| 1 | /* m68hc11.h -- Header file for Motorola 68HC11 & 68HC12 opcode table
|
|---|
| 2 | Copyright 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
|
|---|
| 3 | Written by Stephane Carrez (stcarrez@nerim.fr)
|
|---|
| 4 |
|
|---|
| 5 | This file is part of GDB, GAS, and the GNU binutils.
|
|---|
| 6 |
|
|---|
| 7 | GDB, GAS, and the GNU binutils are free software; you can redistribute
|
|---|
| 8 | them and/or modify them under the terms of the GNU General Public
|
|---|
| 9 | License as published by the Free Software Foundation; either version
|
|---|
| 10 | 1, or (at your option) any later version.
|
|---|
| 11 |
|
|---|
| 12 | GDB, GAS, and the GNU binutils are distributed in the hope that they
|
|---|
| 13 | will be useful, but WITHOUT ANY WARRANTY; without even the implied
|
|---|
| 14 | warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
|
|---|
| 15 | the GNU General Public License for more details.
|
|---|
| 16 |
|
|---|
| 17 | You should have received a copy of the GNU General Public License
|
|---|
| 18 | along with this file; see the file COPYING. If not, write to the Free
|
|---|
| 19 | Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
|
|---|
| 20 |
|
|---|
| 21 | #ifndef _OPCODE_M68HC11_H
|
|---|
| 22 | #define _OPCODE_M68HC11_H
|
|---|
| 23 |
|
|---|
| 24 | /* Flags for the definition of the 68HC11 & 68HC12 CCR. */
|
|---|
| 25 | #define M6811_S_BIT 0x80 /* Stop disable */
|
|---|
| 26 | #define M6811_X_BIT 0x40 /* X-interrupt mask */
|
|---|
| 27 | #define M6811_H_BIT 0x20 /* Half carry flag */
|
|---|
| 28 | #define M6811_I_BIT 0x10 /* I-interrupt mask */
|
|---|
| 29 | #define M6811_N_BIT 0x08 /* Negative */
|
|---|
| 30 | #define M6811_Z_BIT 0x04 /* Zero */
|
|---|
| 31 | #define M6811_V_BIT 0x02 /* Overflow */
|
|---|
| 32 | #define M6811_C_BIT 0x01 /* Carry */
|
|---|
| 33 |
|
|---|
| 34 | /* 68HC11 register address offsets (range 0..0x3F or 0..64).
|
|---|
| 35 | The absolute address of the I/O register depends on the setting
|
|---|
| 36 | of the M6811_INIT register. At init time, the I/O registers are
|
|---|
| 37 | mapped at 0x1000. Address of registers is then:
|
|---|
| 38 |
|
|---|
| 39 | 0x1000 + M6811_xxx
|
|---|
| 40 | */
|
|---|
| 41 | #define M6811_PORTA 0x00 /* Port A register */
|
|---|
| 42 | #define M6811__RES1 0x01 /* Unused/Reserved */
|
|---|
| 43 | #define M6811_PIOC 0x02 /* Parallel I/O Control register */
|
|---|
| 44 | #define M6811_PORTC 0x03 /* Port C register */
|
|---|
| 45 | #define M6811_PORTB 0x04 /* Port B register */
|
|---|
| 46 | #define M6811_PORTCL 0x05 /* Alternate latched port C */
|
|---|
| 47 | #define M6811__RES6 0x06 /* Unused/Reserved */
|
|---|
| 48 | #define M6811_DDRC 0x07 /* Data direction register for port C */
|
|---|
| 49 | #define M6811_PORTD 0x08 /* Port D register */
|
|---|
| 50 | #define M6811_DDRD 0x09 /* Data direction register for port D */
|
|---|
| 51 | #define M6811_PORTE 0x0A /* Port E input register */
|
|---|
| 52 | #define M6811_CFORC 0x0B /* Compare Force Register */
|
|---|
| 53 | #define M6811_OC1M 0x0C /* OC1 Action Mask register */
|
|---|
