Context Navigation

airboot.asm@ 128

Last change on this file since 128 was 128, checked in by Ben Rietbroek, 8 years ago

New storage method for disk information [v1.1.1-testing]

Having separate areas for BIOS, INT13(X) and LVM information makes
addressing them a bit tedious. Now all disk information is going to be
clustered in one structure with an instance of that structure for each
disk. The disk information will be gathered during the scanning phase
so it can be easily accessed afterwards.

CAUTION:
This is a testbuild !
AirBoot uses the BIOS to access disks and a small coding error can trash
partition tables or other vital disk structures. You are advised to make
backups of TRACK0 and EBRs before using this testbuild. More info at:
https://rousseaux.github.io/netlabs.air-boot/pdf/AirBoot-v1.1.0-manual.pdf

File size: 96.3 KB

Rev	Line
[40]	1	;
[29]	2	; AiR-BOOT (c) Copyright 1998-2008 M. Kiewitz
	3	;
	4	; This file is part of AiR-BOOT
	5	;
	6	; AiR-BOOT is free software: you can redistribute it and/or modify it under
	7	; the terms of the GNU General Public License as published by the Free
	8	; Software Foundation, either version 3 of the License, or (at your option)
	9	; any later version.
	10	;
	11	; AiR-BOOT is distributed in the hope that it will be useful, but WITHOUT ANY
	12	; WARRANTY: without even the implied warranty of MERCHANTABILITY or FITNESS
	13	; FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
	14	; details.
	15	;
	16	; You should have received a copy of the GNU General Public License along with
	17	; AiR-BOOT. If not, see <http://www.gnu.org/licenses/>.
	18	;
[7]	19
[36]	20
[51]	21
	22
	23
	24
	25
	26	;##############################################################################
[46]	27	; AiR-BOOT / DEFINITIONS
[51]	28	;##############################################################################
[7]	29
[46]	30	;
	31	; Include AiR-BOOT Version Information.
[51]	32	; This version-info is defined using simpel EQU's so it can serve as a
	33	; single source for other formats. The AiR-BOOT signature and the
	34	; OS/2 BLDLEVEL use this basic version information.
[46]	35	;
[70]	36	include ../include/version.inc
[30]	37
[46]	38	;
	39	; Include OS/2 BLDLEVEL Information.
[51]	40	; It uses the version-information in VERSION.INC to build it's signature.
[46]	41	;
[60]	42	include bldlevel.inc
[46]	43
[51]	44	;
	45	; Include some macro's.
	46	; This file contains the ORIGIN macro that is used to detect overlaps.
	47	;
[60]	48	include ../include/asm.inc
[46]	49
[51]	50
[30]	51	; We actually don't want to use this directive because it generates extra
	52	; NOP instructions that we can do without.
[31]	53	; TASM also has a bug in that when the .ERR2 directive is used when
	54	; the .386 directive is in effect, the JUMPS directive is also active
	55	; and cannot be turned off.
[30]	56	; NOJUMPS seems to have no effect in this situation.
	57	; In this case 4 NOP instructions are generated after forward referencing jump
	58	; instructions, to allow for automatic recoding by TASM.
	59	; This seems to be a TASM bug. (v2,v3,v4, dunno v5)
[43]	60	IFDEF TASM
	61	;~ JUMPS
	62	ENDIF
[30]	63
[51]	64
[30]	65	;
	66	; If defined then each module is prefixed with it's name.
[51]	67	; This is used for debugging purposes but it also increases code space.
[30]	68	; It should be off in release code.
	69	;
[51]	70	;~ MODULE_NAMES EQU
[30]	71
	72
	73
[51]	74	; -----------------------------------------------------------------------------
	75	; DEBUG
	76	; -----------------------------------------------------------------------------
[30]	77
[31]	78	;
[51]	79	; Enable this to include Debug Modules and enable COM-port debugging.
	80	; To have room for the debug-code, the FX-code can only be enabled
	81	; when AUX_DEBUG is not defined.
[45]	82	;
[71]	83	AUX_DEBUG EQU
[45]	84
[51]	85	;
	86	; To have FX enabled, make sure FX_ENABLE is defined.
	87	; There is no need (for now) to remove Cooper Bars from the setup-menu
	88	; because AiR-BOOT does not crash when enabling Cooper Bars while FX
	89	; is not compiled in. Only TAB to post-screen does not work.
	90	; Way to go Martin !
	91	;
	92	IFNDEF AUX_DEBUG
	93	FX_ENABLED EQU
	94	ENDIF
[45]	95
	96
	97
[51]	98	; -----------------------------------------------------------------------------
	99	; AUX
	100	; -----------------------------------------------------------------------------
[45]	101	;
[31]	102	; bits 7-5 = datarate
	103	; (000=110,001=150,010=300,011=600,100=1200,101=2400,110=4800,111=9600 bps)
	104	; bits 4-3 = parity
	105	; (00 or 10 = none, 01 = odd, 11 = even)
	106	; bit 2 = stop-bits
	107	; (set = 2 stop-bits, clear = 1 stop-bit)
	108	; bits 1-0 = data-bits
	109	; (00 = 5, 01 = 6, 10 = 7, 11 = 8)
	110	;
[30]	111
[31]	112	; 9600 bps, no parity, 1 stop-bit, 8 bits per char
[43]	113	AUX_INIT_PARMS EQU 11100011b
[31]	114
[43]	115	; Com-port for debugging, 0 is disabled
	116	BIOS_COM_PORT EQU 1
	117
[31]	118	; Default word value for BIOS_AuxParms variable
	119	; Note that is has moved since v1.07
[43]	120	BIOS_AUXPARMS_DEFAULT EQU (AUX_INIT_PARMS SHL 8) OR BIOS_COM_PORT
[31]	121
[78]	122	; Default byte value for BIOS_BootDisk variable
[77]	123	BIOS_BOOTDISK_DEFAULT EQU 80h
[43]	124
	125
	126
[51]	127	; -----------------------------------------------------------------------------
	128	; LABELS
	129	; -----------------------------------------------------------------------------
	130	; Address labels after code-move
[76]	131	BootBaseSeg equ 08000h ; Pre-boot, in the low 640K
	132	BootBasePtr equ 0h ; We put our MBR to this location
[51]	133	BootBaseExec equ BootBasePtr+offset MBR_RealStart
[76]	134	StackSeg equ 07000h ; Put the stack below the code
	135	StartBaseSeg equ 00000h ; Pre-boot, we are in low memory
	136	StartBasePtr equ 07C00h ; BIOS starts our MBR at 0:7C00
[7]	137
	138
[30]	139
[51]	140	; -----------------------------------------------------------------------------
	141	; VIDEO
	142	; -----------------------------------------------------------------------------
[30]	143	; Video pages, no INT 10h is used for menu-drawing etc.
[7]	144	VideoIO_Page0 equ 0B800h
	145	VideoIO_Page1 equ 0B900h
	146	VideoIO_Page2 equ 0BA00h
	147	VideoIO_Page4 equ 0BC00h
	148	VideoIO_FXSegment equ 0A000h
	149
[30]	150	; Special line-drawing characters
[69]	151	TextChar_WinLineRight equ 0C4h
	152	TextChar_WinLineDown equ 0B3h
	153	TextChar_WinRep1 equ 0D1h
	154	TextChar_WinRep2 equ 0C5h
	155	TextChar_WinRep3 equ 0CFh
	156	TextChar_WinRep4 equ 0B5h
	157	TextChar_WinRep5 equ 0C6h
	158	TextChar_WinRep6 equ 0D8h
[7]	159
[51]	160
[128]	161	; -----------------------------------------------------------------------------
	162	; DISK INFORMATION
	163	; -----------------------------------------------------------------------------
	164	; Offsets into the DISKINFO structures located in the array [DiskInformation]
[51]	165
[128]	166	; BIOS disk number and MBR flags
	167	LocDISKINFO_DiskNum equ 00h ; BYTE - BIOS disk number (80h etc)
	168	LocDISKINFO_MbrFlags equ 01h ; BYTE - Valid MBR, etc
	169
	170	; BIOS INT13 Info
	171	LocDISKINFO_I13_Secs equ 02h ; WORD - Max 63
	172	LocDISKINFO_I13_Heads equ 04h ; WORD - Max 16 or 255
	173	LocDISKINFO_I13_Cyls equ 06h ; WORD - Max 1024
	174
	175	; BIOS INT13X Info
	176	LocDISKINFO_I13X_Flags equ 08h ; WORD - CHS valid, etc
	177	LocDISKINFO_I13X_SecSize equ 0ah ; WORD - Normally 512 bytes
	178	LocDISKINFO_I13X_Secs equ 0ch ; DWORD - Max 63 ?
	179	LocDISKINFO_I13X_Heads equ 10h ; DWORD - Max 255 ?
	180	LocDISKINFO_I13X_Cyls equ 14h ; DWORD - Max 2_32 (4294967296)
	181	LocDISKINFO_I13X_SecsLBA equ 18h ; QWORD - Max 2^64 (4294967296^2)
	182	LocDISKINFO_I13X_HostBus equ 20h ; 4 bytes
	183	LocDISKINFO_I13X_Interface equ 24h ; 8 bytes
	184
	185	; OS/2 LVM Info
	186	LocDISKINFO_LVM_Flags equ 2ch ; WORD - OS/2 ext geo, etc
	187	LocDISKINFO_LVM_MasterLBA equ 2eh ; DWORD - Max 254
	188	LocDISKINFO_LVM_Secs equ 32h ; DWORD - Max 255
	189	LocDISKINFO_LVM_Heads equ 36h ; DWORD - Max 255
	190	LocDISKINFO_LVM_Cyls equ 3ah ; DWORD - Max 65536
	191
	192	; Custom Info
	193	LocDISKINFO_Flags equ 3eh ; WORD - Custom flags, dunno yet
	194
	195	; Size of this structure
	196	DISKINFO_Size equ 40h ; Size to be allocated
	197
	198
[51]	199	; -----------------------------------------------------------------------------
	200	; PARTITION TABLE
	201	; -----------------------------------------------------------------------------
	202	; Offsets for Partition-Entries in MBR/EBRs
[37]	203	LocBRPT_LenOfEntry equ 16 ; Length of a standard MBR or EPR entry
	204	LocBRPT_Flags equ 0 ; Bootable, Hidden, etc.
[51]	205	LocBRPT_BeginCHS equ 1 ; Packed CHS value
	206	LocBRPT_BeginHead equ 1 ; Start head, usually < 16
	207	LocBRPT_BeginSector equ 2 ; Start sector, max 63 + cyl high bits
	208	LocBRPT_BeginCylinder equ 3 ; Start cylinder 8+2 bits, max 1023
[37]	209	LocBRPT_SystemID equ 4 ; Type of system using the partition
[51]	210	LocBRPT_EndCHS equ 5 ; Packed CHS value
	211	LocBRPT_EndHead equ 5 ; End head, usually < 16
	212	LocBRPT_EndSector equ 6 ; End sector, max 63 + cyl high bits
	213	LocBRPT_EndCylinder equ 7 ; End cylinder 8+2 bits, max 1023
	214	LocBRPT_RelativeBegin equ 8 ; LBA32 address of partition
	215	LocBRPT_AbsoluteLength equ 12 ; 32-bit length of partition
[7]	216
[51]	217	; Signature relative to start of MBR/EBR
	218	LocBR_Magic equ 510 ; Offset of 0AA55h signature
[7]	219
[128]	220
[51]	221	; -----------------------------------------------------------------------------
	222	; LVM RECORD
	223	; -----------------------------------------------------------------------------
[34]	224	; Used as a quick compare in LVM.ASM
[37]	225	LocLVM_SignatureByte0 equ 02h
[30]	226
[34]	227	; Offsets for LVM Information Sector.
	228	; These are relative to the start of the LVM sector.
