source: trunk/gui/printer/cupswiz/cupswiz.VRX@ 73

Last change on this file since 73 was 73, checked in by Alex Taylor, 7 years ago

CUPSWIZ: fix syntax error under OREXX.
Updated Printer Manager README for 0.82.
File size: 82.6 KB
Line 
1/*:VRX Main
2*/
3/* Main
4*/
5Main:
6/* Process the arguments.
7 Get the parent window.
8*/
9 parse source . calledAs .
10 parent = ""
11 argCount = arg()
12 argOff = 0
13 if( calledAs \= "COMMAND" )then do
14 if argCount >= 1 then do
15 parent = arg(1)
16 argCount = argCount - 1
17 argOff = 1
18 end
19 InitArgs.0 = argCount
20 if( argCount > 0 )then do i = 1 to argCount
21 InitArgs.i = arg( i + argOff )
22 end
23 end; else do
24 call VROptions 'ImplicitNames'
25 call VROptions 'NoEchoQuit'
26 argCount = _ParseParams( arg(1) )
27 end
28 drop calledAs argCount argOff
29
30/* Load the windows
31*/
32 call VRInit
33 parse source . . spec
34 _VREPrimaryWindowPath = ,
35 VRParseFileName( spec, "dpn" ) || ".VRW"
36 _VREPrimaryWindow = ,
37 VRLoad( parent, _VREPrimaryWindowPath )
38 drop parent spec
39 if( _VREPrimaryWindow == "" )then do
40 call VRMessage "", "Cannot load window:" VRError(), ,
41 "Error!"
42 _VREReturnValue = 32000
43 signal _VRELeaveMain
44 end
45
46/* Process events
47*/
48 call Init
49 signal on halt
50 do while( \ VRGet( _VREPrimaryWindow, "Shutdown" ) )
51 _VREEvent = VREvent()
52 interpret _VREEvent
53 end
54_VREHalt:
55 _VREReturnValue = Fini()
56 call VRDestroy _VREPrimaryWindow
57_VRELeaveMain:
58 call VRFini
59exit _VREReturnValue
60
61VRLoadSecondary:
62 __vrlsWait = abbrev( 'WAIT', translate(arg(2)), 1 )
63 if __vrlsWait then do
64 call VRFlush
65 end
66 __vrlsHWnd = VRLoad( VRWindow(), VRWindowPath(), arg(1) )
67 if __vrlsHWnd = '' then signal __vrlsDone
68 if __vrlsWait \= 1 then signal __vrlsDone
69 call VRSet __vrlsHWnd, 'WindowMode', 'Modal'
70 __vrlsTmp = __vrlsWindows.0
71 if( DataType(__vrlsTmp) \= 'NUM' ) then do
72 __vrlsTmp = 1
73 end
74 else do
75 __vrlsTmp = __vrlsTmp + 1
76 end
77 __vrlsWindows.__vrlsTmp = VRWindow( __vrlsHWnd )
78 __vrlsWindows.0 = __vrlsTmp
79 do while( VRIsValidObject( VRWindow() ) = 1 )
80 __vrlsEvent = VREvent()
81 interpret __vrlsEvent
82 end
83 __vrlsTmp = __vrlsWindows.0
84 __vrlsWindows.0 = __vrlsTmp - 1
85 call VRWindow __vrlsWindows.__vrlsTmp
86 __vrlsHWnd = ''
87__vrlsDone:
88return __vrlsHWnd
89
90/*:VRX __NoValue
91*/
92__NoValue:
93 SAY FORMAT( sigl, 6 ) '+++' SOURCELINE( sigl )
94 SAY FORMAT( sigl, 6 ) '+++ Uninitialized variable'
95EXIT sigl
96
97/*:VRX __VXREXX____APPENDS__
98*/
99__VXREXX____APPENDS__:
100/*
101#append ..\..\Shared\PrintUtl.VRS
102*/
103return
104/*:VRX _ParseParams
105*/
106_ParseParams: PROCEDURE EXPOSE InitArgs.
107 /* Parse program parameters when they are provided as a single string,
108 * including handling quotes.
109 */
110
111 parse arg thisArgs
112
113 InitArgs. = ''
114 InitArgs.0 = 0
115
116 do while thisargs <> ''
117
118 parse value strip( thisArgs, "B" ) with curArg thisArgs
119
120 parse var curArg tc1 +1 .
121 if tc1 = '"' | tc1 = "'" then
122 parse value curArg thisArgs with (tc1) curArg (tc1) ThisArgs
123
124 i = InitArgs.0 + 1
125 InitArgs.i = strip( curArg )
126 InitArgs.0 = i
127
128 end /* do while thisArgs <> '' */
129
130RETURN InitArgs.0
131
132/*:VRX CheckPrograms
133*/
134CheckPrograms: PROCEDURE EXPOSE globals.
135
136 /* Make sure CUPS.PDR is installed.
137 */
138 cups_pdr = VRGetIni('PM_PORT_DRIVER', 'CUPS', 'System')
139 IF cups_pdr == '' THEN DO
140 cups_pdr = STREAM( globals.!bootdrv'\OS2\DLL\CUPS.PDR', 'C', 'QUERY EXISTS')
141 IF cups_pdr == '' THEN DO
142 CALL VRMessage VRWindow(),,
143 NLSGetMessage( 78, globals.!bootdrv'\OS2\DLL\CUPS.PDR'),, /* 78: The required program %1 is not installed... */
144 NLSGetMessage( 79 ), 'E' /* 79: Missing File */
145 CALL Quit
146 END
147 ELSE CALL VRSetIni 'PM_PORT_DRIVER', 'CUPS', cups_pdr, 'System'
148 END
149
150 /* Make sure \TCPIP\BIN\CUPSLPR.EXE (required by CUPS.PDR) is installed.
151 */
152 tcpipbin = SysSearchPath('PATH', 'inetd.exe')
153 IF tcpipbin <> '' THEN
154 tcpipbin = VRParseFileName( tcpipbin, 'DP')
155 ELSE
156 tcpipbin = globals.!bootdrv'\TCPIP\BIN'
157 IF \VRFileExists( tcpipbin'\cupslpr.exe') & (SysSearchPath('PATH', 'cupslpr.exe') == '') THEN DO
158 CALL VRMessage VRWindow(),,
159 NLSGetMessage( 78, 'CUPSLPR.EXE'),,
160 NLSGetMessage( 79 ), 'E'
161 CALL Quit
162 END
163
164 /* Make sure GZIP.EXE is installed (required for unpacking PPDs).
165 */
166 gzip_exe = SysSearchPath('PATH', 'gzip.exe')
167 IF gzip_exe == '' THEN gzip_exe = STREAM( DIRECTORY() || '\gzip.exe', 'C', 'QUERY EXISTS')
168 IF gzip_exe == '' THEN DO
169 CALL VRMessage VRWindow(), NLSGetMessage( 78, 'GZIP.EXE'), NLSGetMessage( 79 ), 'E'
170 CALL Quit
171 END
172
173 /* Make sure CUPSPORT.EXE is installed.
174 */
175 port_exe = SysSearchPath('PATH', 'cupsport.exe')
176 IF port_exe == '' THEN port_exe = STREAM( DIRECTORY() || '\cupsport.exe', 'C', 'QUERY EXISTS')
177 IF port_exe == '' THEN DO
178 CALL VRMessage VRWindow(), NLSGetMessage( 78, 'CUPSPORT.EXE'), NLSGetMessage( 79 ), 'E'
179 CALL Quit
180 END
181
182 /* Make sure PRNTOBJ.EXE is installed.
183 */
184 prntobj_exe = SysSearchPath('PATH', 'prntobj.exe')
185 IF prntobj_exe == '' THEN prntobj_exe = STREAM( DIRECTORY() || '\prntobj.exe', 'C', 'QUERY EXISTS')
186 IF prntobj_exe == '' THEN DO
187 CALL VRMessage VRWindow(), NLSGetMessage( 78, 'PRNTOBJ.EXE'), NLSGetMessage( 79 ), 'E'
188 CALL Quit
189 END
190
191RETURN
192
193/*:VRX CHK_CREATEPM_Click
194*/
195CHK_CREATEPM_Click: PROCEDURE
196 set = VRGet( "CHK_CREATEPM", "Set" )
197 CALL VRSet 'DT_PRESDRV', 'Enabled', set
198 CALL VRSet 'DDCB_PRESDRV', 'Enabled', set
199RETURN
200
201/*:VRX ConfirmAndCreate
202*/
203ConfirmAndCreate: PROCEDURE EXPOSE globals.
204
205 globals.!create = 0
206 CALL VRLoadSecondary 'SW_CREATE', 'W'
207 IF globals.!create <> 1 THEN RETURN
208
209 CALL SetPage4
210 CALL VRSet 'WN_MAIN', 'Pointer', 'WAIT'
211 CALL NLSSetText 'DT_INFO', 'Caption', 50 /* 50: Creating printer... */
212 ok = CreatePrinter( globals.!os2printer )
213
214 CALL VRSet 'DT_INFO', 'Caption', ''
215 CALL VRSet 'WN_MAIN', 'Pointer', '<default>'
216
217 IF ok <> 0 THEN DO
218 SELECT
219 WHEN ok == 1 THEN reason = NLSGetMessage( 70 ) /* 70: Error importing PPD file. */
220 WHEN ok == 2 THEN reason = NLSGetMessage( 71, globals.!log1 ) /* 71: Error creating CUPS printer. See %1 for more information. */
221 WHEN ok == 3 THEN reason = NLSGetMessage( 72, globals.!log1 ) /* 72: Error creating printer object. See %1 for more information. */
222 OTHERWISE reason = NLSGetMessage( 73) /* 73: Unknown error. */
223 END
224 CALL VRMessage VRWindow(), NLSGetMessage( 60 ) ||, /* 60: The following error occurred when trying to create the printer: */
225 '0d0a0d0a'x || reason, NLSGetMessage( 56 ), 'E' /* 56: Error Creating Printer */
226 CALL NLSSetText 'DT_INFO', 'Caption', 52 /* 52: The printer could not be created. */
227 CALL NLSSetText 'PB_NEXT', 'Caption', 54 /* 54: Return */
228 END
229 ELSE DO
230 CALL NLSSetText 'DT_INFO', 'Caption', 51 /* 51: The printer has been created. */
231 CALL NLSSetText 'PB_NEXT', 'Caption', 53 /* 53: Create another */
232 END
233 CALL NLSSetText 'PB_CANCEL', 'Caption', 55 /* 55: Close */
234
235 CALL LINEOUT globals.!log1, ''
236 CALL LINEOUT globals.!log1
237
238RETURN
239
240/*:VRX CreateCupsPrinter
241*/
242CreateCupsPrinter: PROCEDURE EXPOSE globals.
243
244 od = DIRECTORY()
245 CALL DIRECTORY globals.!cupsdir'\sbin'
246 cups_cmd = 'lpadmin -p' globals.!prt_name '-E'
247 IF globals.!prt_info <> '' THEN
248 cups_cmd = cups_cmd '-D "'globals.!prt_info'"'
249 IF globals.!prt_loc <> '' THEN
250 cups_cmd = cups_cmd '-L "'globals.!prt_loc'"'
251 IF globals.!prt_dev <> '' THEN
252 cups_cmd = cups_cmd '-v "'globals.!prt_port'" -m' globals.!prt_dev
253 ELSE IF globals.!mode == 2 THEN
254 cups_cmd = cups_cmd '-v "'globals.!prt_port'" -P "'globals.!prt_ppd'"'
255 ELSE DO
256 /*
257 PARSE VAR globals.!prt_ppd (globals.!cupsdir)'\share\cups\model\' model
258 IF model == '' THEN
259 */
260 model = TRANSLATE( globals.!prt_ppd, '/', '\')
261 cups_cmd = cups_cmd '-v "'globals.!prt_port'" -m "'model'"'
262 END
263
264 /* Temporary until we can offer user configuration:
265 */
266 PARSE UPPER VALUE VALUE('LANG',,'OS2ENVIRONMENT') WITH 1 . 4 _ctry 6 .
267 IF ( WORDPOS( _ctry, 'US CA MX BO CO VE PH CL') > 0 ) THEN
268 page = 'Letter'
269 ELSE
270 page = 'A4'
271 cups_cmd = cups_cmd '-o media='page
272
273 CALL LINEOUT globals.!log1, 'Creating CUPS printer using:'
274 CALL LINEOUT globals.!log1, ' ' cups_cmd
275 IF VRFileExists( globals.!log2 ) THEN DO
276 CALL LINEOUT globals.!log2, ''
277 CALL LINEOUT globals.!log2
278 END
279 ADDRESS CMD '@' cups_cmd '1>NUL 2>>' globals.!log2
280 CALL LINEOUT globals.!log1, 'Return code: 0x' || D2X( rc, 4 )
281 IF rc <> 0 THEN
282 CALL LINEOUT globals.!log1, 'See' globals.!log2 'for details.'
283 CALL DIRECTORY od
284 CALL LINEOUT globals.!log1, ''
285
286RETURN rc
287
288/*:VRX CreateOS2Printer
289*/
290/* Creates an OS/2 printer port, queue, and desktop object which point to
291 * the just-created CUPS printer.
