| [55] | 1 | !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|---|
| 2 | !! THIS INFORMATION IS OUTDATED WITH REGARD TO THE ECOMSTATION ADAPTED !!
|
|---|
| 3 | !! VERSIONS OF AIR-BOOT ! (Versions v1.07 and higher) !!
|
|---|
| 4 | !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|---|
| [12] | 5 |
|
|---|
| [55] | 6 |
|
|---|
| 7 |
|
|---|
| [29] | 8 | ÖÄ[ Developer Information for AiR-BOOT v1.05+ ]ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ·
|
|---|
| 9 | ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄ ú ú ÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ·
|
|---|
| 10 | º º
|
|---|
| 11 | º This documentation is meant for developers that wish to support AiR-BOOT. º
|
|---|
| 12 | º It explains detection, verification and reading/changing configuration of º
|
|---|
| 13 | º AiR-BOOT. º
|
|---|
| 14 | º º
|
|---|
| 15 | ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄ ú ú ÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄœ
|
|---|
| 16 | ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄœ
|
|---|
| [12] | 17 |
|
|---|
| 18 | 1.1 - Foreword
|
|---|
| 19 | 2.1 - Detection
|
|---|
| 20 | 2.2 - Code-Image
|
|---|
| 21 | 2.3 - Config-Data
|
|---|
| 22 | 3.1 - Configuration
|
|---|
| 23 | 3.2 - Internal Partition Table
|
|---|
| 24 | 3.3 - Hide-Configuration
|
|---|
| 25 |
|
|---|
| 26 | -------------------------------------------------------------------------------
|
|---|
| 27 |
|
|---|
| 28 | ===================
|
|---|
| 29 | | 1.1 - FOREWORD |
|
|---|
| 30 | ===================
|
|---|
| 31 |
|
|---|
| 32 | This document defines several aspects of AiR-BOOT v0.26b+ and is
|
|---|
| [29] | 33 | currently on the level of AiR-BOOT v1.05+.
|
|---|
| [12] | 34 |
|
|---|
| 35 | AiR-BOOT is an advanced multi-boot-loader that resides completly in
|
|---|
| 36 | MBR/track-0. It has built-in colored menu-driven setup,
|
|---|
| 37 | Virus-Detection and much more.
|
|---|
| 38 |
|
|---|
| 39 | Please keep in mind that you are responsible for doing those changes
|
|---|
| 40 | the documented, correct manner. AiR-BOOT is able to fix some
|
|---|
| 41 | configuration values like Default-Partition, because the user could
|
|---|
| [29] | 42 | have killed that partition as well, but AiR-BOOT is not completely
|
|---|
| [12] | 43 | error-tolerant. Work as defined in this documentation and everything
|
|---|
| 44 | will work as expected.
|
|---|
| 45 |
|
|---|
| 46 | All offsets are zero-based, which means offset 1 is the 2nd byte.
|
|---|
| 47 | Everything is meant to be in Intel-Order.
|
|---|
| 48 |
|
|---|
| [29] | 49 | AiR-BOOT and its source is available via
|
|---|
| 50 | http://air-boot.sourceforge.net
|
|---|
| [12] | 51 |
|
|---|
| [29] | 52 | You may contact the author via
|
|---|
| 53 | m_kiewitz [AT] users [DOT] sourceforge [DOT] net
|
|---|
| [12] | 54 |
|
|---|
| [29] | 55 |
|
|---|
| [12] | 56 | ====================
|
|---|
| 57 | | 2.1 - DETECTION |
|
|---|
| 58 | ====================
|
|---|
| 59 |
|
|---|
| 60 | AiR-BOOT consists of several parts.