[37]	229	LocLVM_SignatureStart equ 00h ; 02h,'RMBPMFD' (8 bytes)
	230	LocLVM_CRC equ 08h ; CRC is a DWORD
	231	LocLVM_Heads equ 1ch ; Number of heads
	232	LocLVM_Secs equ 20h ; Sectors per Track
	233	LocLVM_DiskName equ 24h ; Name of the disk
	234	LocLVM_StartOfEntries equ 3ch ; (contains maximum of 4 entries)
	235	LocLVM_LenOfEntry equ 3ch ; Length of an LVM-entry
[30]	236
[34]	237	; An LVM info-sector can contain information on max. 4 partitions.
	238	; All 4 entries will be used when there 4 primary partitions defined.
	239	; For logical partitions, the LVM info-sector is located below the start
	240	; of the logical partition and only one LVM entry is used in that logical
	241	; LVM info-sector.
[37]	242	LocLVM_MaxEntries equ 4 ; Max entries in an LVM-sector
[30]	243
[51]	244
	245	; -----------------------------------------------------------------------------
	246	; LVM ENTRY
	247	; -----------------------------------------------------------------------------
[34]	248	; Offsets for LVM entry.
	249	; These are relative to the start of the entry.
[51]	250	LocLVM_VolumeID equ 00h ; DWORD
	251	LocLVM_PartitionID equ 04h ; DWORD
	252	LocLVM_PartitionSize equ 08h ; DWORD
	253	LocLVM_PartitionStart equ 0ch ; DWORD
[37]	254	LocLVM_OnBootMenu equ 10h ; is on IBM BM Bootmenu
	255	LocLVM_Startable equ 11h ; is Startable (newly installed system)
[51]	256	LocLVM_VolumeLetter equ 12h ; Drive Letter for partition (C-Z or 0)
	257	LocLVM_Unknown equ 13h ; unknown BYTE (can be used ?)
	258	LocLVM_InstallLetter equ 13h ; unknown BYTE (can be used ?)
[37]	259
[71]	260	; Truncated to 11 chars when displayed in menu.
[34]	261	; MiniLVM sets both to the same value.
	262	; Also, MiniLVM uses a 0-byte terminator, so the maximum length is 19d.
	263	; Same goes for LocLVM_DiskName.
[45]	264	; These offsets are relative to an LVM entry.
[37]	265	LocLVM_VolumeName equ 14h ; 20 bytes
	266	LocLVM_PartitionName equ 28h ; 20 bytes (Used in menu)
[30]	267
[45]	268	; LVM constants.
[51]	269	LocLVM_LabelLen equ 14h ; Length of LVM Label (Disk/Part/Vol)
	270	LocLVM_DiskNameLen equ 14h ; Length of LVM DiskName
	271	LocLVM_VolumeNameLen equ 14h ; Length of LVM VolumeName
	272	LocLVM_PartitionNameLen equ 14h ; Length of LVM PartitionName
[30]	273
[34]	274
[51]	275	; -----------------------------------------------------------------------------
	276	; AiR-BOOT IPT
	277	; -----------------------------------------------------------------------------
[7]	278	; Offsets for IPT (Internal Partition Table)
[51]	279	LocIPT_MaxPartitions equ max_partitions ; 45 in v1.07+
[37]	280	LocIPT_LenOfSizeElement equ 6 ; Size of one Size-Element
	281	LocIPT_LenOfIPT equ 34 ; Length of an IPT-entry
	282	LocIPT_Serial equ 0 ; Serial from MBR ?
	283	LocIPT_Name equ 4 ; Name from FS or LVM (part/vol)
	284	LocIPT_Drive equ 15 ; Drive-ID (80h,81h)
	285	LocIPT_SystemID equ 16 ; Partition-Type (06,07,etc)
[51]	286	LocIPT_Flags equ 17 ; AiR-BOOT Flags for part (see below)
[37]	287	LocIPT_BootRecordCRC equ 18 ; CRC of Boot-Record
	288	LocIPT_LocationBegin equ 20 ; Begin of Partition
	289	LocIPT_LocationPartTable equ 23 ; PartitionTable of Partition
	290	LocIPT_AbsoluteBegin equ 26 ; Absolute Sector of Begin
	291	LocIPT_AbsolutePartTable equ 30 ; Absolute Sector of PartTable
[7]	292
[38]	293
[30]	294	; AiR-BOOT IPT-Flags
[37]	295	LocIPT_DefaultFlags equ 00000011b ; Don't know if boot-able :)
[51]	296	LocIPT_DefaultNonBootFlags equ 00000010b ; VIBR Detection is always on
[7]	297
[37]	298	Flags_Bootable equ 00000001b
	299	Flags_VIBR_Detection equ 00000010b
	300	Flags_HideFeature equ 00000100b
	301	Flags_DriveLetter equ 00001000b ; OS/2 FAT16/HPFS only
[46]	302	Flags_ExtPartMShack equ 00010000b ; Ext. Partition M$-Hack req ?
[37]	303	Flags_NoPartName equ 01000000b
	304	Flags_NowFound equ 10000000b ; temp only in OldPartTable
	305	Flags_SpecialMarker equ 10000000b ; temp only for HiddenSetup
[7]	306
[37]	307	FileSysFlags_BootAble equ 00000001b ; Is this Partition boot-able ?
	308	FileSysFlags_FAT32 equ 00010000b ; FAT 32 specific name getting
	309	FileSysFlags_NoName equ 00100000b ; No Name - use PartitionName
	310	FileSysFlags_DriveLetter equ 01000000b ; DriveLetter Feature possible
[7]	311
[51]	312
	313	; -----------------------------------------------------------------------------
	314	; AiR-BOOT HPT
	315	; -----------------------------------------------------------------------------
	316	; Hidden Partition Table
	317	; Length of an HPT-entry ((45 * 6 bits-per-part) / 8) * 45
	318	; 33.75 = 34 bytes for HPT-entry, coincidently same as length of IPT-entry.
	319	; Packed table !
	320	LocHPT_LenOfHPT equ 34
	321
	322
	323	; -----------------------------------------------------------------------------
	324	; NAVIGATION KEYS
	325	; -----------------------------------------------------------------------------
[30]	326	; Navigation keys
[37]	327	Keys_Up equ 48h
	328	Keys_Down equ 50h
	329	Keys_Left equ 4Bh
	330	Keys_Right equ 4Dh
	331	Keys_PageUp equ 49h
	332	Keys_PageDown equ 51h
	333	Keys_GrayPlus equ 4Eh
	334	Keys_GrayMinus equ 4Ah
	335	Keys_Plus equ 1Bh
	336	Keys_Minus equ 35h
	337	Keys_ENTER equ 1Ch
	338	Keys_ESC equ 1h
	339	Keys_F1 equ 3Bh
	340	Keys_F10 equ 44h
[51]	341	Keys_C equ 2Eh ; Add. Check for Ctrl!
[37]	342	Keys_Y equ 2Ch
	343	Keys_Z equ 15h
	344	Keys_N equ 31h
	345	Keys_TAB equ 0Fh
	346	Keys_Delete equ 53h
	347	Keys_Backspace equ 0Eh
	348	Keys_Space equ 20h
[7]	349
[37]	350	Keys_Flags_EnterSetup equ 1100b ; Strg+Alt (AL)
[7]	351
	352
[51]	353	; -----------------------------------------------------------------------------
	354	; MISC
	355	; -----------------------------------------------------------------------------
	356	; Initial value for the FreeDriveletterMap
	357	; Meaning A,B not free; C-Z free, rest unused. (right to left)
	358	; Each partition with an assigned drive-letter clears a bit in this map.
	359	; (Not implemented yet)
	360	InitialFreeDriveletterMap equ 00000011111111111111111111111100b
[46]	361
[51]	362	;
	363	; The first harddisk is BIOS coded 80h.
	364	; This makes a total of 128 disks that could be supported using this coding.
	365	; This value is used to store disk-information and this info is allocated
	366	; in the BSS. 64 disks ought to be enough for everybody :-)
	367	;
	368	MaxDisks equ 64
[46]	369
	370
	371
[51]	372
	373
	374
	375	;##############################################################################
[46]	376	; AiR-BOOT / MAIN-CODE
[51]	377	;##############################################################################
[46]	378
[51]	379	;
[43]	380	; Because of the TASM-bug the processor had to be changed to turn JUMPS
	381	; off. Existing movzx instructions were replaced with 286 equivalent code.
	382	; Out of range relative jumps have been recoded.
[51]	383	;
	384	; Since version 1.0.8, JWasm is the preferred assembler and Tasm will be
	385	; dropped. Also, the chances of AiR-BOOT being used on a 286-machine are
	386	; very slim, so a future version will revert back to .386 and also incorporate
	387	; 32-bit code. This will enable some enhanced constructs such as scaled
	388	; indexing, bit-instructions, 32-bit registers and what not.
	389	;
[43]	390	.286
[30]	391
[51]	392	;
	393	; For Tasm, MODEL is needed for the USES directive to work.
	394	; So always use a model when assembling with Tasm otherwise registers on
	395	; function calls that use USES are not saved and restored.
	396	; The model itself, has no real effect because we generate a binary image
	397	; and not a segmented executable.
	398	; For the other assemblers we define no model to get rid of the default C/C++
	399	; segments for future object-linked versions of AiR-BOOT.
	400	;
[43]	401	IFDEF TASM
[46]	402	;~ .model large, basic
[43]	403	.model tiny,c
	404	ENDIF
[37]	405
	406	;
[51]	407	; The below is used to switch between the original 1-segment (code_seg) layout
	408	; and the new 2-segment (code_seg and bss_data) layout.
	409	; It will be removed in future versions.
[37]	410	; The 2-segment layout was needed for JWasm because it does not treat
[51]	411	; db ? at the end of a code segment as bss-data.
[37]	412	; Therefore, a true BSS segment is now used.
[51]	413	; Both the code_seg and the bss_data are grouped to the logical AIRBOOT
[37]	414	; segment.
	415	; Note that this influences the offsets in the BSS in the list-file and
	416	; the wdis disassembly file (.WDA).
	417	; They are now segment-relative. The true offset is resolved at link
	418	; time.
	419	;
[43]	420	SEGMENTED EQU
[37]	421
[51]	422	IFDEF SEGMENTED
	423	AIRBOOT GROUP LDRIMAGE,VOLATILE
	424	ENDIF
[37]	425
[51]	426	; Our code-segment starts here.
	427	LDRIMAGE SEGMENT USE16 PUBLIC 'CODE'
[7]	428
[51]	429	IFDEF SEGMENTED
	430	ASSUME CS:AIRBOOT, DS:AIRBOOT, ES:nothing, SS:nothing
	431	ELSE
	432	ASSUME CS:LDRIMAGE,DS:LDRIMAGE,ES:nothing, SS:nothing
	433	ENDIF
[30]	434
[51]	435
	436
[31]	437	;==============================================================================
[51]	438	; Sector 1
	439	;==============================================================================
[30]	440
[51]	441	;------------------------------------------------------------------------------
[46]	442	; We are not a .COM file at 100h but a BINARY image
	443	; of which only the 1st sector gets loaded at 0000:07c00h
	444	; by the BIOS. The code in this 1st sector is position
	445	; independent and moves itself to a new location at 8000:0000h.
	446	; Then it jumps to a new entry-point and loads the rest of
	447	; the image to the new location.
[51]	448	org 00000h
	449	;------------------------------------------------------------------------------
[30]	450
[46]	451
	452	;
[51]	453	; Since AiR-BOOT is a boot-loader residing in track0, the first 512 bytes
	454	; have the layout of a Master Boot Record (MBR). When AiR-BOOT get's installed,
	455	; the first 512 bytes of this code get's merged with the Partition Table.
	456	; The rest is installed in the remaining sectors with sector 62 (LBA 61)
	457	; being the last sector used by AiR-BOOT. Sector 63 is reserved for IBM LVM.
	458	; The last sector used by AiR-BOOT is a copy of the MBR that AiR-BOOT makes
	459	; every time a system gets booted.