| 54 | #define M6811_OC1D 0x0D /* OC1 Action Data register */
|
|---|
| 55 | #define M6811_TCTN 0x0E /* Timer Counter Register */
|
|---|
| 56 | #define M6811_TCTN_H 0x0E /* " " " High part */
|
|---|
| 57 | #define M6811_TCTN_L 0x0F /* " " " Low part */
|
|---|
| 58 | #define M6811_TIC1 0x10 /* Input capture 1 register */
|
|---|
| 59 | #define M6811_TIC1_H 0x10 /* " " " High part */
|
|---|
| 60 | #define M6811_TIC1_L 0x11 /* " " " Low part */
|
|---|
| 61 | #define M6811_TIC2 0x12 /* Input capture 2 register */
|
|---|
| 62 | #define M6811_TIC2_H 0x12 /* " " " High part */
|
|---|
| 63 | #define M6811_TIC2_L 0x13 /* " " " Low part */
|
|---|
| 64 | #define M6811_TIC3 0x14 /* Input capture 3 register */
|
|---|
| 65 | #define M6811_TIC3_H 0x14 /* " " " High part */
|
|---|
| 66 | #define M6811_TIC3_L 0x15 /* " " " Low part */
|
|---|
| 67 | #define M6811_TOC1 0x16 /* Output Compare 1 register */
|
|---|
| 68 | #define M6811_TOC1_H 0x16 /* " " " High part */
|
|---|
| 69 | #define M6811_TOC1_L 0x17 /* " " " Low part */
|
|---|
| 70 | #define M6811_TOC2 0x18 /* Output Compare 2 register */
|
|---|
| 71 | #define M6811_TOC2_H 0x18 /* " " " High part */
|
|---|
| 72 | #define M6811_TOC2_L 0x19 /* " " " Low part */
|
|---|
| 73 | #define M6811_TOC3 0x1A /* Output Compare 3 register */
|
|---|
| 74 | #define M6811_TOC3_H 0x1A /* " " " High part */
|
|---|
| 75 | #define M6811_TOC3_L 0x1B /* " " " Low part */
|
|---|
| 76 | #define M6811_TOC4 0x1C /* Output Compare 4 register */
|
|---|
| 77 | #define M6811_TOC4_H 0x1C /* " " " High part */
|
|---|
| 78 | #define M6811_TOC4_L 0x1D /* " " " Low part */
|
|---|
| 79 | #define M6811_TOC5 0x1E /* Output Compare 5 register */
|
|---|
| 80 | #define M6811_TOC5_H 0x1E /* " " " High part */
|
|---|
| 81 | #define M6811_TOC5_L 0x1F /* " " " Low part */
|
|---|
| 82 | #define M6811_TCTL1 0x20 /* Timer Control register 1 */
|
|---|
| 83 | #define M6811_TCTL2 0x21 /* Timer Control register 2 */
|
|---|
| 84 | #define M6811_TMSK1 0x22 /* Timer Interrupt Mask Register 1 */
|
|---|
| 85 | #define M6811_TFLG1 0x23 /* Timer Interrupt Flag Register 1 */
|
|---|
| 86 | #define M6811_TMSK2 0x24 /* Timer Interrupt Mask Register 2 */
|
|---|
| 87 | #define M6811_TFLG2 0x25 /* Timer Interrupt Flag Register 2 */
|
|---|
| 88 | #define M6811_PACTL 0x26 /* Pulse Accumulator Control Register */
|
|---|
| 89 | #define M6811_PACNT 0x27 /* Pulse Accumulator Count Register */
|
|---|
| 90 | #define M6811_SPCR 0x28 /* SPI Control register */
|
|---|
| 91 | #define M6811_SPSR 0x29 /* SPI Status register */
|
|---|
| 92 | #define M6811_SPDR 0x2A /* SPI Data register */
|
|---|
| 93 | #define M6811_BAUD 0x2B /* SCI Baud register */
|
|---|
| 94 | #define M6811_SCCR1 0x2C /* SCI Control register 1 */
|
|---|
| 95 | #define M6811_SCCR2 0x2D /* SCI Control register 2 */
|
|---|
| 96 | #define M6811_SCSR 0x2E /* SCI Status register */
|
|---|
| 97 | #define M6811_SCDR 0x2F /* SCI Data (Read => RDR, Write => TDR) */
|
|---|
| 98 | #define M6811_ADCTL 0x30 /* A/D Control register */
|
|---|
| 99 | #define M6811_ADR1 0x31 /* A/D, Analog Result register 1 */
