source: trunk/bootcode/special/lvm.asm@ 229

Last change on this file since 229 was 170, checked in by Ben Rietbroek, 9 years ago

Updated debugging state [v1.1.1-testing]

CAUTION:
This is a testbuild !
AirBoot uses the BIOS to access disks and a small coding error can trash
partition tables or other vital disk structures. You are advised to make
backups of TRACK0 and EBRs before using this testbuild. More info at:
​https://rousseaux.github.io/netlabs.air-boot/pdf/AirBoot-v1.1.0-manual.pdf
File size: 17.5 KB
Line 
1; AiR-BOOT (c) Copyright 1998-2008 M. Kiewitz
2;
3; This file is part of AiR-BOOT
4;
5; AiR-BOOT is free software: you can redistribute it and/or modify it under
6; the terms of the GNU General Public License as published by the Free
7; Software Foundation, either version 3 of the License, or (at your option)
8; any later version.
9;
10; AiR-BOOT is distributed in the hope that it will be useful, but WITHOUT ANY
11; WARRANTY: without even the implied warranty of MERCHANTABILITY or FITNESS
12; FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
13; details.
14;
15; You should have received a copy of the GNU General Public License along with
16; AiR-BOOT. If not, see <http://www.gnu.org/licenses/>.
17;
18;---------------------------------------------------------------------------
19; AiR-BOOT / LVM
20;---------------------------------------------------------------------------
21
22IFDEF MODULE_NAMES
23DB 'LVM',0
24ENDIF
25
26LVM_InitCRCTable Proc Near
27 ; Initializes our LVM-CRC-Table
28 xor cl, cl
29 mov di, offset [LVM_CRCTable]
30 LVM_ICRCT_Loop:
31 ;movzx ax, cl
32 mov al,cl
33 mov ah,0
34 xor dx, dx ; DX:AX - CRC-Value
35 mov ch, 8
36 LVM_ICRCT_Loop2:
37 shr dx, 1
38 rcr ax, 1 ; Shift value 1 to the right
39 jnc LVM_ICRCT_NoXOR
40 xor dx, 0EDB8h
41 xor ax, 8320h
42 LVM_ICRCT_NoXOR:
43 dec ch
44 jnz LVM_ICRCT_Loop2
45 mov wptr [di+0], ax
46 mov wptr [di+2], dx
47 add di, 4
48 add cl, 1
49 jnc LVM_ICRCT_Loop
50 ret
51LVM_InitCRCTable EndP
52
53; Calculates an LVM-Sector CRC of a given sector
54; In: DS:SI - Points to Sector...
55; Out: DX:AX - LVM CRC
56; Destroyed: None
57LVM_GetSectorCRC Proc Near Uses bx cx
58
59IFDEF AUX_DEBUG
60 IF 0
61 DBG_TEXT_OUT_AUX 'LVM_GetSectorCRC:'
62 PUSHRF
63 ;~ call DEBUG_DumpRegisters
64 ;~ call AuxIO_DumpParagraph
65 ;~ call AuxIO_TeletypeNL
66 POPRF
67 ENDIF
68ENDIF
69
70 push word ptr [si+LocLVM_CRC+00]
71 push word ptr [si+LocLVM_CRC+02]
72 push si
73 mov word ptr [si+LocLVM_CRC], 0
74 mov word ptr [si+LocLVM_CRC+2], 0
75 mov ax, -1
76 mov dx, -1
77 mov cx, 512
78 LVM_GSCRC_Loop:
79 xor bh, bh
80 mov bl, al ; Save last byte to BL
81 mov al, ah
82 mov ah, dl
83 mov dl, dh
84 xor dh, dh ; SHR DX:AX, 8
85 xor bl, [si]
86 inc si ; XOR last byte with [data]
87 shl bx, 1
88 shl bx, 1
89 xor ax, word ptr [LVM_CRCTable+bx+0]
90 xor dx, word ptr [LVM_CRCTable+bx+2] ; XOR with CRC-Table
91 loop LVM_GSCRC_Loop
92 pop si
93 pop word ptr [si+LocLVM_CRC+2]
94 pop word ptr [si+LocLVM_CRC]
95 ret
96LVM_GetSectorCRC EndP
97
98; Checks ds:[SI], if a valid LVM Signature is found (sets carry in that case)
99; This does not check for valid LVM CRC (which also needs to be done)
100; In: DS:SI - Sector that needs to get checked...
