Context Navigation

cupswiz.VRX@ 36

Last change on this file since 36 was 34, checked in by Alex Taylor, 13 years ago
Improved CUPSWIZ command-line parameter parsing logic.
File size: 76.4 KB

Line
1	/*:VRX Main
2	*/
3	/* Main
4	*/
5	Main:
6	/* Process the arguments.
7	Get the parent window.
8	*/
9	parse source . calledAs .
10	parent = ""
11	argCount = arg()
12	argOff = 0
13	if( calledAs \= "COMMAND" )then do
14	if argCount >= 1 then do
15	parent = arg(1)
16	argCount = argCount - 1
17	argOff = 1
18	end
19	InitArgs.0 = argCount
20	if( argCount > 0 )then do i = 1 to argCount
21	InitArgs.i = arg( i + argOff )
22	end
23	end; else do
24	call VROptions 'ImplicitNames'
25	call VROptions 'NoEchoQuit'
26	argCount = _ParseParams( arg(1) )
27	end
28	drop calledAs argCount argOff
29
30	/* Load the windows
31	*/
32	call VRInit
33	parse source . . spec
34	_VREPrimaryWindowPath = ,
35	VRParseFileName( spec, "dpn" ) \|\| ".VRW"
36	_VREPrimaryWindow = ,
37	VRLoad( parent, _VREPrimaryWindowPath )
38	drop parent spec
39	if( _VREPrimaryWindow == "" )then do
40	call VRMessage "", "Cannot load window:" VRError(), ,
41	"Error!"
42	_VREReturnValue = 32000
43	signal _VRELeaveMain
44	end
45
46	/* Process events
47	*/
48	call Init
49	signal on halt
50	do while( \ VRGet( _VREPrimaryWindow, "Shutdown" ) )
51	_VREEvent = VREvent()
52	interpret _VREEvent
53	end
54	_VREHalt:
55	_VREReturnValue = Fini()
56	call VRDestroy _VREPrimaryWindow
57	_VRELeaveMain:
58	call VRFini
59	exit _VREReturnValue
60
61	VRLoadSecondary:
62	__vrlsWait = abbrev( 'WAIT', translate(arg(2)), 1 )
63	if __vrlsWait then do
64	call VRFlush
65	end
66	__vrlsHWnd = VRLoad( VRWindow(), VRWindowPath(), arg(1) )
67	if __vrlsHWnd = '' then signal __vrlsDone
68	if __vrlsWait \= 1 then signal __vrlsDone
69	call VRSet __vrlsHWnd, 'WindowMode', 'Modal'
70	__vrlsTmp = __vrlsWindows.0
71	if( DataType(__vrlsTmp) \= 'NUM' ) then do
72	__vrlsTmp = 1
73	end
74	else do
75	__vrlsTmp = __vrlsTmp + 1
76	end
77	__vrlsWindows.__vrlsTmp = VRWindow( __vrlsHWnd )
78	__vrlsWindows.0 = __vrlsTmp
79	do while( VRIsValidObject( VRWindow() ) = 1 )
80	__vrlsEvent = VREvent()
81	interpret __vrlsEvent
82	end
83	__vrlsTmp = __vrlsWindows.0
84	__vrlsWindows.0 = __vrlsTmp - 1
85	call VRWindow __vrlsWindows.__vrlsTmp
86	__vrlsHWnd = ''
87	__vrlsDone:
88	return __vrlsHWnd
89
90	/*:VRX __NoValue
91	*/
92	__NoValue:
93	SAY FORMAT( sigl, 6 ) '+++' SOURCELINE( sigl )
94	SAY FORMAT( sigl, 6 ) '+++ Uninitialized variable'
95	EXIT sigl
96
97	/*:VRX __VXREXX____APPENDS__
98	*/
99	__VXREXX____APPENDS__:
100	/*
101	#append ..\..\Shared\PrintUtl.VRS
102	*/
103	return
104	/*:VRX _ParseParams
105	*/
106	_ParseParams: PROCEDURE EXPOSE InitArgs.
107	/* Parse program parameters when they are provided as a single string,
108	* including handling quotes.
109	*/
110
111	parse arg thisArgs
112
113	InitArgs. = ''
114	InitArgs.0 = 0
115
116	do while thisargs <> ''
117
118	parse value strip( thisArgs, "B" ) with curArg thisArgs
119
120	parse var curArg tc1 +1 .
121	if tc1 = '"' \| tc1 = "'" then
122	parse value curArg thisArgs with (tc1) curArg (tc1) ThisArgs
123
124	i = InitArgs.0 + 1
125	InitArgs.i = strip( curArg )
126	InitArgs.0 = i
127
128	end /* do while thisArgs <> '' */
129
130	RETURN InitArgs.0
131
132	/*:VRX CheckPrograms
133	*/
134	CheckPrograms: PROCEDURE EXPOSE globals.
135
136	/* Make sure CUPS.PDR is installed.
137	*/
138	cups_pdr = VRGetIni('PM_PORT_DRIVER', 'CUPS', 'System')
139	IF cups_pdr == '' THEN DO
140	cups_pdr = STREAM( globals.!bootdrv'\OS2\DLL\CUPS.PDR', 'C', 'QUERY EXISTS')
141	IF cups_pdr == '' THEN DO
142	CALL VRMessage VRWindow(),,
143	NLSGetMessage( 78, globals.!bootdrv'\OS2\DLL\CUPS.PDR'),, /* 78: The required program %1 is not installed... */
144	NLSGetMessage( 79 ), 'E' /* 79: Missing File */
145	CALL Quit
146	END
147	ELSE CALL VRSetIni('PM_PORT_DRIVER', 'CUPS', cups_pdr, 'System')
148	END
149
150	/* Make sure \TCPIP\BIN\CUPSLPR.EXE (required by CUPS.PDR) is installed.
151	*/
152	tcpipbin = SysSearchPath('PATH', 'inetd.exe')
153	IF tcpipbin <> '' THEN
154	tcpipbin = VRParseFileName( tcpipbin, 'DP')
155	ELSE
156	tcpipbin = globals.!bootdrv'\TCPIP\BIN'
157	IF \VRFileExists( tcpipbin'\cupslpr.exe') & (SysSearchPath('PATH', 'cupslpr.exe') == '') THEN DO
158	CALL VRMessage VRWindow(),,
159	NLSGetMessage( 78, 'CUPSLPR.EXE'),,
160	NLSGetMessage( 79 ), 'E'
161	CALL Quit
162	END
163
164	/* Make sure GZIP.EXE is installed (required for unpacking PPDs).
165	*/
166	gzip_exe = SysSearchPath('PATH', 'gzip.exe')
167	IF gzip_exe == '' THEN gzip_exe = STREAM( DIRECTORY() \|\| '\gzip.exe', 'C', 'QUERY EXISTS')
168	IF gzip_exe == '' THEN DO
169	CALL VRMessage VRWindow(), NLSGetMessage( 78, 'GZIP.EXE'), NLSGetMessage( 79 ), 'E'
170	CALL Quit
171	END
172
173	/* Make sure CUPSPORT.EXE is installed.
174	*/
175	port_exe = SysSearchPath('PATH', 'cupsport.exe')
176	IF port_exe == '' THEN port_exe = STREAM( DIRECTORY() \|\| '\cupsport.exe', 'C', 'QUERY EXISTS')
177	IF port_exe == '' THEN DO
178	CALL VRMessage VRWindow(), NLSGetMessage( 78, 'CUPSPORT.EXE'), NLSGetMessage( 79 ), 'E'
179	CALL Quit
180	END
181
182	/* Make sure PRNTOBJ.EXE is installed.
183	*/
184	prntobj_exe = SysSearchPath('PATH', 'prntobj.exe')
185	IF prntobj_exe == '' THEN prntobj_exe = STREAM( DIRECTORY() \|\| '\prntobj.exe', 'C', 'QUERY EXISTS')
186	IF prntobj_exe == '' THEN DO
187	CALL VRMessage VRWindow(), NLSGetMessage( 78, 'PRNTOBJ.EXE'), NLSGetMessage( 79 ), 'E'
188	CALL Quit
189	END
190
191	RETURN
192
193	/*:VRX CHK_CREATEPM_Click
194	*/
195	CHK_CREATEPM_Click: PROCEDURE
196	set = VRGet( "CHK_CREATEPM", "Set" )
197	CALL VRSet 'DT_PRESDRV', 'Enabled', set
198	CALL VRSet 'DDCB_PRESDRV', 'Enabled', set
199	RETURN
200
201	/*:VRX ConfirmAndCreate
202	*/
203	ConfirmAndCreate: PROCEDURE EXPOSE globals.
204
205	globals.!create = 0
206	CALL VRLoadSecondary 'SW_CREATE', 'W'
207	IF globals.!create <> 1 THEN RETURN
208
209	CALL SetPage4
210	CALL VRSet 'WN_MAIN', 'Pointer', 'WAIT'
211	CALL NLSSetText 'DT_INFO', 'Caption', 50 /* 50: Creating printer... */
212	ok = CreatePrinter( globals.!os2printer )
213
214	CALL VRSet 'DT_INFO', 'Caption', ''
215	CALL VRSet 'WN_MAIN', 'Pointer', '<default>'
216
217	IF ok <> 0 THEN DO
218	SELECT
219	WHEN ok == 1 THEN reason = NLSGetMessage( 70 ) /* 70: Error importing PPD file. */
220	WHEN ok == 2 THEN reason = NLSGetMessage( 71, globals.!log1 ) /* 71: Error creating CUPS printer. See %1 for more information. */
221	WHEN ok == 3 THEN reason = NLSGetMessage( 72, globals.!log1 ) /* 72: Error creating printer object. See %1 for more information. */
222	OTHERWISE reason = NLSGetMessage( 73) /* 73: Unknown error. */
223	END
224	CALL VRMessage VRWindow(), NLSGetMessage( 60 ) \|\|, /* 60: The following error occurred when trying to create the printer: */
225	'0d0a0d0a'x \|\| reason, NLSGetMessage( 56 ), 'E' /* 56: Error Creating Printer */
226	CALL NLSSetText 'DT_INFO', 'Caption', 52 /* 52: The printer could not be created. */
227	CALL NLSSetText 'PB_NEXT', 'Caption', 54 /* 54: Return */
228	END
229	ELSE DO
230	CALL NLSSetText 'DT_INFO', 'Caption', 51 /* 51: The printer has been created. */
231	CALL NLSSetText 'PB_NEXT', 'Caption', 53 /* 53: Create another */
232	END
233	CALL NLSSetText 'PB_CANCEL', 'Caption', 55 /* 55: Close */
234
235	CALL LINEOUT globals.!log1, ''
236	CALL LINEOUT globals.!log1
237
238	RETURN
239
240	/*:VRX CreateCupsPrinter
241	*/
242	CreateCupsPrinter: PROCEDURE EXPOSE globals.
243
244	od = DIRECTORY()
245	CALL DIRECTORY globals.!cupsdir'\sbin'
246	cups_cmd = 'lpadmin -p' globals.!prt_name '-E'
247	IF globals.!prt_info <> '' THEN
248	cups_cmd = cups_cmd '-D "'globals.!prt_info'"'
249	IF globals.!prt_loc <> '' THEN
250	cups_cmd = cups_cmd '-L "'globals.!prt_loc'"'
251	IF globals.!prt_dev <> '' THEN
252	cups_cmd = cups_cmd '-v "'globals.!prt_port'" -m' globals.!prt_dev
253	ELSE IF globals.!mode == 2 THEN
254	cups_cmd = cups_cmd '-v "'globals.!prt_port'" -P "'globals.!prt_ppd'"'
255	ELSE DO
256	PARSE VAR globals.!prt_ppd (globals.!cupsdir)'\share\cups\model\' model
257	IF model == '' THEN model = globals.!prt_ppd
258	cups_cmd = cups_cmd '-v "'globals.!prt_port'" -m "'model'"'
259	END
260
261	/* Temporary until we can offer user configuration:
262	*/
263	PARSE UPPER VALUE VALUE('LANG',,'OS2ENVIRONMENT') WITH 1 . 4 _ctry 6 .
264	IF ( WORDPOS( _ctry, 'US CA MX BO CO VE PH CL') > 0 ) THEN
265	page = 'Letter'
266	ELSE
267	page = 'A4'
268	cups_cmd = cups_cmd '-o media='page
269
270	CALL LINEOUT globals.!log1, 'Creating CUPS printer using:'
271	CALL LINEOUT globals.!log1, ' ' cups_cmd
272	IF VRFileExists( globals.!log2 ) THEN DO
273	CALL LINEOUT globals.!log2, ''
274	CALL LINEOUT globals.!log2
275	END
276	ADDRESS CMD '@' cups_cmd '1>NUL 2>>' globals.!log2
277	CALL LINEOUT globals.!log1, 'Return code: 0x' \|\| D2X( rc, 4 )
278	IF rc <> 0 THEN
279	CALL LINEOUT globals.!log1, 'See' globals.!log2 'for details.'
280	CALL DIRECTORY od
281	CALL LINEOUT globals.!log1, ''
282
283	RETURN rc
284
285	/*:VRX CreateOS2Printer
286	*/
287	/* Creates an OS/2 printer port, queue, and desktop object which point to
288	* the just-created CUPS printer. Uses the RINSTPRN utility from IBM.
