source: trunk/kBuild/units/dtrace.kmk@ 2762

# $Id: dtrace.kmk 2726 2014-02-26 23:23:54Z bird $
## @file
# DTrace unit.
#

#
# Copyright (c) 2012-2014 knut st. osmundsen <bird-kBuild-spam-xiv@anduin.net>
#
# This file is part of kBuild.
#
# kBuild is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# kBuild is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with kBuild; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
#
#
# As a special exception you are granted permission to include this file, via
# the kmk include directive, as you wish without this in itself causing the
# resulting makefile, program or whatever to be covered by the GPL license.
# This exception does not however invalidate any other reasons why the makefile,
# program, whatever should not be covered the GPL.
#
#

ifdef UNIT_dtrace
 $(error kBuild: The lex unit was included twice!)
endif
UNIT_dtrace = dtrace

# Add our target properties.
PROPS_TOOLS += DTRACETOOL
PROPS_SINGLE += DTRACETOOL
PROPS_ACCUMULATE_R += DTRACE_HDR_FLAGS DTRACE_OBJ_FLAGS

# Add ourselves to the default source handlers.
KBUILD_SRC_HANDLERS += \
  .d:def_src_handler_dtrace


## wrapper the compile command dependency check.
ifndef NO_COMPILE_CMDS_DEPS
 _DEP_DTRACE_HDR_CMDS = $$(comp-cmds-ex $$($(target)_$(subst :,_,$(source))_DTRACE_HDR_CMDS_PREV_),$$(commands $(out)),FORCE)
 _DEP_DTRACE_OBJ_CMDS = $$(comp-cmds-ex $$($(target)_$(subst :,_,$(source))_DTRACE_OBJ_CMDS_PREV_),$$(commands $(out)),FORCE)
else
 _DEP_DTRACE_HDR_CMDS =
 _DEP_DTRACE_OBJ_CMDS =
endif


##
# Generates the rule for creating a DTrace header from a D source file.
#
# @param    out         The output file.
# @param    cmds        The dtrace command(s).
# @param    lots more
#
define def_dtrace_hdr_rule
$(out): \
                $(deps) \
                $(value _DEP_DTRACE_HDR_CMDS) \
                | \
                $(orderdeps)
        %$$(call MSG_GENERATE,$(target),$$@,$(source))
        $$(QUIET)$$(RM) -f -- $(dep) $(out)

$(cmds)

ifndef NO_COMPILE_CMDS_DEPS
        %$$(QUIET2)$$(APPEND) '$(dep)'
        %$$(QUIET2)$$(APPEND) '$(dep)' 'define $(target)_$(subst :,_,$(source))_DTRACE_HDR_CMDS_PREV_'
        %$$(QUIET2)$$(APPEND) -c '$(dep)' '$(out)'
        %$$(QUIET2)$$(APPEND) '$(dep)' 'endef'
endif

# update globals
_OUT_FILES += $(out)
$(target)_INTERMEDIATES += $(out)

endef # def_dtrace_hdr_rule


##
# Generates the rule for creating a DTrace object file from a D source file
# and a bunch of object files.
#
# @param    out         The output file.
# @param    cmds        The dtrace command(s).
# @param    lots more
#
define def_dtrace_obj_rule
$(out): \
                $(deps) \
                $$$$(filter-out %-dtrace-object-format.o, $$$$($(target)_2_OBJS)) \
                $(value _DEP_DTRACE_OBJ_CMDS) \
                | \
                $(orderdeps)
        %$$(call MSG_GENERATE,$(target),$$@,$(source) ++)
        $$(QUIET)$$(RM) -f -- $(dep) $(out)

$(cmds)

ifndef NO_COMPILE_CMDS_DEPS
        %$$(QUIET2)$$(APPEND) '$(dep)'
        %$$(QUIET2)$$(APPEND) '$(dep)' 'define $(target)_$(subst :,_,$(source))_DTRACE_OBJ_CMDS_PREV_'
        %$$(QUIET2)$$(APPEND) -c '$(dep)' '$(out)'
        %$$(QUIET2)$$(APPEND) '$(dep)' 'endef'
endif