101; Out: Carry set, if valid LVM signature found
102; Destroyed: None
103LVM_CheckSectorSignature Proc Near
104 test byte ptr [CFG_IgnoreLVM], 1 ; We are supposed to ignore LVM, so
105 jnz LVMCSS_InvalidSignature ; any sector is bad!
106 cmp word ptr [si+LocLVM_SignatureStart], 5202h
107 jne LVMCSS_InvalidSignature
108 cmp word ptr [si+LocLVM_SignatureStart+2], 'BM'
109 jne LVMCSS_InvalidSignature
110 cmp word ptr [si+LocLVM_SignatureStart+4], 'MP'
111 jne LVMCSS_InvalidSignature
112 cmp word ptr [si+LocLVM_SignatureStart+6], 'DF'
113 jne LVMCSS_InvalidSignature
114 stc
115 ret
116 LVMCSS_InvalidSignature:
117 clc
118 ret
119LVM_CheckSectorSignature EndP
120
121; Checks Sector for a valid LVM CRC is encountered
122; First one should check for a valid signature and call this later.
123; In: DS:SI - Sector that needs to get checked...
124; Out: Carry set, if LVM CRC valid
125; Destroyed: None
126LVM_CheckSectorCRC Proc Near Uses ax bx dx
127 call IsSectorBufferZero ; Zero sector implies bad CRC
128 jz LVMCSCRC_BadCRC
129 call LVM_GetSectorCRC ; Only use after CRC table is valid
130 cmp ax, word ptr [si+LocLVM_CRC]
131 jne LVMCSCRC_BadCRC
132 cmp dx, word ptr [si+LocLVM_CRC+2]
133 jne LVMCSCRC_BadCRC
134 stc ; Indicate CRC is OK
135 ret
136 LVMCSCRC_BadCRC:
137 clc ; Indicate BAD CRC
138 ret
139LVM_CheckSectorCRC EndP
140
141; Checks if a sector is a valid LVM-sector
142; Sector is considered valid LVM-sector if both signature and CRC are correct.
143; IN : DS:SI - Buffer with LVM-sector that needs to be checked...
144; OUT : AL.0 - 1 -> LVM Signature found
145; AL.1 - 1 -> CRC OK
146; CY - Signature and CRC OK, otherwise none or invalid LVM sector
147; Destroyed: None
148LVM_ValidateSector Proc Near
149 xor ax, ax ; Assume no Signature or valid CRC
150 call LVM_CheckSectorSignature ; CF=1 -> Signature OK
151 rcl al, 1 ; Store CF in AL.0
152 call LVM_CheckSectorCRC ; CF=1 -> CRC OK
153 rcl ah, 1 ; Store CF in AH.0
154 shl ah, 1 ; Move it to AH.1
155 or al, ah ; Merge CY results to AL
156 cmp al, 3 ; AH=3 -> Signature and CRC OK
157 clc ; Assume invalid LVM-sector
158 jne @F
159 stc ; AH=3 -> Indicate valid LVM-sector
160 @@:
161 mov ah, 0 ; Don't leave garbage in AH
162 ret
163LVM_ValidateSector EndP
164
165; Updates Sector with valid LVM CRC
166; This one doesn't check, if it's really an LVM sector, so check before!
167; In: DS:SI - Sector that needs to get checked...
168; Out: None, CRC updated
169; Destroyed: None
170LVM_UpdateSectorCRC Proc Near Uses ax dx
171 call LVM_GetSectorCRC
172 mov word ptr [si+LocLVM_CRC], ax
173 mov word ptr [si+LocLVM_CRC+2], dx
174 ret
175LVM_UpdateSectorCRC EndP
176
177; Searches for a partition in LVM Information Sector and sets SI to point to
178; the LVM-entry. It will also set CARRY then.
