source: trunk/ReleaseTool.tmp@ 1736

;  $Id: ReleaseTool.tmp 1602 2011-08-05 10:59:35Z jbs $

;  Change log:
;     11-07-23 JBS   Initial version (replaces obsolete ReleaseTool.CFG
;                    in the repository.)
;     11-88-05 JBS   -  Added comp.os.os2.announce and submit@os2voice.org
;                       to proposed list of addressees
;                    -  Updated the documentation

;  This file is a sample of a file used by ReleaseTool to provide
;  various configuration data to ReleaseTool.cmd (RT).

;  The actual file used by RT is named ReleaseTool.cfg. This file
;  can be editted and saved with that file name.

;  This file contains extensive comments explaining the possible
;  configurations that can be made.

;  SYNTAX: ReleaseTool expects each line to be one of four types:
;  1) Blank/empty lines (which are ignored)

;  2) Comment lines. All text following a semicolon, ";", will be ignored.
;     Any line whose first non-blank is a semicolon, like this line, is
;     a comment line and will be ignored by ReleaseTool.

;     Section and data lines (below) can have end-of-line comments like
;     C++'s // comments EXCEPT that only the LAST semicolon on a data line
;     is considered the start of a comment. Any other semicolons on a data
;     line are considered part of the key_value.

;  3) Section lines. Section lines are of the form:
;        [section-name]
;     Section lines mark the start of a new set of data.  The section
;     name (within the brackets) defines which type of data follows.

;     Details for each section recognized by RT follow.

;  4) Data lines. These lines provide the actual data to ReleaseTool.
;     The format of these lines is:
;        key-name = key-value

;     Leading and trailing whitespace are ignored.

;     Key-name's are case-insensitive. Key-values are case sensitive.

;     Within a section, data lines can be in any order except that DIRECTORY lines,
;     if any, must precede the FILE lines to which they apply.

;     Details for each data line recognized by RT follow.


;  SECTIONS : RT currently supports section names: FTP, NNTP and SMTP.
;     FTP
;        FTP sections are used to define data for uploading one or more files.
;        If the internal REXX FTP code is used (instead of COMMAND's), then
;        an FTP section will be required for each FTP server.
;     NNTP
;        NNTP sections are used to define data for uploading messages to one
;        or more newsgroups on a single newsgroup server. Since the
;        eComstation newsgroups are available only at news.ecomstation.com
;        and since news.ecomstation.com does not offer other newsgroups
;        (comp.os.os2.*, for example), more than one NNTP section will
;        ususally be required.
;     SMTP
;        SMTP sections are used to define data for sending email messages
;        through a single email server. Use multiple SMTP sections if:
;           -  You need to use different "From" addresses (perhaps because you
;              are registered to different lists under different ids
;           -  You want diffferent lists of "To"  addressees. Perhaps you
;              want to send individually addressed emails to particular
;              individfuals/lists.
;        NOTE: Only the first SMTP section is used to send...
;           -  The email requesting commtted work (Task #1)
;           -  The email to Netlabs requesting that the uploaded file be moved (Task #18)
;        For these two tasks the addressees, "To", are hard-coded in RT. (IOW, the "To"
;        setting in the CFG file is not used for these two tasks.

;        All SMTP sections are used when sending announcement emails. So the "To" setting
;        for each section should be a list of addressees who should get an announcemnt using
;        the settings for that section.

;  DATA LINES

;     The following table lists the key-names recognized by ReleaseTool, the
;     sections to which they apply, a code (explained below) and a short description:

;     Key-name      Sections       Codes  Description

;     DESCRIPTION   FTP,NNTP,SMTP   N N   Text used by ReleaseTool to identify to the user the
;                                         section currently "in use" while RT runs.
;     COMMAND       FTP,NNTP,SMTP   N N   An external command to run to perform the task.
;                                         (See COMMAND notes below!)
;     HOST          FTP,NNTP,SMTP   Y N   The host name of the FTP/NNTP/SMTP server
;     PORT          FTP,NNTP,SMTP   N N   Port number. If not set, standard defaults are used.
;     USERID        FTP,NNTP,SMTP   Y N   The userid used to log in
;     PASSWORD      FTP,NNTP,SMTP   Y N   The password used to log in.
;     TO            NNTP,SMTP       Y N   NNTP: Comma-separated list of newsgroups
;                                         SMTP: Comma-separated list of addressees (email address(es))
;     FROM          NNTP,SMTP       Y N   "From" email address
;     SIGNATURE     NNTP,SMTP       N Y   Zero or more lines of "signature"
;     UTCOFFSET     SMTP            N N   Offset from UTC/GMT (e.g. for EST, UTCOFFSET is -0500
;                                         (05 hours, 00 minutes before UTC)
;     DIRECTORY     FTP             N Y   If a change directory command is needed before uploading
;                                         a file, then this key-value should be provided. If more
;                                         than one file is to be uploaded and they are to be uploaded
;                                         into different directories, precede each set of FILE lines
;                                         by an appropriate Directory line.
;     FILE          FTP             N Y   The local name of a file to be uploaded. This should include
;                                         path info if the file is not in the same directory as RT.

