source: trunk/kBuild/tools/GXX32.kmk

Last change on this file was 3567, checked in by bird, 3 years ago

tools/*GCC*,tools/*GXX*: Removed the SLKRUNS/-fmessage-length=0 stuff as it triggers rebuilds when switching between SlickEdit and the command line. If really needed, it belongs in the project's Config.kmk.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 15.9 KB
Line 
1# $Id: GXX32.kmk 3567 2022-06-26 20:00:02Z bird $
2## @file
3# kBuild Tool Config - Generic 32-bit GCC v3.2.x or later using the system GCC, for building C++ code.
4#
5
6#
7# Copyright (c) 2004-2017 knut st. osmundsen <bird-kBuild-spam-xviiv@anduin.net>
8#
9# This file is part of kBuild.
10#
11# kBuild is free software; you can redistribute it and/or modify
12# it under the terms of the GNU General Public License as published by
13# the Free Software Foundation; either version 2 of the License, or
14# (at your option) any later version.
15#
16# kBuild is distributed in the hope that it will be useful,
17# but WITHOUT ANY WARRANTY; without even the implied warranty of
18# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19# GNU General Public License for more details.
20#
21# You should have received a copy of the GNU General Public License
22# along with kBuild; if not, write to the Free Software
23# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24#
25#
26# As a special exception you are granted permission to include this file, via
27# the kmk include directive, as you wish without this in itself causing the
28# resulting makefile, program or whatever to be covered by the GPL license.
29# This exception does not however invalidate any other reasons why the makefile,
30# program, whatever should not be covered the GPL.
31#
32#
33
34TOOL_GXX32 := Generic 32-bit GCC v3.2.x or later using the system GCC, for building C++ code. \
35 More or less Linux/ELF specfic.
36
37# Tool Specific Properties
38ifndef TOOL_GXX32_PREFIX
39 TOOL_GXX32_PREFIX :=
40endif
41ifndef TOOL_GXX32_SUFFIX
42 TOOL_GXX32_SUFFIX := $(HOSTSUFF_EXE)
43endif
44if1of ($(KBUILD_HOST), solaris)
45 TOOL_GXX32_PREFIX2 ?= g
46else
47 TOOL_GXX32_PREFIX2 ?=
48endif
49TOOL_GXX32_SUFFIX2 ?= $(HOSTSUFF_EXE)
50TOOL_GXX32_PREFIX3 ?=
51TOOL_GXX32_SUFFIX3 ?= $(HOSTSUFF_EXE)
52TOOL_GXX32_CC ?= $(TOOL_GXX32_PREFIX)gcc$(TOOL_GXX32_SUFFIX) -m32
53TOOL_GXX32_CXX ?= $(TOOL_GXX32_PREFIX)g++$(TOOL_GXX32_SUFFIX) -m32
54TOOL_GXX32_PCH ?= $(TOOL_GXX32_CXX)
55TOOL_GXX32_AS ?= $(TOOL_GXX32_PREFIX)gcc$(TOOL_GXX32_SUFFIX) -m32
56TOOL_GXX32_AR ?= $(TOOL_GXX32_PREFIX2)ar$(TOOL_GXX32_SUFFIX2)
57TOOL_GXX32_LD ?= $(TOOL_GXX32_PREFIX)g++$(TOOL_GXX32_SUFFIX) -m32