289	*/
290	CreateOS2Printer: PROCEDURE EXPOSE globals.
291	ARG prnt_drv
292
293	IF globals.!remotecups == '' THEN DO
294	host = LoopbackName()
295	printer = globals.!prt_name
296	END
297	ELSE
298	PARSE VAR globals.!remotecups host printer .
299
300	printer_title = globals.!prt_info
301	printer_model = globals.!prt_nick
302	queue_name = GetQueueName( printer_title )
303	port_name = GetNextPortName('CUPS')
304
305	/* Determine the printer driver source directories/files. Yes, this is
306	* repeated from ImportPPD, but we have to do it again here because
307	* (a) we might not have gone through ImportPPD to get to this point, and
308	* (b) even if we did, the repository information might have changed.
309	*/
310	driver_path = GetDriverSource( prnt_drv )
311	IF driver_path == '' THEN
312	/* Driver was not found in the repository. Check for a previously-
313	* installed copy under \OS2\DLL.
314	*/
315	driver_path = STREAM( globals.!os2dir'\DLL\'prnt_drv'\'prnt_drv'.DRV', 'C', 'QUERY EXISTS')
316
317	IF driver_path == '' THEN DO
318	/* TODO allow the user to browse for the driver on their system */
319	CALL VRMessage VRWindow(),,
320	NLSGetMessage( 61, prnt_drv, globals.!os2dir'\DLL\'prnt_drv ),, /* 61: The printer driver %1 could not be located. If you have the driver files, please copy them to the directory %2 and then try again. */
321	NLSGetMessage( 57 ), 'E' /* 57: Driver Not Found */
322	RETURN 1
323	END
324
325	/* Create a new CUPS port.
326	*/
327	port_ok = AddPort_CUPS( port_name, host, printer )
328	IF port_ok > 1 THEN
329	RETURN 1
330
331	/* New logic to create the printer ourselves (instead of using RINSTPRN).
332	* There are two necessary steps: make sure the driver is installed, and
333	* then create the printer object (which causes the underlying device and
334	* queue to be created automatically as well).
335	*/
336
337	ok = InstallPrintDriver( prnt_drv, driver_path, printer_model )
338	CALL LINEOUT globals.!log1, 'InstallPrintDriver(' prnt_drv',' driver_path',' printer_model ') RC =' ok
339
340	IF ok == 0 THEN DO
341	ok = CreatePrinterObject( prnt_drv, printer_model,,
342	port_name, queue_name, printer_title )
343	CALL LINEOUT globals.!log1, 'CreatePrinterObject(' prnt_drv',' printer_model,
344	',' port_name',' queue_name',' printer_title ') RC =' ok
345	IF ok <> 0 THEN DO
346	CALL LINEOUT globals.!log1, 'Failed to create printer object; trying again with generic driver.'
347	ok = CreatePrinterObject( prnt_drv, 'Generic Postscript Printer',,
348	port_name, queue_name, printer_title )
349	CALL LINEOUT globals.!log1, 'CreatePrinterObject(' prnt_drv', Generic Postscript Printer',
350	',' port_name',' queue_name',' printer_title ') RC =' ok
351	END
352	END
353
354	IF ok <> 0 THEN DO
355	CALL LINEOUT globals.!log1, 'Printer object creation failed.'
356	IF SysIni('SYSTEM', 'PM_SPOOLER_PRINTER', 'ALL:', 'prt_keys.') == '' THEN DO
357	DO i = 1 TO prt_keys.0
358	key_val = SysIni('SYSTEM', 'PM_SPOOLER_PRINTER', prt_keys.0 )
359	PARSE VAR key_val _kport ';' _ktitle ';' .
360	IF ( _kport == port_name ) & ( _ktitle == printer_title ) THEN DO
361	CALL LINEOUT globals.!log1, 'Cleaning INI entry:' prt_keys.0 '=' key_val
362	CALL SysIni 'SYSTEM', 'PM_SPOOLER_PRINTER_DESCR', prt_keys.0, 'DELETE:'
363	CALL LINEOUT globals.!log1, 'Cleaning INI entry:' prt_keys.0 '=' key_val
364	CALL SysIni 'SYSTEM', 'PM_SPOOLER_PRINTER', prt_keys.0, 'DELETE:'
365	LEAVE
366	END
367	END
368	END
369	CALL LINEOUT globals.!log1, 'Deleting port' port_name
370	CALL DeletePort port_name
371	END
372	ELSE IF port_ok == 1 THEN DO
373	CALL VRMessage VRWindow(),,
374	NLSGetMessage( 62 ),, /* 62: The installed version of CUPS.PDR appears to be out of date. As a result, the desktop printer will not be usable until the desktop is restarted. */
375	NLSGetMessage( 58 ), 'W' /* 58: Port Driver Problem */
376	END
377
378	RETURN ok
379
380	/*:VRX CreatePrinter
381	*/
382	CreatePrinter: PROCEDURE EXPOSE globals.
383	ARG create_os2
384
385	/* Create the CUPS printer */
386	IF globals.!remotecups == '' THEN DO
387	ok = CreateCupsPrinter()
388	IF ok <> 0 THEN
389	RETURN 2 / RC=2 Error running lpadmin /
390	END
391
392	/* Now create the OS/2 printer object */
393	IF create_os2 == 1 & globals.!os2driver <> '' THEN DO
394
395	/* Make sure the presentation driver supports the printer */
396	IF globals.!mode == 2 THEN DO
397	/* Always (re)import when a PPD is provided by the user
398	*/
399	ok = ImportPPD( globals.!os2driver, globals.!prt_ppd )
400	IF ok <> 0 THEN DO
401	CALL LINEOUT globals.!log1, 'PPD import failed:' ok
402	buttons.1 = NLSGetMessage( 2 ) /* 2: OK */
403	buttons.2 = NLSGetMessage( 3 ) /* 3: Cancel */
404	buttons.0 = 2
405	ok = VRMessage( VRWindow(), NLSGetMessage( 69 ),, /* 69: The printer parameters could not ... PPD file. */
406	NLSGetMessage( 70 ), 'W',, /* 70: Error importing PPD file */
407	'buttons.', 1, 2 )
408	IF ok == 1 THEN
409	CALL PromptForPMName
410	ELSE
411	RETURN 1 /* RC=1 PPD import failed **/
412	END
413	END
414	ELSE IF PrinterExistsInDRV( globals.!os2driver, globals.!prt_nick ) == 0 THEN DO
415	cups_ppd = globals.!prt_ppd
416	IF cups_ppd == '' THEN
417	cups_ppd = STREAM( globals.!cupsdir'\etc\cups\ppd\'globals.!prt_name'.ppd', 'C', 'QUERY EXISTS')
418	IF cups_ppd == '' THEN
419	CALL PromptForPMName
420	ELSE DO
421	ok = ImportPPD(globals.!os2driver, cups_ppd )
422	IF ok <> 0 THEN DO
423	CALL LINEOUT globals.!log1, 'PPD import failed:' ok
424	CALL VRMessage VRWindow(), NLSGetMessage( 69 ), NLSGetMessage( 70 ), 'W'
425	CALL PromptForPMName
426	/* RETURN 1 RC=1 PPD import failed **/
427	END
428	END
429	END
430
431	ok = CreateOS2Printer( globals.!os2driver )
432	IF ok <> 0 THEN
433	RETURN 3 / RC=3 Error running rinstprn /
434	END
435
436	RETURN 0
437
438	/*:VRX DDCB_PROTOCOL_Change
439	*/
440	DDCB_PROTOCOL_Change: PROCEDURE EXPOSE globals.
441
442	idx = VRGet('DDCB_PROTOCOL', 'Selected')
443	which = VRMethod('DDCB_PROTOCOL', 'GetItemData', idx )
444	SELECT
445	WHEN which == 1 THEN DO /* IPP */
446	show_queue = 1
447	show_user = 1
448	show_pass = 1
449	show_pick = 0
450	server_caption = 82 /* 82: Printer or server address: */
451	queue_caption = 84 /* 84: Printer queue name: */
452	userid_caption = 86 /* 86: User ID: */
453	END
454	WHEN which == 2 THEN DO /* SOCKET */
455	show_queue = 0
456	show_user = 0
457	show_pass = 0
458	show_pick = 0
459	server_caption = 82 /* 82: Printer or server address: */
460	queue_caption = 84 /* 84: Printer queue name: */
461	userid_caption = 86 /* 86: User ID: */
462	END
463	WHEN which == 3 THEN DO /* LPD */
464	show_queue = 1
465	show_user = 1
466	show_pass = 0
467	show_pick = 0
468	server_caption = 82 /* 82: Printer or server address: */
469	queue_caption = 84 /* 84: Printer queue name: */
470	userid_caption = 87 /* 87: User ID (if required): */
471	END
472	WHEN which == 4 THEN DO /* SMB */
473	show_queue = 1
474	show_user = 1
475	show_pass = 1
476	show_pick = 0
477	server_caption = 83 /* 83: Print server name: */
478	queue_caption = 85 /* 85: Shared printer name: */
479	userid_caption = 86 /* 86: User ID: */
480	END
481	OTHERWISE DO /* CUPS */
482	show_queue = 0
483	show_user = 0
484	show_pass = 0
485	show_pick = 1
486	server_caption = 88 /* 88: CUPS server name: */
487	queue_caption = 89 /* 89: CUPS printer name: */
488	userid_caption = 86 /* 86: User ID: */
489	END
490	END
491
492	r = NLSSetText('DT_SERVER', 'Caption', server_caption )
493	r = NLSSetText('DT_QUEUE', 'Caption', queue_caption )
494	r = NLSSetText('DT_USERID', 'Caption', userid_caption )
495
496	CALL VRSet 'DT_QUEUE', 'Visible', show_queue \| show_pick
497	CALL VRSet 'EF_QUEUE', 'Visible', show_queue
498	CALL VRSet 'DT_USERID', 'Visible', show_user
499	CALL VRSet 'EF_USERID', 'Visible', show_user
500	CALL VRSet 'DT_PASSWORD', 'Visible', show_pass
501	CALL VRSet 'EF_PASSWORD', 'Visible', show_pass
502	CALL VRSet 'DDCB_CUPSQUEUES','Visible', show_pick
503
504	RETURN
505
506	/*:VRX EF_SERVER_LostFocus
507	*/
508	EF_SERVER_LostFocus: PROCEDURE EXPOSE globals. network_dialog
509
510	idx = VRGet('DDCB_PROTOCOL', 'Selected')
511	which = VRMethod('DDCB_PROTOCOL', 'GetItemData', idx )
512	IF which <> 5 THEN RETURN
513
514	CALL VRMethod 'DDCB_CUPSQUEUES', 'Clear'
515	server = STRIP( VRGet("EF_SERVER", "Value"))
516	IF server == '' THEN RETURN
517
518	IF GetCupsQueues( server ) == 0 THEN RETURN
519
520	/* Sanity check to make sure the dialog wasn't dismissed before lpstat returned */