|
|---|
| 61 | - AiR-BOOT MBR Code (sector 1)
|
|---|
| 62 | - AiR-BOOT Code (starting at sector 2)
|
|---|
| 63 | - AiR-BOOT configuration (sector 55-59)
|
|---|
| 64 | - AiR-BOOT MBR backup (sector 60)
|
|---|
| 65 |
|
|---|
| 66 | A detailed view:
|
|---|
| 67 |
|
|---|
| 68 | Sec. Name
|
|---|
| 69 | ---------------------------
|
|---|
| 70 | | 1 | Master Boot Record | -> Code
|
|---|
| 71 | | 2 | System-Table | -> Code
|
|---|
| 72 | | 3 | Code | -> Code
|
|---|
| 73 | | .. | ... | -> Code
|
|---|
| 74 | | 55 | Configuration | -> Config
|
|---|
| 75 | | 56 | Partitiontable 1 | -> Config
|
|---|
| 76 | | 57 | Partitiontable 2 | -> Config
|
|---|
| 77 | | 58 | Hide-Configuration | -> Config
|
|---|
| 78 | | 59 | Hide-Configuration | -> Config
|
|---|
| 79 | | 60 | Backup of our MBR | -> Config
|
|---|
| 80 | ---------------------------
|
|---|
| 81 |
|
|---|
| 82 | Internally those parts are combined into Code and Configuration Data.
|
|---|
| 83 | Both can get individually checked for corruption, so if the code is
|
|---|
| 84 | damaged, but the configuration is intact, we don't have to rewrite
|
|---|
| 85 | everything and force the user to reconfigure.
|
|---|
| 86 |
|
|---|
| 87 | Now a basic-routine used for making a checksum out of ONE 512-byte
|
|---|
| 88 | sector. Further use is explained in the following sections.
|
|---|
| 89 |
|
|---|
| 90 | ; In: BX - Base Check
|
|---|
| 91 | ; DS:SI - Pointer to 512-byte-area to be included
|
|---|
| 92 | ; Out: BX - Base Check Result
|
|---|
| 93 | ; Destroyed: SI will get updated (+512)
|
|---|
| 94 | MBR_GetCheckOfSector Proc Near Uses ax cx
|
|---|
| 95 | mov cx, 256
|
|---|
| 96 | GetCheckOfSector_Loop:
|
|---|
| 97 | lodsw
|
|---|
| 98 | xor ax, 0BABEh
|
|---|
| 99 | xor bx, ax
|
|---|
| 100 | loop GetCheckOfSector_Loop
|
|---|
| 101 | or bx, bx
|
|---|
| 102 | jnz GetCheckOfSector_NoFixUp
|
|---|
| 103 | mov bx, 1 ; No 0, because 0 means "empty"
|
|---|
| 104 | GetCheckOfSector_NoFixUp:
|
|---|
| 105 | ret
|
|---|
| 106 | MBR_GetCheckOfSector EndP
|
|---|
| 107 |
|
|---|
| 108 |
|
|---|
| 109 | =====================
|
|---|
| 110 | | 2.2 - CODE-IMAGE |
|
|---|
| 111 | =====================
|
|---|
| 112 |
|
|---|
| 113 | Detecting presence of AiR-BOOT code is easy.
|
|---|
| 114 | Look in the MBR at offset 2 for the signature 'AiRBOOT'.
|
|---|
| 115 |
|
|---|
| 116 | If it's found, then the following structure is legal:
|
|---|
| 117 |
|
|---|
| 118 | -----------------------------------------------------------------------
|
|---|
| 119 | Contents: Standard AiR-BOOT basic information structure
|
|---|
| 120 | =======================================================================
|
|---|
| 121 | Identifier : STRING * 7 - 'AiRBOOT'
|
|---|
| 122 | DayOfRelease : BYTE - in BCD
|
|---|
| 123 | MonthOfRelease : BYTE - in BCD
|
|---|
| 124 | YearOfRelease : WORD - in BCD (non-intel byte order)
|
|---|
| 125 | MajorVersion : BYTE - in BCD
|
|---|
| 126 | MinorVersion : BYTE - in BCD
|
|---|
| 127 | ReleaseLanguage : BYTE - 'D' for dutch
|
|---|
| 128 | 'F' for french
|
|---|
| 129 | 'G' for german
|
|---|
| 130 | 'I' for italian
|
|---|
| 131 | 'R' for russian
|
|---|
| [29] | 132 | 'E' for english (v1.01+)
|
|---|
| [23] | 133 | 'S' for swedish
|
|---|
| [29] | 134 | 'U' for USA (removed in v1.01+)
|
|---|
| [12] | 135 | TotalCodeSectors : BYTE - counting from sector 2
|
|---|
| 136 | CheckSumOfCode : WORD - explained later
|
|---|
| 137 | -----------------------------------------------------------------------
|
|---|
| 138 |
|
|---|
| 139 | Now how to verify, if the Code-Image is completely intact.