[46]	460	;
[30]	461
[46]	462	;
[51]	463	; Due to the addition of an extra 'I13X' sugnature and code to preserve the
	464	; values of the registers on entry, the MBR-code has become a bit messy.
	465	; This will be cleaned-up in future versions.
	466	;
	467
	468	;
[46]	469	; Martin had a short jump followed by the AiRBOOT signature at first.
	470	; Then he encountered strange behaviour by some M$ operating-systems
	471	; if the the first insruction was not a CLI.
[30]	472	; But there was no room to insert the CLI and of course he did not want to
[51]	473	; change the location of the AiR-BOOT signature.
[30]	474	; He solved this by inserting the M$ needed CLI at offset 0 followed by a short
[51]	475	; jump that uses the 'A' of the AiR-BOOT signature as the jump displacement.
[46]	476	;
[30]	477
	478
[51]	479	; -----------------------------------------------------------------------------
	480	; FIRST ENTRY-POINT
	481	; -----------------------------------------------------------------------------
[52]	482	; BOOKMARK: FIRST ENTRY-POINT (Invoked by BIOS)
[51]	483	; ######################################################
	484	; # ENTRY-POINT WHERE THE BIOS TRANSFERS CONTROL TO US #
	485	; ######################################################
[37]	486	AiR_BOOT:
[51]	487	; Some M$ operating systems need a CLI
	488	; here otherwise they will go beserk
	489	; and will do funny things during
	490	; boot phase, it's laughable!
	491	MBR_1stOpc: cli
[30]	492
[51]	493	; JMP-Short -> MBR_Start
	494	; Uses the 'A' from the signature as the displacement !
	495	MBR_JmpOpc db 0EBh
[7]	496
[51]	497	; ID String, Date (DD,MM,CC,YY), Version Number, Language ID
	498	;~ db 'AiRBOOT',24h,02h,20h,12h,01h,08h,TXT_LanguageID
	499	MBR_ABSig: InsertAirbootSignature TXT_LanguageID
[37]	500
[51]	501	; Total Code Sectors Count.
	502	; Actual value will be inserted by FIXCODE.
	503	MBR_CodeSecs db 1
[37]	504
[51]	505	; Total Code Sectors Count, dynamically calculated.
	506	;~ db (code_end-$)/512
[37]	507
[51]	508	; Check-Sum for Code
	509	MBR_CheckCode dw 0
[37]	510
	511
	512
[51]	513	; -----------------------------------------------------------------------------
	514	; THIRD ENTRY-POINT
	515	; -----------------------------------------------------------------------------
[52]	516	; BOOKMARK: THIRD ENTRY-POINT (Relocate code)
[30]	517	;
	518	; No single instruction below should be changed, added or removed in the code
	519	; below as this will cause the jump-link to go haywire.
[31]	520	;
[37]	521	MBR_Start:
[51]	522	;
	523	; When we arrive here, no registers have been used yet.
	524	; So, they still contain the values the BIOS left in them.
	525	; We want to preserve those value's for later inspection
	526	; by putting them on the stack.
	527	;
[30]	528
[51]	529	; No space for this instruction here.
	530	; We'll enable interrupts later.
	531	;sti ; This opcode is dedicated to:
	532	; =MICROSOFT JUMP DEPARTMENT=
	533
	534	; Push all registers with values provided by the BIOS
	535	; on the stack.
	536	pusha
	537
	538	;
[37]	539	; Setup some base stuff
	540	; AX got loaded wrongly for debug, changed the instructions
	541	; without modifying the number of bytes.
[51]	542	; Don't comment-out the redundant instruction below because it
[37]	543	; will change the number of bytes and break the jump-chain.
[51]	544	;
	545
	546	; The segment we are moving ourself from (NOT USED)
	547	;mov ax, StartBaseSeg
[37]	548	;mov ds, ax
[51]	549
	550	; Make sure DS points to CS.
[37]	551	push cs
	552	pop ds
[51]	553
	554	; Setup the source and destination for the code move.
	555	mov si, StartBasePtr ; The offset we move ourself from
	556	mov ax, BootBaseSeg ; The target segment we move to
[37]	557	mov es, ax
[51]	558	;mov di, BootBasePtr ; The target offset we move to
	559	; Changed the instruction to make room.
	560	; So, BootBasePtr is not used !
	561	; The offset in the target segment is assumed to be 0000
	562	; anyway.
	563	xor di,di
	564	;sti
[30]	565
[76]	566	; Size of the MBR in words.
[37]	567	mov cx, 256 ; Pre-boot environment
[30]	568
[37]	569	;
[51]	570	; This moves this 512-byte sector, loaded by the BIOS at
	571	; 0000:7c00 to 8000:0000.
[37]	572	;
[51]	573	cld
[37]	574	rep movsw
[30]	575
[77]	576	; Temporary save SS and SP so we still have access to this
	577	; stack after we have setup our own.
	578	mov cx,ss
	579	mov bx,sp
	580
[51]	581	; Code an intersegment jump to the new location.
	582	; jmp BootBaseSeg:BootBaseExec
	583	; Note that DX:BX containts the old SS:SP.
[37]	584	db 0EAh
[46]	585	dw BootBaseExec ; This is MBR_RealStart + BootBasePtr
	586	dw BootBaseSeg ; This is 08000h
[7]	587
[30]	588
[51]	589
	590
	591	; -----------------------------------------------------------------------------
	592	; SIMPLE MBR FUNCTIONS
	593	; -----------------------------------------------------------------------------
[30]	594	;
	595	; Some MBR-functions to provide absolute minimum functionality.
	596	;
	597
	598	;
[52]	599	; BOOKMARK: Halt System
[30]	600	; Entry-point for halting the system.
	601	;
[7]	602	MBR_HaltSystem:
[37]	603	mov ax, 8600h
	604	xor cx, cx
	605	mov dx, 500
[46]	606	int 15h ; Wait to display the whole screen :]
	607	MBR_HaltSys:
[81]	608	;~ cli
[37]	609	jmp MBR_HaltSys
[7]	610
[31]	611
[77]	612	; Base of some MBR variables
[45]	613	ORIGIN 0003Ch
	614
[77]	615	MBR_Variables:
	616
[51]	617	; Comport settings.
	618	; It had to be moved to create room for the double I13X signature.
[37]	619	; It cannot be in the config-area (sector 55)
[43]	620	; because that area is crc-protected and would not allow 'poking'.
	621	BIOS_AuxParms dw BIOS_AUXPARMS_DEFAULT
[31]	622
[77]	623	; When the BIOS turns over control to the MBR, DL holds the BIOS disk-number
	624	; from which the boot was initiated. This would normally be 80h, corresponding
	625	; to the first physical disk. However, some modern BIOSses can directly boot
	626	; from other disks, so AirBoot cannot assume being loaded from 80h anymore.
	627	; So here we store the BIOS disk-number passed in DL when AirBoot got control.
	628	BIOS_BootDisk db BIOS_BOOTDISK_DEFAULT ; Get overwritten with 'DL'
[51]	629
[77]	630	; Reserved space for future variables.
[51]	631	IFDEF AUX_DEBUG
[77]	632	reserved db 5 dup('X')
[51]	633	ELSE
[77]	634	reserved db 5 dup(0)
[51]	635	ENDIF
[30]	636
[45]	637
[51]	638
	639
	640	; -----------------------------------------------------------------------------
	641	; SECOND ENTRY-POINT
	642	; -----------------------------------------------------------------------------
[77]	643
[37]	644	;
	645	; We arrive here after the first jump using the 'A' of the
[51]	646	; AiR-BOOT signature. So we ensure the jump is always at
	647	; this offset. We jump here, because Martin needed to
	648	; insert a CLI on start and did not want to change the
	649	; AiR-BOOT signature because of Microsoft inventions...
[45]	650	;
	651	ORIGIN 00044h
[37]	652
	653	; Jump again...
[51]	654	; This time to the code that relocates to 8000:0000.
[52]	655	; BOOKMARK: SECOND ENTRY_POINT (Skipped over AB signature)
[37]	656	jmp MBR_Start
	657
[30]	658	;
	659	; Entry-point when loading fails.
	660	;
[37]	661	db 'LOAD ERROR!', 0
	662	MBR_LoadError Proc Near
	663	mov si, offset $-12
	664	push cs
	665	pop ds
	666	call MBR_Teletype
	667	MBRLE_Halt:
	668	jmp MBRLE_Halt
	669	MBR_LoadError EndP
[7]	670
[30]	671	;
	672	; Entry-point when saving fails.
	673	;
[37]	674	db 'SAVE ERROR!', 0
	675	MBR_SaveError Proc Near
	676	mov si, offset $-12
	677	push cs
	678	pop ds
	679	call MBR_Teletype
	680	MBRSE_Halt:
	681	jmp MBRSE_Halt
	682	MBR_SaveError EndP
[7]	683
[30]	684
	685	; Put text on the screen using the BIOS tele-type function.
	686	; No attributes like color are supported.
[7]	687	; In: SI - Pointer to begin of string (EOS is 0)
	688	; Destroyed: SI
[37]	689	MBR_Teletype Proc Near Uses ax bx cx
	690	mov ah, 0Eh
	691	mov bx, 7
	692	MBRT_Loop:
	693	lodsb
	694	or al, al
	695	jz MBRT_End
	696	int 10h
	697	jmp MBRT_Loop
	698	MBRT_End:
	699	ret
	700	MBR_Teletype EndP
[7]	701
[30]	702	;
	703	; Rousseau: DO NOT ADD CODE TO THIS SECTION !
	704	;
	705
[52]	706	; In: BX - Base Check
	707	; DS:SI - Pointer to 512-byte-area to be included
	708	; Out: BX - Base Check Result
[7]	709	; Destroyed: SI will get updated (+512)
[37]	710	MBR_GetCheckOfSector Proc Near Uses ax cx
	711	mov cx, 256
	712	MBRGCOS_Loop:
	713	lodsw
	714	xor ax, 0BABEh
	715	xor bx, ax
	716	loop MBRGCOS_Loop
	717	or bx, bx
	718	jnz MBRGCOS_NoFixUp
	719	mov bx, 1 ; dont allow 0, cause 0 == empty
	720	MBRGCOS_NoFixUp:
	721	ret
	722	MBR_GetCheckOfSector EndP
[7]	723
[30]	724
	725
	726
	727
	728
[51]	729	; -----------------------------------------------------------------------------
	730	; ENTRY-POINT OF MOVED CODE
	731	; -----------------------------------------------------------------------------
	732
[30]	733	;
[51]	734	; When we arrive here we are running at 8000:0000.
[77]	735	; CX:BX contains the SS:SP of the old stack.
[30]	736	;
	737
[51]	738	;
	739	; This is where the rest of AiR-BOOT gets loaded from track0.
	740	;
[52]	741	; BOOKMARK: Running at relocated position (Load additional sectors)
[31]	742	;------------------------------------------------------------------------------
[7]	743	MBR_RealStart:
[51]	744	;
	745	; Setup new stack and other segment registers.
	746	;
[37]	747	mov ax, StackSeg ; 07000h, below the moved code
	748	mov ss, ax
	749	mov sp, 7FFEh ; Even is better
[51]	750	push es ; ES holds segment where we moved to
[52]	751	pop ds ; Set DS=ES to Code Segment
[30]	752
[51]	753	;
[77]	754	; Push the old SS:SP which was saved in CX:BX on the new stack.
[51]	755	;
[77]	756	push cx ; Old SS
[51]	757	push bx ; Old SP
[43]	758
[77]	759	;
	760	; Store the BIOS disk-number AirBoot was loaded from.
	761	;
	762	mov [BIOS_BootDisk], dl
[51]	763
[37]	764	; Load the configuration-sectors from disk.
[51]	765	; These are the main configuration sector and the various
	766	; tables that follow it upto but not including the MBR backup.