521	IF network_dialog <> 1 THEN RETURN
522
523	CALL VRMethod 'DDCB_CUPSQUEUES', 'AddStringList', 'cupsdest.'
524	RETURN
525
526	/*:VRX ExecRINSTPRN
527	*/
528	ExecRINSTPRN: PROCEDURE EXPOSE globals.
529	PARSE ARG dsc, drv, src, rsp
530
531	od = DIRECTORY()
532	CALL DIRECTORY src
533	rinstprn_cmd = 'rinstprn /DSC:'dsc '/DRV:'drv' /S:'src ,
534	'/T:'globals.!bootdrv '/L1:'globals.!logdir'\rinstprn.log' ,
535	'/R:'rsp
536
537	CALL LINEOUT globals.!log1, 'Creating OS/2 printer using:'
538	CALL LINEOUT globals.!log1, ' ' rinstprn_cmd
539	ADDRESS CMD '@' rinstprn_cmd '1>NUL 2>NUL'
540	CALL LINEOUT globals.!log1, 'Return code: 0x' \|\| D2X( rc, 4 )
541	IF rc <> 0 THEN
542	CALL LINEOUT globals.!log1, 'See' globals.!logdir'\rinstprn.log for details.'
543	CALL DIRECTORY od
544	CALL LINEOUT globals.!log1, ''
545
546	RETURN rc
547
548	/*:VRX Fini
549	*/
550	Fini:
551	window = VRWindow()
552	call VRSet window, "Visible", 0
553	drop window
554	return 0
555
556	/*:VRX GetCupsPorts
557	*/
558	GetCupsPorts: PROCEDURE EXPOSE globals.
559
560	CALL NLSSetText 'DT_INFO', 'Caption', 30 /* 30: Looking for connected printers. Please wait... */
561
562	lpinfo_cmd = globals.!cupsdir'\sbin\lpinfo.exe -v 2>&1 \|rxqueue'
563	snmp_cmd = globals.!cupsdir'\lib\cups\backend\snmp.exe 2>&1 \|rxqueue'
564
565	_od = DIRECTORY()
566	CALL DIRECTORY globals.!cupsdir
567	listqueue = RXQUEUE('CREATE')
568	defqueue = RXQUEUE('SET', listqueue )
569
570	/* Use the SNMP backend to find network printers. We do this in addition
571	* to lpinfo because SNMP may provide the actual printer name. We'll
572	* merge this with the output of lpinfo in the next step.
573	*/
574	ADDRESS CMD '@' snmp_cmd listqueue
575	DO QUEUED()
576	PARSE PULL line
577	PARSE VAR line _type _uri '"'_identifier'"' .
578	_uri = STRIP( _uri )
579	_type = STRIP( _type )
580	IF _uri == '' THEN ITERATE
581	IF _type <> 'network' THEN ITERATE
582	netnames._uri = _identifier
583	END
584
585	ADDRESS CMD '@' lpinfo_cmd listqueue
586	i = 0
587	DO QUEUED()
588	PARSE PULL line
589	PARSE VAR line _type _name
590	IF _name == '' THEN ITERATE
591	IF _type == 'network' & POS('://', _name ) > 0 THEN DO
592	PARSE VAR _name _protocol '://' _host '/' _queue
593	IF _protocol == 'socket' THEN _protocol = 'AppSocket'
594	ELSE _protocol = TRANSLATE( _protocol )
595	i = i + 1
596	IF _queue <> '' THEN _queue = '(queue '_queue')'
597	IF SYMBOL('netnames._name') == 'VAR' THEN
598	devices.i = NLSGetMessage( 32, _protocol, netnames._name, _host _queue ) /* 32: Detected network printer (%1) "%2" at %3 */
599	ELSE
600	devices.i = NLSGetMessage( 33, _protocol, _host _queue ) /* 33: Detected network printer (%1) at %2 */
601	END
602	ELSE IF _type <> 'direct' THEN ITERATE
603	ELSE DO
604	IF _name == 'hp' THEN ITERATE
605	i = i + 1
606	devices.i = NLSGetMessage( 35, _name ) /* 35: Local printer: %1 */
607	END
608	ports.i = _name
609	END
610	devices.0 = i
611
612	CALL RXQUEUE 'SET', defqueue
613	CALL RXQUEUE 'DELETE', listqueue
614	CALL DIRECTORY _od
615
616	CALL VRSet 'LB_SELECT', 'Painting', 0
617	CALL VRMethod 'LB_SELECT', 'AddStringList', 'devices.',, 'ports.'
618	CALL VRMethod 'LB_SELECT', 'AddString', NLSGetMessage( 34 ),, '' /* 34: Network printer (manual configuration) */
619	CALL VRSet 'LB_SELECT', 'Selected', 1
620	CALL VRSet 'LB_SELECT', 'Painting', 1
621
622	CALL VRSet 'DT_INFO', 'Caption', NLSGetMessage( 31 ) /* 31: Select the connection for this printer. */
623
624	RETURN
625
626	/*:VRX GetCupsPrinters
627	*/
628	GetCupsPrinters: PROCEDURE EXPOSE globals. manufacturers.
629
630	CALL NLSSetText 'DT_INFO', 'Caption', 20 /* 20: Getting list of supported printers. Please wait... */
631
632	lpinfo_cmd = globals.!cupsdir'\sbin\lpinfo.exe --exclude-schemes drv -m 2>&1 \|rxqueue'
633
634	_od = DIRECTORY()
635	CALL DIRECTORY globals.!cupsdir
636	listqueue = RXQUEUE('CREATE')
637	defqueue = RXQUEUE('SET', listqueue )
638
639	ADDRESS CMD '@' lpinfo_cmd listqueue
640	i = 0
641	makers = ''
642	DO QUEUED()
643	PARSE PULL line
644	IF LEFT( line, 6 ) == 'drv://' THEN ITERATE
645	IF WORD( line, 1 ) == 'raw' THEN ITERATE
646	PARSE VAR line _ppd '.ppd.gz ' _name
647	_ppd = _ppd'.ppd.gz'
648	IF _name == '' THEN DO
649	PARSE VAR line _ppd '.ppd ' _name
650	_ppd = _ppd'.ppd'
651	END
652	IF _name == '' THEN DO
653	PARSE VAR line _ppd _name
654	END
655	IF _name <> '' THEN DO
656	PARSE VAR _name _brand _model
657	IF WORDPOS( _brand, makers ) == 0 THEN makers = makers \|\| _brand' '
658	i = i + 1
659	ppds.i = _ppd
660	models.i = _name
661	END
662	END
663	ppds.0 = i
664	models.0 = i
665
666	CALL RXQUEUE 'SET', defqueue
667	CALL RXQUEUE 'DELETE', listqueue
668	CALL DIRECTORY _od
669
670	/* Now build the 'manufacturers' stem.
671	* This stem takes the following format:
672	* manufacturers.0 number of manufacturers
673	* manufacturers.i.!name manufacturer name (e.g. 'Apple')
674	* manufacturers.i.!printers.0 number of printer models
675	* manufacturers.i.!printers.j.!model printer model name, short form (e.g. 'LaserWriter 330')
676	* manufacturers.i.!printers.j.!type driver version/type (e.g. 'Gutenprint v5.2.7')
677	* manufacturers.i.!printers.j.!driver the internal CUPS printer driver name (PPD or URI)
678	* - by preference this is the "simplified" version if available
679	* manufacturers.i.!printers.j.!remark any distinguishing remarks (e.g. 'Simplified')
680	* manufacturers.i.!printers.j.!driver2 alternate driver in case there is more than one (PPD or URI)
681	* - if defined this is usually the non-"simplified" driver
682	* manufacturers.i.!printers.j.!remark2 any distinguishing remarks for the alternate driver
683	*/
684	manufacturers.0 = WORDS( makers )
685	DO i = 1 TO manufacturers.0
686	manufacturers.i.!name = WORD( makers, i )
687	manufacturers.i.!printers.0 = 0
688	END
689
690	DO i = 1 TO models.0
691	PARSE VAR models.i _brand _model ' - CUPS+' _type
692	IF _type == '' THEN DO
693	PARSE VAR models.i _brand _model ',' _type
694	IF WORD( _type, 1 ) == 'hpcups' THEN
695	_type = 'HPLIP' /* SUBWORD( _type, 2 ) */
696	ELSE IF ( _type == '') & ( LEFT( ppds.i, 3 ) == 'hp/') THEN
697	_type = 'HPLIP'
698	END
699	man = WORDPOS( _brand, makers )
700	IF man == 0 THEN ITERATE
701
702	PARSE VAR _type _version 'Simplified' .
703	_version = STRIP( _version )
704	_flag = RIGHT( _type, 10 )
705
706	count = manufacturers.man.!printers.0
707	IF count > 0 THEN DO
708	/* If there are two or more printers defined with the same model
709	* name and driver version, keep the first and last as the regular
710	* and alternate drivers; if one if them is 'Simplified', make that
711	* the regular driver by preference.
712	*/
713	IF ( TRANSLATE( manufacturers.man.!printers.count.!model ) == TRANSLATE( _model )) THEN DO
714	IF ( manufacturers.man.!printers.count.!type == _version ) THEN DO
715	IF ( WORD( _version, 1 ) == 'Gutenprint') & ( _flag == 'Simplified') THEN DO
716	manufacturers.man.!printers.count.!driver2 = manufacturers.man.!printers.count.!driver
717	manufacturers.man.!printers.count.!remark2 = manufacturers.man.!printers.count.!remark
718	manufacturers.man.!printers.count.!driver = ppds.i
719	manufacturers.man.!printers.count.!remark = 'Simplified'
720	END
721	ELSE DO
722	manufacturers.man.!printers.count.!driver2 = ppds.i
723	IF _flag == 'Simplified' THEN
724	manufacturers.man.!printers.count.!remark2 = 'Simplified'
725	ELSE
726	manufacturers.man.!printers.count.!remark2 = ''
727	END
728	ITERATE
729	END
730	END
731	END
732	count = count + 1
733	manufacturers.man.!printers.count.!model = _model
734	manufacturers.man.!printers.count.!type = _version
735	manufacturers.man.!printers.count.!driver = ppds.i
736	IF _flag == 'Simplified' THEN
737	manufacturers.man.!printers.count.!remark = 'Simplified'
738	ELSE
739	manufacturers.man.!printers.count.!remark = ''
740	manufacturers.man.!printers.count.!driver2 = ''
741	manufacturers.man.!printers.count.!remark2 = ''
742	manufacturers.man.!printers.0 = count
743	END
744
745	/* Add one more category for special items ...
746	*/
747	count = manufacturers.0 + 1
748	manufacturers.count.!name = NLSGetMessage( 22 ) /* 22: -- Custom -- */
749	manufacturers.count.!printers.0 = 1
750	manufacturers.count.!printers.1.!model = NLSGetMessage( 23 ) /* 23: -- Other printer (requires PPD) -- */
751	manufacturers.count.!printers.1.!driver = ''
752	manufacturers.count.!printers.1.!type = ''
753	manufacturers.count.!printers.1.!remark = manufacturers.count.!printers.1.!model
754	manufacturers.count.!printers.1.!driver2 = ''
755	manufacturers.count.!printers.1.!remark2 = ''
756	manufacturers.0 = count
757
758	RETURN
759
760	/*:VRX GetCupsQueues
761	*/
762	GetCupsQueues: PROCEDURE EXPOSE globals. cupsdest.
763	ARG hostaddr
764
765	/* Try to find lpstat.exe */
766	lpstat_exe = STREAM( globals.!cupsdir'\bin\lpstat.exe', 'C', 'QUERY EXISTS')
767	IF lpstat_exe == '' THEN lpstat_exe = STREAM( globals.!mydir'\lpstat.exe', 'C', 'QUERY EXISTS')
768	IF lpstat_exe == '' THEN lpstat_exe = STREAM( DIRECTORY()'\lpstat.exe', 'C', 'QUERY EXISTS')
769	IF lpstat_exe == '' THEN lpstat_exe = SysSearchPath('PATH', 'lpstat.exe')
770	IF lpstat_exe == '' THEN RETURN 0
771
772	sq = RXQUEUE('CREATE')
773	oq = RXQUEUE('SET', sq )
774
775	CALL VRSet VRWindow(), 'Pointer', 'WAIT'
776	ADDRESS CMD '@'lpstat_exe '-h' hostaddr '-p -c 2>&1 \|rxqueue' sq
777	CALL VRSet VRWindow(), 'Pointer', '<default>'
778
779	_count = 0
780	DO QUEUED()
781	PARSE PULL _info
782	IF _info == '' THEN ITERATE
783	IF _info == 'lpstat: Connection refused' THEN LEAVE
784	IF WORD( _info, 1 ) == 'printer' THEN
785	PARSE VAR _info 'printer' _qname .
786	ELSE IF WORD( info, 1 ) == 'class' THEN
787	PARSE VAR _info 'class' _qname .
788	ELSE ITERATE
789	IF _qname == '' THEN ITERATE
790	_count = _count + 1
791	cupsdest._count = _qname
792	END
793	CALL RXQUEUE 'DELETE', sq
794	CALL RXQUEUE 'SET', oq
795
796	cupsdest.0 = _count
797
798	RETURN _count
799
800	/*:VRX Halt
801	*/
802	Halt:
803	signal _VREHalt
804	return
805
806	/*:VRX ImportPPD
807	*/
808	ImportPPD: PROCEDURE EXPOSE globals.
809	/* Import a new PPD file into a PostScript driver.