292 */
293CreateOS2Printer: PROCEDURE EXPOSE globals.
294 ARG prnt_drv
295
296 IF globals.!remotecups == '' THEN DO
297 host = LoopbackName()
298 printer = globals.!prt_name
299 END
300 ELSE
301 PARSE VAR globals.!remotecups host printer .
302
303 printer_title = globals.!prt_info
304 printer_model = globals.!prt_nick
305 queue_name = GetQueueName( printer_title )
306 port_name = GetNextPortName('CUPS')
307
308 /* Determine the printer driver source directories/files. Yes, this is
309 * repeated from ImportPPD, but we have to do it again here because
310 * (a) we might not have gone through ImportPPD to get to this point, and
311 * (b) even if we did, the repository information might have changed.
312 */
313 driver_path = GetDriverSource( prnt_drv )
314 IF driver_path == '' THEN
315 /* Driver was not found in the repository. Check for a previously-
316 * installed copy under \OS2\DLL.
317 */
318 driver_path = STREAM( globals.!os2dir'\DLL\'prnt_drv'\'prnt_drv'.DRV', 'C', 'QUERY EXISTS')
319
320 IF driver_path == '' THEN DO
321 /* TODO allow the user to browse for the driver on their system */
322 CALL VRMessage VRWindow(),,
323 NLSGetMessage( 61, prnt_drv, globals.!os2dir'\DLL\'prnt_drv ),, /* 61: The printer driver %1 could not be located. If you have the driver files, please copy them to the directory %2 and then try again. */
324 NLSGetMessage( 57 ), 'E' /* 57: Driver Not Found */
325 RETURN 1
326 END
327
328 /* Create a new CUPS port.
329 */
330 port_ok = AddPort_CUPS( port_name, host, printer )
331 IF port_ok > 1 THEN
332 RETURN 1
333
334 /* New logic to create the printer ourselves (instead of using RINSTPRN).
335 * There are two necessary steps: make sure the driver is installed, and
336 * then create the printer object (which causes the underlying device and
337 * queue to be created automatically as well).
338 */
339
340 ok = InstallPrintDriver( prnt_drv, driver_path, printer_model )
341 CALL LINEOUT globals.!log1, 'InstallPrintDriver(' prnt_drv',' driver_path',' printer_model ') RC =' ok
342
343 IF ok == 0 THEN DO
344 ok = CreatePrinterObject( prnt_drv, printer_model,,
345 port_name, queue_name, printer_title )
346 CALL LINEOUT globals.!log1, 'CreatePrinterObject(' prnt_drv',' printer_model ||,
347 ',' port_name',' queue_name',' printer_title ') RC =' ok
348 IF ( ok <> 0 ) & ( printer_model <> 'Generic Postscript Printer') THEN DO
349 CALL LINEOUT globals.!log1, 'Failed to create printer object; trying again with generic driver.'
350 ok = CreatePrinterObject( prnt_drv, 'Generic Postscript Printer',,
351 port_name, queue_name, printer_title )
352 CALL LINEOUT globals.!log1, 'CreatePrinterObject(' prnt_drv', Generic Postscript Printer' ||,
353 ',' port_name',' queue_name',' printer_title ') RC =' ok
354 END
355 END
356
357 IF ok <> 0 THEN DO
358 CALL LINEOUT globals.!log1, 'Printer object creation failed.'
359 IF SysIni('SYSTEM', 'PM_SPOOLER_PRINTER', 'ALL:', 'prt_keys.') == '' THEN DO
360 DO i = 1 TO prt_keys.0
361 key_val = SysIni('SYSTEM', 'PM_SPOOLER_PRINTER', prt_keys.0 )
362 PARSE VAR key_val _kport ';' _ktitle ';' .
363 IF ( _kport == port_name ) & ( _ktitle == printer_title ) THEN DO
364 CALL LINEOUT globals.!log1, 'Cleaning INI entry:' prt_keys.0 '=' key_val
365 CALL SysIni 'SYSTEM', 'PM_SPOOLER_PRINTER_DESCR', prt_keys.0, 'DELETE:'
366 CALL LINEOUT globals.!log1, 'Cleaning INI entry:' prt_keys.0 '=' key_val
367 CALL SysIni 'SYSTEM', 'PM_SPOOLER_PRINTER', prt_keys.0, 'DELETE:'
368 LEAVE
369 END
370 END
371 END
372 CALL LINEOUT globals.!log1, 'Deleting port' port_name
373 CALL DeletePort port_name
374 END
375 ELSE IF port_ok == 1 THEN DO
376 CALL VRMessage VRWindow(),,
377 NLSGetMessage( 62 ),, /* 62: The installed version of CUPS.PDR appears to be out of date. As a result, the desktop printer will not be usable until the desktop is restarted. */
378 NLSGetMessage( 58 ), 'W' /* 58: Port Driver Problem */
379 END
380
381RETURN ok
382
383/*:VRX CreatePrinter
384*/
385CreatePrinter: PROCEDURE EXPOSE globals.
386 ARG create_os2
387
388 cups_etc = globals.!cupsdir'\etc'
389 IF \VRIsDir( cups_etc'\cups\ppd') THEN
390 cups_etc = globals.!cupsroot'\etc'
391 IF \VRIsDir( cups_etc'\cups\ppd') THEN
392 cups_etc = VALUE('ETC',,'OS2ENVIRONMENT')
393 IF \VRIsDir( cups_etc'\cups\ppd') THEN
394 cups_etc = '\etc'
395
396 /* Create the CUPS printer */
397 IF globals.!remotecups == '' THEN DO
398 CALL LINEOUT globals.!log1, 'Local CUPS queue does not exist, creating.'
399 ok = CreateCupsPrinter()
400 IF ok <> 0 THEN
401 RETURN 2 /** RC=2 Error running lpadmin **/
402 END
403
404 /* Now create the OS/2 printer object */
405 IF create_os2 == 1 & globals.!os2driver <> '' THEN DO
406
407 CALL LINEOUT globals.!log1, 'Creating OS/2 printer object:'
408 CALL LINEOUT globals.!log1, 'Mode: ' globals.!mode
409 CALL LINEOUT globals.!log1, 'Driver:' globals.!os2driver
410 CALL LINEOUT globals.!log1, 'Model: ' globals.!prt_nick
411
412 /* Make sure the presentation driver supports the printer */
413 IF globals.!mode == 2 THEN DO
414 /* Always (re)import when a PPD is provided by the user
415 */
416 CALL LINEOUT globals.!log1, 'Importing user-supplied PPD' globals.!prt_ppd
417
418 ok = ImportPPD( globals.!os2driver, globals.!prt_ppd )
419 IF ok <> 0 THEN DO
420 CALL LINEOUT globals.!log1, 'PPD import failed:' ok
421 buttons.1 = NLSGetMessage( 2 ) /* 2: OK */
422 buttons.2 = NLSGetMessage( 3 ) /* 3: Cancel */
423 buttons.0 = 2
424 ok = VRMessage( VRWindow(), NLSGetMessage( 69 ),, /* 69: The printer parameters could not ... PPD file. */
425 NLSGetMessage( 70 ), 'W',, /* 70: Error importing PPD file */
426 'buttons.', 1, 2 )
427 IF ok == 1 THEN
428 CALL PromptForPMName
429 ELSE
430 RETURN 1 /* RC=1 PPD import failed **/
431 END
432 END
433 ELSE DO
434 cups_ppd = globals.!prt_ppd
435 IF cups_ppd == '' THEN DO
436 /* If we didn't have a PPD before, use the CUPS-generated one now
437 * to get the exact model name.
438 */
439 CALL LINEOUT globals.!log1, 'No PPD yet, looking for' cups_etc'\cups\ppd\'globals.!prt_name'.ppd'
440 cups_ppd = STREAM( cups_etc'\cups\ppd\'globals.!prt_name'.ppd', 'C', 'QUERY EXISTS')
441 IF cups_ppd <> '' THEN
442 globals.!prt_nick = GetNameFromPPD( cups_ppd )
443 ELSE
444 CALL LINEOUT globals.!log1, 'PPD not found. Looking for model:' globals.!os2driver'.'globals.!prt_nick
445 END
446 drv_model = PrinterExistsInDRV( globals.!os2driver, globals.!prt_nick )
447 CALL LINEOUT globals.!log1, 'PrinterExistsInDRV(' globals.!os2driver',' globals.!prt_nick '):' drv_model
448 IF drv_model == '' THEN DO
449 IF cups_ppd == '' THEN DO
450 /* CUPS didn't give us a PPD? Hmm, better ask the user for
451 * an existing printer model to use.
452 */
453 CALL LINEOUT globals.!log1, 'CUPS PPD for this printer ('cups_etc'\cups\ppd\'globals.!prt_name'.ppd) does not exist.'
454 CALL LINEOUT globals.!log1, 'Cannot import PPD. Prompting user for preferred printer model.'
455 CALL PromptForPMName
456 END
457 ELSE DO
458 ok = ImportPPD( globals.!os2driver, cups_ppd )
459 IF ok <> 0 THEN DO
460 CALL LINEOUT globals.!log1, 'PPD import failed:' ok
461 CALL VRMessage VRWindow(), NLSGetMessage( 69 ), NLSGetMessage( 70 ), 'W'
462 CALL PromptForPMName
463 /* RETURN 1 RC=1 PPD import failed **/
464 END
465 END
466 END
467 ELSE
468 /* Make sure the name matches, including case */
469 globals.!prt_nick = drv_model
470 END
471
472 ok = CreateOS2Printer( globals.!os2driver )
473 IF ok <> 0 THEN
474 RETURN 3 /** RC=3 Error running rinstprn **/
475 END
476
477RETURN 0
478
479/*:VRX DDCB_PROTOCOL_Change
480*/
481DDCB_PROTOCOL_Change: PROCEDURE EXPOSE globals.
482
483 idx = VRGet('DDCB_PROTOCOL', 'Selected')
484 which = VRMethod('DDCB_PROTOCOL', 'GetItemData', idx )
485 SELECT
486 WHEN which == 1 THEN DO /* IPP */
487 show_queue = 1
488 show_user = 1
489 show_pass = 1
490 show_pick = 0
491 server_caption = 82 /* 82: Printer or server address: */
492 queue_caption = 84 /* 84: Printer queue name: */
493 userid_caption = 86 /* 86: User ID: */
494 END
495 WHEN which == 2 THEN DO /* SOCKET */
496 show_queue = 0
497 show_user = 0
498 show_pass = 0
499 show_pick = 0
500 server_caption = 82 /* 82: Printer or server address: */
501 queue_caption = 84 /* 84: Printer queue name: */
502 userid_caption = 86 /* 86: User ID: */
503 END
504 WHEN which == 3 THEN DO /* LPD */
505 show_queue = 1
506 show_user = 1
507 show_pass = 0
508 show_pick = 0
509 server_caption = 82 /* 82: Printer or server address: */
510 queue_caption = 84 /* 84: Printer queue name: */
511 userid_caption = 87 /* 87: User ID (if required): */
512 END
513 WHEN which == 4 THEN DO /* SMB */
514 show_queue = 1
515 show_user = 1
516 show_pass = 1
517 show_pick = 0
518 server_caption = 83 /* 83: Print server name: */
519 queue_caption = 85 /* 85: Shared printer name: */
520 userid_caption = 86 /* 86: User ID: */
521 END
522 OTHERWISE DO /* CUPS */
523 show_queue = 0
524 show_user = 0
525 show_pass = 0
526 show_pick = 1
527 server_caption = 88 /* 88: CUPS server name: */
528 queue_caption = 89 /* 89: CUPS printer name: */
529 userid_caption = 86 /* 86: User ID: */
530 END
531 END
532
533 r = NLSSetText('DT_SERVER', 'Caption', server_caption )
534 r = NLSSetText('DT_QUEUE', 'Caption', queue_caption )
535 r = NLSSetText('DT_USERID', 'Caption', userid_caption )
536
537 CALL VRSet 'DT_QUEUE', 'Visible', show_queue | show_pick
538 CALL VRSet 'EF_QUEUE', 'Visible', show_queue
539 CALL VRSet 'DT_USERID', 'Visible', show_user
540 CALL VRSet 'EF_USERID', 'Visible', show_user
541 CALL VRSet 'DT_PASSWORD', 'Visible', show_pass
542 CALL VRSet 'EF_PASSWORD', 'Visible', show_pass
543 CALL VRSet 'DDCB_CUPSQUEUES','Visible', show_pick
544
545RETURN
546
547/*:VRX EF_SERVER_LostFocus
548*/
549EF_SERVER_LostFocus: PROCEDURE EXPOSE globals. network_dialog
550
551 idx = VRGet('DDCB_PROTOCOL', 'Selected')
552 which = VRMethod('DDCB_PROTOCOL', 'GetItemData', idx )
553 IF which <> 5 THEN RETURN
554
555 CALL VRMethod 'DDCB_CUPSQUEUES', 'Clear'
556 server = STRIP( VRGet("EF_SERVER", "Value"))
557 IF server == '' THEN RETURN
558
559 IF GetCupsQueues( server ) == 0 THEN RETURN
560
561 /* Sanity check to make sure the dialog wasn't dismissed before lpstat returned */
562 IF network_dialog <> 1 THEN RETURN
563
564 CALL VRMethod 'DDCB_CUPSQUEUES', 'AddStringList', 'cupsdest.'
565RETURN
566
567/*:VRX ExecRINSTPRN
568*/
569ExecRINSTPRN: PROCEDURE EXPOSE globals.