|
|---|
| 140 |
|
|---|
| 141 | Please note: There is no verification of the MBR-code. Anyway, if the
|
|---|
| 142 | MBR-code is bad, then the signature should not be in place and it
|
|---|
| 143 | would not load anyway.
|
|---|
| 144 |
|
|---|
| 145 | Code used for verification in x86 assembly:
|
|---|
| 146 |
|
|---|
| 147 | ; DS:SI - point to Sector 2 (the sector following MBR)
|
|---|
| 148 | xor bx, bx
|
|---|
| 149 | mov cx, TotalCodeSectors
|
|---|
| 150 | CheckCodeLoop:
|
|---|
| 151 | call MBR_GetCheckOfSector
|
|---|
| 152 | loop CheckCodeLoop
|
|---|
| 153 | -> BX holds CheckSum
|
|---|
| 154 |
|
|---|
| 155 | Now if BX and CheckSumOfCode match, we got a intact code-image.
|
|---|
| 156 |
|
|---|
| 157 |
|
|---|
| 158 | ======================
|
|---|
| 159 | | 2.3 - CONFIG-DATA |
|
|---|
| 160 | ======================
|
|---|
| 161 |
|
|---|
| 162 | Detecting AiR-BOOT configuration is similar to code detection.
|
|---|
| 163 | Look in sector 55 at offset 0 for the signature 'AiRCFG-TABLE'.
|
|---|
| 164 |
|
|---|
| 165 | If it's found, then the following structure is legal:
|
|---|
| 166 |
|
|---|
| 167 | -----------------------------------------------------------------------
|
|---|
| 168 | Contents: Standard AiR-BOOT config identification structure
|
|---|
| 169 | =======================================================================
|
|---|
| 170 | Identifier : STRING * 13 - 'AiRCFG-TABLE'
|
|---|
| 171 | MajorVersion : BYTE - in BCD
|
|---|
| 172 | MinorVersion : BYTE - in BCD
|
|---|
| 173 | ReleaseLanguage : BYTE - see above
|
|---|
| 174 | EditCounter : DWORD - Will be increased on every save
|
|---|
| 175 | CheckSumOfConfig : WORD - explained later
|
|---|
| 176 | -----------------------------------------------------------------------
|
|---|
| 177 |
|
|---|
| 178 | Please note: MajorVersion/MinorVersion/ReleaseLanguage may NOT have to
|
|---|
| 179 | match the Version in the basic information structure.
|
|---|
| 180 | This is the version of AiR-BOOT that installed the Config
|
|---|
| [29] | 181 | area. It may be as well the current data structure level.
|
|---|
| 182 | Anyway, you need to get the code version to find out what
|
|---|
| 183 | data structure is used.
|
|---|
| [12] | 184 |
|
|---|
| 185 | Code used for verification in x86 assembly:
|
|---|
| 186 |
|
|---|
| 187 | ; DS:SI - point to Sector 55
|
|---|
| 188 | xor bx, bx
|
|---|
| 189 | mov cx, 5 ; total of 5 configuration sectors
|
|---|
| 190 | CheckCodeLoop:
|
|---|
| 191 | call MBR_GetCheckOfSector
|
|---|
| 192 | loop CheckCodeLoop
|
|---|
| 193 | -> BX holds CheckSum
|
|---|
| 194 |
|
|---|
| 195 | Now if BX and CheckSumOfConfig match, we got an intact code-image.
|
|---|
| 196 |
|
|---|
| 197 | Please note: The MBR-BackUp sector is *NOT* included.