58if1of ($(KBUILD_HOST), solaris)
59 TOOL_GXX32_LD_SYSMOD ?= $(TOOL_GXX32_PREFIX3)ld$(TOOL_GXX32_SUFFIX3)
60else
61 TOOL_GXX32_LD_SYSMOD ?= $(TOOL_GXX32_PREFIX2)ld$(TOOL_GXX32_SUFFIX2)
62endif
63ifndef TOOL_GXX32_LDFLAGS.$(KBUILD_TARGET)
64 TOOL_GXX32_LDFLAGS.dll ?= -shared
65else
66 TOOL_GXX32_LDFLAGS.dll ?= $(TOOL_GXX32_LDFLAGS.$(KBUILD_TARGET))
67endif
68TOOL_GXX32_LDFLAGS.sysmod ?= -r -m elf_i386$(if-expr "$(KBUILD_TARGET)" == "freebsd" || "$(KBUILD_TARGET)" == "gnukfbsd",_fbsd,)
69TOOL_GXX32_LD_SONAME ?= -Wl,-soname=$(firstword $($(1)_SONAME.$(KBUILD_TARGET).$(KBUILD_TYPE)) $($(1)_SONAME.$(KBUILD_TARGET)) $($(1)_SONAME.$(KBUILD_TYPE)) $($(1)_SONAME) $(notdir $(2)))
70ifeq ($(KBUILD_TARGET),os2)
71 TOOL_GXX32_LD_MAP ?= -Zmap=$(1)
72else
73 TOOL_GXX32_LD_MAP ?=
74endif
75ifeq ($(KBUILD_TARGET),os2)
76 TOOL_GXX32_LD_SYSMOD_MAP ?= -Zmap=$(1)
77else
78 TOOL_GXX32_LD_SYSMOD_MAP ?=
79endif
80TOOL_GXX32_OBJCOPY ?= $(TOOL_GXX32_PREFIX2)objcopy$(TOOL_GXX32_SUFFIX)
81
82# General Properties used by kBuild
83TOOL_GXX32_COBJSUFF ?= .o
84TOOL_GXX32_CFLAGS ?=
85TOOL_GXX32_CFLAGS.debug ?= -g
86TOOL_GXX32_CFLAGS.profile ?= -O2 #-g -pg
87TOOL_GXX32_CFLAGS.release ?= -O2
88TOOL_GXX32_CINCS ?=
89TOOL_GXX32_CDEFS ?=
90
91TOOL_GXX32_CXXOBJSUFF ?= .o
92TOOL_GXX32_CXXFLAGS ?=
93TOOL_GXX32_CXXFLAGS.debug ?= -g
94TOOL_GXX32_CXXFLAGS.profile ?= -O2 #-g -pg
95TOOL_GXX32_CXXFLAGS.release ?= -O2
96TOOL_GXX32_CXXINCS ?=
97TOOL_GXX32_CXXDEFS ?=
98
99TOOL_GXX32_PCHOBJSUFF ?= .h.gch
100TOOL_GXX32_PCHFLAGS ?= $(TOOL_GXX32_CXXFLAGS)
101TOOL_GXX32_PCHFLAGS.debug ?= $(TOOL_GXX32_CXXFLAGS.debug)
102TOOL_GXX32_PCHFLAGS.profile ?= $(TOOL_GXX32_CXXFLAGS.profile)
103TOOL_GXX32_PCHFLAGS.release ?= $(TOOL_GXX32_CXXFLAGS.release)
104TOOL_GXX32_PCHINCS ?= $(TOOL_GXX32_CXXINCS)
105TOOL_GXX32_PCHDEFS ?= $(TOOL_GXX32_CXXDEFS)
106
107TOOL_GXX32_ASFLAGS ?= -x assembler-with-cpp
108TOOL_GXX32_ASFLAGS.debug ?= -g
109TOOL_GXX32_ASFLAGS.profile ?= -g
110TOOL_GXX32_ASOBJSUFF ?= .o
111
112TOOL_GXX32_ARFLAGS ?= cr
113TOOL_GXX32_ARLIBSUFF ?= .a
114
115TOOL_GXX32_LDFLAGS ?=
116TOOL_GXX32_LDFLAGS.debug ?= -g
117TOOL_GXX32_LDFLAGS.profile ?= -g
118
119
120## Compile C source.
121# @param $(target) Normalized main target name.
122# @param $(source) Source filename (relative).
123# @param $(obj) Object file name. This shall be (re)created by the compilation.
124# @param $(dep) Dependcy file. This shall be (re)created by the compilation.
125# @param $(flags) Flags.
126# @param $(defs) Definitions. No -D or something.
127# @param $(incs) Includes. No -I or something.
128# @param $(dirdep) Directory creation dependency.