570 PARSE ARG dsc, drv, src, rsp
571
572 od = DIRECTORY()
573 CALL DIRECTORY src
574 rinstprn_cmd = 'rinstprn /DSC:'dsc '/DRV:'drv' /S:'src ,
575 '/T:'globals.!bootdrv '/L1:'globals.!logdir'\rinstprn.log' ,
576 '/R:'rsp
577
578 CALL LINEOUT globals.!log1, 'Creating OS/2 printer using:'
579 CALL LINEOUT globals.!log1, ' ' rinstprn_cmd
580 ADDRESS CMD '@' rinstprn_cmd '1>NUL 2>NUL'
581 CALL LINEOUT globals.!log1, 'Return code: 0x' || D2X( rc, 4 )
582 IF rc <> 0 THEN
583 CALL LINEOUT globals.!log1, 'See' globals.!logdir'\rinstprn.log for details.'
584 CALL DIRECTORY od
585 CALL LINEOUT globals.!log1, ''
586
587RETURN rc
588
589/*:VRX Fini
590*/
591Fini:
592 window = VRWindow()
593 call VRSet window, "Visible", 0
594 drop window
595
596 CALL PrintManCheckIn 'CUPSWIZ DONE'
597
598return 0
599
600/*:VRX GetCupsPorts
601*/
602GetCupsPorts: PROCEDURE EXPOSE globals.
603
604 CALL NLSSetText 'DT_INFO', 'Caption', 30 /* 30: Looking for connected printers. Please wait... */
605
606 lpinfo_cmd = globals.!cupsdir'\sbin\lpinfo.exe -v 2>&1 |rxqueue'
607 snmp_cmd = globals.!cupsdir'\lib\cups\backend\snmp.exe 2>&1 |rxqueue'
608
609 _od = DIRECTORY()
610 CALL DIRECTORY globals.!cupsdir
611 listqueue = RXQUEUE('CREATE')
612 defqueue = RXQUEUE('SET', listqueue )
613
614 /* Use the SNMP backend to find network printers. We do this in addition
615 * to lpinfo because SNMP may provide the actual printer name. We'll
616 * merge this with the output of lpinfo in the next step.
617 */
618 ADDRESS CMD '@' snmp_cmd listqueue
619 DO QUEUED()
620 PARSE PULL line
621 PARSE VAR line _type _uri '"'_identifier'"' .
622 _uri = STRIP( _uri )
623 _type = STRIP( _type )
624 IF _uri == '' THEN ITERATE
625 IF _type <> 'network' THEN ITERATE
626 netnames._uri = _identifier
627 END
628
629 ADDRESS CMD '@' lpinfo_cmd listqueue
630 i = 0
631 DO QUEUED()
632 PARSE PULL line
633 PARSE VAR line _type _name
634 IF _name == '' THEN ITERATE
635 IF _type == 'network' & POS('://', _name ) > 0 THEN DO
636 PARSE VAR _name _protocol '://' _host '/' _queue
637 IF _protocol == 'socket' THEN _protocol = 'AppSocket'
638 ELSE _protocol = TRANSLATE( _protocol )
639 i = i + 1
640 IF _queue <> '' THEN _queue = '(queue '_queue')'
641 IF SYMBOL('netnames._name') == 'VAR' THEN
642 devices.i = NLSGetMessage( 32, _protocol, netnames._name, _host _queue ) /* 32: Detected network printer (%1) "%2" at %3 */
643 ELSE
644 devices.i = NLSGetMessage( 33, _protocol, _host _queue ) /* 33: Detected network printer (%1) at %2 */
645 END
646 ELSE IF _type <> 'direct' THEN ITERATE
647 ELSE DO
648 IF _name == 'hp' THEN ITERATE
649 i = i + 1
650 devices.i = NLSGetMessage( 35, _name ) /* 35: Local printer: %1 */
651 END
652 ports.i = _name
653 END
654 devices.0 = i
655
656 CALL RXQUEUE 'SET', defqueue
657 CALL RXQUEUE 'DELETE', listqueue
658 CALL DIRECTORY _od
659
660 CALL VRSet 'LB_SELECT', 'Painting', 0
661 CALL VRMethod 'LB_SELECT', 'AddStringList', 'devices.',, 'ports.'
662 CALL VRMethod 'LB_SELECT', 'AddString', NLSGetMessage( 34 ),, '' /* 34: Network printer (manual configuration) */
663 CALL VRSet 'LB_SELECT', 'Selected', 1
664 CALL VRSet 'LB_SELECT', 'Painting', 1
665
666 CALL VRSet 'DT_INFO', 'Caption', NLSGetMessage( 31 ) /* 31: Select the connection for this printer. */
667
668RETURN
669
670/*:VRX GetCupsPrinters
671*/
672GetCupsPrinters: PROCEDURE EXPOSE globals. manufacturers.
673
674 CALL NLSSetText 'DT_INFO', 'Caption', 20 /* 20: Getting list of supported printers. Please wait... */
675
676 lpinfo_cmd = globals.!cupsdir'\sbin\lpinfo.exe -m 2>&1 |rxqueue' /* --exclude-schemes drv */
677
678 _od = DIRECTORY()
679 CALL DIRECTORY globals.!cupsdir
680 listqueue = RXQUEUE('CREATE')
681 defqueue = RXQUEUE('SET', listqueue )
682
683 ADDRESS CMD '@' lpinfo_cmd listqueue
684 i = 0
685 makers = ''
686 DO QUEUED()
687 PARSE PULL line
688 /* IF LEFT( line, 6 ) == 'drv://' THEN ITERATE */
689 IF WORD( line, 1 ) == 'raw' THEN ITERATE
690 PARSE VAR line _ppd '.ppd.gz ' _name
691 _ppd = _ppd'.ppd.gz'
692 IF _name == '' THEN DO
693 PARSE VAR line _ppd '.ppd ' _name
694 _ppd = _ppd'.ppd'
695 END
696 IF _name == '' THEN DO
697 PARSE VAR line _ppd _name
698 END
699 IF _name <> '' THEN DO
700 PARSE VAR _name _brand _model
701 IF WORDPOS( _brand, makers ) == 0 THEN makers = makers || _brand' '
702 i = i + 1
703 ppds.i = _ppd
704 models.i = _name
705 END
706 END
707 ppds.0 = i
708 models.0 = i
709
710 CALL RXQUEUE 'SET', defqueue
711 CALL RXQUEUE 'DELETE', listqueue
712 CALL DIRECTORY _od
713
714/* Now build the 'manufacturers' stem.
715 * This stem takes the following format:
716 * manufacturers.0 number of manufacturers
717 * manufacturers.i.!name manufacturer name (e.g. 'Apple')
718 * manufacturers.i.!printers.0 number of printer models
719 * manufacturers.i.!printers.j.!model printer model name, short form (e.g. 'LaserWriter 330')
720 * manufacturers.i.!printers.j.!type driver version/type (e.g. 'Gutenprint v5.2.7')
721 * manufacturers.i.!printers.j.!driver the internal CUPS printer driver name (PPD or URI)
722 * - by preference this is the "simplified" version if available
723 * manufacturers.i.!printers.j.!remark any distinguishing remarks (e.g. 'Simplified')
724 * manufacturers.i.!printers.j.!driver2 alternate driver in case there is more than one (PPD or URI)
725 * - if defined this is usually the non-"simplified" driver
726 * manufacturers.i.!printers.j.!remark2 any distinguishing remarks for the alternate driver
727 */
728 manufacturers.0 = WORDS( makers )
729 DO i = 1 TO manufacturers.0
730 manufacturers.i.!name = WORD( makers, i )
731 manufacturers.i.!printers.0 = 0
732 END
733
734 DO i = 1 TO models.0
735 PARSE VAR models.i _brand _model ' - CUPS+' _type
736 IF _type == '' THEN DO
737 IF POS('hpcups', _model ) > 0 THEN
738 _type = 'HPLIP'
739 ELSE IF POS('hpijs', _model ) > 0 THEN
740 _type = 'HPLIP'
741 ELSE IF ( _type == '') & ( LEFT( ppds.i, 3 ) == 'hp/') THEN
742 _type = 'HPLIP'
743 lc = LASTPOS(',', _model )
744 IF ( _type == 'HPLIP') & ( lc > 1 ) THEN DO
745 _type = _type || SUBSTR( _model, lc )
746 _model = LEFT( _model, lc - 1 )
747 END
748 END
749 man = WORDPOS( _brand, makers )
750 IF man == 0 THEN ITERATE
751
752 PARSE VAR _type _version 'Simplified' .
753 _version = STRIP( _version )
754 _flag = RIGHT( _type, 10 )
755
756 count = manufacturers.man.!printers.0
757 IF count > 0 THEN DO
758 /* If there are two or more printers defined with the same model
759 * name and driver version, keep the first and last as the regular
760 * and alternate drivers; if one if them is 'Simplified', make that
761 * the regular driver by preference.
762 */
763 IF ( TRANSLATE( manufacturers.man.!printers.count.!model ) == TRANSLATE( _model )) THEN DO
764 IF ( manufacturers.man.!printers.count.!type == _version ) THEN DO
765 IF ( WORD( _version, 1 ) == 'Gutenprint') & ( _flag == 'Simplified') THEN DO
766 manufacturers.man.!printers.count.!driver2 = manufacturers.man.!printers.count.!driver
767 manufacturers.man.!printers.count.!remark2 = manufacturers.man.!printers.count.!remark
768 manufacturers.man.!printers.count.!driver = ppds.i
769 manufacturers.man.!printers.count.!remark = 'Simplified'
770 END
771 ELSE DO
772 manufacturers.man.!printers.count.!driver2 = ppds.i
773 IF _flag == 'Simplified' THEN
774 manufacturers.man.!printers.count.!remark2 = 'Simplified'
775 ELSE
776 manufacturers.man.!printers.count.!remark2 = ''
777 END
778 ITERATE
779 END
780 END
781 END
782 count = count + 1
783 manufacturers.man.!printers.count.!model = _model
784 manufacturers.man.!printers.count.!type = _version
785 manufacturers.man.!printers.count.!driver = ppds.i
786 IF _flag == 'Simplified' THEN
787 manufacturers.man.!printers.count.!remark = 'Simplified'
788 ELSE
789 manufacturers.man.!printers.count.!remark = ''
790 manufacturers.man.!printers.count.!driver2 = ''
791 manufacturers.man.!printers.count.!remark2 = ''
792 manufacturers.man.!printers.0 = count
793 END
794
795 /* Add one more category for special items ...
796 */
797 count = manufacturers.0 + 1
798 manufacturers.count.!name = NLSGetMessage( 22 ) /* 22: -- Custom -- */
799 manufacturers.count.!printers.0 = 1
800 manufacturers.count.!printers.1.!model = NLSGetMessage( 23 ) /* 23: -- Other printer (requires PPD) -- */
801 manufacturers.count.!printers.1.!driver = ''
802 manufacturers.count.!printers.1.!type = ''
803 manufacturers.count.!printers.1.!remark = manufacturers.count.!printers.1.!model
804 manufacturers.count.!printers.1.!driver2 = ''
805 manufacturers.count.!printers.1.!remark2 = ''
806 manufacturers.0 = count
807
808RETURN
809
810/*:VRX GetCupsQueues
811*/
812GetCupsQueues: PROCEDURE EXPOSE globals. cupsdest.
813 ARG hostaddr
814
815 /* Try to find lpstat.exe */
816 lpstat_exe = STREAM( globals.!cupsdir'\bin\lpstat.exe', 'C', 'QUERY EXISTS')
817 IF lpstat_exe == '' THEN lpstat_exe = STREAM( globals.!mydir'\lpstat.exe', 'C', 'QUERY EXISTS')
818 IF lpstat_exe == '' THEN lpstat_exe = STREAM( DIRECTORY()'\lpstat.exe', 'C', 'QUERY EXISTS')
819 IF lpstat_exe == '' THEN lpstat_exe = SysSearchPath('PATH', 'lpstat.exe')
820 IF lpstat_exe == '' THEN RETURN 0
821
822 sq = RXQUEUE('CREATE')
823 oq = RXQUEUE('SET', sq )
824
825 CALL VRSet VRWindow(), 'Pointer', 'WAIT'
826 ADDRESS CMD '@'lpstat_exe '-h' hostaddr '-p -c 2>&1 |rxqueue' sq
827 CALL VRSet VRWindow(), 'Pointer', '<default>'
828
829 _count = 0
830 DO QUEUED()
831 PARSE PULL _info
832 IF _info == '' THEN ITERATE
833 IF _info == 'lpstat: Connection refused' THEN LEAVE
834 IF WORD( _info, 1 ) == 'printer' THEN
835 PARSE VAR _info 'printer' _qname .
836 ELSE IF WORD( info, 1 ) == 'class' THEN
837 PARSE VAR _info 'class' _qname .
838 ELSE ITERATE
839 IF _qname == '' THEN ITERATE
840 _count = _count + 1
841 cupsdest._count = _qname
842 END
843 CALL RXQUEUE 'DELETE', sq
844 CALL RXQUEUE 'SET', oq
845
846 cupsdest.0 = _count
847
848RETURN _count
849
850/*:VRX Halt
851*/
852Halt:
853 signal _VREHalt
854return
855
856/*:VRX ImportPPD
857*/
858ImportPPD: PROCEDURE EXPOSE globals.