|
|---|
| 198 |
|
|---|
| 199 |
|
|---|
| 200 | ========================
|
|---|
| 201 | | 3.1 - CONFIGURATION |
|
|---|
| 202 | ========================
|
|---|
| 203 |
|
|---|
| 204 | Please note: You have to check that the configuration data is INTACT,
|
|---|
| 205 | before even thinking about writing to the configuration
|
|---|
| 206 | area. If it's not intact, consider it as unknown data.
|
|---|
| 207 |
|
|---|
| 208 | After changing anything in configuration area, do the following:
|
|---|
| 209 | - Increase the EditCounter in sector 55 by one
|
|---|
| 210 | - Set the CheckSumConfig to 0
|
|---|
| 211 | - Calculate a new CheckSum by using the algo specified earlier
|
|---|
| 212 | - Set CheckSumConfig to the checksum you calculated
|
|---|
| 213 |
|
|---|
| 214 | In this section, I will specify the basic configuration structure used
|
|---|
| 215 | in sector 55.
|
|---|
| 216 |
|
|---|
| 217 | -----------------------------------------------------------------------
|
|---|
| 218 | Contents: AiR-BOOT basic configuration structure
|
|---|
| 219 | =======================================================================
|
|---|
| 220 | Identifier : STRING * 13 - 'AiRCFG-TABLE'
|
|---|
| 221 | MajorVersion : BYTE - in BCD
|
|---|
| 222 | MinorVersion : BYTE - in BCD
|
|---|
| [29] | 223 | ReleaseLanguage : BYTE - normally 'E' for English
|
|---|
| [12] | 224 | EditCounter : DWORD - Will be increased on every save
|
|---|
| 225 | CheckSumOfConfig : WORD - explained in [2.3]
|
|---|
| 226 | Partitions : BYTE - Partitions count in IPT
|
|---|
| 227 | BootPartitions : BYTE - Removed since v0.28b
|
|---|
| [29] | 228 | DefaultSelection : BYTE - Default-selection no (zero based)
|
|---|
| 229 | FFh - nothing bootable
|
|---|
| 230 | [additions/changes v1.02+]
|
|---|
| 231 | FFh - Floppy Boot
|
|---|
| 232 | FEh - BIOS continue (CD-ROM,etc.)
|
|---|
| 233 | 80h - nothing bootable
|
|---|
| [12] | 234 | LastPartition : BYTE - Last-booted-partition (zero based)
|
|---|
| [29] | 235 | Even under v1.02+, this never
|
|---|
| 236 | contains floppy or Resume-BIOS
|
|---|
| [12] | 237 | TimedBoot : BYTE - 0 - Timed Boot disabled
|
|---|
| 238 | 1 - Timed Boot enabled
|
|---|
| 239 | TimedSeconds : BYTE - How many seconds till Timed Boot
|
|---|
| 240 | TimedDelay : WORD - Internal Do not change
|
|---|
| 241 | TimedBootLast : BYTE - 0 - Boot default, if Timed Boot
|
|---|
| 242 | 1 - Boot last, if Timed Boot
|
|---|
| 243 | RememberBoot : BYTE - 0 - No action
|
|---|
| 244 | 1 - User-Boot->set LastPartition
|
|---|
| 245 | RememberTimed : BYTE - 0 - No action
|
|---|
| 246 | 1 - Timed-Boot->set LastPartition
|
|---|
| 247 | IncludeFloppy : BYTE - 0 - No floppy drive in bootmenu