179; In: DX:AX - LBA starting sector of partition to be searched
180; DS:SI - Valid (previously checked) LVM-Information-Sector
181; Out: Carry set, if partition found
182; DS:SI - points to LVM information entry
183; Destroyed: None
184
185; INVALID LVM RECORD WHEN STICK INSERTED !
186
187LVM_SearchForPartition Proc Near Uses cx
188
189IFDEF AUX_DEBUG
190 IF 0
191 DBG_TEXT_OUT_AUX 'LVM_SearchForPartition:'
192 PUSHRF
193 call DEBUG_DumpRegisters
194 ;~ call AuxIO_DumpParagraph
195 ;~ call AuxIO_TeletypeNL
196 POPRF
197 ENDIF
198ENDIF
199
200 cmp byte ptr [si+LocLVM_SignatureStart], LocLVM_SignatureByte0
201 jne LVMSFP_NotFound ; Quick Check, if LVM sector there
202 add si, LocLVM_StartOfEntries
203 mov cl, LocLVM_MaxEntries
204 LVMSFP_Loop:
205 cmp ax, [si+LocLVM_PartitionStart]
206 jne LVMSFP_NextEntry
207 cmp dx, [si+LocLVM_PartitionStart+2]
208 je LVMSFP_FoundIt
209 LVMSFP_NextEntry:
210 add si, LocLVM_LenOfEntry
211 dec cl
212 jnz LVMSFP_Loop
213 LVMSFP_NotFound:
214 clc
215 ret
216 LVMSFP_FoundIt:
217 stc
218 ret
219LVM_SearchForPartition EndP
220
221
222;------------------------------------------------------------------------------
223; Get the LVM drive-letter for a partition (if available)
224;------------------------------------------------------------------------------
225; IN : SI - Pointer to IPT entry for partition
226; OUT : AL - LVM drive-letter
227; : CF=1 - No valid LVM sector found, AL not valid
228; NOTE : Besides the drive-letter, AL can be 0 (LVM hidden) or '*' (LVM auto)
229;------------------------------------------------------------------------------
230LVM_GetDriveLetter Proc Near Uses bx cx dx si di
231
232IFDEF AUX_DEBUG
233 IF 0
234 DBG_TEXT_OUT_AUX 'LVM_GetDriveLetter:'
235 PUSHRF
236 call DEBUG_DumpRegisters
237 ;~ call AuxIO_DumpParagraph
238 ;~ call AuxIO_TeletypeNL
239 POPRF
240 ENDIF
241ENDIF
242
243 ; Save IPT pointer
244 mov di, si
245
246 ; Get the LBA addresses of the MBR or EBR from the IPT entry
247 mov dl, [si+LocIPT_Drive] ; BIOS disk number
248 mov ax, [si+LocIPT_AbsolutePartTable+00h] ; LBA lo MBR/EBR
249 mov bx, [si+LocIPT_AbsolutePartTable+02h] ; LBA hi MBR/EBR
250
251 ; Try to load the corresponding LVM sector
252 mov si, offset [LVMSector] ; Pointer to buffer
253 call DriveIO_LoadLVMSectorXBR ; Try to load LVM sector
254 jc LVM_GetDriveLetter_no_lvm ; No success
255
256 ; Recall IPT pointer
257 mov si, di
258
259 ; Locate the LVM entry for the partition
260 mov ax, [si+LocIPT_AbsoluteBegin+00h] ; LBA lo of partition
261 mov dx, [si+LocIPT_AbsoluteBegin+02h] ; LBA hi of partition
262 mov si, offset [LVMSector] ; Loaded LVM sector
263 call LVM_SearchForPartition ; Locate entry
264 jnc LVM_GetDriveLetter_no_lvm ; Entry not found
265
266 ; Get the LVM drive-letter
267 mov al, [si+LocLVM_VolumeLetter] ; Can be 0,'*',letter
268
269 ; We're done, indicate success and return
270 clc
271 jmp LVM_GetDriveLetter_done
272
273 LVM_GetDriveLetter_no_lvm:
274 ; Indicate no LVM drive-letter found
275 xor ax, ax
276 stc
277
278 LVM_GetDriveLetter_done:
279
280IFDEF AUX_DEBUG
281 IF 0
282 DBG_TEXT_OUT_AUX 'lgdl_lvmsec'
283 PUSHRF
284 call DEBUG_DumpRegisters
285 mov si, offset [LVMSector]
286 call AuxIO_DumpSector
287 ;~ call AuxIO_DumpParagraph