859 /* Import a new PPD file into a PostScript driver.
860 */
861 ARG driver, ppdfile
862 IF driver == '' THEN driver = 'PSCRIPT'
863
864 CALL LINEOUT globals.!log1, 'Going to import PPD file into driver' driver'.'
865
866 /***
867 *** First, get our working directories and locate the driver source files.
868 ***/
869
870 mustcopy = 0
871 driver_path = GetDriverSource( driver )
872 IF driver_path == '' THEN DO
873 /* No source found. We'll have to try copying the actual installed
874 * driver files from under \OS2\DLL.
875 */
876 CALL LINEOUT globals.!log1, 'Driver source not found.'
877 driver_path = STREAM( globals.!os2dir'\DLL\'driver'\'driver'.DRV', 'C', 'QUERY EXISTS')
878 mustcopy = 1
879 END
880 IF driver_path <> '' THEN DO
881 srcdir = VRParseFilePath( driver_path, 'DP')
882 pin = STREAM( srcdir'\PIN.EXE', 'C', 'QUERY EXISTS')
883 ppdenc = STREAM( srcdir'\PPDENC.EXE', 'C', 'QUERY EXISTS')
884 /* TODO should we check for all the REQUIREDDRIVER FILES as well? */
885 DROP srcdir
886 END
887
888 /* Driver (or one of its required files) was not found.
889 */
890 IF ( driver_path == '') | ( pin == '') | ( ppdenc == '') | ,
891 ( VerifyDriverEAs( driver_path ) == 0 ) THEN
892 DO
893 CALL LINEOUT globals.!log1, ' - Missing required driver files.'
894 /* TODO should prompt for installable driver package? */
895 RETURN 1 /** RC=1 Missing required driver files **/
896 END
897
898 IF mustcopy <> 0 THEN DO
899 /* Looks like the driver wasn't shipped with the OS; we have a source
900 * (either the active files from \OS2\DLL, or a package provided by
901 * the user), but we need somewhere for them to live. The user needs
902 * to tell us where, because they're going to have to specify the
903 * directory later on if they install the driver from PM.
904 */
905 pbtn.1 = NLSGetMessage( 2 ) /* 2: OK */
906 pbtn.2 = NLSGetMessage( 3 ) /* 3: Cancel */
907 pbtn.0 = 2
908 ptext = NLSGetMessage( 63, driver ) ||, /* 63: The install files for the %1 driver could not be located. These files will be recreated from the driver files which are already installed on your system. */
909 '0d0a0d0a'x || NLSGetMessage( 64 ) /* 64: Please enter the directory where the install files will be placed. */
910
911 PARSE VALUE VRGetIni('PM_INSTALL', driver'_DIR', 'USER') WITH drvr_dir '00'x .
912 IF drvr_dir == '' THEN
913 PARSE VALUE VRGetIni('InstPDR', 'PATH_TO_'driver, 'USER') WITH drvr_dir '00'x .
914 ok = VRPrompt('WN_MAIN', ptext, 'drvr_dir', NLSGetMessage( 59 ), 'pbtn.', 1, 2 ) /* 59: Enter Directory */
915 IF ok <> 1 THEN RETURN 9 /** RC=9 User cancelled **/
916 drvr_dir = VRExpandFileName( drvr_dir )
917 DO WHILE drvr_dir == ''
918 ok = VRPrompt('WN_MAIN', ptext, 'drvr_dir',,
919 'Enter Directory', 'pbtn.', 1, 2 )
920 drvr_dir = VRExpandFileName( drvr_dir )
921 END
922
923 /* Now create the new directory, if necessary */
924 IF VRMkDir( drvr_dir ) == 0 THEN
925 RETURN 3 /** RC=3 Failed to copy driver files **/
926 IF CopyDriverToSource( driver_path, drvr_dir ) == 0 THEN
927 RETURN 3 /** RC=3 Failed to copy driver files **/
928
929 /* Make sure we save the location (we'll need this information later) */
930 CALL VRSetIni 'PM_INSTALL', driver'_DIR', drvr_dir||'00'x, 'USER'
931
932 /* Now point to the new copy as the driver we will work on */
933 driver_path = drvr_dir'\'driver'.DRV'
934 END
935
936 workdir = SysTempFileName( globals.!tmpdir'\PPD_????')
937 ok = VrMkDir( workdir )
938 IF ok == 1 THEN ok = VrMkDir( workdir'\OUT')
939 IF ok <> 1 THEN
940 RETURN 2 /** RC=2 Failed to create temporary directory **/
941
942 SELECT
943 WHEN driver == 'ECUPS' THEN ppddir = globals.!repository'\PPD_E'
944 WHEN driver == 'ECUPS-HP' THEN ppddir = globals.!repository'\PPD_EHP'
945 WHEN driver == 'PSPRINT' THEN ppddir = globals.!repository'\PPD_PS'
946 WHEN driver == 'PSPRINT2' THEN ppddir = globals.!repository'\PPD_PS2'
947 WHEN driver == 'PSCRIPT2' THEN ppddir = globals.!repository'\PPD2'
948 OTHERWISE ppddir = globals.!repository'\PPD'
949 END
950
951 /* Make sure ppddir (for keeping PPD files) exists */
952 CALL SysFileTree ppddir, 'dirs.', 'DO'
953 IF dirs.0 == 0 THEN DO
954 ok = VrMkDir( ppddir )
955 IF ok <> 1 THEN
956 RETURN 4 /** RC=4 Failed to create PPD directory **/
957 END
958
959 /***
960 *** Now do the actual work.
961 ***/
962
963 /* Back up the modified files (AUXPRINT.PAK and <driver>.DRV) if we're
964 * working out of the repository.
965 IF mustcopy == 0 THEN DO
966 repfiles.0 = 2
967 repfiles.1 = driver'.DRV'
968 repfiles.2 = 'AUXPRINT.PAK'
969 CALL BackupDrivers driver_path
970 END
971 */
972
973 /* Copy the needed driver files to our working directories.
974 */
975 drv_out = workdir'\OUT\'driver'.DRV'
976 pin_exe = workdir'\PIN.EXE'
977 ppd_exe = workdir'\PPDENC.EXE'
978 ok = VRCopyFile( driver_path, drv_out )
979 IF ok == 1 THEN ok = VRCopyFile( pin, pin_exe )
980 IF ok == 1 THEN ok = VRCopyFile( ppdenc, ppd_exe )
981 IF ok == 0 THEN DO
982 RETURN 3 /*** RC=3 Failed to copy driver files ***/
983 END
984
985 /* Set up the output redirection.
986 */
987 nq = RXQUEUE('CREATE')
988 oq = RXQUEUE('SET', nq )
989
990 /* If the PPD file is compressed, uncompress it.
991 */
992 IF VRParseFilePath( ppdfile, 'E') == 'GZ' THEN DO
993 decppd = workdir'\' || VRParseFilePath( ppdfile, 'N')
994 CALL LINEOUT globals.!log1, 'Decompressing' ppdfile 'to' decppd
995 ADDRESS CMD '@gzip -c -d' ppdfile '| RXQUEUE' nq
996 DO QUEUED()
997 PARSE PULL line
998 CALL LINEOUT decppd, line
999 END
1000 CALL LINEOUT decppd
1001 ppdfile = decppd
1002 END
1003
1004 IF VRFileExists( ppdfile ) == 0 THEN DO
1005 CALL LINEOUT globals.!log1, 'PPD file' ppdfile 'could not be found.'
1006 RETURN 5 /** RC=5 PPD import failed **/
1007 END
1008
1009 ppd_use = ppddir'\' || VRParseFileName( ppdfile, 'NE')
1010
1011 /* Now we have to clean up and validate the PPD file so PIN can use it.
1012 * First, PPDENC converts the codepage if necessary, and copies the results
1013 * to our working directory.
1014 */
1015 CALL LINEOUT globals.!log1, 'Converting PPD with:' ppd_exe ppdfile ppd_use
1016 ADDRESS CMD '@'ppd_exe ppdfile ppd_use '2>NUL | RXQUEUE' nq
1017 DO QUEUED()
1018 PULL output
1019 CALL LINEOUT globals.!log2, output
1020 END
1021 CALL LINEOUT globals.!log2, ''
1022 CALL LINEOUT globals.!log2
1023
1024 IF VRFileExists( ppd_use ) == 0 THEN DO
1025 CALL LINEOUT globals.!log1, 'Hmm,' ppd_use 'was not created. Copying manually.'
1026 CALL VRCopyFile ppdfile, ppd_use
1027 END
1028
1029 /* Next we strip out some problematic lines used which are often encountered
1030 * in (e.g.) CUPS-based PPD files.
1031 */
1032 CALL CleanPPD ppd_use, globals.!log1
1033
1034 /* Preparation complete. Now do the import.
1035 */
1036 count = 0
1037 ADDRESS CMD '@'pin_exe 'ppd' ppddir drv_out '2>NUL | RXQUEUE' nq
1038 DO QUEUED()
1039 PARSE PULL output
1040 CALL LINEOUT globals.!log2, output
1041 PARSE VAR output . 'OK (' nickname
1042 IF nickname <> '' THEN DO
1043 count = count + 1
1044 newprinters.count = STRIP( nickname, 'T', ')')
1045 END
1046 END
1047 newprinters.0 = count
1048 CALL LINEOUT globals.!log2, ''
1049 CALL LINEOUT globals.!log2
1050
1051 /* End the output redirection.
1052 */
1053 CALL RXQUEUE 'SET', oq
1054 CALL RXQUEUE 'DELETE', nq
1055
1056
1057 /***
1058 *** Post-import processing.
1059 ***/
1060
1061 IF newprinters.0 == 0 THEN DO
1062 RETURN 5 /** RC=5 PPD import failed **/
1063 END
1064
1065 /*IF mustcopy == 0 THEN DO*/
1066 IF pmdx <> '' THEN DO
1067 /* If we're working out of the repository, we need to update the
1068 * driver table in PRDESC.LST to add the new driver(s).
1069 */
1070
1071 CALL LINEOUT globals.!log1, 'Updating' globals.!prdesc 'with' newprinters.0 'new entries ...'
1072 count = 0
1073 match_drv = '('driver'.DRV)'
1074 match_len = LENGTH( match_drv )
1075
1076 /* First, copy all lines that don't refer to the driver just updated */
1077 DO WHILE LINES( globals.!prdesc )
1078 _line = LINEIN( globals.!prdesc )
1079 IF TRANSLATE( RIGHT( _line, LENGTH( match_len ))) == match_drv THEN ITERATE
1080 count = count + 1
1081 defs.count = _line
1082 END
1083 CALL STREAM globals.!prdesc, 'C', 'CLOSE'
1084
1085 /* Next, create a new list for the updated driver and merge that in */
1086 newlist = workdir'\'driver'.LST'
1087 CALL CreateDriverList drv_out, newlist
1088 DO WHILE LINES( newlist )
1089 _line = LINEIN( newlist )
1090 count = count + 1
1091 defs.count = _line
1092 END
1093 defs.0 = count
1094
1095 /* Now sort the list and recreate PRDESC.LST */
1096 CALL SysStemSort 'defs.',, 'I'
1097 prdesc_tmp = workdir'\PRDESC.LST'
1098 IF STREAM( prdesc_tmp, 'C', 'QUERY EXISTS') <> '' THEN
1099 CALL VRDeleteFile prdesc_tmp
1100 DO i = 1 TO defs.0
1101 CALL LINEOUT prdesc_tmp, defs.i
1102 END
1103 CALL LINEOUT prdesc_tmp
1104 ok = VRCopyFile( prdesc_tmp, globals.!prdesc )
1105 IF ok == 0 THEN DO
1106 RETURN 6 /** RC=6 Error updating PRDESC.LST **/
1107 END
1108 CALL VRDeleteFile prdesc_tmp
1109
1110 END
1111
1112 /* Finally, copy the updated driver files.
