source: trunk/binutils/include/opcode/d30v.h@ 2712

Last change on this file since 2712 was 610, checked in by bird, 22 years ago

This commit was generated by cvs2svn to compensate for changes in r609,
which included commits to RCS files with non-trunk default branches.
  • Property cvs2svn:cvs-rev set to 1.1.1.2
  • Property svn:eol-style set to native
  • Property svn:executable set to *
File size: 8.7 KB
Line 
1/* d30v.h -- Header file for D30V opcode table
2 Copyright 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
3 Written by Martin Hunt (hunt@cygnus.com), Cygnus Solutions
4
5This file is part of GDB, GAS, and the GNU binutils.
6
7GDB, GAS, and the GNU binutils are free software; you can redistribute
8them and/or modify them under the terms of the GNU General Public
9License as published by the Free Software Foundation; either version
101, or (at your option) any later version.
11
12GDB, GAS, and the GNU binutils are distributed in the hope that they
13will be useful, but WITHOUT ANY WARRANTY; without even the implied
14warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
15the GNU General Public License for more details.
16
17You should have received a copy of the GNU General Public License
18along with this file; see the file COPYING. If not, write to the Free
19Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
20
21#ifndef D30V_H
22#define D30V_H
23
24#define NOP 0x00F00000
25
26/* Structure to hold information about predefined registers. */
27struct pd_reg
28{
29 char *name; /* name to recognize */
30 char *pname; /* name to print for this register */
31 int value;
32};
33
34extern const struct pd_reg pre_defined_registers[];
35int reg_name_cnt PARAMS ((void));
36
37/* the number of control registers */
38#define MAX_CONTROL_REG 64
39
40/* define the format specifiers */
41#define FM00 0
42#define FM01 0x80000000
43#define FM10 0x8000000000000000LL
44#define FM11 0x8000000080000000LL
45
46/* define the opcode classes */
47#define BRA 0
48#define LOGIC 1
49#define IMEM 2
50#define IALU1 4
51#define IALU2 5
52
53/* define the execution condition codes */
54#define ECC_AL 0 /* ALways (default) */
55#define ECC_TX 1 /* F0=True, F1=Don't care */
56#define ECC_FX 2 /* F0=False, F1=Don't care */
57#define ECC_XT 3 /* F0=Don't care, F1=True */
58#define ECC_XF 4 /* F0=Don't care, F1=False */
59#define ECC_TT 5 /* F0=True, F1=True */
60#define ECC_TF 6 /* F0=True, F1=False */
61#define ECC_RESERVED 7 /* reserved */
62#define ECC_MAX ECC_RESERVED
63
64extern const char *d30v_ecc_names[];
65
66/* condition code table for CMP and CMPU */
67extern const char *d30v_cc_names[];
68
69/* The opcode table is an array of struct d30v_opcode. */
70struct d30v_opcode
71{
72 /* The opcode name. */
73 const char *name;
74
75 /* the opcode */
76 int op1; /* first part, "IALU1" for example */
77 int op2; /* the rest of the opcode */
78
79 /* opcode format(s). These numbers correspond to entries */
80 /* in the d30v_format_table */
81 unsigned char format[4];
82
83#define SHORT_M 1
84#define SHORT_M2 5 /* for ld2w and st2w */
85#define SHORT_A 9
86#define SHORT_B1 11
87#define SHORT_B2 12
88#define SHORT_B2r 13
89#define SHORT_B3 14
90#define SHORT_B3r 16
91#define SHORT_B3b 18
92#define SHORT_B3br 20
93#define SHORT_D1r 22
94#define SHORT_D2 24
95#define SHORT_D2r 26
96#define SHORT_D2Br 28
97#define SHORT_U 30 /* unary SHORT_A. ABS for example */
98#define SHORT_F 31 /* SHORT_A with flag registers */
99#define SHORT_AF 33 /* SHORT_A with only the first register a flag register */
100#define SHORT_T 35 /* for trap instruction */
101#define SHORT_A5 36 /* SHORT_A with a 5-bit immediate instead of 6 */
102#define SHORT_CMP 38 /* special form for CMPcc */
103#define SHORT_CMPU 40 /* special form for CMPUcc */
104#define SHORT_A1 42 /* special form of SHORT_A for MACa opcodes where a=1 */
105#define SHORT_AA 44 /* SHORT_A with the first register an accumulator */
106#define SHORT_RA 46 /* SHORT_A with the second register an accumulator */
107#define SHORT_MODINC 48
108#define SHORT_MODDEC 49
109#define SHORT_C1 50
110#define SHORT_C2 51
111#define SHORT_UF 52
112#define SHORT_A2 53
113#define SHORT_NONE 55 /* no operands */
114#define SHORT_AR 56 /* like SHORT_AA but only accept register as third parameter */
115#define LONG 57
116#define LONG_U 58 /* unary LONG */
117#define LONG_Ur 59 /* LONG pc-relative */
118#define LONG_CMP 60 /* special form for CMPcc and CMPUcc */
119#define LONG_M 61 /* Memory long for ldb, stb */
120#define LONG_M2 62 /* Memory long for ld2w, st2w */
121#define LONG_2 63 /* LONG with 2 operands; jmptnz */
122#define LONG_2r 64 /* LONG with 2 operands; bratnz */
123#define LONG_2b 65 /* LONG_2 with modifier of 3 */
124#define LONG_2br 66 /* LONG_2r with modifier of 3 */
125#define LONG_D 67 /* for DJMPI */