|
|---|
| 100 | #define M6811_ADR2 0x32 /* A/D, Analog Result register 2 */
|
|---|
| 101 | #define M6811_ADR3 0x33 /* A/D, Analog Result register 3 */
|
|---|
| 102 | #define M6811_ADR4 0x34 /* A/D, Analog Result register 4 */
|
|---|
| 103 | #define M6811__RES35 0x35
|
|---|
| 104 | #define M6811__RES36 0x36
|
|---|
| 105 | #define M6811__RES37 0x37
|
|---|
| 106 | #define M6811__RES38 0x38
|
|---|
| 107 | #define M6811_OPTION 0x39 /* System Configuration Options */
|
|---|
| 108 | #define M6811_COPRST 0x3A /* Arm/Reset COP Timer Circuitry */
|
|---|
| 109 | #define M6811_PPROG 0x3B /* EEPROM Programming Control Register */
|
|---|
| 110 | #define M6811_HPRIO 0x3C /* Highest priority I-Bit int and misc */
|
|---|
| 111 | #define M6811_INIT 0x3D /* Ram and I/O mapping register */
|
|---|
| 112 | #define M6811_TEST1 0x3E /* Factory test control register */
|
|---|
| 113 | #define M6811_CONFIG 0x3F /* COP, ROM and EEPROM enables */
|
|---|
| 114 |
|
|---|
| 115 |
|
|---|
| 116 | /* Flags of the CONFIG register (in EEPROM). */
|
|---|
| 117 | #define M6811_NOSEC 0x08 /* Security mode disable */
|
|---|
| 118 | #define M6811_NOCOP 0x04 /* COP system disable */
|
|---|
| 119 | #define M6811_ROMON 0x02 /* Enable on-chip rom */
|
|---|
| 120 | #define M6811_EEON 0x01 /* Enable on-chip eeprom */
|
|---|
| 121 |
|
|---|
| 122 | /* Flags of the PPROG register. */
|
|---|
| 123 | #define M6811_BYTE 0x10 /* Byte mode */
|
|---|
| 124 | #define M6811_ROW 0x08 /* Row mode */
|
|---|
| 125 | #define M6811_ERASE 0x04 /* Erase mode select (1 = erase, 0 = read) */
|
|---|
| 126 | #define M6811_EELAT 0x02 /* EEPROM Latch Control */
|
|---|
| 127 | #define M6811_EEPGM 0x01 /* EEPROM Programming Voltage Enable */
|
|---|
| 128 |
|
|---|
| 129 | /* Flags of the PIOC register. */
|
|---|
| 130 | #define M6811_STAF 0x80 /* Strobe A Interrupt Status Flag */
|
|---|
| 131 | #define M6811_STAI 0x40 /* Strobe A Interrupt Enable Mask */
|
|---|
| 132 | #define M6811_CWOM 0x20 /* Port C Wire OR mode */
|
|---|
| 133 | #define M6811_HNDS 0x10 /* Handshake mode */
|
|---|
| 134 | #define M6811_OIN 0x08 /* Output or Input handshaking */
|
|---|
| 135 | #define M6811_PLS 0x04 /* Pulse/Interlocked Handshake Operation */
|
|---|
| 136 | #define M6811_EGA 0x02 /* Active Edge for Strobe A */
|
|---|
| 137 | #define M6811_INVB 0x01 /* Invert Strobe B */
|
|---|
| 138 |
|
|---|
| 139 | /* Flags of the SCCR1 register. */
|
|---|
| 140 | #define M6811_R8 0x80 /* Receive Data bit 8 */
|
|---|
| 141 | #define M6811_T8 0x40 /* Transmit data bit 8 */
|
|---|
| 142 | #define M6811__SCCR1_5 0x20 /* Unused */
|
|---|
| 143 | #define M6811_M 0x10 /* SCI Character length */
|
|---|
| 144 | #define M6811_WAKE 0x08 /* Wake up method select (0=idle, 1=addr mark) */
|
|---|
| 145 |
|
|---|
| 146 | /* Flags of the SCCR2 register. */
|
|---|
| 147 | #define M6811_TIE 0x80 /* Transmit Interrupt enable */
|
|---|
| 148 | #define M6811_TCIE 0x40 /* Transmit Complete Interrupt Enable */
|
|---|
| 149 | #define M6811_RIE 0x20 /* Receive Interrupt Enable */
|
|---|
