17along with this program; if not, write to the Free Software
18Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
19
20/*
21 * Disassembler Instruction Table
22 *
23 * The first field of the table is the opcode field. If an opcode
24 * is specified which has any non-opcode bits on, a system error
25 * will occur when the system attempts the install it into the
26 * instruction table. The second parameter is a pointer to the
27 * instruction mnemonic. Each operand is specified by offset, width,
28 * and type. The offset is the bit number of the least significant
29 * bit of the operand with bit 0 being the least significant bit of
30 * the instruction. The width is the number of bits used to specify
31 * the operand. The type specifies the output format to be used for
32 * the operand. The valid formats are: register, register indirect,
33 * hex constant, and bit field specification. The last field is a
34 * pointer to the next instruction in the linked list. These pointers
35 * are initialized by init_disasm().
36 *
37 * Revision History
38 *
39 * Revision 1.0 11/08/85 Creation date
40 * 1.1 02/05/86 Updated instruction mnemonic table MD
41 * 1.2 06/16/86 Updated SIM_FLAGS for floating point
42 * 1.3 09/20/86 Updated for new encoding
43 * 05/11/89 R. Trawick adapted from Motorola disassembler
44 */
45
46#include <stdio.h>
47
48/* Define the number of bits in the primary opcode field of the instruction,
49 the destination field, the source 1 and source 2 fields. */
50
51/* Size of opcode field. */
52#define OP 8
53
54/* Size of destination. */
55#define DEST 6
56
57/* Size of source1. */
58#define SOURCE1 6
59
60/* Size of source2. */
61#define SOURCE2 6
62
63/* Number of registers. */
64#define REGs 32
65
66/* Type definitions. */
67
68typedef unsigned int UINT;
69#define WORD long
70#define FLAG unsigned
71#define STATE short
72
73/* The next four equates define the priorities that the various classes
74 * of instructions have regarding writing results back into registers and
75 * signalling exceptions. */
76
77/* PMEM is also defined in <sys/param.h> on Delta 88's. Sigh! */
78#undef PMEM
79
80/* Integer priority. */
81#define PINT 0
82
83/* Floating point priority. */
84#define PFLT 1
85
86/* Memory priority. */
87#define PMEM 2
88
89/* Not applicable, instruction doesn't write to regs. */
90#define NA 3
91
92/* Highest of these priorities. */
93#define HIPRI 3
94
95/* The instruction registers are an artificial mechanism to speed up
96 * simulator execution. In the real processor, an instruction register
97 * is 32 bits wide. In the simulator, the 32 bit instruction is kept in
98 * a structure field called rawop, and the instruction is partially decoded,
99 * and split into various fields and flags which make up the other fields
100 * of the structure.
101 * The partial decode is done when the instructions are initially loaded
102 * into simulator memory. The simulator code memory is not an array of
103 * 32 bit words, but is an array of instruction register structures.
104 * Yes this wastes memory, but it executes much quicker.
105 */
106
107struct IR_FIELDS
108{
109 unsigned op:OP,
110 dest: DEST,
111 src1: SOURCE1,
112 src2: SOURCE2;
113 int ltncy,
114 extime,
115 /* Writeback priority. */
116 wb_pri;
117 /* Immediate size. */
118 unsigned imm_flags:2,
119 /* Register source 1 used. */
120 rs1_used:1,
121 /* Register source 2 used. */
122 rs2_used:1,
123 /* Register source/dest. used. */
124 rsd_used:1,
125 /* Complement. */
126 c_flag:1,