# update globals
_OUT_FILES += $(out)
$(target)_2_OBJS <= $(out)

endef # def_dtrace_hdr_rule


##
# Handler for .d files listed in the SOURCES properties.
#
# .d files are transformed into .h that is used when compiling, thus needing
# to be generated before anything is compiled, and into object files that needs
# to go into the linking.  Mac does not create object files.
#
# The step producing the object file requires all the object files with dtrace
# probes in them as input/output as well, because it adjusts the dtrace symbols
# from UNDEF to IGNORE.  This is really ugly and cannot be expressed in make
# syntax (prerequisite object files being modified).  Fortunately, it works
# fine because the object files won't be used by anyone else before the dtrace
# object file exists.
#
# @param    target      The target file.
# @param    source      The source file.
# @param    lots more
# @returns  quite a bit.
define def_src_handler_dtrace

local type := DTRACE
local tmp  := $(kb-src-tool tool)
ifeq ($(tool),)
$ (error kBuild: $(target) / $(sources) does not have a (DTRACE) tool defined!)
endif
local dtracedir := $($(target)_0_OUTDIR)/dtrace

#
# The header file first.
#

# Figure out all the props.
ifndef TOOL_$(tool)_DTRACE_HDR_CMDS
$(error kBuild: TOOL_$(tool)_DTRACE_HDR_CMDS isn't defined! target=$(target) source=$(source) )
endif
## @todo put the header in a subdir and add this to INCS? Do we have a early per-target hook for this??
local outbase := $(dtracedir)/dtrace/$(basename $(notdir $(source)))
local out := $(outbase).h
local tmp := $(kb-src-prop DTRACE_HDR_FLAGS,flags,left-to-right,)
local tmp := $(kb-src-prop DEPS,deps,left-to-right,$(defpath))
local tmp := $(kb-src-prop ORDERDEPS,orderdeps,left-to-right,$(defpath))
local dirdep := $(call DIRDEP,$(dir $(out)))

# Adjust paths if we got a default path.
ifneq ($(defpath),)
 local source := $(abspathex $(source),$(defpath))
endif

# dependency file.
local dep := $(out)$(SUFF_DEP)
ifndef NO_COMPILE_CMDS_DEPS
 _DEPFILES_INCLUDED += $(dep)
 $(eval includedep $(dep))
endif

# call the tool
local cmds := $(TOOL_$(tool)_DTRACE_HDR_CMDS)
local deps += $(TOOL_$(tool)_DTRACE_DEPEND) $(source)
local orderdeps += $(TOOL_$(tool)_DTRACE_DEPORD) $(dirdep)

# generate the rule.
$(eval $(def_dtrace_hdr_rule))


#
# Adjust the object files and generate one from the D source, if needed.
#
ifn1of ($(bld_trg), $(TOOL_$(tool)_DTRACE_OBJ_NOT_NEEDED))
 # Figure out all the props.
 ifndef TOOL_$(tool)_DTRACE_OBJ_CMDS
 $(error kBuild: TOOL_$(tool)_DTRACE_OBJ_CMDS isn't defined! target=$(target) source=$(source) )
 endif
 local outbase := $(dtracedir)/$(basename $(notdir $(source)))
 local out := $(outbase)-dtrace-object-format.o
 local tmp := $(kb-src-prop DTRACE_OBJ_FLAGS,flags,left-to-right,)
 local tmp := $(kb-src-prop DEPS,deps,left-to-right,$(defpath))
 local tmp := $(kb-src-prop ORDERDEPS,orderdeps,left-to-right,$(defpath))
 local dirdep := $(call DIRDEP,$(dir $(out)))

 # Adjust paths if we got a default path.
 ifneq ($(defpath),)
  local source := $(abspathex $(source),$(defpath))
 endif

 # dependency file.
 local dep := $(out)$(SUFF_DEP)
 ifndef NO_COMPILE_CMDS_DEPS
  _DEPFILES_INCLUDED += $(dep)
  $(eval includedep $(dep))
 endif

 # call the tool
 local cmds := $(TOOL_$(tool)_DTRACE_OBJ_CMDS)
 local deps += $(TOOL_$(tool)_DTRACE_DEPEND) $(source)
 local orderdeps += $(TOOL_$(tool)_DTRACE_DEPORD) $(dirdep)

 # generate the rule.
 $(eval $(def_dtrace_obj_rule))
endif

endef # def_src_handler_dtrace



#
# The pre-target hook.
#
define def_unit_dtrace_target_pre

local dtracedir := $($(target)_0_OUTDIR)/dtrace
$(eval $(target)_INCS += $(dtracedir))

endef #def_unit_dtrace_target_pre