1113 */
1114 target = VRParseFilePath( driver_path, 'DP')
1115 CALL LINEOUT globals.!log1, 'Copying files from' workdir'\OUT to' target
1116 ADDRESS CMD '@UNLOCK' target'\'driver'.DRV 2>NUL 1>NUL'
1117 ok = VRCopyFile( workdir'\OUT\'driver'.DRV', target'\'driver'.DRV')
1118 IF ok == 1 THEN
1119 ok = VRCopyFile( workdir'\OUT\AUXPRINT.PAK', target'\AUXPRINT.PAK')
1120 IF ok == 1 THEN DO
1121 /* Copy the updated files to \OS2\DLL\<driver>, replacing any
1122 * existing copies. (This prevents problems if the OS/2 driver
1123 * installation doesn't/fails to copy them, which can happen under
1124 * some circumstances.)
1125 */
1126 IF VRFileExists( globals.!os2dir'\DLL\'driver ) THEN DO
1127 CALL VRCopyFile workdir'\OUT\AUXPRINT.PAK',,
1128 globals.!os2dir'\DLL\'driver'\AUXPRINT.PAK'
1129 ADDRESS CMD '@UNLOCK' workdir'\OUT\'driver'.DRV 2>NUL 1>NUL'
1130 CALL VRCopyFile workdir'\OUT\'driver'.DRV',,
1131 globals.!os2dir'\DLL\'driver'\'driver'.DRV'
1132 END
1133 END
1134 IF ok == 0 THEN DO
1135 CALL LINEOUT globals.!log1, VRError()
1136 RETURN 3 /*** RC=3 Failed to copy driver files ***/
1137 END
1138
1139 CALL LINEOUT globals.!log1, newprinters.0 'printers imported successfully.'
1140 DO i = 1 TO newprinters.0
1141 CALL LINEOUT globals.!log1, ' ->' newprinters.i
1142 END
1143 CALL LINEOUT globals.!log1, ''
1144 CALL LINEOUT globals.!log1
1145
1146 /* Clean up our work directories.
1147 */
1148 CALL VRDeleteFile workdir'\OUT\*'
1149 CALL VRDeleteFile workdir'\*'
1150 CALL VRRmDir( workdir'\OUT')
1151 CALL VRRmDir( workdir )
1152
1153RETURN 0
1154
1155/*:VRX Init
1156*/
1157Init:
1158 SIGNAL ON NOVALUE NAME __NoValue
1159
1160 /* Hide the VX-REXX console window
1161 */
1162 CALL VRSet 'Console', 'WindowListTitle', ''
1163
1164 CALL RxFuncAdd 'SysLoadFuncs', 'REXXUTIL', 'SysLoadFuncs'
1165 CALL SysLoadFuncs
1166
1167 CALL LoadSettings
1168 CALL SetLanguage
1169 CALL CheckPrograms
1170
1171 _force_remote = 0
1172 globals.!prt_ppd = ''
1173 IF InitArgs.0 > 0 THEN
1174 DO i = 1 TO InitArgs.0
1175 InitArgs.i = TRANSLATE( InitArgs.i )
1176 IF VRIsDir( InitArgs.i ) THEN
1177 globals.!cupsdir = InitArgs.1
1178 ELSE IF InitArgs.i == '/R' THEN DO
1179 globals.!cupsdir = ''
1180 _force_remote = 1
1181 END
1182 ELSE IF VRFileExists( InitArgs.i ) THEN DO
1183 _filetype = VRParseFileName( InitArgs.i, 'E')
1184 IF _filetype == 'PPD' THEN
1185 globals.!prt_ppd = InitArgs.i
1186 END
1187 END
1188
1189 IF globals.!cupsdir == '' & \_force_remote THEN
1190 CALL VRMessage VRWindow(),,
1191 NLSGetMessage( 65, 'CUPSWIZ F:\CUPS') ||, /* 65: CUPS could not be located ... on the command line to this program (e.g "%1"). */
1192 '0d0a0d0a'x || NLSGetMessage( 66 ),, /* 66: Only remote CUPS queues ... start this program with the /R parameter.) */
1193 NLSGetMessage( 28 ), 'E' /* 28: CUPS Path Not Found or Not Valid */
1194
1195 /* Delete the error log file each time the program starts.
1196 */
1197 IF VRFileExists( globals.!log2 ) THEN
1198 CALL VRDeleteFile globals.!log2
1199
1200 CALL PrintManCheckIn 'CUPSWIZ INIT'
1201
1202 window = VRWindow()
1203 call VRMethod window, "CenterWindow"
1204 call VRSet window, "Visible", 1
1205 call VRMethod window, "Activate"
1206 drop window
1207
1208 manufacturers.0 = 0
1209 CALL SetPage1
1210
1211RETURN
1212
1213/*:VRX InitMessageLog
1214*/
1215/* Initialize the message logfile. Unlike the error log, which is cleared and
1216 * recreated every time the program starts, the message log is appended to
1217 * until it reaches 100kB in size. If the message log is larger than 100kB when
1218 * this function is called, it is renamed (with '~' appended to the name) and
1219 * a new message log is started.
1220 */
1221InitMessageLog: PROCEDURE EXPOSE globals.
1222
1223 logsize = STREAM( globals.!log1, 'C', 'QUERY SIZE')
1224 IF ( logsize <> '') & ( logsize > 102400 ) THEN DO
1225 CALL VRCopyFile globals.!log1, globals.!log1 || '~'
1226 CALL VRDeleteFile globals.!log1
1227 END
1228
1229 datestr = DATE('L') TIME('N')
1230 CALL LINEOUT globals.!log1, '--[' datestr ']' ||,
1231 COPIES('-', 73 - LENGTH( datestr ))
1232
1233 CALL LINEOUT globals.!log1, 'System boot volume:' TRANSLATE( globals.!bootdrv )
1234 CALL LINEOUT globals.!log1, 'Local CUPS directory:' TRANSLATE( globals.!cupsdir )
1235 CALL LINEOUT globals.!log1, 'Local driver repository:' TRANSLATE( globals.!repository )
1236 CALL LINEOUT globals.!log1, ''
1237
1238RETURN
1239
1240/*:VRX LB_BRAND_Click
1241*/
1242LB_BRAND_Click: PROCEDURE EXPOSE globals. manufacturers.
1243
1244 CALL VRSet 'WN_MAIN', 'StatusText', ''
1245
1246 index = VRGet('LB_BRAND', 'Selected')
1247 IF index == 0 THEN RETURN
1248
1249 item = VRMethod('LB_BRAND', 'GetItemData', index )
1250 IF item == 0 THEN RETURN
1251
1252 DO i = 1 TO manufacturers.item.!printers.0
1253 models.i = manufacturers.item.!printers.i.!model
1254 /* ppds.i = manufacturers.item.!printers.i.!driver */
1255 IF manufacturers.item.!printers.i.!driver == '' THEN
1256 ppds.i = ''
1257 ELSE
1258 ppds.i = i
1259
1260/* DEBUG
1261say 'Model: ' manufacturers.item.!printers.i.!model
1262say 'Driver: ' manufacturers.item.!printers.i.!driver
1263say ' ' manufacturers.item.!printers.i.!longname
1264if manufacturers.item.!printers.i.!driver2 <> '' then
1265 say 'Alternate:' manufacturers.item.!printers.i.!driver2
1266if manufacturers.item.!printers.i.!longname2 <> '' then
1267 say ' ' manufacturers.item.!printers.i.!longname2
1268say 'Type: ' manufacturers.item.!printers.i.!type
1269say '---'
1270 */
1271
1272 END
1273 models.0 = manufacturers.item.!printers.0
1274 ppds.0 = manufacturers.item.!printers.0
1275
1276 CALL VRSet 'WN_MAIN', 'Pointer', 'WAIT'
1277 CALL VRMethod 'LB_SELECT', 'Clear'
1278 CALL VRSet 'LB_SELECT', 'Painting', 0
1279 CALL VRMethod 'LB_SELECT', 'AddStringList', 'models.',, 'ppds.'
1280 CALL VRSet 'LB_SELECT', 'Painting', 1
1281 CALL VRSet 'WN_MAIN', 'Pointer', '<default>'
1282/* CALL VRSet 'LB_SELECT', 'Selected', 1 */
1283
1284RETURN
1285
1286/*:VRX LB_SELECT_Click
1287*/
1288LB_SELECT_Click: PROCEDURE EXPOSE globals. manufacturers.
1289 SELECT
1290 WHEN globals.!page == 1 THEN DO
1291 CALL VRSet 'WN_MAIN', 'StatusText', ''
1292
1293 brand = VRGet('LB_BRAND', 'Selected')
1294 IF brand == 0 THEN RETURN
1295 selected = VRGet('LB_SELECT', 'Selected')
1296 IF selected == 0 THEN RETURN
1297 which = VRMethod('LB_SELECT', 'GetItemData', selected )
1298 IF which <> '' THEN DO
1299 man = VRMethod('LB_BRAND', 'GetItemData', brand )
1300 IF man == '' THEN RETURN
1301 make = manufacturers.man.!name
1302 model = manufacturers.man.!printers.which.!model
1303 driver = manufacturers.man.!printers.which.!type
1304 IF WORD( driver, 1 ) == 'hpcups' THEN driver = 'HPLIP'
1305 remark = manufacturers.man.!printers.which.!remark
1306 IF driver == '' THEN
1307 type = ''
1308 ELSE IF remark == '' THEN
1309 type = ' ('driver')'
1310 ELSE
1311 type = ' ('driver' - 'remark')'
1312 CALL VRSet 'WN_MAIN', 'StatusText', make model type
1313 END
1314 END
1315
1316 OTHERWISE NOP
1317 END
1318
1319 CALL VRSet 'PB_NEXT', 'Enabled', 1
1320RETURN
1321
1322/*:VRX LoadSettings
1323*/
1324LoadSettings: PROCEDURE EXPOSE globals.
1325
1326 me = VRGet('Application', 'Program')
1327 IF me == '' THEN PARSE SOURCE . . me
1328 globals.!mydir = VRParseFilePath( me, 'DP')
1329
1330 /* Get CUPS paths.
1331 */
1332 PARSE VALUE VRGetIni('eCups', 'CUPS', 'USER') WITH cupsdrv '00'x
1333 IF cupsdrv == '' THEN DO
1334 cupsd_exe = SysSearchPath('PATH', 'cupsd.exe')
1335 IF cupsd_exe <> '' THEN
1336 cupsdrv = FILESPEC('DRIVE', cupsd_exe )
1337 END
1338 IF cupsdrv == '' THEN
1339 cupsdrv = VRParseFilePath( me, 'D') || ':'
1340 ELSE
1341 cupsdrv = STRIP( cupsdrv, 'T', '\')
1342
1343 IF VRIsDir( cupsdrv'\cups') THEN
1344 globals.!cupsdir = cupsdrv'\cups'
1345 ELSE
1346 globals.!cupsdir = cupsdrv'\usr'
1347 globals.!cupsroot = cupsdrv
1348
1349 /* Get system paths.
1350 */
1351 globals.!bootdrv = SysBootDrive()
1352 IF globals.!bootdrv == '' THEN
1353 globals.!bootdrv = FILESPEC('DRIVE', VALUE('OS2_SHELL',,'OS2ENVIRONMENT'))
1354 globals.!os2dir = globals.!bootdrv'\OS2'
1355 globals.!tmpdir = VALUE('TMP',,'OS2ENVIRONMENT')
1356 IF globals.!tmpdir == '' THEN
1357 globals.!tmpdir = VALUE('TEMP',,'OS2ENVIRONMENT')
1358 IF globals.!tmpdir == '' THEN
1359 globals.!tmpdir = globals.!mydir
1360 globals.!logdir = VALUE('LOGFILES',,'OS2ENVIRONMENT')
1361 IF globals.!logdir == '' THEN
1362 globals.!logdir = globals.!mydir
1363
1364 globals.!log1 = globals.!logdir'\cupswiz.l1'
1365 globals.!log2 = globals.!logdir'\cupswiz.l2'
1366
1367 /* Get printer-related paths.
1368 */
1369 PARSE VALUE VRGetIni('PM_INSTALL', 'PDR_DIR', 'USER') WITH repos_dir '00'x .
1370 globals.!repository = repos_dir
1371 globals.!prdrv = STREAM( globals.!os2dir'\install\prdrv.lst', 'C', 'QUERY EXISTS')
1372 globals.!prdesc = STREAM( globals.!os2dir'\install\prdesc.lst', 'C', 'QUERY EXISTS')
1373
1374 /* Set the language file name.
1375 */
1376 globals.!nlsfile = 'cupswz'
1377
1378RETURN 0
1379
1380/*:VRX LoopbackName
1381*/
1382/* Check to see if 'localhost' is defined in the HOSTS file. If not, we'll
1383 * have to use '127.0.0.1' instead.