126#define LONG_Dr 68 /* for DBRAI */
127#define LONG_Dbr 69 /* for repeati */
128
129 /* the execution unit(s) used */
130 int unit;
131#define EITHER 0
132#define IU 1
133#define MU 2
134#define EITHER_BUT_PREFER_MU 3
135
136 /* this field is used to decide if two instructions */
137 /* can be executed in parallel */
138 long flags_used;
139 long flags_set;
140#define FLAG_0 (1L<<0)
141#define FLAG_1 (1L<<1)
142#define FLAG_2 (1L<<2)
143#define FLAG_3 (1L<<3)
144#define FLAG_4 (1L<<4) /* S (saturation) */
145#define FLAG_5 (1L<<5) /* V (overflow) */
146#define FLAG_6 (1L<<6) /* VA (accumulated overflow) */
147#define FLAG_7 (1L<<7) /* C (carry/borrow) */
148#define FLAG_SM (1L<<8) /* SM (stack mode) */
149#define FLAG_RP (1L<<9) /* RP (repeat enable) */
150#define FLAG_CONTROL (1L<<10) /* control registers */
151#define FLAG_A0 (1L<<11) /* A0 */
152#define FLAG_A1 (1L<<12) /* A1 */
153#define FLAG_JMP (1L<<13) /* instruction is a branch */
154#define FLAG_JSR (1L<<14) /* subroutine call. must be aligned */
155#define FLAG_MEM (1L<<15) /* reads/writes memory */
156#define FLAG_NOT_WITH_ADDSUBppp (1L<<16) /* Old meaning: a 2 word 4 byter operation
157 New meaning: operation cannot be
158 combined in parallel with ADD/SUBppp. */
159#define FLAG_MUL16 (1L<<17) /* 16 bit multiply */
160#define FLAG_MUL32 (1L<<18) /* 32 bit multiply */
161#define FLAG_ADDSUBppp (1L<<19) /* ADDppp or SUBppp */
162#define FLAG_DELAY (1L<<20) /* This is a delayed branch or jump */
163#define FLAG_LKR (1L<<21) /* insn in left slot kills right slot */
164#define FLAG_CVVA (FLAG_5|FLAG_6|FLAG_7)
165#define FLAG_C FLAG_7
166#define FLAG_ALL (FLAG_0 | \
167 FLAG_1 | \
168 FLAG_2 | \
169 FLAG_3 | \
170 FLAG_4 | \
171 FLAG_5 | \
172 FLAG_6 | \
173 FLAG_7 | \
174 FLAG_SM | \
175 FLAG_RP | \
176 FLAG_CONTROL)
177
178 int reloc_flag;
179#define RELOC_PCREL 1
180#define RELOC_ABS 2
181};
182
183extern const struct d30v_opcode d30v_opcode_table[];
184extern const int d30v_num_opcodes;
185
186/* The operands table is an array of struct d30v_operand. */
187struct d30v_operand
188{
189 /* the length of the field */
190 int length;
191
192 /* The number of significant bits in the operand. */
193 int bits;
194
195 /* position relative to Ra */
196 int position;
197
198 /* syntax flags. */
199 long flags;
200};
201extern const struct d30v_operand d30v_operand_table[];
202
203/* Values defined for the flags field of a struct d30v_operand. */
204
205/* this is the destination register; it will be modified */
206/* this is used by the optimizer */
207#define OPERAND_DEST (1)
208
209/* number or symbol */
210#define OPERAND_NUM (2)
211
212/* address or label */
213#define OPERAND_ADDR (4)
214
215/* register */
216#define OPERAND_REG (8)
217
218/* postincrement + */
219#define OPERAND_PLUS (0x10)
220
221/* postdecrement - */
222#define OPERAND_MINUS (0x20)
223
224/* signed number */
225#define OPERAND_SIGNED (0x40)
226
227/* this operand must be shifted left by 3 */
228#define OPERAND_SHIFT (0x80)
229
230/* flag register */
231#define OPERAND_FLAG (0x100)
232
233/* control register */
234#define OPERAND_CONTROL (0x200)
235
236/* accumulator */
237#define OPERAND_ACC (0x400)
238
239/* @ */
240#define OPERAND_ATSIGN (0x800)
241
242/* @( */
243#define OPERAND_ATPAR (0x1000)
244
245/* predecrement mode '@-sp' */
246#define OPERAND_ATMINUS (0x2000)
247
248/* this operand changes the instruction name */
249/* for example, CPMcc, CMPUcc */
250#define OPERAND_NAME (0x4000)
251
252/* fake operand for mvtsys and mvfsys */
253#define OPERAND_SPECIAL (0x8000)
254
255/* let the optimizer know that two registers are affected */
256#define OPERAND_2REG (0x10000)
257
258/* This operand is pc-relative. Note that repeati can have two immediate
259 operands, one of which is pcrel, the other (the IMM6U one) is not. */
260#define OPERAND_PCREL (0x20000)
261
262/* The format table is an array of struct d30v_format. */
263struct d30v_format
264{
265 int form; /* SHORT_A, LONG, etc */
266 int modifier; /* two bit modifier following opcode */
267 unsigned char operands[5];
268};
269extern const struct d30v_format d30v_format_table[];
270
271
272/* an instruction is defined by an opcode and a format */
273/* for example, "add" has one opcode, but three different */
274/* formats, 2 SHORT_A forms and a LONG form. */
275struct d30v_insn
276{
277 struct d30v_opcode *op; /* pointer to an entry in the opcode table */
278 struct d30v_format *form; /* pointer to an entry in the format table */
279 int ecc; /* execution condition code */
280};
281
282/* an expressionS only has one register type, so we fake it */
283/* by setting high bits to indicate type */
284#define REGISTER_MASK 0xFF
285
286#endif /* D30V_H */
Note: See TracBrowser for help on using the repository browser.