288 ;~ call AuxIO_TeletypeNL
289 POPRF
290 ENDIF
291ENDIF
292
293 ret
294LVM_GetDriveLetter EndP
295
296
297
298;------------------------------------------------------------------------------
299; Set the LVM drive-letter for a partition (if possible)
300;------------------------------------------------------------------------------
301; IN : SI - Pointer to IPT entry for partition
302; : AL - LVM drive-letter
303; OUT : CF=1 - No valid LVM sector found, AL was not valid
304; NOTE : Besides the drive-letter, AL can be 0 (LVM hidden) or '*' (LVM auto)
305;------------------------------------------------------------------------------
306LVM_SetDriveLetter Proc Near Uses bx cx dx si di
307
308 ; THIS IS A DUMMY FUNCTION RETURNING FAILURE
309
310 ; Setting LVM drive-letters is handled by the LVM drive-letter
311 ; reassignment functions. This is because when setting LVM
312 ; drive-letters, duplicates and other conditions need to be checked.
313 ; This dummy is only present because it might be implemented in the
314 ; future as part of the drive-letter reassignment logic.
315
316 ; Just indicate failure and return
317 xor ax, ax
318 stc
319 ret
320LVM_SetDriveLetter EndP
321
322
323
324; Removes a given drive-letter from the whole LVM information sector
325; In: CH - drive-letter (ascii)
326; DS:SI - LVM-Information-Sector
327; Out: LVM-Information-Sector updated (including LVM CRC)
328; Destroyed: None
329LVM_RemoveVolLetterFromSector Proc Near Uses cx
330
331IFDEF AUX_DEBUG
332 IF 0
333 DBG_TEXT_OUT_AUX 'LVM_RemoveVolLetterFromSector:'
334 PUSHRF
335 ;~ call DEBUG_DumpRegisters
336 ;~ call AuxIO_DumpParagraph
337 ;~ call AuxIO_TeletypeNL
338 POPRF
339 ENDIF
340ENDIF
341
342 cmp bptr [si+LocLVM_SignatureStart], LocLVM_SignatureByte0
343 jne LVMRVLFS_Done ; Quick Check, if LVM sector there
344 push si
345 add si, LocLVM_StartOfEntries
346 mov cl, LocLVM_MaxEntries
347 LVMRVLFS_Loop:
348 cmp ch, [si+LocLVM_VolumeLetter]
349 jne LVMRVLFS_NextEntry
350 ; Reset drive-letter, if matched
351 mov bptr [si+LocLVM_VolumeLetter], 0 ; ASSIGN NEXT FREE HERE... (DOET DUBBEL ALS ZELFDE DL ALS SYS)
352 LVMRVLFS_NextEntry:
353 add si, LocLVM_LenOfEntry
354 dec cl
355 jnz LVMRVLFS_Loop
356 pop si
357 call LVM_UpdateSectorCRC
358 LVMRVLFS_Done:
359 ret
360LVM_RemoveVolLetterFromSector EndP
361
362; Reassigns LVM volume driveletter
363; Will remove the drive-letter from any volume that got it currently
364; and finally change the drive-letter of the given partition
365; In: AL - drive-letter
366; DS:SI - points to partition, that needs that driveletter
367; Out: None
368; Destroyed: AX
369
370LVM_DoLetterReassignment Proc Near Uses bx cx dx si di
371
372IFDEF AUX_DEBUG
373 IF 0
374 DBG_TEXT_OUT_AUX 'LVM_DoLetterReassignment:'
375 PUSHRF
376 ;~ call DEBUG_DumpRegisters
377 ;~ call AuxIO_DumpParagraph
378 ;~ call AuxIO_TeletypeNL
379 POPRF
380 ENDIF
381ENDIF
382
383 mov di, si ; Save SI in DI (Partition-pointer)
384 mov ch, al ; and AL in CH (drive-letter)
385 xor bx, bx
386 mov cl, CFG_Partitions
387 or cl, cl
388 jz LVMDLR_SkipRemove
389
390 LVMDLR_RemoveLoop:
391 cmp bptr [PartitionVolumeLetters+bx], ch
392 jne LVMDLR_NextPartition
393 ; One volume that has our wanted drive-letter, so remove it!