1384 */
1385LoopbackName: PROCEDURE
1386
1387 lo_name = '127.0.0.1'
1388 etcdir = VALUE('ETC',,'OS2ENVIRONMENT')
1389 IF etcdir <> '' THEN DO
1390 hosts = STREAM( etcdir'\HOSTS', 'C', 'QUERY EXISTS')
1391 IF hosts <> '' THEN DO
1392 CALL LINEIN hosts, 1, 0
1393 DO WHILE LINES( hosts ) > 0
1394 _hostdef = TRANSLATE( LINEIN( hosts ))
1395 _hostdef = TRANSLATE( _hostdef, ' ', '09'x )
1396 IF WORDPOS('LOCALHOST', _hostdef ) == 2 THEN DO
1397 lo_name = 'localhost'
1398 LEAVE
1399 END
1400 END
1401 END
1402 END
1403
1404RETURN lo_name
1405
1406/*:VRX PB_ABOUT_Click
1407*/
1408PB_ABOUT_Click:
1409 CALL SW_ABOUT_Close
1410RETURN
1411
1412/*:VRX PB_CANCEL_Click
1413*/
1414PB_CANCEL_Click:
1415 CALL Quit
1416return
1417
1418/*:VRX PB_CREATECANCEL_Click
1419*/
1420PB_CREATECANCEL_Click:
1421 CALL SW_CREATE_Close
1422RETURN
1423
1424/*:VRX PB_CREATEHELP_Click
1425*/
1426PB_CREATEHELP_Click:
1427 CALL VRMethod 'SW_CREATE', 'InvokeHelp'
1428return
1429
1430/*:VRX PB_CREATEOK_Click
1431*/
1432PB_CREATEOK_Click:
1433
1434 create_os2 = VRGet('CHK_CREATEPM', 'Set')
1435 globals.!os2printer = create_os2
1436 globals.!os2driver = VRGet('DDCB_PRESDRV', 'SelectedString')
1437 globals.!create = 1
1438
1439 CALL SW_CREATE_Close
1440
1441RETURN
1442
1443/*:VRX PB_HELP_Click
1444*/
1445PB_HELP_Click:
1446 CALL VRMethod 'WN_MAIN', 'InvokeHelp'
1447return
1448
1449/*:VRX PB_MODELCANCEL_Click
1450*/
1451PB_MODELCANCEL_Click:
1452 CALL SW_MODEL_Close
1453 globals.!prt_nick = 'Generic PostScript Printer'
1454RETURN
1455
1456/*:VRX PB_MODELOK_Click
1457*/
1458PB_MODELOK_Click:
1459 globals.!prt_nick = VRGet( "LB_OS2MODELS", "SelectedString" )
1460 CALL SW_MODEL_Close
1461RETURN
1462
1463/*:VRX PB_NETCANCEL_Click
1464*/
1465PB_NETCANCEL_Click:
1466 CALL SW_NETWORK_Fini
1467RETURN
1468
1469/*:VRX PB_NETHELP_Click
1470*/
1471PB_NETHELP_Click:
1472 CALL VRMethod 'SW_NETWORK', 'InvokeHelp'
1473return
1474
1475/*:VRX PB_NETOK_Click
1476*/
1477PB_NETOK_Click: PROCEDURE EXPOSE globals. port
1478
1479 idx = VRGet('DDCB_PROTOCOL', 'Selected')
1480 which = VRMethod('DDCB_PROTOCOL', 'GetItemData', idx )
1481 server = STRIP( VRGet("EF_SERVER", "Value"))
1482 pqueue = STRIP( VRGet("EF_QUEUE", "Value"))
1483 cqueue = STRIP( VRGet("DDCB_CUPSQUEUES","Value"))
1484 userid = STRIP( VRGet("EF_USERID", "Value"))
1485 passwd = STRIP( VRGet("EF_PASSWORD", "Value"))
1486
1487 invalid = 0
1488
1489 SELECT
1490 WHEN which == 1 THEN DO /* IPP */
1491 IF server == '' | pqueue == '' THEN invalid = 1
1492 uri = 'ipp://'
1493 IF userid <> '' THEN DO
1494 uri = uri || userid
1495 IF passwd <> '' THEN uri = uri':'passwd
1496 uri = uri'@'
1497 END
1498 uri = uri || server'/'pqueue
1499 END
1500 WHEN which == 2 THEN DO /* SOCKET */
1501 IF server == '' THEN invalid = 1
1502 uri = 'socket://'server
1503 END
1504 WHEN which == 3 THEN DO /* LPD */
1505 IF server == '' THEN invalid = 1
1506 IF pqueue == '' THEN pqueue = '*'
1507 IF userid <> '' THEN
1508 uri = 'ipp://'userid'@'server'/'pqueue
1509 ELSE
1510 uri = 'lpd://'server'/'pqueue
1511 END
1512 WHEN which == 4 THEN DO /* SMB */
1513 IF server == '' | pqueue == '' THEN invalid = 1
1514 uri = 'smb://'
1515 IF userid <> '' THEN DO
1516 uri = uri || userid
1517 IF passwd <> '' THEN uri = uri':'passwd
1518 uri = uri'@'
1519 END
1520 uri = uri || server'/'pqueue
1521 END
1522 OTHERWISE DO /* Existing CUPS */
1523 IF server == '' | cqueue == '' THEN invalid = 1
1524 ELSE DO
1525 globals.!remotecups = server cqueue
1526 uri = ''
1527 END
1528 END
1529 END
1530
1531 IF invalid == 1 THEN DO
1532 CALL VRMessage VRWindow(), NLSGetMessage( 74 ),, /* 74: Missing required value(s). */
1533 NLSGetMessage( 75 ), 'E' /* 75: Missing Value(s) */
1534 RETURN
1535 END
1536
1537 port = uri
1538 CALL SW_NETWORK_Fini
1539
1540RETURN
1541
1542/*:VRX PB_NEXT_Click
1543*/
1544PB_NEXT_Click: PROCEDURE EXPOSE globals. manufacturers.
1545
1546 SELECT
1547 WHEN globals.!page == 1 THEN DO
1548 brand = VRGet('LB_BRAND', 'Selected')
1549 IF brand == 0 THEN RETURN
1550 selected = VRGet('LB_SELECT', 'Selected')
1551 IF selected == 0 THEN RETURN
1552
1553 CALL VRSet 'WN_MAIN', 'StatusText', ''
1554
1555 which = VRMethod('LB_SELECT', 'GetItemData', selected )
1556 IF which == '' THEN DO
1557 globals.!mode = 2 /* Mode 2: user-selected PPD file */
1558 ppd = VRFileDialog( VRWindow(), NLSGetMessage( 24 ), 'O', '*.ppd') /* 24: Select PPD */
1559 IF ppd == '' THEN RETURN
1560 globals.!prt_ppd = ppd
1561 globals.!prt_dev = ''
1562 globals.!prt_nick = GetNameFromPPD( ppd )
1563 IF globals.!prt_nick == '' THEN DO
1564 CALL VRMessage VRWindow(), NLSGetMessage( 76, ppd ),, /* 76: Could not read printer name from %1. */
1565 NLSGetMessage( 77 ), 'E' /* 77: Invalid PPD */
1566 RETURN
1567 END
1568 END
1569 ELSE DO
1570 man = VRMethod('LB_BRAND', 'GetItemData', brand )
1571 IF man == '' THEN DO
1572 /* TODO display an error? But this shouldn't be possible... */
1573 RETURN
1574 END
1575 ppd = manufacturers.man.!printers.which.!driver
1576 globals.!mode = 1 /* Mode 1: CUPS-included model */
1577
1578 /* We're dealing with a device which lpadmin reported as supported
1579 * by the current CUPS installation. In this mode, we will set
1580 * both !prt_ppd and !prt_dev if a path to a PPD file was returned, or
1581 * only !prt_dev if it was reported as a URI (e.g. drv:///whatever) to
1582 * a dynamic PPD.
1583 */
1584 IF POS('://', ppd ) > 0 THEN DO /* lpadmin returned URI for dynamic PPD */
1585 globals.!prt_ppd = ''
1586 globals.!prt_dev = ppd
1587 sel_brand = VRGet('LB_BRAND', 'SelectedString')
1588 sel_name = sel_brand VRMethod('LB_SELECT', 'GetString', selected )
1589 PARSE VAR sel_name _nick ' - CUPS' .
1590 IF _nick == '' THEN
1591 globals.!prt_nick = STRIP( sel_name )
1592 ELSE
1593 globals.!prt_nick = STRIP( _nick )
1594 END
1595 ELSE DO /* lpadmin returned path to an actual PPD */
1596 globals.!prt_dev = ppd /* <-- or is relative_ppd needed for this? */
1597 IF LEFT( ppd, 10 ) == 'lsb/local/' THEN DO
1598 path_to_ppd = globals.!cupsroot'/usr/local/share'
1599 relative_ppd = SUBSTR( ppd, 11 )
1600 END
1601 ELSE IF LEFT( ppd, 8 ) == 'lsb/usr/' THEN DO
1602 path_to_ppd = globals.!cupsroot'/usr/share'
1603 relative_ppd = SUBSTR( ppd, 9 )
1604 END
1605 ELSE DO
1606 path_to_ppd = globals.!cupsdir'/share/cups'
1607 relative_ppd = ppd
1608 END
1609 globals.!prt_ppd = TRANSLATE( path_to_ppd'/ppd/' || relative_ppd, '\', '/')
1610 /* TODO check for '/@unixroot' and replace with globals.!cupsroot if present */
1611 globals.!prt_nick = GetNameFromPPD( globals.!prt_ppd )
1612 IF globals.!prt_nick = '' THEN DO
1613 globals.!prt_ppd = TRANSLATE( path_to_ppd'/model/' || relative_ppd, '\', '/')
1614 globals.!prt_nick = GetNameFromPPD( globals.!prt_ppd )
1615 END
1616 IF globals.!prt_nick = '' THEN DO
1617 CALL VRMessage VRWindow(), NLSGetMessage( 76, globals.!prt_ppd ),, /* 76: Could not read printer name from %1. */
1618 NLSGetMessage( 77 ), 'E' /* 77: Invalid PPD */
1619 RETURN
1620 END
1621 END
1622 END
1623 globals.!remotecups = ''
1624
1625 CALL InitMessageLog
1626 IF globals.!mode == 2 THEN
1627 CALL LINEOUT globals.!log1, 'Starting printer install with user-provided PPD:'
1628 ELSE
1629 CALL LINEOUT globals.!log1, 'Starting printer install for built-in model:' ppd
1630 IF globals.!prt_ppd <> '' THEN
1631 CALL LINEOUT globals.!log1, ' - PPD file: ' globals.!prt_ppd
1632 ELSE
1633 CALL LINEOUT globals.!log1, ' - Device name:' globals.!prt_dev
1634 CALL LINEOUT globals.!log1, ' - Model name: ' globals.!prt_nick
1635 CALL LINEOUT globals.!log1, ''
1636
1637 CALL SetPage2
1638 END
1639
1640 WHEN globals.!page == 2 THEN DO
1641 selected = VRGet('LB_SELECT', 'Selected')
1642 IF selected == 0 THEN RETURN
1643 port = VRMethod('LB_SELECT', 'GetItemData', selected )
1644
1645 IF port == '' THEN DO
1646 /* Network printer selected; prompt for the connection details
1647 */
1648 CALL VRLoadSecondary 'SW_NETWORK', 'W'
1649 END
1650
1651 IF port == '' & globals.!remotecups == '' THEN RETURN
1652 globals.!prt_port = port
1653
1654 CALL SetPage3
1655 END
1656
1657 WHEN globals.!page == 3 THEN DO
1658 globals.!prt_name = STRIP( VRGet('EF_NAME', 'Value'))
1659 globals.!prt_loc = STRIP( VRGet('EF_LOCATION', 'Value'))
1660 globals.!prt_info = STRIP( VRGet('EF_DESC', 'Value'))
1661 IF ((( globals.!prt_name == '') |,
1662 ( globals.!prt_loc == '')) & ( globals.!remotecups == '')) |,
1663 ( globals.!prt_info == '') THEN
1664 DO
1665 IF ( globals.!remotecups <> '') THEN
1666 _errmsg = NLSGetMessage( 42 ) /* 42: You must enter a description. */
1667 ELSE
1668 _errmsg = NLSGetMessage( 43 ) /* 43: You must enter a name, a location, and a description. */
1669 CALL VRMessage VRWindow(), _errmsg, NLSGetMessage( 75 ), 'E' /* 75: Missing Value(s) */
1670 RETURN
1671 END
1672 IF ( globals.!remotecups == '' &,
1673 ( POS( LEFT( globals.!prt_name, 1 ),,
1674 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz') == 0 ) |,
1675 ( VERIFY( globals.!prt_name, '/# ' || '09'x, 'MATCH') <> 0 )) THEN
1676 DO
1677 CALL VRMessage VRWindow(), NLSGetMessage( 44 ),, /* 44: The printer name must start with ... or tab characters. */
1678 NLSGetMessage( 45 ), 'E' /* 45: Invalid Name */
1679 RETURN
1680 END
1681
1682 /* TODO support other drivers
1683 */
1684 IF WORD( globals.!prt_nick, 1 ) == 'Apollo' |,
1685 WORD( globals.!prt_nick, 1 ) == 'HP' |,
1686 WORD( globals.!prt_nick, 1 ) == 'Hewlett-Packard' THEN
1687 globals.!os2driver = 'ECUPS-HP'
1688 ELSE
1689 globals.!os2driver = 'ECUPS'
1690
1691 CALL ConfirmAndCreate
1692 END
1693
1694 WHEN globals.!page == 4 THEN DO
1695 CALL NLSSetText 'PB_NEXT', 'Caption', 5 /* 5: Next > */
1696 CALL VRSet 'EF_NAME', 'Value', ''
1697 CALL VRSet 'EF_LOCATION', 'Value', ''
1698 CALL VRSet 'EF_DESC', 'Value', ''
1699
1700 globals.!prt_ppd = ''
1701 CALL SetPage1
1702 END
1703
1704 OTHERWISE NOP
1705 END
1706
1707RETURN
1708
1709/*:VRX PICT_ICON_Click
1710*/
1711PICT_ICON_Click: PROCEDURE EXPOSE globals.