| 150 | #define M6811_ILIE 0x10 /* Idle Line Interrupt Enable */
|
|---|
| 151 | #define M6811_TE 0x08 /* Transmit Enable */
|
|---|
| 152 | #define M6811_RE 0x04 /* Receive Enable */
|
|---|
| 153 | #define M6811_RWU 0x02 /* Receiver Wake Up */
|
|---|
| 154 | #define M6811_SBK 0x01 /* Send Break */
|
|---|
| 155 |
|
|---|
| 156 | /* Flags of the SCSR register. */
|
|---|
| 157 | #define M6811_TDRE 0x80 /* Transmit Data Register Empty */
|
|---|
| 158 | #define M6811_TC 0x40 /* Transmit Complete */
|
|---|
| 159 | #define M6811_RDRF 0x20 /* Receive Data Register Full */
|
|---|
| 160 | #define M6811_IDLE 0x10 /* Idle Line Detect */
|
|---|
| 161 | #define M6811_OR 0x08 /* Overrun Error */
|
|---|
| 162 | #define M6811_NF 0x04 /* Noise Flag */
|
|---|
| 163 | #define M6811_FE 0x02 /* Framing Error */
|
|---|
| 164 | #define M6811__SCSR_0 0x01 /* Unused */
|
|---|
| 165 |
|
|---|
| 166 | /* Flags of the BAUD register. */
|
|---|
| 167 | #define M6811_TCLR 0x80 /* Clear Baud Rate (TEST mode) */
|
|---|
| 168 | #define M6811__BAUD_6 0x40 /* Not used */
|
|---|
| 169 | #define M6811_SCP1 0x20 /* SCI Baud rate prescaler select */
|
|---|
| 170 | #define M6811_SCP0 0x10
|
|---|
| 171 | #define M6811_RCKB 0x08 /* Baud Rate Clock Check (TEST mode) */
|
|---|
| 172 | #define M6811_SCR2 0x04 /* SCI Baud rate select */
|
|---|
| 173 | #define M6811_SCR1 0x02
|
|---|
| 174 | #define M6811_SCR0 0x01
|
|---|
| 175 |
|
|---|
| 176 | #define M6811_BAUD_DIV_1 (0)
|
|---|
| 177 | #define M6811_BAUD_DIV_3 (M6811_SCP0)
|
|---|
| 178 | #define M6811_BAUD_DIV_4 (M6811_SCP1)
|
|---|
| 179 | #define M6811_BAUD_DIV_13 (M6811_SCP1|M6811_SCP0)
|
|---|
| 180 |
|
|---|
| 181 | /* Flags of the SPCR register. */
|
|---|
| 182 | #define M6811_SPIE 0x80 /* Serial Peripheral Interrupt Enable */
|
|---|
| 183 | #define M6811_SPE 0x40 /* Serial Peripheral System Enable */
|
|---|
| 184 | #define M6811_DWOM 0x20 /* Port D Wire-OR mode option */
|
|---|
| 185 | #define M6811_MSTR 0x10 /* Master Mode Select */
|
|---|
| 186 | #define M6811_CPOL 0x08 /* Clock Polarity */
|
|---|
| 187 | #define M6811_CPHA 0x04 /* Clock Phase */
|
|---|
| 188 | #define M6811_SPR1 0x02 /* SPI Clock Rate Select */
|
|---|
| 189 | #define M6811_SPR0 0x01
|
|---|
| 190 |
|
|---|
| 191 | /* Flags of the SPSR register. */
|
|---|
| 192 | #define M6811_SPIF 0x80 /* SPI Transfer Complete flag */
|
|---|
| 193 | #define M6811_WCOL 0x40 /* Write Collision */
|
|---|
| 194 | #define M6811_MODF 0x10 /* Mode Fault */
|
|---|
| 195 |
|
|---|
| 196 | /* Flags of the ADCTL register. */
|
|---|
| 197 | #define M6811_CCF 0x80 /* Conversions Complete Flag */
|
|---|
| 198 | #define M6811_SCAN 0x20 /* Continuous Scan Control */
|
|---|
| 199 | #define M6811_MULT 0x10 /* Multiple Channel/Single Channel Control */
|
|---|
| 200 | #define M6811_CD 0x08 /* Channel Select D */
|
|---|
| 201 | #define M6811_CC 0x04 /* C */
|
|---|
| 202 | #define M6811_CB 0x02 /* B */
|
|---|
| 203 | #define M6811_CA 0x01 /* A */
|
|---|
| 204 |
|
|---|
| 205 | /* Flags of the CFORC register. */
|
|---|
| 206 | #define M6811_FOC1 0x80 /* Force Output Compare 1 */
|