810	*/
811	ARG driver, ppdfile
812	IF driver == '' THEN driver = 'PSCRIPT'
813
814	CALL LINEOUT globals.!log1, 'Going to import PPD file into driver' driver'.'
815
816	/***
817	*** First, get our working directories and locate the driver source files.
818	***/
819
820	mustcopy = 0
821	driver_path = GetDriverSource( driver )
822	IF driver_path == '' THEN DO
823	/* No source found. We'll have to try copying the actual installed
824	* driver files from under \OS2\DLL.
825	*/
826	CALL LINEOUT globals.!log1, 'Driver source not found.'
827	driver_path = STREAM( globals.!os2dir'\DLL\'driver'\'driver'.DRV', 'C', 'QUERY EXISTS')
828	mustcopy = 1
829	END
830	IF driver_path <> '' THEN DO
831	srcdir = VRParseFilePath( driver_path, 'DP')
832	pin = STREAM( srcdir'\PIN.EXE', 'C', 'QUERY EXISTS')
833	ppdenc = STREAM( srcdir'\PPDENC.EXE', 'C', 'QUERY EXISTS')
834	/* TODO should we check for all the REQUIREDDRIVER FILES as well? */
835	DROP srcdir
836	END
837
838	/* Driver (or one of its required files) was not found.
839	*/
840	IF ( driver_path == '') \| ( pin == '') \| ( ppdenc == '') \| ,
841	( VerifyDriverEAs( driver_path ) == 0 ) THEN
842	DO
843	CALL LINEOUT globals.!log1, ' - Missing required driver files.'
844	/* TODO should prompt for installable driver package? */
845	RETURN 1 / RC=1 Missing required driver files /
846	END
847
848	IF mustcopy <> 0 THEN DO
849	/* Looks like the driver wasn't shipped with the OS; we have a source
850	* (either the active files from \OS2\DLL, or a package provided by
851	* the user), but we need somewhere for them to live. The user needs
852	* to tell us where, because they're going to have to specify the
853	* directory later on if they install the driver from PM.
854	*/
855	pbtn.1 = NLSGetMessage( 2 ) /* 2: OK */
856	pbtn.2 = NLSGetMessage( 3 ) /* 3: Cancel */
857	pbtn.0 = 2
858	ptext = NLSGetMessage( 63, driver ) \|\|, /* 63: The install files for the %1 driver could not be located. These files will be recreated from the driver files which are already installed on your system. */
859	'0d0a0d0a'x \|\| NLSGetMessage( 64 ) /* 64: Please enter the directory where the install files will be placed. */
860
861	PARSE VALUE VRGetIni('PM_INSTALL', driver'_DIR', 'USER') WITH drvr_dir '00'x .
862	IF drvr_dir == '' THEN
863	PARSE VALUE VRGetIni('InstPDR', 'PATH_TO_'driver, 'USER') WITH drvr_dir '00'x .
864	ok = VRPrompt('WN_MAIN', ptext, 'drvr_dir', NLSGetMessage( 59 ), 'pbtn.', 1, 2 ) /* 59: Enter Directory */
865	IF ok <> 1 THEN RETURN 9 / RC=9 User cancelled /
866	drvr_dir = VRExpandFileName( drvr_dir )
867	DO WHILE drvr_dir == ''
868	ok = VRPrompt('WN_MAIN', ptext, 'drvr_dir',,
869	'Enter Directory', 'pbtn.', 1, 2 )
870	drvr_dir = VRExpandFileName( drvr_dir )
871	END
872
873	/* Now create the new directory, if necessary */
874	IF VRMkDir( drvr_dir ) == 0 THEN
875	RETURN 3 / RC=3 Failed to copy driver files /
876	IF CopyDriverToSource( driver_path, drvr_dir ) == 0 THEN
877	RETURN 3 / RC=3 Failed to copy driver files /
878
879	/* Make sure we save the location (we'll need this information later) */
880	CALL VRSetIni 'PM_INSTALL', driver'_DIR', drvr_dir\|\|'00'x, 'USER'
881
882	/* Now point to the new copy as the driver we will work on */
883	driver_path = drvr_dir'\'driver'.DRV'
884	END
885
886	workdir = SysTempFileName( globals.!tmpdir'\PPD_????')
887	ok = VrMkDir( workdir )
888	IF ok == 1 THEN ok = VrMkDir( workdir'\OUT')
889	IF ok <> 1 THEN
890	RETURN 2 / RC=2 Failed to create temporary directory /
891
892	SELECT
893	WHEN driver == 'ECUPS' THEN ppddir = globals.!repository'\PPD_E'
894	WHEN driver == 'ECUPS-HP' THEN ppddir = globals.!repository'\PPD_EHP'
895	WHEN driver == 'PSPRINT' THEN ppddir = globals.!repository'\PPD_PS'
896	WHEN driver == 'PSPRINT2' THEN ppddir = globals.!repository'\PPD_PS2'
897	WHEN driver == 'PSCRIPT2' THEN ppddir = globals.!repository'\PPD2'
898	OTHERWISE ppddir = globals.!repository'\PPD'
899	END
900
901	/* Make sure ppddir (for keeping PPD files) exists */
902	CALL SysFileTree ppddir, 'dirs.', 'DO'
903	IF dirs.0 == 0 THEN DO
904	ok = VrMkDir( ppddir )
905	IF ok <> 1 THEN
906	RETURN 4 / RC=4 Failed to create PPD directory /
907	END
908
909	/***
910	*** Now do the actual work.
911	***/
912
913	/* Back up the modified files (AUXPRINT.PAK and <driver>.DRV) if we're
914	* working out of the repository.
915	IF mustcopy == 0 THEN DO
916	repfiles.0 = 2
917	repfiles.1 = driver'.DRV'
918	repfiles.2 = 'AUXPRINT.PAK'
919	CALL BackupDrivers driver_path
920	END
921	*/
922
923	/* Copy the needed driver files to our working directories.
924	*/
925	drv_out = workdir'\OUT\'driver'.DRV'
926	pin_exe = workdir'\PIN.EXE'
927	ppd_exe = workdir'\PPDENC.EXE'
928	ok = VRCopyFile( driver_path, drv_out )
929	IF ok == 1 THEN ok = VRCopyFile( pin, pin_exe )
930	IF ok == 1 THEN ok = VRCopyFile( ppdenc, ppd_exe )
931	IF ok == 0 THEN DO
932	RETURN 3 /* RC=3 Failed to copy driver files */
933	END
934
935	/* Set up the output redirection.
936	*/
937	nq = RXQUEUE('CREATE')
938	oq = RXQUEUE('SET', nq )
939
940	/* If the PPD file is compressed, uncompress it.
941	*/
942	IF VRParseFilePath( ppdfile, 'E') == 'GZ' THEN DO
943	decppd = workdir'\' \|\| VRParseFilePath( ppdfile, 'N')
944	CALL LINEOUT globals.!log1, 'Decompressing' ppdfile 'to' decppd
945	ADDRESS CMD '@gzip -c -d' ppdfile '\| RXQUEUE' nq
946	DO QUEUED()
947	PARSE PULL line
948	CALL LINEOUT decppd, line
949	END
950	CALL LINEOUT decppd
951	ppdfile = decppd
952	END
953
954	IF VRFileExists( ppdfile ) == 0 THEN DO
955	CALL LINEOUT globals.!log1, 'PPD file' ppdfile 'could not be found.'
956	RETURN 5 / RC=5 PPD import failed /
957	END
958
959	ppd_use = ppddir'\' \|\| VRParseFileName( ppdfile, 'NE')
960
961	/* Now we have to clean up and validate the PPD file so PIN can use it.
962	* First, PPDENC converts the codepage if necessary, and copies the results
963	* to our working directory.
964	*/
965	CALL LINEOUT globals.!log1, 'Converting PPD with:' ppd_exe ppdfile ppd_use
966	ADDRESS CMD '@'ppd_exe ppdfile ppd_use '2>NUL \| RXQUEUE' nq
967	DO QUEUED()
968	PULL output
969	CALL LINEOUT globals.!log2, output
970	END
971	CALL LINEOUT globals.!log2, ''
972	CALL LINEOUT globals.!log2
973
974	IF VRFileExists( ppd_use ) == 0 THEN DO
975	CALL LINEOUT globals.!log1, 'Hmm,' ppd_use 'was not created. Copying manually.'
976	CALL VRCopyFile ppdfile, ppd_use
977	END
978
979	/* Next we strip out some problematic lines used which are often encountered
980	* in (e.g.) CUPS-based PPD files.
981	*/
982	CALL CleanPPD ppd_use, globals.!log1
983
984	/* Preparation complete. Now do the import.
985	*/
986	count = 0
987	ADDRESS CMD '@'pin_exe 'ppd' ppddir drv_out '2>NUL \| RXQUEUE' nq
988	DO QUEUED()
989	PARSE PULL output
990	CALL LINEOUT globals.!log2, output
991	PARSE VAR output . 'OK (' nickname
992	IF nickname <> '' THEN DO
993	count = count + 1
994	newprinters.count = STRIP( nickname, 'T', ')')
995	END
996	END
997	newprinters.0 = count
998	CALL LINEOUT globals.!log2, ''
999	CALL LINEOUT globals.!log2
1000
1001	/* End the output redirection.
1002	*/
1003	CALL RXQUEUE 'SET', oq
1004	CALL RXQUEUE 'DELETE', nq
1005
1006
1007	/***
1008	*** Post-import processing.
1009	***/
1010
1011	IF newprinters.0 == 0 THEN DO
1012	RETURN 5 / RC=5 PPD import failed /
1013	END
1014
1015	/IF mustcopy == 0 THEN DO/
1016	IF pmdx <> '' THEN DO
1017	/* If we're working out of the repository, we need to update the
1018	* driver table in PRDESC.LST to add the new driver(s).
1019	*/
1020
1021	CALL LINEOUT globals.!log1, 'Updating' globals.!prdesc 'with' newprinters.0 'new entries ...'
1022	count = 0
1023	match_drv = '('driver'.DRV)'
1024	match_len = LENGTH( match_drv )
1025
1026	/* First, copy all lines that don't refer to the driver just updated */
1027	DO WHILE LINES( globals.!prdesc )
1028	_line = LINEIN( globals.!prdesc )
1029	IF TRANSLATE( RIGHT( _line, LENGTH( match_len ))) == match_drv THEN ITERATE
1030	count = count + 1
1031	defs.count = _line
1032	END
1033	CALL STREAM globals.!prdesc, 'C', 'CLOSE'
1034
1035	/* Next, create a new list for the updated driver and merge that in */
1036	newlist = workdir'\'driver'.LST'
1037	CALL CreateDriverList driver, newlist
1038	DO WHILE LINES( newlist )
1039	_line = LINEIN( newlist )
1040	count = count + 1
1041	defs.count = _line
1042	END
1043	defs.0 = count
1044
1045	/* Now sort the list and recreate PRDESC.LST */
1046	CALL SysStemSort 'defs.',, 'I'
1047	prdesc_tmp = workdir'\PRDESC.LST'
1048	IF STREAM( prdesc_tmp, 'C', 'QUERY EXISTS') <> '' THEN
1049	CALL VRDeleteFile prdesc_tmp
1050	DO i = 1 TO defs.0
1051	CALL LINEOUT prdesc_tmp, defs.i
1052	END
1053	CALL LINEOUT prdesc_tmp
1054	ok = VRCopyFile( prdesc_tmp, globals.!prdesc )
1055	IF ok == 0 THEN DO
1056	RETURN 6 / RC=6 Error updating PRDESC.LST /
1057	END
1058	CALL VRDeleteFile prdesc_tmp
1059
1060	END
1061
1062	/* Finally, copy the updated driver files.