[77]	767	mov bx, offset Configuration ; Location in RAM
	768	mov cx, 0037h ; Config sector is at 55d
	769	mov al, (MBR_BackUpMBR - Configuration) / 200h
	770	mov ah, 02h
	771	; DL is already loaded with BIOS disk-number
	772	int 13h ; Call BIOS service
[37]	773	jnc MBR_ConfigCopy_NoError
[30]	774
[37]	775	; Some error occured
	776	MBR_ConfigCopy_LoadError:
[77]	777	jmp MBR_LoadError ; Will Abort BootUp
[30]	778
[77]	779	; Load the code-sectors from disk.
	780	; [MBR_CodeSecs] is filled in by the FIXCODE helper that post
	781	; processes the AIRBOOT loader image after it has been built.
[37]	782	MBR_ConfigCopy_NoError:
[77]	783	mov bx, offset FurtherMoreLoad ; Directly after MBR
	784	mov cx, 0002h ; Start at 2nd sector
	785	mov al, [MBR_CodeSecs] ; Number of code sectors
	786	mov ah, 02h ; Read sectors
	787	; DL is already loaded with BIOS disk-number
	788	int 13h ; Call BIOS service
[37]	789	jnc MBR_RealStart_NoError
[31]	790
[77]	791	; Some error occured
	792	jmp MBR_LoadError ; Will Abort BootUp
[31]	793
[77]	794
	795	; I13X Signatures
	796	ORIGIN 000d0h
	797
[37]	798	; [v1.05+]
	799	; Signature for IBM's LVM to detect our "powerful" features ;)
[45]	800	;
[37]	801	; [v1.0.8+]
	802	; Reworked MBR code to be able to create a
	803	; double 'I13X' signature.
	804	; MBR's created with LVM eCS v1.x have the signature at 0d5h
	805	; MBR's created with LVM eCS v2.x have the signature at 0d0h
	806	; See eCS bugtracker issue #3002
[45]	807	;
[37]	808	; Update: These are actually MOV EAX,'X31I' instructions
	809	; in the eCS LVM MBR-code. They are at different places in
[51]	810	; the v1.x and v2.x LVM MBR-code. Other code might depend on
	811	; their presence. Let's protect their location.
[37]	812	db 'I13X',0,'I13X',0
[31]	813
[30]	814
[37]	815	MBR_RealStart_NoError:
	816	; Now Check Code with CheckSum
	817	mov si, offset FurtherMoreLoad
[30]	818
[37]	819	;movzx cx, bptr ds:[10h]
	820	mov cl, ds:[10h]
	821	mov ch,0
[31]	822
[51]	823	; Claculate checksum
[37]	824	xor bx, bx
	825	MBR_RealStart_CheckCodeLoop:
	826	call MBR_GetCheckOfSector
	827	loop MBR_RealStart_CheckCodeLoop
[31]	828
[72]	829	; Verify checksum
[37]	830	cmp MBR_CheckCode, bx
[72]	831	;~ je MBR_RealStart_CheckSuccess ; CRC verified
	832	jmp MBR_RealStart_CheckSuccess ; Ignore CRC
[7]	833
[72]	834	; Oops, checksum mismatch -- halt the system
[37]	835	mov si, offset TXT_ERROR_Attention
	836	call MBR_Teletype
	837	mov si, offset TXT_ERROR_CheckCode
	838	call MBR_Teletype
	839	mov si, offset TXT_ERROR_CheckFailed
	840	call MBR_Teletype
	841	jmp MBR_HaltSystem
[51]	842
	843
	844	;
	845	; OK, all loading went fine so the rest of the code
	846	; is present now, so we jump to it.
	847	; The old SS:SP is still on the stack.
	848	;
[37]	849	MBR_RealStart_CheckSuccess:
	850	jmp AiR_BOOT_Start
[30]	851
	852
	853
	854
[37]	855
[31]	856	;------------------------------------------------------------------------------
[60]	857	include text/txtmbr.asm ; All translateable Text in MBR
[31]	858	;------------------------------------------------------------------------------
[30]	859
[77]	860	; Disk Signature
	861	ORIGIN 001B8h
[30]	862
	863
[37]	864	; Disk Signature
	865	; Note that in an LVM 2.x MBR this collides
	866	; with the dummy PTE that it uses to look for IBM-BM
	867	; on the second harddisk.
[52]	868	; AiR-BOOT installer will merge the field
	869	; from the MBR it replaces.
[51]	870	MBR_DrvSig db 'DSIG'
[31]	871
[45]	872	; Unused word at 01BCh.
	873	; An LVM 2.x MBR puts 0CC33h here.
[52]	874	; AiR-BOOT installer will merge the field
	875	; from the MBR it replaces.
[51]	876	MBR_Spare dw '$$'
[35]	877
	878
[45]	879	; Partition Table.
	880	ORIGIN 001BEh
[43]	881
[45]	882	; The 4 entries just for show.
[52]	883	; AiR-BOOT installer will merge them from the MBR it replaces.
[51]	884	MBR_PartTable:
[37]	885	db 16 dup('0')
	886	db 16 dup('1')
	887	db 16 dup('2')
	888	db 16 dup('3')
	889
	890	; Boot Sigbature
[51]	891	MBR_Sig dw 0aa55h
[37]	892
[30]	893
	894
	895
[37]	896
[45]	897
[51]	898
[31]	899	;==============================================================================
[51]	900	; Sector 2
	901	;==============================================================================
[30]	902
[51]	903	; -----------------------------------------------------------------------------
	904	; FILE-SYSTEM TABLES
	905	; -----------------------------------------------------------------------------
	906
[77]	907	; First sector the rest of the loader image
[45]	908	ORIGIN 00200h
[30]	909
[31]	910	;
	911	; Everything beyond this point is loaded on startup
	912	; and is NOT existant at first
	913	;
[7]	914	FurtherMoreLoad:
[30]	915
	916	;
	917	; Filesystem table correlating id with name.
	918	;
	919
[37]	920	; first Normal-Partition-ID, Hidden-Partition-ID
[51]	921	; and Default-Partition-Flags.
[37]	922	; 01h -> Boot-Able
	923	; 10h -> FAT32 - Name Getting Scheme
	924	; 20h -> No Name To Get (use Partition Name from IPT)
	925	; 40h -> 'L' flag possible
[7]	926	db 'AiRSYS-TABLE'
[37]	927	FileSysIDs db 01h, 11h,01h, 04h,014h,01h, 06h,016h,41h, 0Eh,00Eh,01h
[29]	928	db 07h, 17h,41h, 08h,017h,21h, 35h,035h,20h,0FCh,017h,41h
	929	db 09h, 19h,11h, 0Bh,01Bh,11h, 0Ch,01Ch,11h,0EBh,0EBh,01h
[7]	930	db 63h, 63h,21h, 81h,081h,21h, 83h,083h,21h, 40h,040h,21h
	931	db 0A5h,0A5h,21h,0A6h,0A6h,21h, 82h,082h,20h,0A7h,0A7h,21h
	932	db 63h, 63h,21h, 4Dh,04Dh,21h, 4Eh,04Eh,21h, 4Fh,04Fh,21h
	933	db 01h, 01h,01h, 01h,001h,01h, 01h,001h,01h, 01h,001h,01h
	934	db 01h, 01h,01h, 01h,001h,01h, 01h,001h,01h, 01h,001h,01h
	935	db 01h, 01h,01h, 01h,001h,01h, 01h,001h,01h, 01h,001h,01h
	936	db 01h, 01h,01h,0FDh,0FDh,20h, 84h,084h,20h,0A0h,0A0h,20h
	937	db 0Ah, 0Ah,20h,0FEh,0FEh,21h,0FFh,0FFh,21h, 00h,000h,21h
	938	db 16 dup (0)
	939
[46]	940	FileSysNames db 'FAT12 ', 'FAT16 ', 'FAT16Big', 'FAT16Big'
	941	db 'HPFS ', 'NTFS ', 'LVM-Data', 'JFS '
	942	db 'FAT32 ', 'FAT32 ', 'FAT32 ', 'BeOS '
	943	db 'Unix ', 'Minix ', 'Linux ', 'Venix ' ; x row ;)
	944	db 'BSD/386 ', 'OpenBSD ', 'LinuxSwp', 'NeXTSTEP'
	945	db 'GNU HURD', 'QNX ', 'QNX ', 'QNX '
	946	db ' ', ' ', ' ', ' '
	947	db ' ', ' ', ' ', ' '
	948	db ' ', ' ', ' ', ' '
	949	db ' ', 'Kernel ', ' ', '0V-Award'
	950	; db 'OS/2 Man', 'via BIOS', 'Floppy ', 'Unknown '
	951	db 'OS2-BMGR', 'via BIOS', 'Floppy ', 'Unknown '
[7]	952	; -> 44 Partition-Types
	953
[30]	954
	955
	956
[37]	957
	958
[51]	959	;==============================================================================
	960	; Sector 3
	961	;==============================================================================
[30]	962
[51]	963	; -----------------------------------------------------------------------------
	964	; ENTRY-POINT AFTER LOADING THE REST OF THE CODE
	965	; -----------------------------------------------------------------------------
[30]	966
[77]	967	; The entry-point jumped to from the MBR code
[51]	968	ORIGIN 00400h
[30]	969
[43]	970
[77]	971	;##############################################################################
	972	;# AiR_BOOT_Start :: This is where the real work begins #
	973	;# -------------------------------------------------------------------------- #
	974	;# At this point, all of AirBoot is loaded, including its configuration. #
	975	;# First, some setup is done, which includes the initialization of variables #
	976	;# in the BSS. After that, disks are scanned for partitions and the required #
	977	;# house keeping is done to incorporate changes from the previous boot. Then #
	978	;# the partition list is prepared and the menu is presented. #
	979	;##############################################################################
[52]	980	; BOOKMARK: AiR_BOOT_Start (AiR-BOOT now completely loaded)
[36]	981	AiR_BOOT_Start:
[30]	982
[36]	983
[51]	984	;
	985	; Enable interrupts.
	986	;
	987	sti
[36]	988
	989	;
[51]	990	; Pop the old SS:SP from the stack and save it in the BSS.
[52]	991	; Note that this is outside the normal variable area that gets cleared.
	992	; This allows AiR-BOOT to restart itself when debugging and come-up
	993	; with access to the original values of registers the BIOS passed.
[51]	994	;
	995	pop [OldSP]
	996	pop [OldSS]
	997
	998
[117]	999	; Verify we still got the BIOS disk in DL
	1000	IFDEF AUX_DEBUG
	1001	IF 1
[123]	1002	DBG_TEXT_OUT_AUX '## AiR_BOOT_Start ##'
	1003	PUSHRF
[117]	1004	call DEBUG_DumpRegisters
[123]	1005	POPRF
[77]	1006	ENDIF
[117]	1007	ENDIF
[77]	1008
[117]	1009
[51]	1010	; -----------------------------------------------------------------------------
	1011	; IBM-BM BOOT PREPARATION
	1012	; -----------------------------------------------------------------------------
	1013	;
[36]	1014	; Since v1.0.8, AiR-BOOT is able to chainload IBM-BM.
	1015	; When IBM-BM resides above the 1024-cylinder limit, the 'I13X'
	1016	; signature is required at 3000:0000, FS needs to contain 3000h
	1017	; and the 32-bit LBA address needs to follow the 'I13X' signature.
	1018	; For booting IBM-BM from the second disk, a copy of the MBR of the
	1019	; first disk is also required at 0000:7E00.
	1020	; This information is derived from the eCS 2.x LVM MBR.
	1021	;
	1022	; So, now is a good time to copy the MBR of the first disk to
	1023	; 0000:7E00 in case the partition that will be started is IBM-BM.
	1024	; This copy is located at 8000:0000 and DS already points to this
[51]	1025	; segment. The 'I13X' signature and FS will be setup later.