|---|
| 207 | #define M6811_FOC2 0x40 /* 2 */
|
|---|
| 208 | #define M6811_FOC3 0x20 /* 3 */
|
|---|
| 209 | #define M6811_FOC4 0x10 /* 4 */
|
|---|
| 210 | #define M6811_FOC5 0x08 /* 5 */
|
|---|
| 211 |
|
|---|
| 212 | /* Flags of the OC1M register. */
|
|---|
| 213 | #define M6811_OC1M7 0x80 /* Output Compare 7 */
|
|---|
| 214 | #define M6811_OC1M6 0x40 /* 6 */
|
|---|
| 215 | #define M6811_OC1M5 0x20 /* 5 */
|
|---|
| 216 | #define M6811_OC1M4 0x10 /* 4 */
|
|---|
| 217 | #define M6811_OC1M3 0x08 /* 3 */
|
|---|
| 218 |
|
|---|
| 219 | /* Flags of the OC1D register. */
|
|---|
| 220 | #define M6811_OC1D7 0x80
|
|---|
| 221 | #define M6811_OC1D6 0x40
|
|---|
| 222 | #define M6811_OC1D5 0x20
|
|---|
| 223 | #define M6811_OC1D4 0x10
|
|---|
| 224 | #define M6811_OC1D3 0x08
|
|---|
| 225 |
|
|---|
| 226 | /* Flags of the TCTL1 register. */
|
|---|
| 227 | #define M6811_OM2 0x80 /* Output Mode 2 */
|
|---|
| 228 | #define M6811_OL2 0x40 /* Output Level 2 */
|
|---|
| 229 | #define M6811_OM3 0x20
|
|---|
| 230 | #define M6811_OL3 0x10
|
|---|
| 231 | #define M6811_OM4 0x08
|
|---|
| 232 | #define M6811_OL4 0x04
|
|---|
| 233 | #define M6811_OM5 0x02
|
|---|
| 234 | #define M6811_OL5 0x01
|
|---|
| 235 |
|
|---|
| 236 | /* Flags of the TCTL2 register. */
|
|---|
| 237 | #define M6811_EDG1B 0x20 /* Input Edge Capture Control 1 */
|
|---|
| 238 | #define M6811_EDG1A 0x10
|
|---|
| 239 | #define M6811_EDG2B 0x08 /* Input 2 */
|
|---|
| 240 | #define M6811_EDG2A 0x04
|
|---|
| 241 | #define M6811_EDG3B 0x02 /* Input 3 */
|
|---|
| 242 | #define M6811_EDG3A 0x01
|
|---|
| 243 |
|
|---|
| 244 | /* Flags of the TMSK1 register. */
|
|---|
| 245 | #define M6811_OC1I 0x80 /* Output Compare 1 Interrupt */
|
|---|
| 246 | #define M6811_OC2I 0x40 /* 2 */
|
|---|
| 247 | #define M6811_OC3I 0x20 /* 3 */
|
|---|
| 248 | #define M6811_OC4I 0x10 /* 4 */
|
|---|
| 249 | #define M6811_OC5I 0x08 /* 5 */
|
|---|
| 250 | #define M6811_IC1I 0x04 /* Input Capture 1 Interrupt */
|
|---|
| 251 | #define M6811_IC2I 0x02 /* 2 */
|
|---|
| 252 | #define M6811_IC3I 0x01 /* 3 */
|
|---|
| 253 |
|
|---|
| 254 | /* Flags of the TFLG1 register. */
|
|---|
| 255 | #define M6811_OC1F 0x80 /* Output Compare 1 Flag */
|
|---|
| 256 | #define M6811_OC2F 0x40 /* 2 */
|
|---|
| 257 | #define M6811_OC3F 0x20 /* 3 */
|
|---|
| 258 | #define M6811_OC4F 0x10 /* 4 */
|
|---|
| 259 | #define M6811_OC5F 0x08 /* 5 */
|
|---|
| 260 | #define M6811_IC1F 0x04 /* Input Capture 1 Flag */
|
|---|
| 261 | #define M6811_IC2F 0x02 /* 2 */
|
|---|
| 262 | #define M6811_IC3F 0x01 /* 3 */
|
|---|
| 263 |
|
|---|
| 264 | /* Flags of Timer Interrupt Mask Register 2 (TMSK2). */
|
|---|
| 265 | #define M6811_TOI 0x80 /* Timer Overflow Interrupt Enable */
|
|---|
| 266 | #define M6811_RTII 0x40 /* RTI Interrupt Enable */
|
|---|
| 267 | #define M6811_PAOVI 0x20 /* Pulse Accumulator Overflow Interrupt En. */
|
|---|
| 268 | #define M6811_PAII 0x10 /* Pulse Accumulator Interrupt Enable */
|
|---|
| 269 | #define M6811_PR1 0x02 /* Timer prescaler */
|
|---|
| 270 | #define M6811_PR0 0x01 /* Timer prescaler */
|
|---|