127 /* Upper half word. */
128 u_flag:1,
129 /* Execute next. */
130 n_flag:1,
131 /* Uses writeback slot. */
132 wb_flag:1,
133 /* Dest size. */
134 dest_64:1,
135 /* Source 1 size. */
136 s1_64:1,
137 /* Source 2 size. */
138 s2_64:1,
139 scale_flag:1,
140 /* Scaled register. */
141 brk_flg:1;
142};
143
144struct mem_segs
145{
146 /* Pointer (returned by calloc) to segment. */
147 struct mem_wrd *seg;
148
149 /* Base load address from file headers. */
150 unsigned long baseaddr;
151
152 /* Ending address of segment. */
153 unsigned long endaddr;
154
155 /* Segment control flags (none defined). */
156 int flags;
157};
158
159#define MAXSEGS (10) /* max number of segment allowed */
160#define MEMSEGSIZE (sizeof(struct mem_segs))/* size of mem_segs structure */
161
162#if 0
163#define BRK_RD (0x01) /* break on memory read */
164#define BRK_WR (0x02) /* break on memory write */
165#define BRK_EXEC (0x04) /* break on execution */
166#define BRK_CNT (0x08) /* break on terminal count */
167#endif
168
169struct mem_wrd
170{
171 /* Simulator instruction break down. */
172 struct IR_FIELDS opcode;
173 union {
174 /* Memory element break down. */
175 unsigned long l;
176 unsigned short s[2];
177 unsigned char c[4];
178 } mem;
179};
180
181/* Size of each 32 bit memory model. */
182#define MEMWRDSIZE (sizeof (struct mem_wrd))
183
184extern struct mem_segs memory[];
185extern struct PROCESSOR m78000;
186
187struct PROCESSOR
188{
189 unsigned WORD
190 /* Execute instruction pointer. */
191 ip,
192 /* Vector base register. */
193 vbr,
194 /* Processor status register. */
195 psr;
196
197 /* Source 1. */
198 WORD S1bus,
199 /* Source 2. */
200 S2bus,
201 /* Destination. */
202 Dbus,
203 /* Data address bus. */
204 DAbus,
205 ALU,
206 /* Data registers. */
207 Regs[REGs],
208 /* Max clocks before reg is available. */
209 time_left[REGs],
210 /* Writeback priority of reg. */
211 wb_pri[REGs],
212 /* Integer unit control regs. */
213 SFU0_regs[REGs],
214 /* Floating point control regs. */
215 SFU1_regs[REGs],
216 Scoreboard[REGs],
217 Vbr;
218 unsigned WORD scoreboard,
219 Psw,
220 Tpsw;
221 /* Waiting for a jump instruction. */
222 FLAG jump_pending:1;
223};
224
225/* Size of immediate field. */
226
227#define i26bit 1
228#define i16bit 2
229#define i10bit 3
230
231/* Definitions for fields in psr. */
232
233#define mode 31
234#define rbo 30
235#define ser 29
236#define carry 28
237#define sf7m 11
238#define sf6m 10
239#define sf5m 9
240#define sf4m 8
241#define sf3m 7
242#define sf2m 6
243#define sf1m 5
244#define mam 4
245#define inm 3
246#define exm 2
247#define trm 1
248#define ovfm 0
249
250/* The 1 clock operations. */
251
252#define ADDU 1
253#define ADDC 2
254#define ADDUC 3
255#define ADD 4
256
257#define SUBU ADD+1
258#define SUBB ADD+2
259#define SUBUB ADD+3
260#define SUB ADD+4
261
262#define AND_ ADD+5
263#define OR ADD+6
264#define XOR ADD+7
265#define CMP ADD+8
266
267/* Loads. */
268
269#define LDAB CMP+1
270#define LDAH CMP+2
271#define LDA CMP+3
272#define LDAD CMP+4
273
274#define LDB LDAD+1
275#define LDH LDAD+2
276#define LD LDAD+3
277#define LDD LDAD+4
278#define LDBU LDAD+5
279#define LDHU LDAD+6
280
281/* Stores. */
282
283#define STB LDHU+1
284#define STH LDHU+2
285#define ST LDHU+3
286#define STD LDHU+4
287
288/* Exchange. */
289
290#define XMEMBU LDHU+5
291#define XMEM LDHU+6
292
293/* Branches. */
294
295#define JSR STD+1
296#define BSR STD+2
297#define BR STD+3
298#define JMP STD+4
299#define BB1 STD+5
300#define BB0 STD+6
301#define RTN STD+7