[36]	1026	;
[37]	1027	pusha ; Save all the general purpose regs
	1028	push es ; We need ES too, so save its value
	1029	xor ax,ax ; Segment 0000h
	1030	mov es,ax ; Make ES point to it
	1031	mov si,offset BootBasePtr ; Start of AiR-BOOT which has the MBR
	1032	mov di,7e00h ; Destination for the MBR for IBM-BM
	1033	mov cx,100h ; 256 words = 512 bytes
	1034	cld ; Direction from low to high
	1035	rep movsw ; Copy the 256 words of the MBR
	1036	pop es ; Restore previous value of ES
	1037	popa ; Restore all the general purpose regs
[36]	1038
	1039
[51]	1040	; -----------------------------------------------------------------------------
	1041	; PRECRAP
	1042	; -----------------------------------------------------------------------------
[36]	1043
[51]	1044	;
	1045	; First it clears the BSS area.
[52]	1046	; Note that the old SS:SP is stored outside this area so this
[51]	1047	; does not get lost.
	1048	; Then initialize various runtime variables and structures.
	1049	;
[52]	1050	; BOOKMARK: Pre Crap
[51]	1051	call PRECRAP_Main
	1052	; Number of harddisks and other system-info is now known.
[43]	1053
[117]	1054	;!
	1055	;! DEBUG_BLOCK
	1056	;! Let's see what the BIOS supplied us with...
	1057	;! Uncomment below to activate.
	1058	;!
	1059	IFDEF AUX_DEBUG
	1060	IF 0
	1061	pushf
	1062	pusha
[45]	1063
[117]	1064	; Print title.
	1065	mov si,offset [bios_reg]
	1066	call AuxIO_Print
	1067	; Save the current stack (SS:SP).
	1068	mov ax,ss
	1069	mov [CurrentSS],ax
	1070	mov [CurrentSP],sp
[30]	1071
[117]	1072	; Restore the old stack.
	1073	mov ss,[OldSS]
	1074	mov sp,[OldSP]
[30]	1075
[117]	1076	; Pop the registers with the BIOS values.
	1077	popa
	1078	; Push them back for AiR-BOOT restart (debug mode).
	1079	pusha
	1080	; Dump them to the serial-port.
	1081	call DEBUG_DumpRegisters
	1082	; Restore the current stack.
	1083	mov ax,[CurrentSS]
	1084	mov ss,ax
	1085	mov sp,[CurrentSP]
[30]	1086
[117]	1087	popa
	1088	popf
	1089	ENDIF
	1090	ENDIF
[30]	1091
[51]	1092
[117]	1093	;!
	1094	;! DEBUG_BLOCK
	1095	;! Dump the registers at this point.
	1096	;!
	1097	IFDEF AUX_DEBUG
	1098	IF 0
	1099	pushf
	1100	pusha
	1101	;~ call DEBUG_DumpRegisters
	1102	;~ call DEBUG_DumpDriveLetters
	1103	;~ call DEBUG_DumpVolumeLetters
	1104	;~ call DEBUG_DumpPartitionXref
	1105	popa
	1106	popf
	1107	ENDIF
	1108	ENDIF
	1109
[51]	1110	; -----------------------------------------------------------------------------
	1111	; PARTITION SCAN
	1112	; -----------------------------------------------------------------------------
[77]	1113
	1114
	1115
	1116
	1117
	1118
[51]	1119	;
[52]	1120	; BOOKMARK: Scan all partitions
[51]	1121	;
	1122	call PARTSCAN_ScanForPartitions
	1123	; Internal Partition Table is now populated.
	1124
[117]	1125	;!
	1126	;! DEBUG_BLOCK
	1127	;! Dump various tables.
	1128	;! Uncomment below to activate.
	1129	;!
	1130	IFDEF AUX_DEBUG
	1131	IF 0
	1132	pushf
	1133	pusha
	1134	;~ call DEBUG_DumpIPT
	1135	;~ call DEBUG_DumpPartitionPointers
	1136	;~ call DEBUG_DumpNewPartTable
	1137	;~ call DEBUG_DumpDriveLetters
	1138	;~ call DEBUG_DumpDriveLetters
	1139	;~ call DEBUG_DumpVolumeLetters
	1140	;~ call DEBUG_DumpPartitionXref
	1141	popa
	1142	popf
	1143	ENDIF
	1144	ENDIF
[49]	1145
[30]	1146
[51]	1147	; -----------------------------------------------------------------------------
	1148	; RESTORE FORCED DRIVELETTER CORRELATION [LVM]
	1149	; -----------------------------------------------------------------------------
	1150
	1151	;
	1152	; Reconnect forced drive-letters to their corresponding
	1153	; partitions.
	1154	;
[52]	1155	; BOOKMARK: Update Driveletters so they are in-sync again
[51]	1156	call PARTSCAN_UpdateDriveLetters
	1157	; Driveletter <-> Partition correlation is now restored.
	1158
	1159
	1160
[117]	1161	;!
	1162	;! DEBUG_BLOCK
	1163	;! Dump various tables.
	1164	;!
	1165	IFDEF AUX_DEBUG
	1166	IF 0
	1167	pushf
	1168	pusha
	1169	;~ call DEBUG_DumpIPT
	1170	;~ call DEBUG_DumpPartitionPointers
	1171	;~ call DEBUG_DumpNewPartTable
	1172	;~ call DEBUG_DumpDriveLetters
	1173	;~ call DEBUG_DumpDriveLetters
	1174	;~ call DEBUG_DumpVolumeLetters
	1175	;~ call DEBUG_DumpPartitionXref
	1176	popa
	1177	popf
	1178	ENDIF
	1179	ENDIF
[51]	1180
	1181
	1182	; -----------------------------------------------------------------------------
	1183	; SHOW WE ARE ALIVE
	1184	; -----------------------------------------------------------------------------
	1185
	1186	;
	1187	; Put some info about AiR-BOOT and the system on the screen.
	1188	;
	1189
[49]	1190	; Display number of physical disks found
[37]	1191	mov si, offset DisksFound
	1192	call MBR_Teletype
	1193	mov al, [TotalHarddiscs]
	1194	call VideoIO_SyncPos
	1195	call VideoIO_PrintByteDynamicNumber
	1196	xor si,si
	1197	call MBR_TeletypeNL
[30]	1198
[49]	1199	; Display number of partitions found
[37]	1200	mov si, offset PartitionsFound
	1201	call MBR_Teletype
	1202	mov al, [CFG_Partitions]
	1203	call VideoIO_SyncPos
	1204	call VideoIO_PrintByteDynamicNumber
[30]	1205
[49]	1206	; Dump summier disk-info for disks found
[37]	1207	xor si,si
	1208	call MBR_TeletypeNL
	1209	call MBR_TeletypeNL
	1210	call VideoIO_SyncPos
	1211	mov dl,80h
	1212	call VideoIO_DumpDiskInfo
[30]	1213
	1214
	1215
	1216
	1217
[51]	1218	; -----------------------------------------------------------------------------
	1219	; eComStation PHASE1 CHECK
	1220	; -----------------------------------------------------------------------------
	1221
	1222	;
[67]	1223	; BOOKMARK: Check for OS/2 being installed
	1224	; Here we check if OS/2 is being installed.
[51]	1225	; If so, we forgo the menu and directly boot it.
	1226	;
	1227
	1228	; If the first byte of the name of the Install Volume is not 0
[49]	1229	; then we potentially have a phase1 boot.
[67]	1230	test byte ptr [OS2_InstallVolume],0ffh
[49]	1231	; Nope, so continue normally.
	1232	jz MBR_Main_ContinueBoot
[36]	1233
[49]	1234	; Setup phase1.
	1235	; It is still possible that a name was set for the
	1236	; Install Volume that does not exist.
	1237	; In that case CY will be clear and AL=0FFh.
	1238	call PART_SetupPhase1
	1239	; Oops, Install Volume not found, continue normally.
	1240	jnc MBR_Main_ContinueBoot
[30]	1241
	1242
[51]	1243	;
[49]	1244	; == Install Volume Found ==
[51]	1245	;
[30]	1246
[51]	1247
[117]	1248	;!
	1249	;! DEBUG_BLOCK
	1250	;! Dump various tables.
	1251	;!
	1252	IFDEF AUX_DEBUG
	1253	IF 0
	1254	pushf
	1255	pusha
	1256	;~ call DEBUG_DumpIPT
	1257	;~ call DEBUG_DumpPartitionPointers
	1258	;~ call DEBUG_DumpPartitionXref
	1259	;~ call DEBUG_DumpNewPartTable
	1260	;~ call DEBUG_DumpDriveLetters
	1261	popa
	1262	popf
	1263	ENDIF
	1264	ENDIF
[51]	1265
	1266
[67]	1267	; BOOKMARK: Scan for Partitions (Only if OS/2 install going on)
[51]	1268	; Because one or more partitions are possibly added, the
	1269	; PartitionXref table is not 'in sync' and could cause the
	1270	; wrong system to be automatically booted.
	1271	; So we rescan all partitions causing the PartitionXref
	1272	; table to be filled with correct values so the auto-boot
	1273	; from the new partition will work correctly.
[49]	1274	call PARTSCAN_ScanForPartitions
[30]	1275
	1276
[117]	1277	;!
	1278	;! DEBUG_BLOCK
	1279	;! Dump various tables.
	1280	;!
	1281	IFDEF AUX_DEBUG
	1282	IF 0
	1283	pushf
	1284	pusha
	1285	;~ call DEBUG_DumpIPT
	1286	;~ call DEBUG_DumpPartitionPointers
	1287	;~ call DEBUG_DumpPartitionXref
	1288	;~ call DEBUG_DumpNewPartTable
	1289	;~ call DEBUG_DumpDriveLetters
	1290	popa
	1291	popf
	1292	ENDIF
	1293	ENDIF
[30]	1294
[51]	1295	; Setup automatic boot to forgo the Menu.
	1296	; PART_SetupPhase1 has filled in the other variables.
	1297	mov byte ptr [CFG_AutomaticBoot],1
[30]	1298
[51]	1299	;
	1300	; At this point the AiR-BOOT configuration has been altered
	1301	; to automatically boot the newly installed system without
	1302	; displaying the menu.
	1303	; Code further down the road will take care of that.
	1304	;
[49]	1305	jmp MBR_Main_ContinueBoot
[30]	1306
	1307
[49]	1308
	1309
[51]	1310	;
	1311	; Wether a new system is being installed or not,
	1312	; booting continues here.
	1313	;
	1314	MBR_Main_ContinueBoot:
[49]	1315
[51]	1316	;
	1317	; Inform user how to switch between post-screen and menu
	1318	; by putting this info on the screen.
	1319	;
[37]	1320	xor si,si
	1321	call MBR_TeletypeNL
	1322	xor si,si
	1323	call MBR_TeletypeNL
	1324	call MBR_TeletypeSyncPos
	1325	xor si,si
	1326	call MBR_TeletypeNL
	1327	call MBR_TeletypeNL
	1328	mov si, offset ShowMenu
	1329	call MBR_TeletypeBold
[30]	1330
	1331
[51]	1332	;
	1333	; Debug stop.
	1334	;
[30]	1335
[37]	1336	;
	1337	; ####################### WAIT FOR KEY ########################
	1338	;
[30]	1339
[37]	1340	; Wait for key so we can see debug log if ab-menu hangs.
[49]	1341	;~ xor ax, ax
	1342	;~ int 16h
[37]	1343	;call SOUND_Beep
[30]	1344
	1345
[51]	1346	; Copy BIOS POST to Second Page
[37]	1347	mov ax, VideoIO_Page1
[51]	1348	call VideoIO_BackUpTo
[30]	1349
[37]	1350	;call SOUND_Beep
[30]	1351
	1352
[52]	1353	; BOOKMARK: Save Configuration
[37]	1354	; Save configuration so phase1 boot-through is disabled
	1355	; on next boot.
[67]	1356	mov byte ptr [OS2_InstallVolume], 0
[37]	1357	call DriveIO_SaveConfiguration
[31]	1358
	1359
	1360
[37]	1361	;
[51]	1362	; See if setup needs to be entered.