1063	*/
1064	target = VRParseFilePath( driver_path, 'DP')
1065	CALL LINEOUT globals.!log1, 'Copying files from' workdir'\OUT to' target
1066	ADDRESS CMD '@UNLOCK' target'\'driver'.DRV 2>NUL 1>NUL'
1067	ok = VRCopyFile( workdir'\OUT\'driver'.DRV', target'\'driver'.DRV')
1068	IF ok == 1 THEN
1069	ok = VRCopyFile( workdir'\OUT\AUXPRINT.PAK', target'\AUXPRINT.PAK')
1070	IF ok == 1 THEN DO
1071	/* Copy the updated files to \OS2\DLL\<driver>, replacing any
1072	* existing copies. (This prevents problems if the OS/2 driver
1073	* installation doesn't/fails to copy them, which can happen under
1074	* some circumstances.)
1075	*/
1076	IF VRFileExists( globals.!os2dir'\DLL\'driver ) THEN DO
1077	CALL VRCopyFile workdir'\OUT\AUXPRINT.PAK',,
1078	globals.!os2dir'\DLL\'driver'\AUXPRINT.PAK'
1079	ADDRESS CMD '@UNLOCK' workdir'\OUT\'driver'.DRV 2>NUL 1>NUL'
1080	CALL VRCopyFile workdir'\OUT\'driver'.DRV',,
1081	globals.!os2dir'\DLL\'driver'\'driver'.DRV'
1082	END
1083	END
1084	IF ok == 0 THEN DO
1085	CALL LINEOUT globals.!log1, VRError()
1086	RETURN 3 /* RC=3 Failed to copy driver files */
1087	END
1088
1089	CALL LINEOUT globals.!log1, newprinters.0 'printers imported successfully.'
1090	DO i = 1 TO newprinters.0
1091	CALL LINEOUT globals.!log1, ' ->' newprinters.i
1092	END
1093	CALL LINEOUT globals.!log1, ''
1094	CALL LINEOUT globals.!log1
1095
1096	/* Clean up our work directories.
1097	*/
1098	CALL VRDeleteFile workdir'\OUT\*'
1099	CALL VRDeleteFile workdir'\*'
1100	CALL VRRmDir( workdir'\OUT')
1101	CALL VRRmDir( workdir )
1102
1103	RETURN 0
1104
1105	/*:VRX Init
1106	*/
1107	Init:
1108	SIGNAL ON NOVALUE NAME __NoValue
1109
1110	/* Hide the VX-REXX console window
1111	*/
1112	CALL VRSet 'Console', 'WindowListTitle', ''
1113
1114	CALL RxFuncAdd 'SysLoadFuncs', 'REXXUTIL', 'SysLoadFuncs'
1115	CALL SysLoadFuncs
1116
1117	CALL LoadSettings
1118	CALL SetLanguage
1119	CALL CheckPrograms
1120
1121	_force_remote = 0
1122	globals.!prt_ppd = ''
1123	IF InitArgs.0 > 0 THEN
1124	DO i = 1 TO InitArgs.0
1125	InitArgs.i = TRANSLATE( InitArgs.i )
1126	IF VRIsDir( InitArgs.i ) THEN
1127	globals.!cupsdir = InitArgs.1
1128	ELSE IF InitArgs.i == '/R' THEN DO
1129	say 'remote'
1130	globals.!cupsdir = ''
1131	_force_remote = 1
1132	END
1133	ELSE IF VRFileExists( InitArgs.i ) THEN DO
1134	_filetype = VRParseFileName( InitArgs.i, 'E')
1135	IF _filetype == 'PPD' THEN
1136	globals.!prt_ppd = InitArgs.i
1137	END
1138	END
1139
1140	IF globals.!cupsdir == '' & \_force_remote THEN
1141	CALL VRMessage VRWindow(),,
1142	NLSGetMessage( 65, 'CUPSWIZ F:\CUPS') \|\|, /* 65: CUPS could not be located ... on the command line to this program (e.g "%1"). */
1143	'0d0a0d0a'x \|\| NLSGetMessage( 66 ),, /* 66: Only remote CUPS queues ... start this program with the /R parameter.) */
1144	NLSGetMessage( 28 ), 'E' /* 28: CUPS Path Not Found or Not Valid */
1145
1146	/* Delete the error log file each time the program starts.
1147	*/
1148	IF VRFileExists( globals.!log2 ) THEN
1149	CALL VRDeleteFile globals.!log2
1150
1151	window = VRWindow()
1152	call VRMethod window, "CenterWindow"
1153	call VRSet window, "Visible", 1
1154	call VRMethod window, "Activate"
1155	drop window
1156
1157	manufacturers.0 = 0
1158	CALL SetPage1
1159
1160	RETURN
1161
1162	/*:VRX InitMessageLog
1163	*/
1164	/* Initialize the message logfile. Unlike the error log, which is cleared and
1165	* recreated every time the program starts, the message log is appended to
1166	* until it reaches 100kB in size. If the message log is larger than 100kB when
1167	* this function is called, it is renamed (with '~' appended to the name) and
1168	* a new message log is started.
1169	*/
1170	InitMessageLog: PROCEDURE EXPOSE globals.
1171
1172	logsize = STREAM( globals.!log1, 'C', 'QUERY SIZE')
1173	IF ( logsize <> '') & ( logsize > 102400 ) THEN DO
1174	CALL VRCopyFile globals.!log1, globals.!log1 \|\| '~'
1175	CALL VRDeleteFile globals.!log1
1176	END
1177
1178	datestr = DATE('L') TIME('N')
1179	CALL LINEOUT globals.!log1, '--[' datestr ']' \|\|,
1180	COPIES('-', 73 - LENGTH( datestr ))
1181	RETURN
1182
1183	/*:VRX LB_BRAND_Click
1184	*/
1185	LB_BRAND_Click: PROCEDURE EXPOSE globals. manufacturers.
1186
1187	CALL VRSet 'WN_MAIN', 'StatusText', ''
1188
1189	index = VRGet('LB_BRAND', 'Selected')
1190	IF index == 0 THEN RETURN
1191
1192	item = VRMethod('LB_BRAND', 'GetItemData', index )
1193	IF item == 0 THEN RETURN
1194
1195	DO i = 1 TO manufacturers.item.!printers.0
1196	models.i = manufacturers.item.!printers.i.!model
1197	/* ppds.i = manufacturers.item.!printers.i.!driver */
1198	IF manufacturers.item.!printers.i.!driver == '' THEN
1199	ppds.i = ''
1200	ELSE
1201	ppds.i = i
1202
1203	/* DEBUG
1204	say 'Model: ' manufacturers.item.!printers.i.!model
1205	say 'Driver: ' manufacturers.item.!printers.i.!driver
1206	say ' ' manufacturers.item.!printers.i.!longname
1207	if manufacturers.item.!printers.i.!driver2 <> '' then
1208	say 'Alternate:' manufacturers.item.!printers.i.!driver2
1209	if manufacturers.item.!printers.i.!longname2 <> '' then
1210	say ' ' manufacturers.item.!printers.i.!longname2
1211	say 'Type: ' manufacturers.item.!printers.i.!type
1212	say '---'
1213	*/
1214
1215	END
1216	models.0 = manufacturers.item.!printers.0
1217	ppds.0 = manufacturers.item.!printers.0
1218
1219	CALL VRSet 'WN_MAIN', 'Pointer', 'WAIT'
1220	CALL VRMethod 'LB_SELECT', 'Clear'
1221	CALL VRSet 'LB_SELECT', 'Painting', 0
1222	CALL VRMethod 'LB_SELECT', 'AddStringList', 'models.',, 'ppds.'
1223	CALL VRSet 'LB_SELECT', 'Painting', 1
1224	CALL VRSet 'WN_MAIN', 'Pointer', '<default>'
1225	/* CALL VRSet 'LB_SELECT', 'Selected', 1 */
1226
1227	RETURN
1228
1229	/*:VRX LB_SELECT_Click
1230	*/
1231	LB_SELECT_Click: PROCEDURE EXPOSE globals. manufacturers.
1232	SELECT
1233	WHEN globals.!page == 1 THEN DO
1234	CALL VRSet 'WN_MAIN', 'StatusText', ''
1235
1236	brand = VRGet('LB_BRAND', 'Selected')
1237	IF brand == 0 THEN RETURN
1238	selected = VRGet('LB_SELECT', 'Selected')
1239	IF selected == 0 THEN RETURN
1240	which = VRMethod('LB_SELECT', 'GetItemData', selected )
1241	IF which <> '' THEN DO
1242	man = VRMethod('LB_BRAND', 'GetItemData', brand )
1243	IF man == '' THEN RETURN
1244	make = manufacturers.man.!name
1245	model = manufacturers.man.!printers.which.!model
1246	driver = manufacturers.man.!printers.which.!type
1247	IF WORD( driver, 1 ) == 'hpcups' THEN driver = 'HPLIP'
1248	remark = manufacturers.man.!printers.which.!remark
1249	IF driver == '' THEN
1250	type = ''
1251	ELSE IF remark == '' THEN
1252	type = ' ('driver')'
1253	ELSE
1254	type = ' ('driver' - 'remark')'
1255	CALL VRSet 'WN_MAIN', 'StatusText', make model type
1256	END
1257	END
1258
1259	OTHERWISE NOP
1260	END
1261
1262	CALL VRSet 'PB_NEXT', 'Enabled', 1
1263	RETURN
1264
1265	/*:VRX LoadSettings
1266	*/
1267	LoadSettings: PROCEDURE EXPOSE globals.
1268
1269	me = VRGet('Application', 'Program')
1270	IF me == '' THEN PARSE SOURCE . . me
1271	globals.!mydir = VRParseFilePath( me, 'DP')
1272
1273	/* Get CUPS paths.
1274	*/
1275	PARSE VALUE VRGetIni('eCups', 'CUPS', 'USER') WITH cupsdrv '00'x
1276	IF cupsdrv == '' THEN
1277	cupsdrv = VRParseFilePath( me, 'D') \|\| ':'
1278	ELSE
1279	cupsdrv = STRIP( cupsdrv, 'T', '\')
1280	globals.!cupsdir = cupsdrv'\cups'
1281
1282	/* Get system paths.
1283	*/
1284	globals.!bootdrv = SysBootDrive()
1285	IF globals.!bootdrv == '' THEN
1286	globals.!bootdrv = FILESPEC('DRIVE', VALUE('OS2_SHELL',,'OS2ENVIRONMENT'))
1287	globals.!os2dir = globals.!bootdrv'\OS2'
1288	globals.!tmpdir = VALUE('TMP',,'OS2ENVIRONMENT')
1289	IF globals.!tmpdir == '' THEN
1290	globals.!tmpdir = VALUE('TEMP',,'OS2ENVIRONMENT')
1291	IF globals.!tmpdir == '' THEN
1292	globals.!tmpdir = globals.!mydir
1293	globals.!logdir = VALUE('LOGFILES',,'OS2ENVIRONMENT')
1294	IF globals.!logdir == '' THEN
1295	globals.!logdir = globals.!mydir
1296
1297	globals.!log1 = globals.!logdir'\cupswiz.l1'
1298	globals.!log2 = globals.!logdir'\cupswiz.l2'
1299
1300	/* Get printer-related paths.
1301	*/
1302	PARSE VALUE VRGetIni('PM_INSTALL', 'PDR_DIR', 'USER') WITH repos_dir '00'x .
1303	globals.!repository = repos_dir
1304	globals.!prdrv = STREAM( globals.!os2dir'\install\prdrv.lst', 'C', 'QUERY EXISTS')
1305	globals.!prdesc = STREAM( globals.!os2dir'\install\prdesc.lst', 'C', 'QUERY EXISTS')
1306
1307	/* Set the language file name.