|
|---|
| 248 | 1 - Floppy drive in bootmenu
|
|---|
| 249 | BootMenuActive : BYTE - 0 - Don't display bootmenu
|
|---|
| 250 | 1 - Display bootmenu
|
|---|
| 251 | 2 - Detailed bootmenu (v0.91+)
|
|---|
| 252 | PartitionsDetect : BYTE - 0 - No action
|
|---|
| 253 | 1 - Add new partitions as bootable
|
|---|
| 254 | PasswordedSetup : BYTE - 0 - No action
|
|---|
| 255 | 1 - Ask Password on enter setup
|
|---|
| 256 | PasswordedSystem : BYTE - 0 - No action
|
|---|
| 257 | 1 - Ask Password everytime
|
|---|
| 258 | PasswordedChngBoot : BYTE - 0 - No action
|
|---|
| 259 | 1 - Ask Password, if user boots
|
|---|
| 260 | by himself
|
|---|
| 261 | ProtectMBRTSR : BYTE - 0 - No action
|
|---|
| 262 | 1 - Install MBR-Protect TSR
|
|---|
| 263 | ProtectMBRignore : BYTE - 0 - System halt on MBR write
|
|---|
| 264 | 1 - Ignoring MBR writes
|
|---|
| 265 | FloppyGetName : BYTE - 0 - No action
|
|---|
| 266 | 1 - Get floppy name on startup
|
|---|
| 267 | DetectVirus : BYTE - 0 - No action
|
|---|
| 268 | 1 - Detect normal MBR virii
|
|---|
| 269 | DetectStealth : BYTE - 0 - No action
|
|---|
| 270 | 1 - Detect stealth MBR virii
|
|---|
| 271 | DetectVIBR : BYTE - 0 - No action
|
|---|
| 272 | 1 - Detect Virii-In-Boot-Record
|
|---|
| 273 | AutoEnterSetup : BYTE - 0 - No action
|
|---|
| 274 | 1 - enter setup automatically
|
|---|
| 275 | (reset by setup)
|
|---|
| 276 | MasterPassword : QWORD - Not documented
|
|---|
| 277 | BootPassword : QWORD - Not documented
|
|---|
| 278 | RudeProtection : BYTE - Removed since v0.28b
|
|---|
| 279 | LinuxPartition : BYTE - Linux Root partition no (0-based)
|
|---|
| [29] | 280 | [not used anymore since 1.02+]
|
|---|
| [12] | 281 | TimedKeyHandling : BYTE - 0 - Do nothing
|
|---|
| 282 | 1 - Reset time
|
|---|
| 283 | 2 - Stop time
|
|---|
| 284 | MakeSound : BYTE - 0 - No action
|
|---|
| 285 | 1 - Make startup/boot sounds
|
|---|
| 286 | FloppyGetTimer : BYTE - 0 - No action
|
|---|
| 287 | 1 - Get floppy name every 2 secs
|
|---|
| 288 | ResumeBIOSbootSeq : BYTE - 0 - Disabled
|
|---|
| 289 | 1 - CD-ROM
|
|---|
| 290 | 2 - Network
|
|---|
| 291 | 3 - ZIP/LS120
|
|---|
| 292 | CooperBars : BYTE - 0 - Disabled
|
|---|
| 293 | 1 - Enabled
|
|---|
| [29] | 294 | [following contents are not used anymore - since 1.02]
|
|---|
| [12] | 295 | LinuxCommandLine : STRING * 75 - Linux Command Line (0-terminated)
|
|---|
| 296 | LinuxKrnlPartition : BYTE - 0FFh - Disabled
|
|---|
| 297 | Otherwise no of partition
|
|---|
| 298 | (has to be FAT-16) (0 based)
|
|---|
| 299 | LinuxDefaultKernel : STRING * 11 - Default Kernel Name
|
|---|
| 300 | will override Default Partition,
|
|---|
| 301 | if found. Filled up with spaces.