[37]	1363	;
	1364	MBR_Main_ReEnterSetup:
	1365	call SETUP_CheckEnterSETUP
[7]	1366
[51]	1367	;
	1368	; Do some post processing.
	1369	;
[52]	1370	; BOOKMARK: After Crap
[37]	1371	call AFTERCRAP_Main
[30]	1372
[37]	1373	MBR_Main_ReEnterBootMenuPre:
	1374	; SetUp PartitionPointers for BootMenu (filter non-bootable)
	1375	call PART_CalculateMenuPartPointers
[7]	1376
[37]	1377	; ...and count that one...
[46]	1378	cmp byte ptr [PartitionPointerCount], 0
[37]	1379	jne MBR_Main_SomethingBootAble
	1380	mov si, offset TXT_NoBootAble
	1381	call MBR_Teletype
	1382	jmp MBR_HaltSystem
[30]	1383
[37]	1384	MBR_Main_SomethingBootAble:
	1385	; FixUp Values, define Timed Setup booting, etc.
	1386	call PART_FixUpDefaultPartitionValues
[7]	1387
[30]	1388
	1389
[37]	1390	; -------------------------------------------------- BOOT-MENU
	1391	MBR_Main_ReEnterBootMenu:
	1392	call BOOTMENU_ResetMenuVars ; reset has to be done
[46]	1393	test byte ptr [CFG_AutomaticBoot], 1
[37]	1394	jz MBR_Main_NoAutomaticBooting
[49]	1395
	1396
[37]	1397	; ------------------------------------------ AUTOMATIC BOOTING
	1398	; Select automatic partition, disable automatic booting for
	1399	; next time and boot system...
[46]	1400	mov byte ptr [CFG_AutomaticBoot], 0
[37]	1401	call PASSWORD_AskSystemPwd
	1402	mov al, Menu_EntryAutomatic
[30]	1403
[37]	1404	;mov al, 2
[30]	1405
[37]	1406	mov Menu_EntrySelected, al ; zero based
	1407	jmp MBR_Main_NoBootMenu
[7]	1408
[30]	1409
[49]	1410	MBR_Main_NoAutomaticBooting:
	1411
[37]	1412	;call SOUND_Beep
[30]	1413
[46]	1414	test byte ptr [CFG_BootMenuActive], 0FFh
[37]	1415	jnz MBR_Main_GotBootMenu
	1416	; ----------------------------------------------- NO BOOT-MENU
	1417	; Select default partition and boot system...
	1418	call PASSWORD_AskSystemPwd
[30]	1419
[37]	1420	;call VideoIO_DBG_WriteString2
[30]	1421
[37]	1422	mov al, Menu_EntryDefault
	1423	;mov al,0 ; zero based
	1424	mov Menu_EntrySelected, al
	1425	jmp MBR_Main_NoBootMenu
[7]	1426
[37]	1427	MBR_Main_GotBootMenu:
	1428	; ------------------------------------------ BOOT-MENU VISUALS
[51]	1429
	1430
	1431	IFDEF FX_ENABLED
[37]	1432	call FX_StartScreen
[51]	1433	ENDIF
[30]	1434
[52]	1435	; BOOKMARK: Build Main Menu
[37]	1436	call BOOTMENU_BuildBackground
	1437	call BOOTMENU_BuildMain
[51]	1438
	1439	IFDEF FX_ENABLED
[37]	1440	call FX_EndScreenRight
[51]	1441	ENDIF
	1442
[37]	1443	call PASSWORD_AskSystemPwd
	1444	call BOOTMENU_ResetTimedBoot
[30]	1445
[52]	1446	; BOOKMARK: Display Main Menu
[37]	1447	call BOOTMENU_Execute
[30]	1448
[37]	1449	jc MBR_Main_ReEnterSetup
	1450	call BOOTMENU_SetVarsAfterMenu
[30]	1451
[37]	1452	; ---------------------------------------------------- BOOTING
	1453	MBR_Main_NoBootMenu:
[51]	1454
	1455	IFDEF FX_ENABLED
[37]	1456	call FX_StartScreen
[51]	1457	ENDIF
	1458
[52]	1459	; BOOKMARK: Display bye-screen and start selected partition
[37]	1460	call BOOTMENU_BuildGoodBye
[51]	1461
	1462	IFDEF FX_ENABLED
[37]	1463	call FX_EndScreenRight
[51]	1464	ENDIF
	1465
[37]	1466	call PASSWORD_AskChangeBootPwd
[7]	1467
[37]	1468	call ANTIVIR_SaveBackUpMBR
[7]	1469
[49]	1470	; Preload the selected menu-entry
[67]	1471	; However, this value will be wrong if OS/2 phase1 is
[49]	1472	; active and the installation partition is newly created.
	1473	; See below for the adjustment.
	1474	mov dl, byte ptr [Menu_EntrySelected]
	1475
[51]	1476
	1477	;
	1478	; Prepare to start the partition.
	1479	;
[49]	1480	jmp MBR_Main_StartPartition
	1481
	1482
	1483
[51]	1484	; -----------------------------------------------------------------------------
	1485	; START PARTITION
	1486	; -----------------------------------------------------------------------------
	1487
[49]	1488	MBR_Main_StartPartition:
	1489
[117]	1490	IFDEF AUX_DEBUG
	1491	IF 0
	1492	pushf
	1493	pusha
	1494	;~ call DEBUG_DumpIPT
	1495	;~ call DEBUG_DumpPartitionPointers
	1496	;~ call DEBUG_DumpPartitionXref
	1497	;~ call DEBUG_DumpNewPartTable
	1498	popa
	1499	popf
	1500	ENDIF
	1501	ENDIF
[49]	1502
	1503
[37]	1504	; -------------------------------------------- START PARTITION
[51]	1505	; THIS DOES NOT RETURN !
[37]	1506	call PART_StartPartition
[30]	1507
	1508
[31]	1509
[51]	1510
[30]	1511	;
[51]	1512	; This entry-point restarts AiR-BOOT almost from scratch.
	1513	; It skips the movement of the MBR but otherwise it is a functional restart.
	1514	; The old BIOS SS:SP where the registers on entry are stored is passed along.
[52]	1515	; This entry-point is used for debugging purposes.
[51]	1516	;
[52]	1517	; BOOKMARK: AiR-BOOT Restart (used for debugging)
[51]	1518	AirbootRestart:
[79]	1519	mov bx, [OldSP] ; Old SP when BIOS transferred control to AB
	1520	mov cx, [OldSS] ; Old SS when BIOS transferred control to AB
	1521	xor dh, dh ; Head 0
	1522	mov dl, [BIOS_BootDisk] ; Disk AirBoot was loaded from
[51]	1523	jmp MBR_RealStart
	1524
	1525
	1526	;
	1527	; This entry-point displays a popup that the system is halted
	1528	; and then halts the system.
	1529	; It is entered on severe error conditions.
	1530	;
[52]	1531	; BOOKMARK: Halt System
[51]	1532	HaltSystem:
	1533	call VideoIO_ClearScreen
	1534	mov ax,0ababh
	1535	mov cx, 0C04h
	1536	mov si, offset SystemHalted
	1537	call SETUP_ShowErrorBox
	1538	; Halt the system.
	1539	jmp MBR_HaltSystem
	1540
	1541
	1542
	1543
	1544
	1545
	1546	;
[52]	1547	; The following section includes various assembler modules
	1548	; at the source level. These contain functionality for a
	1549	; multitude of categories like disk-access, video-io, lvm,
	1550	; debugging, etc. Later versions of AiR-BOOT will use such
	1551	; modules at the object-file level so they can be shared
	1552	; more easily.
[51]	1553	;
	1554
	1555
	1556	; -----------------------------------------------------------------------------
	1557	; INCLUDED FILE SECTION
	1558	; -----------------------------------------------------------------------------
	1559
[52]	1560	; BOOKMARK: Include Section
	1561
[51]	1562	;
[30]	1563	; Include other code-modules here.
	1564	;
[51]	1565
[30]	1566	b_std_txt:
[60]	1567	include regular/std_text.asm ; Standard (non-translateable text)
[30]	1568	size_std_txt = $-b_std_txt
	1569
	1570	b_driveio:
[60]	1571	include regular/driveio.asm ; Drive I/O, Config Load/Save
[30]	1572	size_driveio = $-b_driveio
	1573
[43]	1574	b_lvm:
[60]	1575	include special/lvm.asm ; LVM-specific code
[43]	1576	size_lvm = $-b_lvm
	1577
[30]	1578	b_videoio:
[60]	1579	include regular/videoio.asm ; Video I/O
[30]	1580	size_videoio = $-b_videoio
	1581
	1582	b_timer:
[60]	1583	include regular/timer.asm ; Timer
[30]	1584	size_timer = $-b_timer
	1585
	1586	b_partmain:
[60]	1587	include regular/partmain.asm ; Regular Partition Routines
[30]	1588	size_partmain = $-b_partmain
	1589
	1590	b_partscan:
[60]	1591	include regular/partscan.asm ; Partition Scanning
[30]	1592	size_partscan = $-b_partscan
	1593
	1594	b_bootmenu:
[60]	1595	include regular/bootmenu.asm ; Boot-Menu
[30]	1596	size_bootmenu = $-b_bootmenu
	1597
	1598	b_password:
[60]	1599	include regular/password.asm ; Password related
[30]	1600	size_password = $-b_password
	1601
	1602	b_other:
[60]	1603	include regular/other.asm ; Other Routines
[30]	1604	size_other = $-b_other
[7]	1605
[30]	1606	b_main:
[60]	1607	include setup/main.asm ; The whole AiR-BOOT SETUP
[30]	1608	size_main = $-b_main
	1609
	1610	b_math:
[60]	1611	include regular/math.asm ; Math functions (like 32-bit multiply)
[30]	1612	size_math = $-b_math
	1613
	1614	b_txtother:
[60]	1615	include text/txtother.asm ; All translateable Text-Strings
[30]	1616	size_txtother = $-b_txtother
	1617
	1618	b_txtmenus:
[60]	1619	include text/txtmenus.asm ; All translateable Menu-text
[30]	1620	size_txtmenus = $-b_txtmenus
	1621
	1622	b_charset:
[60]	1623	include text/charset.asm ; Special Video Charsets (if needed)
[30]	1624	size_charset = $-b_charset
	1625
[36]	1626	b_conv:
[60]	1627	include regular/conv.asm ; Various conversion routines
[36]	1628	size_conv = $-b_conv
[30]	1629
	1630	b_virus:
[60]	1631	include special/virus.asm ; Virus Detection / Anti-Virus
[30]	1632	size_virus = $-b_virus
[51]	1633
[30]	1634	b_billsuxx:
[60]	1635	include special/f00k/billsuxx.asm ; Extended Partition - Microsoft-Hack
[30]	1636	size_billsuxx = $-b_billsuxx
	1637
	1638	b_sound:
[60]	1639	include special/sound.asm ; Sound
[30]	1640	size_sound = $-b_sound
	1641
	1642	b_apm:
[60]	1643	include special/apm.asm ; Power Managment Support
[30]	1644	size_apm = $-b_apm
	1645
[51]	1646
	1647
	1648	;
	1649	; Cyrillic support.
	1650	;
	1651	IFDEF TXT_IncludeCyrillic
	1652	b_ccharset:
[60]	1653	include special/charset.asm ; Charset Support (e.g. Cyrillic)
[51]	1654	size_ccharset = $-b_ccharset
	1655	ENDIF
	1656
	1657	; Various debugging routines, uses AUXIO and CONV
	1658	IFDEF AUX_DEBUG
	1659	b_debug:
[60]	1660	include regular/debug.asm ; Debug module
[51]	1661	size_debug = $-b_debug
	1662	b_auxio:
[60]	1663	include regular/auxio.asm ; Com-port support for debugging
[51]	1664	size_auxio = $-b_auxio
	1665	ENDIF
	1666
	1667	;
	1668	; We only include this if FX_ENABLED is defined.