| 271 | #define M6811_TPR_1 0x00 /* " " prescale div 1 */
|
|---|
| 272 | #define M6811_TPR_4 0x01 /* " " prescale div 4 */
|
|---|
| 273 | #define M6811_TPR_8 0x02 /* " " prescale div 8 */
|
|---|
| 274 | #define M6811_TPR_16 0x03 /* " " prescale div 16 */
|
|---|
| 275 |
|
|---|
| 276 | /* Flags of Timer Interrupt Flag Register 2 (M6811_TFLG2). */
|
|---|
| 277 | #define M6811_TOF 0x80 /* Timer overflow bit */
|
|---|
| 278 | #define M6811_RTIF 0x40 /* Read time interrupt flag */
|
|---|
| 279 | #define M6811_PAOVF 0x20 /* Pulse accumulator overflow Interrupt flag */
|
|---|
| 280 | #define M6811_PAIF 0x10 /* Pulse accumulator Input Edge " " " */
|
|---|
| 281 |
|
|---|
| 282 | /* Flags of Pulse Accumulator Control Register (PACTL). */
|
|---|
| 283 | #define M6811_DDRA7 0x80 /* Data direction for port A bit 7 */
|
|---|
| 284 | #define M6811_PAEN 0x40 /* Pulse accumulator system enable */
|
|---|
| 285 | #define M6811_PAMOD 0x20 /* Pulse accumulator mode */
|
|---|
| 286 | #define M6811_PEDGE 0x10 /* Pulse accumulator edge control */
|
|---|
| 287 | #define M6811_RTR1 0x02 /* RTI Interrupt rates select */
|
|---|
| 288 | #define M6811_RTR0 0x01 /* " " " " */
|
|---|
| 289 |
|
|---|
| 290 | /* Flags of the Options register. */
|
|---|
| 291 | #define M6811_ADPU 0x80 /* A/D Powerup */
|
|---|
| 292 | #define M6811_CSEL 0x40 /* A/D/EE Charge pump clock source select */
|
|---|
| 293 | #define M6811_IRQE 0x20 /* IRQ Edge/Level sensitive */
|
|---|
| 294 | #define M6811_DLY 0x10 /* Stop exit turn on delay */
|
|---|
| 295 | #define M6811_CME 0x08 /* Clock Monitor enable */
|
|---|
| 296 | #define M6811_CR1 0x02 /* COP timer rate select */
|
|---|
| 297 | #define M6811_CR0 0x01 /* COP timer rate select */
|
|---|
| 298 |
|
|---|
| 299 | /* Flags of the HPRIO register. */
|
|---|
| 300 | #define M6811_RBOOT 0x80 /* Read Bootstrap ROM */
|
|---|
| 301 | #define M6811_SMOD 0x40 /* Special Mode */
|
|---|
| 302 | #define M6811_MDA 0x20 /* Mode Select A */
|
|---|
| 303 | #define M6811_IRV 0x10 /* Internal Read Visibility */
|
|---|
| 304 | #define M6811_PSEL3 0x08 /* Priority Select */
|
|---|
| 305 | #define M6811_PSEL2 0x04
|
|---|
| 306 | #define M6811_PSEL1 0x02
|
|---|
| 307 | #define M6811_PSEL0 0x01
|
|---|
| 308 |
|
|---|
| 309 | /* Some insns used by gas to turn relative branches into absolute ones. */
|
|---|
| 310 | #define M6811_BRA 0x20
|
|---|
| 311 | #define M6811_JMP 0x7e
|
|---|
| 312 | #define M6811_BSR 0x8d
|
|---|
| 313 | #define M6811_JSR 0xbd
|
|---|
| 314 | #define M6812_JMP 0x06
|
|---|
| 315 | #define M6812_BSR 0x07
|
|---|
| 316 | #define M6812_JSR 0x16
|
|---|
| 317 |
|
|---|
| 318 | /* Instruction code pages. Code page 1 is the default. */
|
|---|
| 319 | /*#define M6811_OPCODE_PAGE1 0x00*/
|
|---|
| 320 | #define M6811_OPCODE_PAGE2 0x18
|
|---|
| 321 | #define M6811_OPCODE_PAGE3 0x1A
|
|---|
| 322 | #define M6811_OPCODE_PAGE4 0xCD
|
|---|
| 323 |
|
|---|
| 324 |
|
|---|
| 325 | /* 68HC11 operands formats as stored in the m6811_opcode table. These
|
|---|
| 326 | flags do not correspond to anything in the 68HC11 or 68HC12.