129# @param $(deps) Other dependencies.
130#
131# @param $(outbase) Output basename (full). Use this for list files and such.
132# @param $(objsuff) Object suffix.
133TOOL_GXX32_COMPILE_C_DEPEND =
134TOOL_GXX32_COMPILE_C_DEPORD =
135TOOL_GXX32_COMPILE_C_OUTPUT = $(if-expr "$(use_objcache)" != "",$(outbase).i,)
136TOOL_GXX32_COMPILE_C_USES_KOBJCACHE = $(if-expr "$(use_objcache)" != "",1,)
137define TOOL_GXX32_COMPILE_C_CMDS
138if "$(use_objcache)" != ""
139 $(QUIET)$(KOBJCACHE) -f $(outbase).koc -d $(PATH_OBJCACHE) -t $(bld_trg).$(bld_trg_arch) -p\
140 --kObjCache-cpp $(outbase).i\
141 $(TOOL_GXX32_CC) -E -o -\
142 $(flags) $(qaddprefix sh,-I, $(incs)) $(qaddprefix sh,-D, $(defs))\
143 -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\
144 $(abspath $(source))\
145 --kObjCache-cc $(obj)\
146 $(TOOL_GXX32_CC) -c\
147 $(flags) -fpreprocessed -x c\
148 -o $(obj)\
149 -
150else
151 $(QUIET)$(TOOL_GXX32_CC) -c\
152 $(flags) $(qaddprefix sh,-I, $(incs)) $(qaddprefix sh,-D, $(defs))\
153 -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\
154 -o $(obj)\
155 $(abspath $(source))
156endif
157 $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
158endef
159
160
161## Compile C++ source.
162# @param $(target) Normalized main target name.
163# @param $(source) Source filename (relative).
164# @param $(obj) Object file name. This shall be (re)created by the compilation.
165# @param $(dep) Dependcy file. This shall be (re)created by the compilation.
166# @param $(flags) Flags.
167# @param $(defs) Definitions. No -D or something.
168# @param $(incs) Includes. No -I or something.
169# @param $(dirdep) Directory creation dependency.
170# @param $(deps) Other dependencies.
171# @param $(outbase) Output basename (full). Use this for list files and such.
172# @param $(objsuff) Object suffix.
173TOOL_GXX32_COMPILE_CXX_OUTPUT = $(if-expr "$(use_objcache)" != "",$(outbase).ii,)
174TOOL_GXX32_COMPILE_CXX_DEPEND = $($(target)_1_GCC_PCH_FILE)
175TOOL_GXX32_COMPILE_CXX_DEPORD =
176TOOL_GXX32_COMPILE_CXX_USES_KOBJCACHE = $(if-expr "$(use_objcache)" != "",1,)
177define TOOL_GXX32_COMPILE_CXX_CMDS
178if "$(use_objcache)" != ""
179 $(QUIET)$(KOBJCACHE) -f $(outbase).koc -d $(PATH_OBJCACHE) -t $(bld_trg).$(bld_trg_arch) -p\
180 --kObjCache-cpp $(outbase).ii\
181 $(TOOL_GXX32_CXX) -E -o - $(if-expr defined($(target)_PCH_HDR)\
182 ,-fpch-preprocess -Winvalid-pch -I$($(target)_1_GCC_PCH_DIR) -include $(basename $($(target)_1_GCC_PCH_FILE)),)\
183 $(flags) $(qaddprefix sh,-I, $(incs)) $(qaddprefix sh,-D, $(defs))\
184 -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\
185 $(abspath $(source))\
186 --kObjCache-cc $(obj)\
187 $(TOOL_GXX32_CXX) -c\
188 $(flags) -fpreprocessed $(if-expr defined($(target)_PCH_HDR),-fpch-preprocess,) -x c++\
189 -o $(obj)\
190 -
191else
192 $(QUIET)$(TOOL_GXX32_CXX) -c\
193 $(flags) $(qaddprefix sh,-I, $($(target)_1_GCC_PCH_DIR) $(incs)) $(qaddprefix sh,-D, $(defs))\
194 -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\
195 -o $(obj) $(if-expr defined($(target)_PCH_HDR) \
196 ,-Winvalid-pch -include $(basename $($(target)_1_GCC_PCH_FILE)),) \
197 $(abspath $(source))
198endif
199 $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
200endef
201
202
203## Precompile C++ header.