	1669	; FX is disabled when debugging to have more room for debug-code.
	1670	; The module compiles to 50eh = 1294 bytes, so that is a lot.
	1671	;
	1672	IFDEF FX_ENABLED
[30]	1673	b_fx:
[60]	1674	include special/fx.asm ; l33t Cooper-Bars/Scrolling <bg>
[30]	1675	size_fx = $-b_fx
[51]	1676	ENDIF
[30]	1677
	1678
[51]	1679	;
	1680	; End of code marker.
	1681	;
[52]	1682	; BOOKMARK: END OF CODE
[51]	1683	db 'BABE'
	1684	db 'FACE'
[30]	1685
[47]	1686
[51]	1687	; -----------------------------------------------------------------------------
	1688	; END OF CODE
	1689	; -----------------------------------------------------------------------------
	1690	code_end:
	1691
	1692
	1693
	1694
	1695
	1696
	1697
	1698
	1699
	1700
	1701	; -----------------------------------------------------------------------------
	1702	; BLDLEVEL INFORMATION
	1703	; -----------------------------------------------------------------------------
	1704
[52]	1705	; BOOKMARK: BLDLEVEL Information
[51]	1706	ORIGIN 068A0h
	1707
	1708	;
	1709	; The space between this offset and code_end is the space
	1710	; available for code.
	1711	;
	1712	zzz_code_space = $ - code_end
	1713
	1714
[46]	1715	bld_level:
[43]	1716	;
[46]	1717	; Here we insert the OS/2 BLDLEVEL Information.
	1718	; It is composed of the AiR-BOOT version-info and other
[51]	1719	; information. It is unique for each release of AiR-BOOT.
[46]	1720	;
[51]	1721
	1722	;
[47]	1723	; ?? When AUX_DEBUG is enabled and the above org is active,
	1724	; the BLDLEVEL gets corrupted eventhough it gets inserted here
	1725	; explicitly. The effect is almost like an 'OR' or a merge
	1726	; with the already generated FX code.
	1727	; Tasm and JWasm produce different results.
	1728	; ??
	1729	;
[46]	1730	InsertBuildLevel
	1731
[47]	1732
[30]	1733
[7]	1734
	1735
[51]	1736	;==============================================================================
	1737	; Sector 53
	1738	;==============================================================================
	1739
[45]	1740	;
[51]	1741	; From here on, the layout of the image consists of:
	1742	; - AiR-BOOT Protection Image
	1743	; - AiR-BOOT Configuration
	1744	; - DriveLetters
	1745	; - Install Volume
	1746	; - Floppy/CDROM/BIOS BOOT ENTRIES
	1747	; - Internal Partition Table (IPT)
	1748	; - Hidden Partition Table (HPT)
	1749	; - MBR Backup
[45]	1750	;
[7]	1751
[37]	1752	;
[51]	1753	; After that, the BSS follows with several runtime
	1754	; variables and structures.
	1755	; The BSS is not part of the image on disk of course.
	1756	;
	1757
	1758	; -----------------------------------------------------------------------------
	1759	; PROTECTION IMAGE
	1760	; -----------------------------------------------------------------------------
	1761
	1762	;
[52]	1763	; This is the AiR-BOOT MBR Protection Image.
[46]	1764	; The stuff generated here gets overwritten when the
[51]	1765	; MBR_PROT module, which is assembled separately,
	1766	; gets binary merged.
[37]	1767	; So you won't find the string below in the generated binary.
	1768	;
[52]	1769	; BOOKMARK: AiR-BOOT MBR Protection Image
[51]	1770	ORIGIN 06900h
[46]	1771
	1772
[51]	1773
	1774
[46]	1775	;
[51]	1776	; Hardcoded to 768 bytes (MBR_PROT.ASM)
[46]	1777	; The string below is searched for by the FIXCODE helper and must be
[51]	1778	; page (256 bytes) aligned.
[46]	1779	;
[51]	1780	; It seems to be possible to shrink the protection-image to 768 bytes.
	1781	; That gives us an additional 256 bytes of code-space.
	1782	; MBR-PROT.ASM,FIXCODE.C,PARTMAIN.ASM and AIR-BOOT.ASM need to be adjusted for that.
	1783	; Also the granularity needs to change from 512 bytes to 256 bytes since
	1784	; 6900h is not a 512-byte boundary.
	1785	;
	1786	; 20120908 - Done.
	1787	;
[37]	1788	MBR_Protection db 'AiR-BOOT MBR-Protection Image'
	1789
[43]	1790	; Just fill.
[51]	1791	;~ db 1024-($-MBR_Protection) dup('M')
	1792	db 768-($-MBR_Protection) dup('M')
[37]	1793
	1794
[51]	1795
	1796
	1797
	1798
	1799
[31]	1800	;==============================================================================
[51]	1801	; Sector 55
	1802	;==============================================================================
	1803	; -----------------------------------------------------------------------------
	1804	; AiR-BOOT CONFIGURATION
	1805	; -----------------------------------------------------------------------------
[30]	1806
[37]	1807	;
	1808	; This section contains the AiR-BOOT configuration.
	1809	; Note that it has a version that should be updated
	1810	; when stuff is added.
	1811	; Also add stuff to the end so that offsets of other
	1812	; variables remain vaild.
	1813	;
[52]	1814	; BOOKMARK: AiR-BOOT Configuration Sector
[45]	1815	ORIGIN 06C00h
[30]	1816
[37]	1817	Configuration:
[69]	1818	; This is the signature for the AiR-BOOT Configuration.
	1819	; Note that this configuration section, like the code section,
	1820	; is CRC protected. This means that poking values in these
	1821	; sections on the disk will invalidate AiR-BOOT and cause it
	1822	; to halt. This is a protection method against other software
	1823	; modifying stuff in track 0.
	1824	db 'AiRCFG-TABLE',0adh
[55]	1825	db 01h, 10h, 'U' ; "Compressed" ID String
[37]	1826	; Version 1.02 was for code 1.06, 1.03 was internal
	1827	; and 1.04,1.05 and 1.06 do not exist.
[46]	1828	;
	1829	; 1.07 was used with AB v1.07 and introduced the phase1
	1830	; system-name. For the rest it is compatible with v1.02.
	1831	;
	1832	; 1.0.8 is introduced with AB v1.0.8 and indicates the movement
	1833	; of several components and the packing of the hideparttable.
	1834	; The core configuration has not changed but the generated
	1835	; configuration has. The v1.0.8 installer handles upgrading.
	1836	;
[54]	1837	; It has been decided that uneven minor numbers will be
	1838	; test-versions. Therefore v1.0.8 has been bumbed to v1.1.0.
[60]	1839	;
[37]	1840	; It is not required for the config to have the
	1841	; same version as the code, so in the future
	1842	; the code version might be higher than the
	1843	; config version if there are no changes to the latter.
[46]	1844	;
[7]	1845
[37]	1846	CFG_LastTimeEditLow dw 0 ; Last Time Edited Stamp (will incr every setup)
	1847	CFG_LastTimeEditHi dw 0 ; second 16 bit part...
[7]	1848
[37]	1849	CFG_CheckConfig dw 0 ; Check-Sum for Configuration
[7]	1850
[37]	1851	CFG_Partitions db 0 ; Count of partitions in IPT
[51]	1852	CFG_MiscFlags db 1 ; Miscellaneous Flags (See EQUates)
[37]	1853	CFG_PartDefault db 0 ; Default-Partition (Base=0)
[7]	1854
[37]	1855	CFG_PartLast db 0 ; Which Partition was booted last time ? (Base=0)
	1856	CFG_TimedBoot db 0 ; Timed Boot Enable (for REAL Enable look TimedBootEnable)
	1857	CFG_TimedSecs db 15 ; Timed Boot - How Many Seconds Till Boot
	1858	CFG_TimedDelay dw 123 ; Timed Boot - Delay
	1859	CFG_TimedBootLast db 1 ; Timed Boot - Boot From Last Drive Booted From
	1860	CFG_RememberBoot db 1 ; Remember Manual Boot Choice
	1861	CFG_RememberTimed db 0 ; Remember if Timed Boot (if both disabled: Boot Default)
	1862	CFG_IncludeFloppy db 1 ; Include Floppy Drives in Boot-Menu
	1863	CFG_BootMenuActive db 1 ; Display Boot-Menu (if Disabled: Boot Default)
[7]	1864	; v0.29+ -> 2 - Detailed Bootmenu
[37]	1865	CFG_PartitionsDetect db 1 ; Autodetect New Partitions (Auto-Add!)
	1866	CFG_PasswordSetup db 0 ; Ask Password when entering Setup
	1867	CFG_PasswordSystem db 0 ; Ask Password when booting System
	1868	CFG_PasswordChangeBoot db 0 ; Ask Password when changing boot partition
	1869	CFG_ProtectMBR db 0 ; Protect MBR via TSR ?
	1870	CFG_IgnoreWriteToMBR db 0 ; Just ignore writes to MBR, otherwise crash
	1871	CFG_FloppyBootGetName db 0 ; Gets floppy name for display purposes
	1872	CFG_DetectVirus db 0 ; Detect Virus ?
	1873	CFG_DetectStealth db 0 ; Detect Stealth-Virus ?
	1874	CFG_DetectVIBR db 0 ; Detect BootRecord-Virus ?
	1875	CFG_AutoEnterSetup db 0 ; Automatic Enter Setup (first install!)
	1876	CFG_MasterPassword dw 0101Fh ; Encoded Password (this is just CR)
	1877	dw 07A53h
	1878	dw 0E797h
	1879	dw 0A896h
	1880	CFG_BootPassword dw 0101Fh ; Another CR... ;-)
	1881	dw 07A53h
	1882	dw 0E797h
	1883	dw 0A896h
	1884	db 0 ; Rude-Protection - Removed since v0.28b
	1885	CFG_LinuxRootPartition db 0 ; Linux Root Partition (Base=0)
	1886	CFG_TimedKeyHandling db 0 ; Timed Key Handling (for Timed Boot)
	1887	; 0 - Do Nothing
	1888	; 1 - Reset Time
	1889	; 2 - Stop Time
	1890	CFG_MakeSound db 0 ; Should be clear ;)
	1891	CFG_FloppyBootGetTimer db 0 ; Floppy Name will get updated every 2 secs
[51]	1892	CFG_ResumeBIOSbootSeq db 1 ; If BIOS Boot Sequence should be resumed
[37]	1893	; 0 - Disabled
	1894	; 1 - CD-ROM
	1895	; 2 - Network
	1896	; 3 - ZIP/LS120
	1897	CFG_CooperBars db 0 ; If Cooper Bars should be shown
	1898	CFG_LinuxCommandLine db 75 dup (0) ; Linux Command Line
	1899	CFG_LinuxKrnlPartition db 0FFh ; FAT-16 Linux Kernel Partition (Base=0)
	1900	; FFh -> Disabled
	1901	CFG_LinuxDefaultKernel db 'DEFAULT', 4 dup (32), 0 ; Default Kernel Name
	1902	CFG_LinuxLastKernel db 11 dup (32), 0 ; Last-Booted Kernel Name
	1903	CFG_ExtPartitionMShack db 0 ; Extended Partition M$-Hack Global Enable
	1904	CFG_AutomaticBoot db 0 ; Automatic Booting (only one bootup)
	1905	CFG_PartAutomatic db 0 ; Partition-No for automatic booting
	1906	CFG_ForceLBAUsage db 1 ; LBA-BIOS-API forced on any HDD I/O
	1907	CFG_IgnoreLVM db 0 ; Ignores any LVM-Information
[7]	1908
[30]	1909
	1910	;
	1911	; THERE IS ROOM RESERVED HERE FOR MORE VARIABLES
	1912	;
	1913
[45]	1914	;
	1915	; Drive Letters.