1712 CALL VRLoadSecondary 'SW_ABOUT', 'W'
1713RETURN
1714
1715/*:VRX PrintManCheckIn
1716*/
1717PrintManCheckIn: PROCEDURE
1718 PARSE ARG data
1719
1720 /* This function attempts to report in to Printer Manager (if it's running)
1721 * by using a named pipe.
1722 */
1723 IF data == '' THEN RETURN 0
1724
1725 npipe = '\PIPE\PRINTMAN'
1726 RC_PIPE_BUSY = '231'
1727
1728 PARSE UPPER VALUE STREAM( npipe, 'C', 'OPEN WRITE') WITH state ':' rc .
1729 IF state <> 'READY' THEN DO
1730 IF rc == RC_PIPE_BUSY THEN
1731 rc = SysWaitNamedPipe( npipe, 0 )
1732 IF rc <> 0 THEN RETURN 0
1733 END
1734 CALL CHAROUT npipe, data
1735 CALL STREAM npipe, 'C', 'CLOSE'
1736
1737RETURN 0
1738
1739/*:VRX PromptForPMName
1740*/
1741PromptForPMName: PROCEDURE EXPOSE globals. models. best
1742 best = MatchPrinterModel( globals.!os2driver, globals.!prt_nick )
1743
1744 IF models.0 == 0 THEN DO
1745 /* No similar models were found in the list of supported printers.
1746 * Just use the generic PS driver.
1747 */
1748 CALL VRMessage VRWindow(), NLSGetMessage( 67, globals.!prt_nick, globals.!os2driver ),, /* 67: The printer "%1" does not ... application support. */
1749 NLSGetMessage( 68 ), 'W' /* 68: Printer Name Not Found */
1750 globals.!prt_nick = 'Generic PostScript Printer'
1751 RETURN
1752 END
1753
1754 CALL VRLoadSecondary 'SW_MODEL', 'W'
1755
1756RETURN
1757
1758/*:VRX Quit
1759*/
1760Quit:
1761 window = VRWindow()
1762 call VRSet window, "Shutdown", 1
1763 drop window
1764return
1765
1766/*:VRX SetLanguage
1767*/
1768SetLanguage: PROCEDURE EXPOSE globals.
1769 PARSE ARG locale
1770
1771 /*
1772 * This function locates the proper language files, and uses the message
1773 * file to sets all UI text. If the language could not be determined, we
1774 * default to English.
1775 */
1776 execPath = VRGet('Application', 'Program')
1777 execDir = VRParseFileName( execPath, 'DP')
1778
1779 /*
1780 * First, figure out what language/message file to use.
1781 */
1782 IF locale <> '' THEN
1783 syslanguage = locale
1784 ELSE
1785 syslanguage = VALUE('LANG',,'OS2ENVIRONMENT')
1786
1787 SELECT
1788 WHEN TRANSLATE( syslanguage ) == 'ZH_TW' THEN nlv = 'tw'
1789 WHEN TRANSLATE( syslanguage ) == 'ZH_CN' THEN nlv = 'cx'
1790 OTHERWISE PARSE VAR syslanguage nlv '_' .
1791 END
1792 nlvfile = globals.!nlsfile || nlv
1793 IF ( STREAM( execDir'\'nlvfile'.msg', 'C', 'QUERY EXISTS') \= '') | ( SysSearchPath('DPATH', nlvfile'.msg') \= '') THEN DO
1794 globals.!messages = nlvfile'.msg'
1795 helpfile = nlvfile'.hlp'
1796 CALL VRSet 'WN_MAIN', 'HelpFile', helpfile
1797 END
1798 ELSE DO
1799 globals.!messages = globals.!nlsfile || 'en.msg'
1800 helpfile = globals.!nlsfile || 'en.hlp'
1801 CALL VRSet 'WN_MAIN', 'HelpFile', helpfile
1802 END
1803
1804 /*
1805 * If the message file is missing or unreadable, display an error and then exit.
1806 */
1807 IF NLSGetMessage( 1 ) == '' THEN DO
1808 CALL VRMessage VRWindow(), 'Language file' TRANSLATE( globals.!messages ) 'could not be loaded.', 'Cannot Continue', 'E'
1809 RETURN 0
1810 END
1811
1812 /*
1813 * Now set the captions for the UI controls on the main window, according
1814 * to the specified language.
1815 */
1816 CALL NLSSetText 'WN_MAIN', 'Caption', 1 /* 1: Create CUPS Printer */
1817 CALL NLSSetText 'PB_NEXT', 'Caption', 5 /* 5: Next > */
1818 CALL NLSSetText 'PB_CANCEL', 'Caption', 3 /* 3: Cancel */
1819 CALL NLSSetText 'PB_HELP', 'Caption', 4 /* 6: Help */
1820
1821RETURN 1
1822
1823/*:VRX SetPage1
1824*/
1825SetPage1: PROCEDURE EXPOSE globals. manufacturers.
1826
1827 CALL VRMethod 'LB_BRAND', 'Clear'
1828
1829 globals.!page = 1
1830 globals.!prt_port = ''
1831 globals.!remotecups = ''
1832 globals.!prt_name = ''
1833 globals.!prt_loc = ''
1834 globals.!prt_info = ''
1835 globals.!os2driver = ''
1836
1837 /* If a PPD was passed on the command line, skip to page 2 */
1838 IF globals.!prt_ppd <> '' THEN DO
1839 globals.!prt_dev = ''
1840 globals.!prt_nick = GetNameFromPPD( globals.!prt_ppd )
1841 IF globals.!prt_nick == '' THEN DO
1842 CALL VRMessage VRWindow(), NLSGetMessage( 76, globals.!prt_ppd ),, /* 76: Could not read printer name from %1. */
1843 NLSGetMessage( 77 ), 'E' /* 77: Invalid PPD */
1844 END
1845 ELSE DO
1846 globals.!mode = 2 /* Mode 2: user-selected PPD file */
1847 globals.!remotecups = ''
1848 CALL InitMessageLog
1849 CALL LINEOUT globals.!log1, 'Starting printer install with user-provided PPD:'
1850 CALL LINEOUT globals.!log1, ''
1851 CALL SetPage2
1852 RETURN
1853 END
1854 END
1855
1856 globals.!prt_ppd = ''
1857 globals.!prt_dev = ''
1858 globals.!prt_nick = ''
1859
1860 CALL VRSet 'PB_NEXT', 'Enabled', 0
1861 CALL VRSet 'LB_BRAND', 'Visible', 1
1862
1863 CALL VRSet 'WN_MAIN', 'HelpTag', 200
1864
1865 /* Resize LB_SELECT if necessary to make room for LB_BRAND */
1866 lb_x = VRGet('LB_BRAND', 'Left') + VRGet('LB_BRAND', 'Width') + 60
1867 lb_w = VRGet('GB_INFO', 'Width') - lb_x + VRGet('GB_INFO', 'Left')
1868 CALL VRSet 'LB_SELECT', 'Left', lb_x
1869 CALL VRSet 'LB_SELECT', 'Width', lb_w
1870
1871 CALL VRSet 'LB_SELECT', 'Visible', 1
1872 CALL VRSet 'GB_INFO', 'Visible', 0
1873
1874 CALL VRSet 'WN_MAIN', 'Pointer', 'WAIT'
1875
1876 IF manufacturers.0 == 0 THEN DO
1877
1878 /* Populate the manufacturer list */
1879 IF globals.!cupsdir == '' THEN DO
1880 manufacturers.1.!name = NLSGetMessage( 22 ) /* 22: -- Custom -- */
1881 manufacturers.1.!printers.0 = 1
1882 manufacturers.1.!printers.1.!model = NLSGetMessage( 23 ) /* 23: -- Other printer (requires PPD) -- */
1883 manufacturers.1.!printers.1.!driver = ''
1884 manufacturers.1.!printers.1.!type = ''
1885 manufacturers.1.!printers.1.!remark = NLSGetMessage( 23 ) /* 23: -- Other printer (requires PPD) -- */
1886 manufacturers.1.!printers.1.!driver2 = ''
1887 manufacturers.1.!printers.1.!remark2 = ''
1888 manufacturers.0 = 1
1889 END
1890 ELSE
1891 CALL GetCupsPrinters
1892
1893 END
1894 CALL NLSSetText 'DT_INFO', 'Caption', 21 /* 21: Select the printer manufacturer and model from the list below. */
1895
1896 CALL VRSet 'LB_BRAND', 'Painting', 0
1897 DO i = 1 TO manufacturers.0
1898 addman.i = manufacturers.i.!name
1899 addidx.i = i
1900 END
1901 addman.0 = manufacturers.0
1902 addidx.0 = manufacturers.0
1903 CALL VRMethod 'LB_BRAND', 'AddStringList', 'addman.',, 'addidx.'
1904 CALL VRSet 'LB_BRAND', 'Painting', 1
1905
1906 CALL VRMethod 'LB_BRAND', 'SetFocus'
1907 CALL VRSet 'LB_BRAND', 'Selected', 1
1908 CALL VRSet 'WN_MAIN', 'Pointer', '<default>'
1909
1910RETURN
1911
1912/*:VRX SetPage2
1913*/
1914SetPage2: PROCEDURE EXPOSE globals.
1915
1916 globals.!page = 2
1917 CALL VRSet 'WN_MAIN', 'HelpTag', 300
1918
1919 CALL VRSet 'LB_BRAND', 'Visible', 0
1920 CALL VRSet 'PB_NEXT', 'Enabled', 0
1921 CALL NLSSetText 'WN_MAIN', 'StatusText', 29, globals.!prt_nick /* 29: Selected printer: %1 */
1922
1923 /* Resize LB_SELECT to the full width of GB_INFO */
1924 lb_x = VRGet('GB_INFO', 'Left')
1925 lb_w = VRGet('GB_INFO', 'Width')
1926 CALL VRSet 'LB_SELECT', 'Left', lb_x
1927 CALL VRSet 'LB_SELECT', 'Width', lb_w
1928
1929 CALL VRMethod 'LB_SELECT', 'Clear'
1930
1931 CALL VRSet 'WN_MAIN', 'Pointer', 'WAIT'
1932 IF globals.!cupsdir == '' THEN DO
1933 CALL VRMethod 'LB_SELECT', 'AddString', NLSGetMessage( 34 ),, '' /* 34: Network printer (manual configuration) */
1934 CALL VRSet 'LB_SELECT', 'Selected', 1
1935 END
1936 ELSE
1937 CALL GetCupsPorts
1938 CALL VRMethod 'LB_SELECT', 'SetFocus'
1939 CALL VRSet 'WN_MAIN', 'Pointer', '<default>'
1940
1941RETURN
1942
1943/*:VRX SetPage3
1944*/
1945SetPage3: PROCEDURE EXPOSE globals.