|
|---|
| 327 | They are only used by GAS to recognize operands. */
|
|---|
| 328 | #define M6811_OP_NONE 0 /* No operand */
|
|---|
| 329 | #define M6811_OP_DIRECT 0x0001 /* Page 0 addressing: *<val-8bits> */
|
|---|
| 330 | #define M6811_OP_IMM8 0x0002 /* 8 bits immediat: #<val-8bits> */
|
|---|
| 331 | #define M6811_OP_IMM16 0x0004 /* 16 bits immediat: #<val-16bits> */
|
|---|
| 332 | #define M6811_OP_IND16 0x0008 /* Indirect abs: <val-16> */
|
|---|
| 333 | #define M6812_OP_IND16_P2 0x0010 /* Second parameter indirect abs. */
|
|---|
| 334 | #define M6812_OP_REG 0x0020 /* Register operand 1 */
|
|---|
| 335 | #define M6812_OP_REG_2 0x0040 /* Register operand 2 */
|
|---|
| 336 |
|
|---|
| 337 | #define M6811_OP_IX 0x0080 /* Indirect IX: <val-8>,x */
|
|---|
| 338 | #define M6811_OP_IY 0x0100 /* Indirect IY: <val-8>,y */
|
|---|
| 339 | #define M6812_OP_IDX 0x0200 /* Indirect: N,r N,[+-]r[+-] N:5-bits */
|
|---|
| 340 | #define M6812_OP_IDX_1 0x0400 /* N,r N:9-bits */
|
|---|
| 341 | #define M6812_OP_IDX_2 0x0800 /* N,r N:16-bits */
|
|---|
| 342 | #define M6812_OP_D_IDX 0x1000 /* Indirect indexed: [D,r] */
|
|---|
| 343 | #define M6812_OP_D_IDX_2 0x2000 /* [N,r] N:16-bits */
|
|---|
| 344 | #define M6812_OP_PAGE 0x4000 /* Page number */
|
|---|
| 345 | #define M6811_OP_MASK 0x07FFF
|
|---|
| 346 | #define M6811_OP_BRANCH 0x00008000 /* Branch, jsr, call */
|
|---|
| 347 | #define M6811_OP_BITMASK 0x00010000 /* Bitmask: #<val-8> */
|
|---|
| 348 | #define M6811_OP_JUMP_REL 0x00020000 /* Pc-Relative: <val-8> */
|
|---|
| 349 | #define M6812_OP_JUMP_REL16 0x00040000 /* Pc-relative: <val-16> */
|
|---|
| 350 | #define M6811_OP_PAGE1 0x0000
|
|---|
| 351 | #define M6811_OP_PAGE2 0x00080000 /* Need a page2 opcode before */
|
|---|
| 352 | #define M6811_OP_PAGE3 0x00100000 /* Need a page3 opcode before */
|
|---|
| 353 | #define M6811_OP_PAGE4 0x00200000 /* Need a page4 opcode before */
|
|---|
| 354 | #define M6811_MAX_OPERANDS 3 /* Max operands: brset <dst> <mask> <b> */
|
|---|
| 355 |
|
|---|
| 356 | #define M6812_ACC_OFFSET 0x00400000 /* A,r B,r D,r */
|
|---|
| 357 | #define M6812_ACC_IND 0x00800000 /* [D,r] */
|
|---|
| 358 | #define M6812_PRE_INC 0x01000000 /* n,+r n = -8..8 */
|
|---|
| 359 | #define M6812_PRE_DEC 0x02000000 /* n,-r */
|
|---|
| 360 | #define M6812_POST_INC 0x04000000 /* n,r+ */
|
|---|
| 361 | #define M6812_POST_DEC 0x08000000 /* n,r- */
|
|---|
| 362 | #define M6812_INDEXED_IND 0x10000000 /* [n,r] n = 16-bits */
|
|---|
| 363 | #define M6812_INDEXED 0x20000000 /* n,r n = 5, 9 or 16-bits */
|
|---|
| 364 | #define M6812_OP_IDX_P2 0x40000000
|
|---|
| 365 |
|
|---|
| 366 | /* Markers to identify some instructions. */
|
|---|