1308	*/
1309	globals.!nlsfile = 'cupswz'
1310
1311	RETURN 0
1312
1313	/*:VRX LoopbackName
1314	*/
1315	/* Check to see if 'localhost' is defined in the HOSTS file. If not, we'll
1316	* have to use '127.0.0.1' instead.
1317	*/
1318	LoopbackName: PROCEDURE
1319
1320	lo_name = '127.0.0.1'
1321	etcdir = VALUE('ETC',,'OS2ENVIRONMENT')
1322	IF etcdir <> '' THEN DO
1323	hosts = STREAM( etcdir'\HOSTS', 'C', 'QUERY EXISTS')
1324	IF hosts <> '' THEN DO
1325	CALL LINEIN hosts, 1, 0
1326	DO WHILE LINES( hosts ) > 0
1327	_hostdef = TRANSLATE( LINEIN( hosts ))
1328	_hostdef = TRANSLATE( _hostdef, ' ', '09'x )
1329	IF WORDPOS('LOCALHOST', _hostdef ) == 2 THEN DO
1330	lo_name = 'localhost'
1331	LEAVE
1332	END
1333	END
1334	END
1335	END
1336
1337	RETURN lo_name
1338
1339	/*:VRX PB_ABOUT_Click
1340	*/
1341	PB_ABOUT_Click:
1342	CALL SW_ABOUT_Close
1343	RETURN
1344
1345	/*:VRX PB_CANCEL_Click
1346	*/
1347	PB_CANCEL_Click:
1348	CALL Quit
1349	return
1350
1351	/*:VRX PB_CREATECANCEL_Click
1352	*/
1353	PB_CREATECANCEL_Click:
1354	CALL SW_CREATE_Close
1355	RETURN
1356
1357	/*:VRX PB_CREATEOK_Click
1358	*/
1359	PB_CREATEOK_Click:
1360
1361	create_os2 = VRGet('CHK_CREATEPM', 'Set')
1362	globals.!os2printer = create_os2
1363	globals.!os2driver = VRGet('DDCB_PRESDRV', 'SelectedString')
1364	globals.!create = 1
1365
1366	CALL SW_CREATE_Close
1367
1368	RETURN
1369
1370	/*:VRX PB_MODELCANCEL_Click
1371	*/
1372	PB_MODELCANCEL_Click:
1373	CALL SW_MODEL_Close
1374	globals.!prt_nick = 'Generic PostScript Printer'
1375	RETURN
1376
1377	/*:VRX PB_MODELOK_Click
1378	*/
1379	PB_MODELOK_Click:
1380	globals.!prt_nick = VRGet( "LB_OS2MODELS", "SelectedString" )
1381	CALL SW_MODEL_Close
1382	RETURN
1383
1384	/*:VRX PB_NETCANCEL_Click
1385	*/
1386	PB_NETCANCEL_Click:
1387	CALL SW_NETWORK_Fini
1388	RETURN
1389
1390	/*:VRX PB_NETOK_Click
1391	*/
1392	PB_NETOK_Click: PROCEDURE EXPOSE globals. port
1393
1394	idx = VRGet('DDCB_PROTOCOL', 'Selected')
1395	which = VRMethod('DDCB_PROTOCOL', 'GetItemData', idx )
1396	server = STRIP( VRGet("EF_SERVER", "Value"))
1397	pqueue = STRIP( VRGet("EF_QUEUE", "Value"))
1398	cqueue = STRIP( VRGet("DDCB_CUPSQUEUES","Value"))
1399	userid = STRIP( VRGet("EF_USERID", "Value"))
1400	passwd = STRIP( VRGet("EF_PASSWORD", "Value"))
1401
1402	invalid = 0
1403
1404	SELECT
1405	WHEN which == 1 THEN DO /* IPP */
1406	IF server == '' \| pqueue == '' THEN invalid = 1
1407	uri = 'ipp://'
1408	IF userid <> '' THEN DO
1409	uri = uri \|\| userid
1410	IF passwd <> '' THEN uri = uri':'passwd
1411	uri = uri'@'
1412	END
1413	uri = uri \|\| server'/'pqueue
1414	END
1415	WHEN which == 2 THEN DO /* SOCKET */
1416	IF server == '' THEN invalid = 1
1417	uri = 'socket://'server
1418	END
1419	WHEN which == 3 THEN DO /* LPD */
1420	IF server == '' THEN invalid = 1
1421	IF pqueue == '' THEN pqueue = '*'
1422	IF userid <> '' THEN
1423	uri = 'ipp://'userid'@'server'/'pqueue
1424	ELSE
1425	uri = 'lpd://'server'/'pqueue
1426	END
1427	WHEN which == 4 THEN DO /* SMB */
1428	IF server == '' \| pqueue == '' THEN invalid = 1
1429	uri = 'smb://'
1430	IF userid <> '' THEN DO
1431	uri = uri \|\| userid
1432	IF passwd <> '' THEN uri = uri':'passwd
1433	uri = uri'@'
1434	END
1435	uri = uri \|\| server'/'pqueue
1436	END
1437	OTHERWISE DO /* Existing CUPS */
1438	IF server == '' \| cqueue == '' THEN invalid = 1
1439	ELSE DO
1440	globals.!remotecups = server cqueue
1441	uri = ''
1442	END
1443	END
1444	END
1445
1446	IF invalid == 1 THEN DO
1447	CALL VRMessage VRWindow(), NLSGetMessage( 74 ),, /* 74: Missing required value(s). */
1448	NLSGetMessage( 75 ), 'E' /* 75: Missing Value(s) */
1449	RETURN
1450	END
1451
1452	port = uri
1453	CALL SW_NETWORK_Fini
1454
1455	RETURN
1456
1457	/*:VRX PB_NEXT_Click
1458	*/
1459	PB_NEXT_Click: PROCEDURE EXPOSE globals. manufacturers.
1460
1461	SELECT
1462	WHEN globals.!page == 1 THEN DO
1463	brand = VRGet('LB_BRAND', 'Selected')
1464	IF brand == 0 THEN RETURN
1465	selected = VRGet('LB_SELECT', 'Selected')
1466	IF selected == 0 THEN RETURN
1467
1468	CALL VRSet 'WN_MAIN', 'StatusText', ''
1469
1470	which = VRMethod('LB_SELECT', 'GetItemData', selected )
1471	IF which == '' THEN DO
1472	globals.!mode = 2 /* Mode 2: user-selected PPD file */
1473	ppd = VRFileDialog( VRWindow(), NLSGetMessage( 24 ), 'O', '.ppd') / 24: Select PPD */
1474	IF ppd == '' THEN RETURN
1475	globals.!prt_ppd = ppd
1476	globals.!prt_dev = ''
1477	globals.!prt_nick = GetNameFromPPD( ppd )
1478	IF globals.!prt_nick == '' THEN DO
1479	CALL VRMessage VRWindow(), NLSGetMessage( 76, ppd ),, /* 76: Could not read printer name from %1. */
1480	NLSGetMessage( 77 ), 'E' /* 77: Invalid PPD */
1481	RETURN
1482	END
1483	END
1484	ELSE DO
1485	man = VRMethod('LB_BRAND', 'GetItemData', brand )
1486	IF man == '' THEN DO
1487	/* TODO display an error? But this shouldn't be possible... */
1488	RETURN
1489	END
1490	ppd = manufacturers.man.!printers.which.!driver
1491	globals.!mode = 1 /* Mode 1: CUPS-included model */
1492	IF POS('exe://', ppd ) > 0 THEN DO
1493	globals.!prt_ppd = ''
1494	globals.!prt_dev = ppd
1495	sel_brand = VRGet('LB_BRAND', 'SelectedString')
1496	sel_name = sel_brand VRMethod('LB_SELECT', 'GetString', selected )
1497	PARSE VAR sel_name _nick ' - CUPS' .
1498	IF _nick == '' THEN
1499	globals.!prt_nick = STRIP( sel_name )
1500	ELSE
1501	globals.!prt_nick = STRIP( _nick )
1502	END
1503	ELSE DO
1504	globals.!prt_ppd = TRANSLATE( globals.!cupsdir'/share/cups/model/'ppd, '\', '/')
1505	globals.!prt_dev = ''
1506	globals.!prt_nick = GetNameFromPPD( globals.!prt_ppd )
1507	END
1508	END
1509	globals.!remotecups = ''
1510
1511	CALL InitMessageLog
1512	IF globals.!mode == 2 THEN
1513	CALL LINEOUT globals.!log1, 'Starting printer install with user-provided PPD:'
1514	ELSE
1515	CALL LINEOUT globals.!log1, 'Starting printer install for built-in model:'
1516	IF globals.!prt_dev <> '' THEN
1517	CALL LINEOUT globals.!log1, ' - Device name:' globals.!prt_dev
1518	ELSE
1519	CALL LINEOUT globals.!log1, ' - PPD file: ' globals.!prt_ppd
1520	CALL LINEOUT globals.!log1, ' - Model name: ' globals.!prt_nick
1521	CALL LINEOUT globals.!log1, ''
1522
1523	CALL SetPage2
1524	END
1525
1526	WHEN globals.!page == 2 THEN DO
1527	selected = VRGet('LB_SELECT', 'Selected')
1528	IF selected == 0 THEN RETURN
1529	port = VRMethod('LB_SELECT', 'GetItemData', selected )
1530
1531	IF port == '' THEN DO
1532	/* Network printer selected; prompt for the connection details
1533	*/
1534	CALL VRLoadSecondary 'SW_NETWORK', 'W'
1535	END
1536
1537	IF port == '' & globals.!remotecups == '' THEN RETURN
1538	globals.!prt_port = port
1539
1540	CALL SetPage3
1541	END
1542
1543	WHEN globals.!page == 3 THEN DO
1544	globals.!prt_name = STRIP( VRGet('EF_NAME', 'Value'))
1545	globals.!prt_loc = STRIP( VRGet('EF_LOCATION', 'Value'))
1546	globals.!prt_info = STRIP( VRGet('EF_DESC', 'Value'))
1547	IF ((( globals.!prt_name == '') \|,
1548	( globals.!prt_loc == '')) & ( globals.!remotecups == '')) \|,
1549	( globals.!prt_info == '') THEN
1550	DO
1551	IF ( globals.!remotecups <> '') THEN
1552	_errmsg = NLSGetMessage( 42 ) /* 42: You must enter a description. */
1553	ELSE
1554	_errmsg = NLSGetMessage( 43 ) /* 43: You must enter a name, a location, and a description. */
1555	CALL VRMessage VRWindow(), _errmsg, NLSGetMessage( 75 ), 'E' /* 75: Missing Value(s) */
1556	RETURN
1557	END
1558	IF ( globals.!remotecups == '' &,
1559	( POS( LEFT( globals.!prt_name, 1 ),,
1560	'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz') == 0 ) \|,
1561	( VERIFY( globals.!prt_name, '/# ' \|\| '09'x, 'MATCH') <> 0 )) THEN
1562	DO
1563	CALL VRMessage VRWindow(), NLSGetMessage( 44 ),, /* 44: The printer name must start with ... or tab characters. */
1564	NLSGetMessage( 45 ), 'E' /* 45: Invalid Name */
1565	RETURN
1566	END
1567
1568	/* TODO support other drivers
1569	*/
1570	IF WORD( globals.!prt_nick, 1 ) == 'Apollo' \|,
1571	WORD( globals.!prt_nick, 1 ) == 'HP' \|,
1572	WORD( globals.!prt_nick, 1 ) == 'Hewlett-Packard' THEN
1573	globals.!os2driver = 'ECUPS-HP'
1574	ELSE
1575	globals.!os2driver = 'ECUPS'
1576
1577	CALL ConfirmAndCreate
1578	END
1579
1580	WHEN globals.!page == 4 THEN DO
1581	CALL NLSSetText 'PB_NEXT', 'Caption', 5 /* 5: Next > */
1582	CALL VRSet 'EF_NAME', 'Value', ''
1583	CALL VRSet 'EF_LOCATION', 'Value', ''
1584	CALL VRSet 'EF_DESC', 'Value', ''
1585
1586	globals.!prt_ppd = ''
1587	CALL SetPage1
1588	END
1589
1590	OTHERWISE NOP
1591	END
1592
1593	RETURN
1594
1595	/*:VRX PICT_ICON_Click
1596	*/
1597	PICT_ICON_Click: PROCEDURE EXPOSE globals.
1598	CALL VRLoadSecondary 'SW_ABOUT', 'W'
1599	RETURN
1600
1601	/*:VRX PromptForPMName
1602	*/
1603	PromptForPMName: PROCEDURE EXPOSE globals. models. best
1604	best = MatchPrinterModel( globals.!os2driver, globals.!prt_nick )
1605
1606	IF models.0 == 0 THEN DO
1607	/* No similar models were found in the list of supported printers.