394 mov dl, bl
395 call PART_GetPartitionPointer ; DL - partition -> SI
396 ; Now set CurPartition_Location for the DriveIO-functions to work
397 mov ax, wptr [si+LocIPT_AbsolutePartTable]
398 mov wptr [CurPartition_Location+0], ax
399 mov ax, wptr [si+LocIPT_AbsolutePartTable+2]
400 mov wptr [CurPartition_Location+2], ax
401 mov ax, wptr [si+LocIPT_LocationPartTable+1]
402 mov wptr [CurPartition_Location+6], ax
403 mov ah, bptr [si+LocIPT_LocationPartTable+0]
404 mov al, [si+LocIPT_Drive]
405 mov wptr [CurPartition_Location+4], ax
406 call DriveIO_LoadLVMSector ; SI points now to LVM-Sector
407 call LVM_RemoveVolLetterFromSector
408
409 call DriveIO_SaveLVMSector ; Save sector
410
411 LVMDLR_NextPartition:
412 inc bx
413 dec cl
414 jnz LVMDLR_RemoveLoop
415
416 LVMDLR_SkipRemove:
417 ; Set CurPartition_Location information of destination partition
418 mov ax, wptr [di+LocIPT_AbsolutePartTable]
419 mov wptr [CurPartition_Location+0], ax
420 mov ax, wptr [di+LocIPT_AbsolutePartTable+2]
421 mov wptr [CurPartition_Location+2], ax
422 mov ah, bptr [di+LocIPT_LocationPartTable+0]
423 mov al, [di+LocIPT_Drive]
424 mov wptr [CurPartition_Location+4], ax
425 mov ax, wptr [di+LocIPT_LocationPartTable+1]
426 mov wptr [CurPartition_Location+6], ax
427 call DriveIO_LoadLVMSector ; SI points now to LVM-Sector
428 mov ax, wptr [di+LocIPT_AbsoluteBegin]
429 mov dx, wptr [di+LocIPT_AbsoluteBegin+2]
430 mov di, si ; Save SI in DI
431 call LVM_SearchForPartition
432 jnc LVMDLR_DestPartNotFound
433 ; Set new volume letter
434 mov bptr [si+LocLVM_VolumeLetter], ch
435 mov si, di ; SI - LVM Sector again
436 call LVM_UpdateSectorCRC ; Update LVM-CRC now
437
438 call DriveIO_SaveLVMSector ; Save sector
439
440 LVMDLR_DestPartNotFound:
441 ; This here is done for safety, because we misuse CurPartition_Location
442 xor ax, ax
443 mov di, offset CurPartition_Location
444 mov cx, 4
445 rep stosw ; NUL out CurPartition_Location
446 ret
447LVM_DoLetterReassignment EndP
448
449
450; This walks the IPT and for each partition it obtains the LVM drive-letter
451; if available. This drive-letter is then marked as in-use in the Map.
452; The FreeDriveletterMap is used by the drive-letter reassignment function
453; to assign a new drive to a data-partition when a system-partition is booted
454; with the same drive-letter. The original drive-letter for the data-partition
455; is saved so it can be restored later when a system is booted that does not
456; use the drive-letter. Note that there can be multiple system-partitions
457; using the same drive-letter and data-partitions can become system-partition
458; by making them bootable. (and vice versa)
459LVM_ComposeFreeDriveletterMap Proc
460
461; get nr of partitions in IPT
462; for each partition get LVM drive-letter and reset bit in map.
463
464LVM_ComposeFreeDriveletterMap EndP
465
Note: See TracBrowser for help on using the repository browser.