| 367 | #define M6812_OP_EXG_MARKER 0x01000000 /* exg r1,r2 */
|
|---|
| 368 | #define M6812_OP_TFR_MARKER 0x02000000 /* tfr r1,r2 */
|
|---|
| 369 | #define M6812_OP_SEX_MARKER 0x04000000 /* sex r1,r2 */
|
|---|
| 370 |
|
|---|
| 371 | #define M6812_OP_EQ_MARKER 0x80000000 /* dbeq/ibeq/tbeq */
|
|---|
| 372 | #define M6812_OP_DBCC_MARKER 0x04000000 /* dbeq/dbne */
|
|---|
| 373 | #define M6812_OP_IBCC_MARKER 0x02000000 /* ibeq/ibne */
|
|---|
| 374 | #define M6812_OP_TBCC_MARKER 0x01000000
|
|---|
| 375 |
|
|---|
| 376 | #define M6812_OP_TRAP_ID 0x80000000 /* trap #N */
|
|---|
| 377 |
|
|---|
| 378 | #define M6811_OP_HIGH_ADDR 0x01000000 /* Used internally by gas. */
|
|---|
| 379 | #define M6811_OP_LOW_ADDR 0x02000000
|
|---|
| 380 |
|
|---|
| 381 | #define M68HC12_BANK_VIRT 0x010000
|
|---|
| 382 | #define M68HC12_BANK_MASK 0x00003fff
|
|---|
| 383 | #define M68HC12_BANK_BASE 0x00008000
|
|---|
| 384 | #define M68HC12_BANK_SHIFT 14
|
|---|
| 385 | #define M68HC12_BANK_PAGE_MASK 0x0ff
|
|---|
| 386 |
|
|---|
| 387 |
|
|---|
| 388 | /* CPU identification. */
|
|---|
| 389 | #define cpu6811 0x01
|
|---|
| 390 | #define cpu6812 0x02
|
|---|
| 391 | #define cpu6812s 0x04
|
|---|
| 392 |
|
|---|
| 393 | /* The opcode table is an array of struct m68hc11_opcode. */
|
|---|
| 394 | struct m68hc11_opcode {
|
|---|
| 395 | const char* name; /* Op-code name */
|
|---|
| 396 | long format;
|
|---|
| 397 | unsigned char size;
|
|---|
| 398 | unsigned char opcode;
|
|---|
| 399 | unsigned char cycles_low;
|
|---|
| 400 | unsigned char cycles_high;
|
|---|
| 401 | unsigned char set_flags_mask;
|
|---|
| 402 | unsigned char clr_flags_mask;
|
|---|
| 403 | unsigned char chg_flags_mask;
|
|---|
| 404 | unsigned char arch;
|
|---|
| 405 | };
|
|---|
| 406 |
|
|---|
| 407 | /* Alias definition for 68HC12. */
|
|---|
| 408 | struct m68hc12_opcode_alias
|
|---|
| 409 | {
|
|---|
| 410 | const char* name;
|
|---|
| 411 | const char* translation;
|
|---|
| 412 | unsigned char size;
|
|---|
| 413 | unsigned char code1;
|
|---|
| 414 | unsigned char code2;
|
|---|
| 415 | };
|
|---|
| 416 |
|
|---|
| 417 | /* The opcode table. The table contains all the opcodes (all pages).
|
|---|
| 418 | You can't rely on the order. */
|
|---|
| 419 | extern const struct m68hc11_opcode m68hc11_opcodes[];
|
|---|
| 420 | extern const int m68hc11_num_opcodes;
|
|---|
| 421 |
|
|---|
| 422 | /* Alias table for 68HC12. It translates some 68HC11 insn which are not
|
|---|
| 423 | implemented in 68HC12 but have equivalent translations. */
|
|---|
| 424 | extern const struct m68hc12_opcode_alias m68hc12_alias[];
|
|---|
| 425 | extern const int m68hc12_num_alias;
|
|---|
| 426 |
|
|---|
| 427 | #endif /* _OPCODE_M68HC11_H */
|
|---|