1608	* Just use the generic PS driver.
1609	*/
1610	CALL VRMessage VRWindow(), NLSGetMessage( 67, globals.!prt_nick, globals.!os2driver ),, /* 67: The printer "%1" does not ... application support. */
1611	NLSGetMessage( 68 ), 'W' /* 68: Printer Name Not Found */
1612	globals.!prt_nick = 'Generic PostScript Printer'
1613	RETURN
1614	END
1615
1616	CALL VRLoadSecondary 'SW_MODEL', 'W'
1617
1618	RETURN
1619
1620	/*:VRX Quit
1621	*/
1622	Quit:
1623	window = VRWindow()
1624	call VRSet window, "Shutdown", 1
1625	drop window
1626	return
1627
1628	/*:VRX SetLanguage
1629	*/
1630	SetLanguage: PROCEDURE EXPOSE globals.
1631	PARSE ARG locale
1632
1633	/*
1634	* This function locates the proper language files, and uses the message
1635	* file to sets all UI text. If the language could not be determined, we
1636	* default to English.
1637	*/
1638	execPath = VRGet('Application', 'Program')
1639	execDir = VRParseFileName( execPath, 'DP')
1640
1641	/*
1642	* First, figure out what language/message file to use.
1643	*/
1644	IF locale <> '' THEN
1645	syslanguage = locale
1646	ELSE
1647	syslanguage = VALUE('LANG',,'OS2ENVIRONMENT')
1648
1649	SELECT
1650	WHEN TRANSLATE( syslanguage ) == 'ZH_TW' THEN nlv = 'tw'
1651	WHEN TRANSLATE( syslanguage ) == 'ZH_CN' THEN nlv = 'cx'
1652	OTHERWISE PARSE VAR syslanguage nlv '_' .
1653	END
1654	nlvfile = globals.!nlsfile \|\| nlv
1655	IF ( STREAM( execDir'\'nlvfile'.msg', 'C', 'QUERY EXISTS') \= '') \| ( SysSearchPath('DPATH', nlvfile'.msg') \= '') THEN DO
1656	globals.!messages = nlvfile'.msg'
1657	helpfile = nlvfile'.hlp'
1658	CALL VRSet 'WN_MAIN', 'HelpFile', helpfile
1659	END
1660	ELSE DO
1661	globals.!messages = globals.!nlsfile \|\| 'en.msg'
1662	helpfile = globals.!nlsfile \|\| 'en.hlp'
1663	CALL VRSet 'WN_MAIN', 'HelpFile', helpfile
1664	END
1665
1666	/*
1667	* If the message file is missing or unreadable, display an error and then exit.
1668	*/
1669	IF NLSGetMessage( 1 ) == '' THEN DO
1670	CALL VRMessage VRWindow(), 'Language file' TRANSLATE( globals.!messages ) 'could not be loaded.', 'Cannot Continue', 'E'
1671	RETURN 0
1672	END
1673
1674	/*
1675	* Now set the captions for the UI controls on the main window, according
1676	* to the specified language.
1677	*/
1678	CALL NLSSetText 'WN_MAIN', 'Caption', 1 /* 1: Create CUPS Printer */
1679	CALL NLSSetText 'PB_NEXT', 'Caption', 5 /* 5: Next > */
1680	CALL NLSSetText 'PB_CANCEL', 'Caption', 3 /* 3: Cancel */
1681	CALL NLSSetText 'PB_REFRESH', 'Caption', 6 /* 6: Refresh */
1682
1683	RETURN 1
1684
1685	/*:VRX SetPage1
1686	*/
1687	SetPage1: PROCEDURE EXPOSE globals. manufacturers.
1688
1689	CALL VRMethod 'LB_BRAND', 'Clear'
1690
1691	globals.!page = 1
1692	globals.!prt_port = ''
1693	globals.!remotecups = ''
1694	globals.!prt_name = ''
1695	globals.!prt_loc = ''
1696	globals.!prt_info = ''
1697	globals.!os2driver = ''
1698
1699	/* If a PPD was passed on the command line, skip to page 2 */
1700	IF globals.!prt_ppd <> '' THEN DO
1701	globals.!prt_dev = ''
1702	globals.!prt_nick = GetNameFromPPD( globals.!prt_ppd )
1703	IF globals.!prt_nick == '' THEN DO
1704	CALL VRMessage VRWindow(), NLSGetMessage( 76, globals.!prt_ppd ),, /* 76: Could not read printer name from %1. */
1705	NLSGetMessage( 77 ), 'E' /* 77: Invalid PPD */
1706	END
1707	ELSE DO
1708	globals.!mode = 2 /* Mode 2: user-selected PPD file */
1709	globals.!remotecups = ''
1710	CALL InitMessageLog
1711	CALL LINEOUT globals.!log1, 'Starting printer install with user-provided PPD:'
1712	CALL LINEOUT globals.!log1, ''
1713	CALL SetPage2
1714	RETURN
1715	END
1716	END
1717
1718	globals.!prt_ppd = ''
1719	globals.!prt_dev = ''
1720	globals.!prt_nick = ''
1721
1722	CALL VRSet 'PB_NEXT', 'Enabled', 0
1723	CALL VRSet 'LB_BRAND', 'Visible', 1
1724
1725	/* Resize LB_SELECT if necessary to make room for LB_BRAND */
1726	lb_x = VRGet('LB_BRAND', 'Left') + VRGet('LB_BRAND', 'Width') + 60
1727	lb_w = VRGet('GB_INFO', 'Width') - lb_x + VRGet('GB_INFO', 'Left')
1728	CALL VRSet 'LB_SELECT', 'Left', lb_x
1729	CALL VRSet 'LB_SELECT', 'Width', lb_w
1730
1731	CALL VRSet 'LB_SELECT', 'Visible', 1
1732	CALL VRSet 'GB_INFO', 'Visible', 0
1733
1734	CALL VRSet 'WN_MAIN', 'Pointer', 'WAIT'
1735
1736	IF manufacturers.0 == 0 THEN DO
1737
1738	/* Populate the manufacturer list */
1739	IF globals.!cupsdir == '' THEN DO
1740	manufacturers.1.!name = NLSGetMessage( 22 ) /* 22: -- Custom -- */
1741	manufacturers.1.!printers.0 = 1
1742	manufacturers.1.!printers.1.!model = NLSGetMessage( 23 ) /* 23: -- Other printer (requires PPD) -- */
1743	manufacturers.1.!printers.1.!driver = ''
1744	manufacturers.1.!printers.1.!type = ''
1745	manufacturers.1.!printers.1.!remark = NLSGetMessage( 23 ) /* 23: -- Other printer (requires PPD) -- */
1746	manufacturers.1.!printers.1.!driver2 = ''
1747	manufacturers.1.!printers.1.!remark2 = ''
1748	manufacturers.0 = 1
1749	END
1750	ELSE
1751	CALL GetCupsPrinters
1752
1753	END
1754	CALL NLSSetText 'DT_INFO', 'Caption', 21 /* 21: Select the printer manufacturer and model from the list below. */
1755
1756	CALL VRSet 'LB_BRAND', 'Painting', 0
1757	DO i = 1 TO manufacturers.0
1758	addman.i = manufacturers.i.!name
1759	addidx.i = i
1760	END
1761	addman.0 = manufacturers.0
1762	addidx.0 = manufacturers.0
1763	CALL VRMethod 'LB_BRAND', 'AddStringList', 'addman.',, 'addidx.'
1764	CALL VRSet 'LB_BRAND', 'Painting', 1
1765
1766	CALL VRMethod 'LB_BRAND', 'SetFocus'
1767	CALL VRSet 'LB_BRAND', 'Selected', 1
1768	CALL VRSet 'WN_MAIN', 'Pointer', '<default>'
1769
1770	RETURN
1771
1772	/*:VRX SetPage2
1773	*/
1774	SetPage2: PROCEDURE EXPOSE globals.
1775
1776	globals.!page = 2
1777	CALL VRSet 'LB_BRAND', 'Visible', 0
1778	CALL VRSet 'PB_NEXT', 'Enabled', 0
1779	CALL NLSSetText 'WN_MAIN', 'StatusText', 29, globals.!prt_nick /* 29: Selected printer: %1 */
1780
1781	/* Resize LB_SELECT to the full width of GB_INFO */
1782	lb_x = VRGet('GB_INFO', 'Left')
1783	lb_w = VRGet('GB_INFO', 'Width')