204# @param $(target) Normalized main target name.
205# @param $(source) Source filename (relative).
206# @param $(obj) Object file name. This shall be (re)created by the compilation.
207# @param $(dep) Dependcy file. This shall be (re)created by the compilation.
208# @param $(flags) Flags.
209# @param $(defs) Definitions. No -D or something.
210# @param $(incs) Includes. No -I or something.
211# @param $(dirdep) Directory creation dependency.
212# @param $(deps) Other dependencies.
213# @param $(outbase) Output basename (full). Use this for list files and such.
214# @param $(objsuff) Object suffix.
215TOOL_GXX32_COMPILE_PCH_OUTPUT = $($(target)_1_GCC_PCH_FILE)
216TOOL_GXX32_COMPILE_PCH_DEPEND =
217TOOL_GXX32_COMPILE_PCH_DEPORD = $($(target)_1_GCC_PCH_DIR)
218define TOOL_GXX32_COMPILE_PCH_CMDS
219 $(QUIET)$(TOOL_GXX32_PCH) -c\
220 $(flags) $(qaddprefix sh,-I, $($(target)_1_GCC_PCH_DIR) $(incs)) $(qaddprefix sh,-D, $(defs))\
221 -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\
222 -o $(obj)\
223 $(abspath $(source))
224 $(INSTALL) --hard-link-files-when-possible -m 0644 -- "$(obj)" "$($(target)_1_GCC_PCH_FILE)"
225 $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
226endef
227
228
229## Compile Assembly source.
230# @param $(target) Normalized main target name.
231# @param $(source) Source filename (relative).
232# @param $(obj) Object file name. This shall be (re)created by the compilation.
233# @param $(dep) Dependcy file. This shall be (re)created by the compilation.
234# @param $(flags) Flags.
235# @param $(defs) Definitions. No -D or something.
236# @param $(incs) Includes. No -I or something.
237# @param $(dirdep) Directory creation dependency.
238# @param $(deps) Other dependencies.
239# @param $(outbase) Output basename (full). Use this for list files and such.
240# @param $(objsuff) Object suffix.
241#
242TOOL_GXX32_COMPILE_AS_OUTPUT =
243TOOL_GXX32_COMPILE_AS_DEPEND =
244TOOL_GXX32_COMPILE_AS_DEPORD =
245define TOOL_GXX32_COMPILE_AS_CMDS
246 $(QUIET)$(TOOL_GXX32_AS) -c\
247 $(flags) $(qaddprefix sh,-I, $(incs)) $(qaddprefix sh,-D, $(defs))\
248 -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\
249 -o $(obj)\
250 $(abspath $(source))
251 $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
252endef
253
254
255## Link library
256# @param $(target) Normalized main target name.
257# @param $(out) Library name.
258# @param $(objs) Object files to put in the library.
259# @param $(flags) Flags.
260# @param $(dirdep) Directory creation dependency.
261# @param $(deps) Other dependencies.
262# @param $(othersrc) Unhandled sources.
263# @param $(outbase) Output basename (full). Use this for list files and such.