1946
1947 globals.!page = 3
1948 CALL VRSet 'WN_MAIN', 'HelpTag', 400
1949
1950 CALL VRSet 'EF_DESC', 'Value', globals.!prt_nick
1951 CALL NLSSetText DT_NAME, 'Caption', 103 /* 103: Name: */
1952 CALL NLSSetText DT_LOCATION, 'Caption', 105 /* 105: Location: */
1953 CALL NLSSetText DT_DESC, 'Caption', 106 /* 106: Description: */
1954
1955 CALL VRMethod 'LB_SELECT', 'Clear'
1956
1957 CALL VRSet 'LB_SELECT', 'Visible', 0
1958 CALL VRSet 'GB_INFO', 'Visible', 1
1959 IF globals.!remotecups == '' THEN DO
1960 CALL NLSSetText 'DT_INFO', 'Caption', 40 /* 40: Choose the printer name, and enter its location and a short description. */
1961 CALL VRSet 'DT_NAME', 'Visible', 1
1962 CALL VRSet 'EF_NAME', 'Visible', 1
1963 CALL VRSet 'DT_LOCATION', 'Visible', 1
1964 CALL VRSet 'EF_LOCATION', 'Visible', 1
1965 END
1966 ELSE
1967 CALL NLSSetText 'DT_INFO', 'Caption', 41 /* 41: Enter a short description of this printer. This will be used for the printer object that appears on your desktop. */
1968 CALL VRSet 'DT_DESC', 'Visible', 1
1969 CALL VRSet 'EF_DESC', 'Visible', 1
1970
1971 CALL VRMethod 'EF_NAME', 'SetFocus'
1972
1973RETURN
1974
1975/*:VRX SetPage4
1976*/
1977SetPage4:
1978
1979 globals.!page = 4
1980 CALL VRSet 'WN_MAIN', 'HelpTag', 100
1981
1982 CALL VRSet 'LB_SELECT', 'Visible', 0
1983 CALL VRSet 'GB_INFO', 'Visible', 0
1984 CALL VRSet 'WN_MAIN', 'StatusText', ''
1985
1986RETURN
1987
1988/*:VRX SW_ABOUT_Close
1989*/
1990SW_ABOUT_Close:
1991 call SW_ABOUT_Fini
1992return
1993
1994/*:VRX SW_ABOUT_Create
1995*/
1996SW_ABOUT_Create:
1997 call SW_ABOUT_Init
1998return
1999
2000/*:VRX SW_ABOUT_Fini
2001*/
2002SW_ABOUT_Fini:
2003 window = VRInfo( "Window" )
2004 call VRDestroy window
2005 drop window
2006return
2007/*:VRX SW_ABOUT_Init
2008*/
2009SW_ABOUT_Init:
2010
2011 CALL NLSSetText 'SW_ABOUT', 'Caption', 10 /* 10: Product Information */
2012 CALL NLSSetText 'DT_ABOUT1', 'Caption', 11 /* 11: eCups Printer Install Utility */
2013 CALL NLSSetText 'DT_ABOUT2', 'Caption', 12, '1.16' /* 12: Version %1 */
2014 CALL NLSSetText 'DT_ABOUT3', 'Caption', 13, '2010-2018' /* 13: (C) %1 Alex Taylor */
2015 CALL NLSSetText 'PB_ABOUT', 'Caption', 2 /* 10: Product Information */
2016
2017 CALL NLSSetText 'DT_BOOTDRIVE', 'Caption', 14, TRANSLATE( globals.!bootdrv ) /* 14: System boot volume: %1 */
2018 CALL NLSSetText 'DT_CUPSPATH', 'Caption', 15, TRANSLATE( globals.!cupsdir ) /* 15: Local CUPS directory: %1 */
2019 CALL NLSSetText 'DT_REPOSITORY', 'Caption', 16, TRANSLATE( globals.!repository ) /* 16: Local driver repository: %1 */
2020
2021 window = VRInfo( "Object" )
2022 if( \VRIsChildOf( window, "Notebook" ) ) then do
2023 call VRMethod window, "CenterWindow"
2024 call VRSet window, "Visible", 1
2025 call VRMethod window, "Activate"
2026 end
2027 drop window
2028return
2029
2030/*:VRX SW_CREATE_Close
2031*/
2032SW_CREATE_Close:
2033 call SW_CREATE_Fini
2034return
2035
2036/*:VRX SW_CREATE_Create
2037*/
2038SW_CREATE_Create:
2039 call SW_CREATE_Init
2040return
2041
2042/*:VRX SW_CREATE_Fini
2043*/
2044SW_CREATE_Fini:
2045 window = VRInfo( "Window" )
2046 call VRDestroy window
2047 drop window
2048return
2049/*:VRX SW_CREATE_Init
2050*/
2051SW_CREATE_Init:
2052
2053 CALL VRSet 'SW_CREATE', 'HelpFile', VRGet('WN_MAIN', 'HelpFile')
2054
2055 CALL NLSSetText 'SW_CREATE', 'Caption', 115 /* 115: Confirm Create Printer */
2056 CALL NLSSetText 'DT_CRMODEL', 'Caption', 102 /* 102: Model: */
2057 CALL NLSSetText 'DT_CRLOC', 'Caption', 105 /* 105: Location: */
2058 CALL NLSSetText 'DT_CRDESC', 'Caption', 106 /* 106: Description: */
2059
2060 CALL NLSSetText 'CHK_CREATEPM', 'Caption', 109 /* 109: Create printer object */
2061 CALL NLSSetText 'DT_PRESDRV', 'Caption', 110 /* 110: Presentation driver: */
2062 CALL NLSSetText 'PB_CREATEOK', 'Caption', 111 /* 111: Create */
2063 CALL NLSSetText 'PB_CREATECANCEL', 'Caption', 3 /* 3: Cancel */
2064 CALL NLSSetText 'PB_CREATEHELP', 'Caption', 4 /* 4: ~Help */
2065
2066 CALL VRSet 'EF_CRMODEL', 'Value', globals.!prt_nick
2067
2068 IF globals.!remotecups <> '' THEN DO
2069 /* An existing CUPS printer was indicated. This means we're not
2070 * creating a CUPS printer, but only a PM printer object (and port)
2071 * that points to it.
2072 */
2073 CALL NLSSetText 'DT_CREATE', 'Caption', 101 /* 101: Ready to create printer object with the following parameters. */
2074
2075 PARSE VAR globals.!remotecups cups_host cups_printer .
2076 CALL NLSSetText 'DT_CRNAME', 'Caption', 107 /* 107: CUPS server: */
2077 CALL NLSSetText 'DT_CRURI', 'Caption', 108 /* 108: CUPS queue: */
2078 CALL VRSet 'DT_CRLOC', 'Visible', 0
2079 CALL VRSet 'EF_CRNAME', 'Value', cups_host
2080 CALL VRSet 'EF_CRURI', 'Value', cups_printer
2081 CALL VRSet 'EF_CRLOC', 'Visible', 0
2082 CALL VRSet 'CHK_CREATEPM', 'Visible', 0
2083 END
2084 ELSE DO
2085 CALL NLSSetText 'DT_CREATE', 'Caption', 100 /* 100: Ready to create CUPS printer with the following parameters. */
2086 CALL NLSSetText 'DT_CRNAME', 'Caption', 103 /* 103: Name: */
2087 CALL NLSSetText 'DT_CRURI', 'Caption', 104 /* 104: URI: */
2088 CALL VRSet 'EF_CRNAME', 'Value', globals.!prt_name
2089 CALL VRSet 'EF_CRURI', 'Value', globals.!prt_port
2090 CALL VRSet 'EF_CRLOC', 'Value', globals.!prt_loc
2091 END
2092 CALL VRSet 'EF_CRDESC', 'Value', globals.!prt_info
2093
2094 IF QueryAvailableDrivers() > 0 THEN DO
2095 def_idx = 1
2096 CALL VRMethod 'DDCB_PRESDRV', 'AddStringList', 'drv_list.'
2097 DO i = 1 TO drv_list.0
2098 IF drv_list.i == globals.!os2driver THEN DO
2099 def_idx = i
2100 LEAVE
2101 END
2102 END
2103 CALL VRSet 'DDCB_PRESDRV', 'Selected', def_idx
2104 END
2105 ELSE DO /* 112: No eCups-compatible OS/2 presentation drivers are installed. */
2106 /* 113: Please install the ECUPS or ECUPS-HP printer driver before continuing. */
2107 CALL VRMessage VRWindow(),
2108 NLSGetMessage( 112 ) || '0d0a0d0a'x || NLSGetMessage( 113 ),,
2109 NLSGetMessage( 114 ), 'E' /* 114: Missing PM Driver */
2110 CALL VRSet 'PB_CREATEOK', 'Enabled', 0
2111 /* TODO give an error if no drivers were found */
2112 END
2113
2114 window = VRInfo( "Object" )
2115 if( \VRIsChildOf( window, "Notebook" ) ) then do
2116 call VRMethod window, "CenterWindow"
2117 call VRSet window, "Visible", 1
2118 call VRMethod window, "Activate"
2119 end
2120 drop window
2121
2122RETURN
2123
2124/*:VRX SW_MODEL_Close
2125*/
2126SW_MODEL_Close:
2127 call SW_MODEL_Fini
2128return
2129
2130/*:VRX SW_MODEL_Create
2131*/
2132SW_MODEL_Create:
2133 call SW_MODEL_Init
2134return
2135
2136/*:VRX SW_MODEL_Fini
2137*/
2138SW_MODEL_Fini:
2139
2140 CALL VRSet 'WN_MAIN', 'Pointer', 'WAIT'
2141
2142 window = VRInfo( "Window" )
2143 call VRDestroy window
2144 drop window
2145return
2146/*:VRX SW_MODEL_Init
2147*/
2148SW_MODEL_Init:
2149
2150 CALL NLSSetText 'SW_MODEL', 'Caption', 120 /* 120: Select Printer Model */
2151
2152 /* We should have a list of suggested printer models whose names at least
2153 * partially match the requested model, sorted in order with the closest
2154 * match at the top.
2155 */
2156 ok = VRMethod( "LB_OS2MODELS", "AddStringList", "models.", )
2157 IF best > 0 THEN
2158 CALL VRSet 'LB_OS2MODELS', 'Selected', best
2159
2160 CALL NLSSetText 'DT_MODEL1', 'Caption',,
2161 121, globals.!prt_nick, globals.!os2driver /* 121: The printer "%1" could not ... to applications. */
2162 CALL NLSSetText 'DT_MODEL2', 'Caption', 122 /* 122: You can select one of ... use a generic driver. */
2163
2164 CALL NLSSetText 'PB_MODELOK', 'Caption', 2 /* 2: OK */
2165 CALL NLSSetText 'PB_MODELCANCEL', 'Caption', 3 /* 3: Cancel */
2166
2167 CALL VRSet 'WN_MAIN', 'Pointer', '<default>'
2168
2169 window = VRInfo( "Object" )
2170 if( \VRIsChildOf( window, "Notebook" ) ) then do
2171 call VRMethod window, "CenterWindow"
2172 call VRSet window, "Visible", 1
2173 call VRMethod window, "Activate"
2174 end
2175 drop window
2176
2177RETURN
2178
2179/*:VRX SW_NETWORK_Close
2180*/
2181SW_NETWORK_Close:
2182 call SW_NETWORK_Fini
2183return
2184
2185/*:VRX SW_NETWORK_Create
2186*/
2187SW_NETWORK_Create:
2188 call SW_NETWORK_Init
2189return
2190
2191/*:VRX SW_NETWORK_Fini
2192*/
2193SW_NETWORK_Fini:
2194
2195 network_dialog = 0
2196
2197 window = VRInfo( "Window" )
2198 call VRDestroy window
2199 drop window
2200return
2201/*:VRX SW_NETWORK_Init
2202*/
2203SW_NETWORK_Init:
2204
2205 CALL VRSet 'SW_NETWORK', 'HelpFile', VRGet('WN_MAIN', 'HelpFile')
2206
2207 /* Flag to keep track of whether dialog is open */
2208 network_dialog = 1
2209
2210 CALL NLSSetText 'SW_NETWORK', 'Caption', 80 /* 80: Network Printer */
2211 CALL NLSSetText 'DT_PROTOCOL', 'Caption', 81 /* 81: Network protocol: */
2212 CALL NLSSetText 'DT_PASSWORD', 'Caption', 90 /* 90: Password: */
2213 CALL NLSSetText 'PB_NETOK', 'Caption', 2 /* 2: OK */
2214 CALL NLSSetText 'PB_NETCANCEL', 'Caption', 3 /* 3: Cancel */
2215 CALL NLSSetText 'PB_NETHELP', 'Caption', 4 /* 4: ~Help */
2216
2217 IF globals.!cupsdir == '' THEN DO
2218 protos.0 = 1
2219 protos.1 = NLSGetMessage( 91 ) /* 91: Existing CUPS printer (remote server) */
2220 pnums.0 = 1
2221 pnums.1 = 5
2222 END
2223 ELSE DO
2224 protos.0 = 5
2225 protos.1 = NLSGetMessage( 92 ) /* 92: Internet Printing Protocol (IPP) */
2226 protos.2 = NLSGetMessage( 93 ) /* 93: AppSocket/JetDirect */
2227 protos.3 = NLSGetMessage( 94 ) /* 94: Line Printer Remote daemon (LPD) */
2228 protos.4 = NLSGetMessage( 95 ) /* 95: Windows/SMB network */
2229 protos.5 = NLSGetMessage( 96 ) /* 96: Existing CUPS printer */
2230 pnums.0 = 5
2231 pnums.1 = 1
2232 pnums.2 = 2
2233 pnums.3 = 3
2234 pnums.4 = 4
2235 pnums.5 = 5
2236 END
2237
2238 CALL VRMethod 'DDCB_PROTOCOL', 'AddStringList', 'protos.',, 'pnums.'
2239 CALL VRSet 'DDCB_PROTOCOL', 'Selected', 1
2240
2241 window = VRInfo( "Object" )
2242 if( \VRIsChildOf( window, "Notebook" ) ) then do
2243 call VRMethod window, "CenterWindow"
2244 call VRSet window, "Visible", 1
2245 call VRMethod window, "Activate"
2246 end
2247 drop window
2248return
2249
2250/*:VRX WN_MAIN_Close
2251*/
2252WN_MAIN_Close:
2253 call Quit
2254return
2255
Note: See TracBrowser for help on using the repository browser.