1784	CALL VRSet 'LB_SELECT', 'Left', lb_x
1785	CALL VRSet 'LB_SELECT', 'Width', lb_w
1786
1787	CALL VRMethod 'LB_SELECT', 'Clear'
1788
1789	CALL VRSet 'WN_MAIN', 'Pointer', 'WAIT'
1790	IF globals.!cupsdir == '' THEN DO
1791	CALL VRMethod 'LB_SELECT', 'AddString', NLSGetMessage( 34 ),, '' /* 34: Network printer (manual configuration) */
1792	CALL VRSet 'LB_SELECT', 'Selected', 1
1793	END
1794	ELSE
1795	CALL GetCupsPorts
1796	CALL VRMethod 'LB_SELECT', 'SetFocus'
1797	CALL VRSet 'WN_MAIN', 'Pointer', '<default>'
1798
1799	RETURN
1800
1801	/*:VRX SetPage3
1802	*/
1803	SetPage3: PROCEDURE EXPOSE globals.
1804
1805	globals.!page = 3
1806	CALL VRSet 'EF_DESC', 'Value', globals.!prt_nick
1807	CALL NLSSetText DT_NAME, 'Caption', 103 /* 103: Name: */
1808	CALL NLSSetText DT_LOCATION, 'Caption', 105 /* 105: Location: */
1809	CALL NLSSetText DT_DESC, 'Caption', 106 /* 106: Description: */
1810
1811	CALL VRMethod 'LB_SELECT', 'Clear'
1812
1813	CALL VRSet 'LB_SELECT', 'Visible', 0
1814	CALL VRSet 'GB_INFO', 'Visible', 1
1815	IF globals.!remotecups == '' THEN DO
1816	CALL NLSSetText 'DT_INFO', 'Caption', 40 /* 40: Choose the printer name, and enter its location and a short description. */
1817	CALL VRSet 'DT_NAME', 'Visible', 1
1818	CALL VRSet 'EF_NAME', 'Visible', 1
1819	CALL VRSet 'DT_LOCATION', 'Visible', 1
1820	CALL VRSet 'EF_LOCATION', 'Visible', 1
1821	END
1822	ELSE
1823	CALL NLSSetText 'DT_INFO', 'Caption', 41 /* 41: Enter a short description of this printer. This will be used for the printer object that appears on your desktop. */
1824	CALL VRSet 'DT_DESC', 'Visible', 1
1825	CALL VRSet 'EF_DESC', 'Visible', 1
1826
1827	CALL VRMethod 'EF_NAME', 'SetFocus'
1828
1829	RETURN
1830
1831	/*:VRX SetPage4
1832	*/
1833	SetPage4:
1834
1835	globals.!page = 4
1836	CALL VRSet 'LB_SELECT', 'Visible', 0
1837	CALL VRSet 'GB_INFO', 'Visible', 0
1838	CALL VRSet 'WN_MAIN', 'StatusText', ''
1839
1840	RETURN
1841
1842	/*:VRX SW_ABOUT_Close
1843	*/
1844	SW_ABOUT_Close:
1845	call SW_ABOUT_Fini
1846	return
1847
1848	/*:VRX SW_ABOUT_Create
1849	*/
1850	SW_ABOUT_Create:
1851	call SW_ABOUT_Init
1852	return
1853
1854	/*:VRX SW_ABOUT_Fini
1855	*/
1856	SW_ABOUT_Fini:
1857	window = VRInfo( "Window" )
1858	call VRDestroy window
1859	drop window
1860	return
1861	/*:VRX SW_ABOUT_Init
1862	*/
1863	SW_ABOUT_Init:
1864
1865	CALL NLSSetText 'SW_ABOUT', 'Caption', 10 /* 10: Product Information */
1866	CALL NLSSetText 'DT_ABOUT1', 'Caption', 11 /* 11: eCups Printer Install Utility */
1867	CALL NLSSetText 'DT_ABOUT2', 'Caption', 12, '1.04' /* 12: Version %1 */
1868	CALL NLSSetText 'DT_ABOUT3', 'Caption', 13, '2010, 2013' /* 13: (C) %1 Alex Taylor */
1869	CALL NLSSetText 'PB_ABOUT', 'Caption', 2 /* 10: Product Information */
1870
1871	CALL NLSSetText 'DT_BOOTDRIVE', 'Caption', 14, TRANSLATE( globals.!bootdrv ) /* 14: System boot volume: %1 */
1872	CALL NLSSetText 'DT_CUPSPATH', 'Caption', 15, TRANSLATE( globals.!cupsdir ) /* 15: Local CUPS directory: %1 */
1873	CALL NLSSetText 'DT_REPOSITORY', 'Caption', 16, TRANSLATE( globals.!repository ) /* 16: Local driver repository: %1 */
1874
1875	window = VRInfo( "Object" )
1876	if( \VRIsChildOf( window, "Notebook" ) ) then do
1877	call VRMethod window, "CenterWindow"
1878	call VRSet window, "Visible", 1
1879	call VRMethod window, "Activate"
1880	end
1881	drop window
1882	return
1883
1884	/*:VRX SW_CREATE_Close
1885	*/
1886	SW_CREATE_Close:
1887	call SW_CREATE_Fini
1888	return
1889
1890	/*:VRX SW_CREATE_Create
1891	*/
1892	SW_CREATE_Create:
1893	call SW_CREATE_Init
1894	return
1895
1896	/*:VRX SW_CREATE_Fini
1897	*/
1898	SW_CREATE_Fini:
1899	window = VRInfo( "Window" )
1900	call VRDestroy window
1901	drop window
1902	return
1903	/*:VRX SW_CREATE_Init
1904	*/
1905	SW_CREATE_Init:
1906
1907	CALL NLSSetText 'SW_CREATE', 'Caption', 115 /* 115: Confirm Create Printer */
1908	CALL NLSSetText 'DT_CRMODEL', 'Caption', 102 /* 102: Model: */
1909	CALL NLSSetText 'DT_CRLOC', 'Caption', 105 /* 105: Location: */
1910	CALL NLSSetText 'DT_CRDESC', 'Caption', 106 /* 106: Description: */
1911
1912	CALL NLSSetText 'CHK_CREATEPM', 'Caption', 109 /* 109: Create printer object */
1913	CALL NLSSetText 'DT_PRESDRV', 'Caption', 110 /* 110: Presentation driver: */
1914	CALL NLSSetText 'PB_CREATEOK', 'Caption', 111 /* 111: Create */
1915	CALL NLSSetText 'PB_CREATECANCEL', 'Caption', 3 /* 3: Cancel */
1916	CALL NLSSetText 'PB_CREATEHELP', 'Caption', 4 /* 4: ~Help */
1917
1918	CALL VRSet 'EF_CRMODEL', 'Value', globals.!prt_nick
1919
1920	IF globals.!remotecups <> '' THEN DO
1921	/* An existing CUPS printer was indicated. This means we're not
1922	* creating a CUPS printer, but only a PM printer object (and port)
1923	* that points to it.
1924	*/
1925	CALL NLSSetText 'DT_CREATE', 'Caption', 101 /* 101: Ready to create printer object with the following parameters. */
1926
1927	PARSE VAR globals.!remotecups cups_host cups_printer .
1928	CALL NLSSetText 'DT_CRNAME', 'Caption', 107 /* 107: CUPS server: */
1929	CALL NLSSetText 'DT_CRURI', 'Caption', 108 /* 108: CUPS queue: */
1930	CALL VRSet 'DT_CRLOC', 'Visible', 0
1931	CALL VRSet 'EF_CRNAME', 'Value', cups_host
1932	CALL VRSet 'EF_CRURI', 'Value', cups_printer
1933	CALL VRSet 'EF_CRLOC', 'Visible', 0
1934	CALL VRSet 'CHK_CREATEPM', 'Visible', 0
1935	END
1936	ELSE DO
1937	CALL NLSSetText 'DT_CREATE', 'Caption', 100 /* 100: Ready to create CUPS printer with the following parameters. */
1938	CALL NLSSetText 'DT_CRNAME', 'Caption', 103 /* 103: Name: */
1939	CALL NLSSetText 'DT_CRURI', 'Caption', 104 /* 104: URI: */
1940	CALL VRSet 'EF_CRNAME', 'Value', globals.!prt_name
1941	CALL VRSet 'EF_CRURI', 'Value', globals.!prt_port
1942	CALL VRSet 'EF_CRLOC', 'Value', globals.!prt_loc
1943	END
1944	CALL VRSet 'EF_CRDESC', 'Value', globals.!prt_info
1945
1946	IF QueryAvailableDrivers() > 0 THEN DO
1947	def_idx = 1
1948	CALL VRMethod 'DDCB_PRESDRV', 'AddStringList', 'drv_list.'
1949	DO i = 1 TO drv_list.0
1950	IF drv_list.i == globals.!os2driver THEN DO
1951	def_idx = i
1952	LEAVE
1953	END
1954	END
1955	CALL VRSet 'DDCB_PRESDRV', 'Selected', def_idx
1956	END
1957	ELSE DO /* 112: No eCups-compatible OS/2 presentation drivers are installed. */
1958	/* 113: Please install the ECUPS or ECUPS-HP printer driver before continuing. */
1959	CALL VRMessage VRWindow(),
1960	NLSGetMessage( 112 ) \|\| '0d0a0d0a'x \|\| NLSGetMessage( 113 ),,
1961	NLSGetMessage( 114 ), 'E' /* 114: Missing PM Driver */
1962	CALL VRSet 'PB_CREATEOK', 'Enabled', 0
1963	/* TODO give an error if no drivers were found */
1964	END
1965
1966	window = VRInfo( "Object" )
1967	if( \VRIsChildOf( window, "Notebook" ) ) then do
1968	call VRMethod window, "CenterWindow"
1969	call VRSet window, "Visible", 1
1970	call VRMethod window, "Activate"
1971	end
1972	drop window
1973
1974	RETURN
1975
1976	/*:VRX SW_MODEL_Close
1977	*/
1978	SW_MODEL_Close:
1979	call SW_MODEL_Fini
1980	return
1981
1982	/*:VRX SW_MODEL_Create
1983	*/
1984	SW_MODEL_Create:
1985	call SW_MODEL_Init
1986	return
1987
1988	/*:VRX SW_MODEL_Fini
1989	*/
1990	SW_MODEL_Fini:
1991
1992	CALL VRSet 'WN_MAIN', 'Pointer', 'WAIT'
1993
1994	window = VRInfo( "Window" )
1995	call VRDestroy window
1996	drop window
1997	return
1998	/*:VRX SW_MODEL_Init
1999	*/
2000	SW_MODEL_Init:
2001
2002	CALL NLSSetText 'SW_MODEL', 'Caption', 120 /* 120: Select Printer Model */
2003
2004	/* We should have a list of suggested printer models whose names at least
2005	* partially match the requested model, sorted in order with the closest
2006	* match at the top.
2007	*/
2008	ok = VRMethod( "LB_OS2MODELS", "AddStringList", "models.", )
2009	IF best > 0 THEN
2010	CALL VRSet 'LB_OS2MODELS', 'Selected', best
2011
2012	CALL NLSSetText 'DT_MODEL1', 'Caption',,
2013	121, globals.!prt_nick, globals.!os2driver /* 121: The printer "%1" could not ... to applications. */
2014	CALL NLSSetText 'DT_MODEL2', 'Caption', 122 /* 122: You can select one of ... use a generic driver. */
2015
2016	CALL NLSSetText 'PB_MODELOK', 'Caption', 2 /* 2: OK */
2017	CALL NLSSetText 'PB_MODELCANCEL', 'Caption', 3 /* 3: Cancel */
2018
2019	CALL VRSet 'WN_MAIN', 'Pointer', '<default>'
2020
2021	window = VRInfo( "Object" )
2022	if( \VRIsChildOf( window, "Notebook" ) ) then do
2023	call VRMethod window, "CenterWindow"
2024	call VRSet window, "Visible", 1
2025	call VRMethod window, "Activate"
2026	end
2027	drop window
2028
2029	RETURN
2030
2031	/*:VRX SW_NETWORK_Close
2032	*/
2033	SW_NETWORK_Close:
2034	call SW_NETWORK_Fini
2035	return
2036
2037	/*:VRX SW_NETWORK_Create
2038	*/
2039	SW_NETWORK_Create:
2040	call SW_NETWORK_Init
2041	return
2042
2043	/*:VRX SW_NETWORK_Fini
2044	*/
2045	SW_NETWORK_Fini:
2046
2047	network_dialog = 0
2048
2049	window = VRInfo( "Window" )
2050	call VRDestroy window
2051	drop window
2052	return
2053	/*:VRX SW_NETWORK_Init
2054	*/
2055	SW_NETWORK_Init:
2056
2057	/* Flag to keep track of whether dialog is open */
2058	network_dialog = 1
2059
2060	CALL NLSSetText 'SW_NETWORK', 'Caption', 80 /* 80: Network Printer */
2061	CALL NLSSetText 'DT_PROTOCOL', 'Caption', 81 /* 81: Network protocol: */
2062	CALL NLSSetText 'DT_PASSWORD', 'Caption', 90 /* 90: Password: */
2063	CALL NLSSetText 'PB_NETOK', 'Caption', 2 /* 2: OK */
2064	CALL NLSSetText 'PB_NETCANCEL', 'Caption', 3 /* 3: Cancel */
2065	CALL NLSSetText 'PB_NETHELP', 'Caption', 4 /* 4: ~Help */
2066
2067	IF globals.!cupsdir == '' THEN DO
2068	protos.0 = 1
2069	protos.1 = NLSGetMessage( 91 ) /* 91: Existing CUPS printer (remote server) */
2070	pnums.0 = 1
2071	pnums.1 = 5
2072	END
2073	ELSE DO
2074	protos.0 = 5
2075	protos.1 = NLSGetMessage( 92 ) /* 92: Internet Printing Protocol (IPP) */
2076	protos.2 = NLSGetMessage( 93 ) /* 93: AppSocket/JetDirect */
2077	protos.3 = NLSGetMessage( 94 ) /* 94: Line Printer Remote daemon (LPD) */
2078	protos.4 = NLSGetMessage( 95 ) /* 95: Windows/SMB network */
2079	protos.5 = NLSGetMessage( 96 ) /* 96: Existing CUPS printer */
2080	pnums.0 = 5
2081	pnums.1 = 1
2082	pnums.2 = 2
2083	pnums.3 = 3
2084	pnums.4 = 4
2085	pnums.5 = 5
2086	END
2087
2088	CALL VRMethod 'DDCB_PROTOCOL', 'AddStringList', 'protos.',, 'pnums.'
2089	CALL VRSet 'DDCB_PROTOCOL', 'Selected', 1
2090
2091	window = VRInfo( "Object" )
2092	if( \VRIsChildOf( window, "Notebook" ) ) then do
2093	call VRMethod window, "CenterWindow"
2094	call VRSet window, "Visible", 1
2095	call VRMethod window, "Activate"
2096	end
2097	drop window
2098	return
2099
2100	/*:VRX WN_MAIN_Close
2101	*/
2102	WN_MAIN_Close:
2103	call Quit
2104	return
2105

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format