|
|---|
| 302 | LinuxKernelNameEnd : BYTE - Fixed ZERO
|
|---|
| 303 | LinuxLastKernel : STRING * 11 - Last-Booted Kernel Name
|
|---|
| 304 | if Partition got booted, this
|
|---|
| 305 | field will get filled with spaces
|
|---|
| 306 | LinuxKernelNameEnd2: BYTE - Fixed ZERO
|
|---|
| [29] | 307 | [End of contents that are not used anymore]
|
|---|
| [12] | 308 | ExtPartitionMShack : BYTE - 0 - Disabled
|
|---|
| 309 | 1 - MS Work-Around Enabled
|
|---|
| 310 | AutomaticBoot : BYTE - Automatic Booting (0.94+)
|
|---|
| 311 | 0 - Disabled
|
|---|
| 312 | 1 - Enabled (only for one time)
|
|---|
| 313 | AutomaticPartition : BYTE - Automatic Booting (0.94+)
|
|---|
| 314 | Partition no (zero based)
|
|---|
| [29] | 315 | FFh - Floppy booting
|
|---|
| 316 | FEh - BIOS continue (CD-ROM,ZIP)
|
|---|
| [12] | 317 | ForceLBAUsage : BYTE - Forces BIOS LBA API Usage (1.00+)
|
|---|
| 318 | 0 - Disabled
|
|---|
| 319 | 1 - Enabled
|
|---|
| [29] | 320 | IgnoreLVM : BYTE - Ignores LVM information (1.02+)
|
|---|
| 321 | 0 - Disabled (do not ignore)
|
|---|
| 322 | 1 - Enabled
|
|---|
| 323 | Reserved : STRING * 253 - RESERVED
|
|---|
| [12] | 324 | AutoDriveLetter : STRING * 5 - RESERVED CONTENT (0.94+)
|
|---|
| 325 | (used by Installer/2)
|
|---|
| 326 | BIOScontIPTentry : STRING * 34 - RESERVED CONTENT
|
|---|
| 327 | VirusDetectionHelp : STRING * 12 - RESERVED CONTENT
|
|---|
| 328 | FloppyIPTentry : STRING * 34 - RESERVED CONTENT
|
|---|
| 329 | -----------------------------------------------------------------------
|
|---|
| 330 |
|
|---|
| 331 | Please note:
|
|---|
| 332 | = Any area marked as Reserved MUST not get touched in any way =
|
|---|
| 333 |
|
|---|
| 334 |
|
|---|
| 335 | ===================================
|
|---|
| 336 | | 3.2 - INTERNAL PARTITION TABLE |
|
|---|
| 337 | ===================================
|
|---|
| 338 |
|
|---|
| 339 | The internal partition table (IPT) is in sectors 56-57.
|
|---|
| 340 |
|
|---|
| 341 | The basic rule: Don't delete/add/move any of those entries.
|
|---|
| 342 | AiR-BOOT will detect changes on the partition tables
|
|---|
| 343 | by itself and will adjust pointers from basic
|
|---|
| 344 | configuration and hide-configuration automatically.
|
|---|
| 345 |
|
|---|
| 346 | Each IPT-entry is 34-bytes long. Those entries begin at offset 0.
|
|---|
| 347 | You have to look in basic configuration to know how many IPT-entries
|
|---|
| 348 | are in there.
|
|---|
| 349 |
|
|---|
| 350 | If you change any partitions-bootable flag, you have to adjust the
|
|---|
| 351 | BootPartitions-variable from basic configuration accordingly.
|
|---|
| 352 |
|
|---|
| 353 | -----------------------------------------------------------------------
|
|---|
| 354 | Contents: AiR-BOOT internal partition table entry (IPT)
|
|---|
| 355 | =======================================================================
|
|---|
| [29] | 356 | SerialNumber : DWORD - Serial number of partition /
|
|---|
| 357 | Partition ID from LVM
|
|---|
| [12] | 358 | (if available)
|
|---|
| [29] | 359 | PartitionName : STRING * 11 - Name of the partition (in sync
|
|---|
| 360 | with LVM and/or boot-record)
|
|---|
| [12] | 361 | Drive : BYTE - Drive of partition (INT 13h-like)
|
|---|
| 362 | PartitionID : BYTE - unhidden ID of partition
|
|---|
| 363 | (08h == NTFS, thanx M$)
|
|---|
| [29] | 364 | (FCh == JFS - v1.05+)
|
|---|
| [12] | 365 | Flags : BYTE - Bit 0 - BootAble
|
|---|
| 366 | Bit 1 - VIBR Detection
|
|---|
| 367 | Bit 2 - Hide Feature used
|
|---|
| 368 | Bit 3 - Logical Drive Letter set
|
|---|
| 369 | Bit 4 - M$ Partition Hack Req.