;     Codes:
;        First code  : This data can be set in the CFG file and optionally reset while RT runs.
;        Second code : Multiple lines of this data can be set within each section.

;     "Special" key-values:
;        PASSWORD
;           [Hobbes-email] : RT automatically replaces this with the email address from the Hobbes text file.
;        FILE
;           [Release-Zip]  : RT automatically replaces this with FM/2 release zip filename.
;           [Hobbes-text]  : RT automatically replaces this with Hobbes text filename.
;        [Release-Zip] and [Hobbes-text] can also be used as part of a COMMAND key_value

;     COMMAND notes:
;        - If no COMMAND is provided, RT will use internal code to perform the task.
;        - If a COMMAND is provided, all other keys for that section are optional.
;        - If multiple external commands are needed to perform a task, then either
;           - roll them into a CMD file and use COMMAND = call <cmdfile> <parameters>
;           - use "&&" to separate multiple commands run from a single command line. For example:
;              COMMAND = copy a b && copy c d
;        - COMMAND key values may include certain "macros". The syntax for these
;          macros is: ##macroname##. The macros recognized by RT are:
;            HOST, PORT, USERID, PASSWORD, TO, FROM, SUBJECT, UTCOFFSET and MESSAGE_BODY_FILE
;          With the exception of MESSAGE_BODY_FILE, the value for the macro comes from
;          the correspondingly-named key. MESSAGE_BODY_FILE, on the other hand, is replaced
;          with the name of a temporary file which is built by RT and holds all the text
;          of the message to be sent.
;           - NOTE:  Not all keys currently have corresponding macros!
;           - NOTE:  RT recognizes these macros only when they are relevant. For example,
;                    TO is not relevant to FTP transfers so ##TO## would be ignored in an FTP COMMAND.
;           - NOTE:  If macros are used, make sure the corresponding keys have values, via the CFG file
;                    or during execution of RT. RT does not check that each macro has a setting.
;           - NOTE:  If macros are used, keep in mind that their values will become part of a
;                    commandline command. So certain characters may cause problems: " > < / - ^ & |

;     PASSWORD note: Instead of recording passwords in this file, you may prefer to provide them as RT runs.

;     TO/FROM note: Accepted email address formats:
;           "Full name" <user@domain.net>
;           <user@domain.net>
;           user@domain.net
;        If you plan to use the ##TO## or ##FROM## macros, then probably the third form would be the wisest choice
;        because the other two forms have characters which can cause problems when used on a command line.

;     FROM note: For newsgroups you may want to use a disguised/false email address to avoid spam.


[FTP]
Description = Netlabs
Host        = ftp.netlabs.org
Userid      =
Password    =
Directory   = /incoming/fm2
File        = [Release-zip]

[FTP]
Description = Hobbes
Host        = hobbes.nmsu.edu
Userid      = anonymous
Password    = [Hobbes-email]
Directory   = /pub/incoming
File        = [Hobbes-text]
File        = [Release-zip]

[NNTP]
Description = Newsgroup announcement(s) via eComstation news server
Host        = news.ecomstation.nl
;Userid      =
;Password    =
To          = ecomstation.apps
From        = zjsmallz@osworld.net
Signature   = John Small
Signature   = FM/2 Development Team
Signature   = (Remove z's for address)

[NNTP]
Description = Newsgroup announcement(s) via non-eComstation (i.e. "other") news server
Host        =            ; ISP's or free news server
Userid      =
Password    =
To          = comp.os.os2.apps,comp.os.os2.utilities,comp.os.os2.announce     ; "alt.test" can be used for testing
From        = zjsmallz@osworld.net
Signature   = John Small
Signature   = FM/2 Development Team
Signature   = (Remove z's for address)

[SMTP]
;Command     = G:\pmmail\bin\pmmsend -a G:\PMMail\Accounts\ygk_us0.act -t "##USERTD##" -s "##SUBJECT##" -m ##MESSAGE_BODY_FILE##
;Command     = call d:\utils\internet\rexxmail\rexxmail /NewMessageSend "##USERTD## ?subject=##SUBJECT## &body=##MESSAGE_BODY_FILE##" /Address=##FROM## /SMTPServer=##SERVER## /SMTPUSER=##USERID## /SMTPPASSWORD=##PASSWORD## /TimeZone=##UTCOFFSET##
Host        = smtp.toast.net
;Port        = 587
Userid      =
Password    =
To          = "FM/2 Developers" <fm2-dev@netlabs.org>,"FM/2 Users" <fm2-user@netlabs.org>,submit@os2voice.org    ; <== Add other users/lists (separated by commas) as appropriate
From        =
Signature   = FM/2 Development Team
UTCOffset   = -0500