264TOOL_GXX32_LINK_LIBRARY_OUTPUT = $(out).ar-script
265TOOL_GXX32_LINK_LIBRARY_DEPEND = $(othersrc)
266TOOL_GXX32_LINK_LIBRARY_DEPORD =
267define TOOL_GXX32_LINK_LIBRARY_CMDS
268 $(QUIET)$(APPEND) $(out).ar-script 'CREATE $(out)'
269 $(QUIET)$(APPEND) -n $(out).ar-script \
270 $(foreach o,$(filter-out %.h.gch,$(objs)), 'ADDMOD $(o)') \
271 $(foreach o,$(filter-out %.def %.imp %.dll,$(othersrc)), 'ADDLIB $(o)')
272 $(if $(filter %.def %.imp %.dll,$(othersrc))\
273 ,$(TOOL_GXX32_AR_IMP) -o $(outbase).imp.a $(filter %.def %.imp %.dll,$(othersrc))\
274 $(NL)$(TAB)$(QUIET)$(APPEND) $(out).ar-script 'ADDLIB $(outbase).imp.a')
275 $(QUIET)$(APPEND) $(out).ar-script 'SAVE'
276 $(QUIET)$(APPEND) $(out).ar-script 'END'
277 $(QUIET)$(REDIRECT) -rti $(out).ar-script -- $(TOOL_GXX32_AR) -M
278endef
279
280
281## Link program
282# @param $(target) Normalized main target name.
283# @param $(out) Program name.
284# @param $(objs) Object files to link together.
285# @param $(libs) Libraries to search.
286# @param $(libpath) Library search paths.
287# @param $(flags) Flags.
288# @param $(dirdep) Directory creation dependency.
289# @param $(deps) Other dependencies.
290# @param $(othersrc) Unhandled sources.
291# @param $(custom_pre) Custom step invoked before linking.
292# @param $(custom_post) Custom step invoked after linking.
293# @param $(outbase) Output basename (full). Use this for list files and such.
294TOOL_GXX32_LINK_PROGRAM_OUTPUT =
295TOOL_GXX32_LINK_PROGRAM_OUTPUT_MAYBE = $(outbase).map
296TOOL_GXX32_LINK_PROGRAM_OUTPUT_DEBUG = $(outbase).debug
297TOOL_GXX32_LINK_PROGRAM_DEBUG_INSTALL_FN = $(2).debug=>$(basename $(3)).debug
298TOOL_GXX32_LINK_PROGRAM_DEPEND = $(foreach lib,$(libs),$(if $(findstring $(lib),$(subst /,x,$(lib))),, $(lib)))\
299 $(filter %.def, $(othersrc))
300TOOL_GXX32_LINK_PROGRAM_DEPORD =
301define TOOL_GXX32_LINK_PROGRAM_CMDS
302 $(QUIET)$(TOOL_GXX32_LD) $(flags) -o $(out) $(filter-out %.h.gch,$(objs))\
303 $(foreach p,$(libpath), -L$(p))\
304 $(foreach lib,$(libs), $(if $(findstring $(lib),$(subst /,x,$(lib))), -l$(patsubst lib%,%,$(lib)), $(lib)))\
305 $(call TOOL_GXX32_LD_MAP,$(outbase).map)
306 ifeq ($(ld_debug),split)
307 $(QUIET)$(TOOL_GXX32_OBJCOPY) --only-keep-debug $(out) $(outbase).debug
308 $(QUIET)$(CHMOD) a-x $(outbase).debug
309 $(QUIET)$(TOOL_GXX32_OBJCOPY) --strip-debug --strip-unneeded --add-gnu-debuglink=$(outbase).debug $(out)
310 endif
311endef
312
313
314## Link DLL
315# @param $(target) Normalized main target name.
316# @param $(out) Program name.
317# @param $(objs) Object files to link together.
318# @param $(libs) Libraries to search.
319# @param $(libpath) Library search paths.
320# @param $(flags) Flags.
321# @param $(dirdep) Directory creation dependency.
322# @param $(deps) Other dependencies.
323# @param $(othersrc) Unhandled sources.
324# @param $(custom_pre) Custom step invoked before linking.
325# @param $(custom_post) Custom step invoked after linking.
326# @param $(outbase) Output basename (full). Use this for list files and such.