302#define BCND STD+8
303
304/* Traps. */
305
306#define TB1 BCND+1
307#define TB0 BCND+2
308#define TCND BCND+3
309#define RTE BCND+4
310#define TBND BCND+5
311
312/* Misc. */
313
314#define MUL TBND + 1
315#define DIV MUL +2
316#define DIVU MUL +3
317#define MASK MUL +4
318#define FF0 MUL +5
319#define FF1 MUL +6
320#define CLR MUL +7
321#define SET MUL +8
322#define EXT MUL +9
323#define EXTU MUL +10
324#define MAK MUL +11
325#define ROT MUL +12
326
327/* Control register manipulations. */
328
329#define LDCR ROT +1
330#define STCR ROT +2
331#define XCR ROT +3
332
333#define FLDCR ROT +4
334#define FSTCR ROT +5
335#define FXCR ROT +6
336
337#define NOP XCR +1
338
339/* Floating point instructions. */
340
341#define FADD NOP +1
342#define FSUB NOP +2
343#define FMUL NOP +3
344#define FDIV NOP +4
345#define FSQRT NOP +5
346#define FCMP NOP +6
347#define FIP NOP +7
348#define FLT NOP +8
349#define INT NOP +9
350#define NINT NOP +10
351#define TRNC NOP +11
352#define FLDC NOP +12
353#define FSTC NOP +13
354#define FXC NOP +14
355
356#define UEXT(src,off,wid) \
357 ((((unsigned int)(src)) >> (off)) & ((1 << (wid)) - 1))
358
359#define SEXT(src,off,wid) \
360 (((((int)(src))<<(32 - ((off) + (wid)))) >>(32 - (wid))) )
361
362#define MAKE(src,off,wid) \
363 ((((unsigned int)(src)) & ((1 << (wid)) - 1)) << (off))
364
365#define opword(n) (unsigned long) (memaddr->mem.l)
366
367/* Constants and masks. */
368
369#define SFU0 0x80000000
370#define SFU1 0x84000000
371#define SFU7 0x9c000000
372#define RRI10 0xf0000000
373#define RRR 0xf4000000
374#define SFUMASK 0xfc00ffe0
375#define RRRMASK 0xfc00ffe0
376#define RRI10MASK 0xfc00fc00
377#define DEFMASK 0xfc000000
378#define CTRL 0x0000f000
379#define CTRLMASK 0xfc00f800
380
381/* Operands types. */
382
383enum operand_type
384{
385 HEX = 1,
386 REG = 2,
387 CONT = 3,
388 IND = 3,
389 BF = 4,
390 /* Scaled register. */
391 REGSC = 5,
392 /* Control register. */
393 CRREG = 6,
394 /* Floating point control register. */
395 FCRREG = 7,
396 PCREL = 8,
397 CONDMASK = 9,
398 /* Extended register. */
399 XREG = 10,
400 /* Decimal. */
401 DEC = 11
402};
403
404/* Hashing specification. */
405
406#define HASHVAL 79
407
408/* Structure templates. */
409
410typedef struct
411{
412 unsigned int offset;
413 unsigned int width;
414 enum operand_type type;
415} OPSPEC;
416
417struct SIM_FLAGS
418{
419 int ltncy, /* latency (max number of clocks needed to execute). */
420 extime, /* execution time (min number of clocks needed to execute). */
421 wb_pri; /* writeback slot priority. */
422 unsigned op:OP, /* simulator version of opcode. */
423 imm_flags:2, /* 10,16 or 26 bit immediate flags. */
424 rs1_used:1, /* register source 1 used. */
425 rs2_used:1, /* register source 2 used. */
426 rsd_used:1, /* register source/dest used. */
427 c_flag:1, /* complement. */
428 u_flag:1, /* upper half word. */
429 n_flag:1, /* execute next. */
430 wb_flag:1, /* uses writeback slot. */
431 dest_64:1, /* double precision dest. */
432 s1_64:1, /* double precision source 1. */
433 s2_64:1, /* double precision source 2. */
434 scale_flag:1; /* register is scaled. */
435};
436
437typedef struct INSTRUCTAB {
438 unsigned int opcode;
439 char *mnemonic;
440 OPSPEC op1,op2,op3;
441 struct SIM_FLAGS flgs;
442} INSTAB;
443
444
445
446#define NO_OPERAND {0,0,0}
447
448extern const INSTAB instructions[];
449
450/*
451 * Local Variables:
452 * fill-column: 131
453 * End:
454 */
Note: See TracBrowser for help on using the repository browser.