|
|---|
| 370 | All others: RESERVED
|
|---|
| 371 | CheckSum : WORD - CheckSum of boot-record
|
|---|
| 372 | LocationBegin : STRING * 3 - Cyl/Head/Sec of Boot-Record
|
|---|
| 373 | LocationPartTab : STRING * 3 - Cyl/Head/Sec of Partition Table
|
|---|
| 374 | containing this partition
|
|---|
| 375 | AbsoluteBegin : DWORD - LBA sector of Boot-Record
|
|---|
| 376 | AbsolutePartTab : DWORD - LBA sector of Partition Table
|
|---|
| 377 | -----------------------------------------------------------------------
|
|---|
| 378 |
|
|---|
| 379 | You may change:
|
|---|
| 380 | SerialNumber/PartitionName - If you sync your changes with the
|
|---|
| 381 | bootrecord of the partition
|
|---|
| 382 | Flags - Do not (re)set any reserved bits
|
|---|
| 383 |
|
|---|
| 384 | All other entries should NOT be changed by anyone but AiR-BOOT.
|
|---|
| 385 |
|
|---|
| 386 |
|
|---|
| 387 | =============================
|
|---|
| 388 | | 3.3 - HIDE CONFIGURATION |
|
|---|
| 389 | =============================
|
|---|
| 390 |
|
|---|
| 391 | First of all, if you define a Hide-Configuration, set the "Hide-Feature
|
|---|
| 392 | used" flag. If you delete a Hide-Configuration completely, reset the
|
|---|
| 393 | flag.
|
|---|
| 394 |
|
|---|
| 395 | Hiding is defined per partition using a 30-byte string. This string is
|
|---|
| 396 | built up of Partition-pointers that consist of a single byte.
|
|---|
| 397 |
|
|---|
| 398 | Each partition-pointer is actually the number of the partition in the
|
|---|
| 399 | IPT, which means they are zero-based.
|
|---|
| 400 |
|
|---|
| 401 | The entry FFh is a terminator and actually defines "no-partition".
|
|---|
| 402 | An empty Hide-Configuration entry consists of 30x FFh bytes.
|
|---|
| 403 |
|
|---|
| 404 | The partitions listed in each hide-configuration string should be in-
|
|---|
| 405 | order, which means if you want to hide partition 0, 2 and 3 the string
|
|---|
| 406 | should look like this: 00h 02h 03h FFh (and 26 more FFhs)
|
|---|
| 407 |
|
|---|
| [29] | 408 | The boot-drive-letters string is 30-bytes long. One byte per partition.
|
|---|
| [67] | 409 | It's used for OS/2 use ONLY and it's only definable for HPFS and
|
|---|
| [29] | 410 | FAT16 partitions. If you enable/disable the driveletter, then YOU are
|
|---|
| 411 | required to change the corresponding partition's Drive-Letter flag
|
|---|
| 412 | accordingly.
|
|---|
| [12] | 413 |
|
|---|
| [29] | 414 | Since 1.02, AiR-BOOT supports LVM driveletter adjustment and will
|
|---|
| 415 | change the driveletter of the partition that is to be booted.
|
|---|
| 416 |
|
|---|
| [12] | 417 | -----------------------------------------------------------------------
|
|---|
| 418 | Contents: AiR-BOOT hide configuration
|
|---|
| 419 | =======================================================================
|
|---|
| 420 | HideConfiguration : STRING * 30 - for one partition each
|
|---|
| 421 | * 30 -> 900 Bytes (due maximum of 30 partitions in IPT)
|
|---|
| [29] | 422 | DriveLetters : STRING * 30 - Boot driveletters of partitions
|
|---|
| 423 | [since v0.92+]
|
|---|
| 424 | 00h - disabled
|
|---|
| 425 | 80h - "C"
|
|---|
| 426 | 81h - "D"...
|
|---|
| [12] | 427 | Reserved : STRING * 84 - RESERVED
|
|---|
| 428 | Identifier : STRING * 10 - 'AiRBOOTHID'
|
|---|
| 429 | -----------------------------------------------------------------------
|
|---|