327TOOL_GXX32_LINK_DLL_OUTPUT =
328TOOL_GXX32_LINK_DLL_OUTPUT_MAYBE = $(outbase).map
329TOOL_GXX32_LINK_DLL_OUTPUT_DEBUG = $(outbase).debug
330TOOL_GXX32_LINK_DLL_DEBUG_INSTALL_FN = $(2).debug=>$(basename $(3)).debug
331TOOL_GXX32_LINK_DLL_DEPEND = $(foreach lib,$(libs),$(if $(findstring $(lib),$(subst /,x,$(lib))),, $(lib)))\
332 $(filter %.def, $(othersrc))
333TOOL_GXX32_LINK_DLL_DEPORD =
334define TOOL_GXX32_LINK_DLL_CMDS
335 $(QUIET)$(TOOL_GXX32_LD) $(TOOL_GXX32_LDFLAGS.dll) $(flags) -o $(out)\
336 $(if $(filter-out win os2, $(KBUILD_TARGET)),$(call TOOL_GXX32_LD_SONAME,$(target),$(out)))\
337 $(filter-out %.h.gch,$(objs))\
338 $(foreach p,$(libpath), -L$(p))\
339 $(foreach lib,$(libs), $(if $(findstring $(lib),$(subst /,x,$(lib))), -l$(patsubst lib%,%,$(lib)), $(lib)))\
340 $(call TOOL_GXX32_LD_MAP,$(outbase).map)
341 ifeq ($(ld_debug),split)
342 $(QUIET)$(TOOL_GXX32_OBJCOPY) --only-keep-debug $(out) $(outbase).debug
343 $(QUIET)$(CHMOD) a-x $(outbase).debug
344 $(QUIET)$(TOOL_GXX32_OBJCOPY) --strip-debug --strip-unneeded --add-gnu-debuglink=$(outbase).debug $(out)
345 endif
346endef
347
348
349## Link system module (windows aka driver, linux aka kernel module)
350# @param $(target) Normalized main target name.
351# @param $(out) System module name.
352# @param $(objs) Object files to link together.
353# @param $(libs) Libraries to search.
354# @param $(libpath) Library search paths.
355# @param $(flags) Flags.
356# @param $(dirdep) Directory creation dependency.
357# @param $(deps) Other dependencies.
358# @param $(othersrc) Unhandled sources.
359# @param $(custom_pre) Custom step invoked before linking.
360# @param $(custom_post) Custom step invoked after linking.
361# @param $(outbase) Output basename (full). Use this for list files and such.
362TOOL_GXX32_LINK_SYSMOD_OUTPUT =
363TOOL_GXX32_LINK_SYSMOD_OUTPUT_MAYBE = $(outbase).map
364TOOL_GXX32_LINK_SYSMOD_OUTPUT_DEBUG = $(outbase).debug
365TOOL_GXX32_LINK_SYSMOD_DEBUG_INSTALL_FN = $(2).debug=>$(basename $(3)).debug
366TOOL_GXX32_LINK_SYSMOD_DEPEND = $(foreach lib,$(libs),$(if $(findstring $(lib),$(subst /,x,$(lib))),, $(lib)))\
367 $(filter %.def, $(othersrc))
368TOOL_GXX32_LINK_SYSMOD_DEPORD =
369define TOOL_GXX32_LINK_SYSMOD_CMDS
370 $(QUIET)$(TOOL_GXX32_LD_SYSMOD) $(TOOL_GXX32_LDFLAGS.sysmod) $(flags) -o $(out) $(filter-out %.h.gch,$(objs))\
371 $(filter %.def, $(othersrc))\
372 $(foreach p,$(libpath), -L$(p))\
373 $(foreach lib,$(libs), $(if $(findstring $(lib),$(subst /,x,$(lib))), -l$(patsubst lib%,%,$(lib)), $(lib)))\
374 $(call TOOL_GXX32_LD_SYSMOD_MAP,$(outbase).map)
375 ifeq ($(ld_debug),split)
376 $(QUIET)$(TOOL_GXX32_OBJCOPY) --only-keep-debug $(out) $(outbase).debug
377 $(QUIET)$(CHMOD) a-x $(outbase).debug
378 $(QUIET)$(TOOL_GXX32_OBJCOPY) --strip-debug --strip-unneeded --add-gnu-debuglink=$(outbase).debug $(out)
379 endif
380endef
381
Note: See TracBrowser for help on using the repository browser.