	1916	;
[52]	1917	; BOOKMARK: Stored Drive Letters
[45]	1918	ORIGIN 06CB0h
[30]	1919
	1920
[51]	1921	; -----------------------------------------------------------------------------
	1922	; DRIVE LETTERS
	1923	; -----------------------------------------------------------------------------
	1924
[45]	1925	;
	1926	; Moved here to make room for packed hiddenparttable.
[71]	1927	; This gets filled with drive-letters that are assigned using the dl-feature.
[45]	1928	;
	1929	DriveLetters db LocIPT_MaxPartitions dup (0)
	1930	; Format is:
	1931	;============
	1932	; Drive-Letter : BYTE (80h-C:, 81h-D:)
	1933	; --------------------> 1 Byte * 45
[30]	1934
[51]	1935
	1936
	1937	; -----------------------------------------------------------------------------
	1938	; INSTALL VOLUME
	1939	; -----------------------------------------------------------------------------
	1940
[45]	1941	;
[37]	1942	; Allways have the name of the installation volume
	1943	; at this offset.
	1944	; So future config changes will not break auto-install.
[45]	1945	;
[67]	1946	; BOOKMARK: Name of OS/2 Installation Volume
[45]	1947	ORIGIN 06D00h
[37]	1948
[67]	1949	; SET(A)BOOT stores the volume name of the OS/2 system being installed here.
[31]	1950	; It is truncated to 11 chars because AiR-BOOT currently does not support
	1951	; longer labelnames. The name is also capitalized.
[67]	1952	OS2_InstallVolume db 0,'NOPHASEONE' ,0
[30]	1953
[37]	1954	;
	1955	; THERE IS ROOM RESERVED HERE FOR MORE VARIABLES
	1956	;
	1957
[51]	1958
	1959	; -----------------------------------------------------------------------------
	1960	; FLOPPY/CDROM/BIOS BOOT ENTRIES
	1961	; -----------------------------------------------------------------------------
	1962
[37]	1963	;
	1964	; 06DABh - 06C00h = 01ABh = 427 bytes.
	1965	; Entries allocated down from 06E00 boundary.
	1966	;
[52]	1967	; BOOKMARK: Floppy/CD-ROM/BIOS Boot Entries
[46]	1968	ORIGIN 06DABh ; 427 Boundry
[37]	1969
	1970	; (432 - 5 = 427)
	1971	AutoDrvLetter db 0
	1972	AutoDrvLetterSerial dd 0
	1973
	1974	; This entry is also 34 bytes long (466 - 34 = 432)
	1975	BIOScontIPTentry:
	1976	db 0, 0, 0, 0, ' '
	1977	db 0, 0FEh, Flags_Bootable
	1978	dw 0 ; No Checksum :)
	1979	db 0, 1, 0
	1980	db 0, 1, 0 ; Location of Partition/Boot Record
	1981	dd 0, 0
	1982
[7]	1983	; VIR variables are for the AiR-BOOT Anti Virus Code
	1984	; Most of them are backups of Interrupt Points, so we can check, if a
	1985	; stealth virus is on-line, we can intercept its call.
	1986	; Normal (non stealth) virus are trapped simply by rereading the MBR sector.
[46]	1987	; If a virus is found, we will restore MBR from Sektor 60/62 and stop the
	1988	; system from working, so the user has to press reset.
	1989	; That's saver than a Reboot.
[7]	1990	;
	1991	; If a virus is found on the partition to boot, the system will ONLY halt,
	1992	; nothing more, because we can not remove it. The user shall do it :)
	1993	; Those viruses are detected via a real nasty method...Checksum-Checking of the
	1994	; boot-record, which is to be executed. If it does not match the one in our
	1995	; internal partition table, we will stop. You may however switch this detection
	1996	; off or just reset it by switching 'VIBR Detection'.
	1997
[37]	1998	; 478 - 12 = 466 ; 466 Sub-Part
	1999	CFG_VIR_INT08 dd 0 ; pointer to saved 08h entry point
	2000	CFG_VIR_INT13 dd 0 ; pointer to saved 13h entry point
	2001	CFG_VIR_INT1C dd 0 ; pointer to saved 1Ch entry point
[30]	2002
[37]	2003	; 478 Boundry (512-34)
	2004	; This entry is also 34 bytes long
	2005	FloppyIPTentry db 0, 0, 0, 0, 'FloppyDrive'
	2006	db 0, 0FFh, Flags_Bootable
	2007	dw 0 ; No Checksum :)
	2008	db 0, 1, 0
	2009	db 0, 1, 0 ; Location of Partition/Boot Record
	2010	dd 0, 0
[30]	2011
	2012
[51]	2013
	2014	; -----------------------------------------------------------------------------
	2015	; INTERNAL PARTITION TABLE (IPT)
	2016	; -----------------------------------------------------------------------------
	2017
[45]	2018	;
	2019	; AiR-BOOT Internal Partition Table (IPT)
	2020	;
[52]	2021	; BOOKMARK: Internal Partition Table
[45]	2022	ORIGIN % (image_size - 0a00h - (image_size - image_size_60secs))
[30]	2023
	2024
[45]	2025	;
	2026	; Rousseau: This is the start of the AiR-BOOT IPT
	2027	;
	2028	PartitionTable db (LocIPT_MaxPartitions * LocIPT_LenOfIPT) dup (0)
	2029	; no-partitions detected... :]
[7]	2030	; db 1, 0, 0, 0, 'Harddisc 1'
	2031	; db 0, 0FFh, Flags_BootAble
	2032	; dw 0 ; No Checksum :)
	2033	; db 0, 0, 1
[46]	2034	; db 0, 0, 1 ; Location of Partition/Boot Record
[7]	2035	; dd 0, 0
	2036
[37]	2037	; Format is:
	2038	;============
	2039	; SerialNumber * 4
	2040	; PartitionName * 11
	2041	; Drive * 1
	2042	; SystemID * 1 (means the partition type)
	2043	; Flags * 1
	2044	; Checksum * 2 (for virus checking)
	2045	; LocationBegin * 3 (where the partition begins)
	2046	; LocationPartTab * 3 (where the partition table is)
	2047	; AbsoluteBegin * 4 (where the partition begins, in absolute sectors)
	2048	; AbsolutePartTab * 4 (where the partition table is, in absolute sectors)
	2049	; --------------------> 34 Bytes (total maximum partition-entries = 30)
[7]	2050
[30]	2051
[37]	2052
	2053	; No need to check overlap here because this string will
	2054	; be overwritten if the maximum partition count is reached.
	2055	; So this is not a critical boundary.
[45]	2056	ORG (image_size - 600h - (image_size - image_size_60secs) / 2 - 10)
[37]	2057
	2058	db 'AiRBOOTPAR' ; 1K internal partition table
[30]	2059
	2060
	2061
[51]	2062	; -----------------------------------------------------------------------------
	2063	; HIDDEN PARTITION TABLE (HPT)
	2064	; -----------------------------------------------------------------------------
[30]	2065
[45]	2066	;
	2067	; Hidden Partition Table (6-bit packed as of v1.0.8)
	2068	;
[52]	2069	; BOOKMARK: Hidden Partition Table (packed)
[45]	2070	ORIGIN % (image_size - 600h - (image_size - image_size_60secs) / 2)
[30]	2071
[38]	2072	HidePartitionTable db (LocIPT_MaxPartitions * LocHPT_LenOfHPT) dup (0FFh)
[37]	2073	; Format is:
	2074	;============
	2075	; PartitionPtr : BYTE * 30
[38]	2076	; --------------------> 30 Bytes * 45
[30]	2077
[37]	2078	;
[45]	2079	; Driveletters were here.
	2080	; Moved down to make room for packed hideparttable.
	2081	;
[30]	2082
[37]	2083
[45]	2084	;
	2085	; End of hidden partition table.
	2086	; Check overlap here for security reasons.
	2087	;
	2088	ORIGIN % (image_size - 200h - 5)
[30]	2089
[45]	2090	; 79fa - end of packed hide table
	2091	db 'ABHID' ; 1K internal Hide-partition table
[30]	2092
	2093
	2094
	2095
[51]	2096	;==============================================================================
	2097	; Sector 62
	2098	;==============================================================================
	2099	; -----------------------------------------------------------------------------
	2100	; MBR BACKUP
	2101	; -----------------------------------------------------------------------------
[37]	2102
[45]	2103	;
	2104	; AiR-BOOT MBR Backup.
	2105	;
[52]	2106	; BOOKMARK: MBR Backup
[45]	2107	ORIGIN % (image_size - 200h)
[37]	2108
[31]	2109
[46]	2110	MBR_BackUpMBR db 'AiR-BOOT MBR-BackUp',\
	2111	' - Just to fill this sector with something',0
[37]	2112	AirBootRocks db 'AiR-BOOT Rocks!',0
[7]	2113
[45]	2114	db (512 - ($-MBR_BackUpMBR) - 2) dup('M')
[36]	2115
[45]	2116	; End of Image signature.
	2117	;
	2118	ORIGIN % (image_size - 2)
	2119	dw 0BABEh
[30]	2120
	2121
[45]	2122	;
	2123	; End of Image.
	2124	;
	2125	ORIGIN % (image_size)
[97]	2126	image_end:
[30]	2127
	2128	;
[51]	2129	; Terminate LDRIMAGE segment.
[30]	2130	;
[51]	2131	IFDEF SEGMENTED
[43]	2132	LDRIMAGE ENDS
[51]	2133	ENDIF
[30]	2134
[37]	2135
[51]	2136
	2137
	2138
	2139
	2140
	2141	;##############################################################################
	2142	; BSS SEGMENT
	2143	;##############################################################################
	2144
[52]	2145	; BOOKMARK: BSS Segment
[51]	2146
[30]	2147	;
[51]	2148	; Open BSS segment.
[30]	2149	;
[51]	2150	IFDEF SEGMENTED
[37]	2151	VOLATILE SEGMENT USE16 PUBLIC 'BSS'
	2152	ENDIF
	2153
[46]	2154
	2155
[30]	2156	sobss:
[112]	2157	sobss_abs = offset sobss + image_size
[31]	2158	;------------------------------------------------------------------------------
[46]	2159
	2160
[112]	2161	;
	2162	; This is the actual start of the BSS.
	2163	; In the past however, we have had a code-loop that went out of bounds,
	2164	; overwriting the start of the BSS.
	2165	;
	2166	; Because important runtime data is stored in the BSS, we offset it
	2167	; by 400h bytes. Since the loader-image is always 62 sectors, which
	2168	; makes it 7c00h in size, the runtime data starts at 8000h.
	2169	; This is the 'BeginOfVariables' location.
	2170	;
[37]	2171
[112]	2172
[46]	2173	;
	2174	; If segmented, offsets are relative to the BSS segment.
	2175	; They are resolved at link-time.
	2176	; If not segmented, offsets are relative to the CODE segment.
	2177	;
	2178	IFDEF SEGMENTED
[112]	2179	ORG 00400h ; 7c00h + 400h = 8000h
[46]	2180	ELSE
[112]	2181	ORG 08000h ; 8000h
[46]	2182	ENDIF
	2183
	2184
[51]	2185	; -----------------------------------------------------------------------------
	2186	; START OF BSS DATA
	2187	; -----------------------------------------------------------------------------
	2188
[7]	2189	; This space actually gets initialized in PreCrap to NUL (till EndOfVariables)
	2190	BeginOfVariables:
[112]	2191	BeginOfVariablesAbs = offset BeginOfVariables + image_size
[51]	2192
	2193
	2194	; -----------------------------------------------------------------------------
	2195	; SECTOR BUFFERS
	2196	; -----------------------------------------------------------------------------
[52]	2197	; BOOKMARK: Sector Buffers
[46]	2198	PartitionSector db 512 dup (?) ; Temporary Sector for Partition
[51]	2199	PBRSector db 512 dup (?) ; Temporary Sector for JFS/HPFS writeback
[46]	2200	LVMSector db 512 dup (?) ; Temporary Sector for LVM
	2201	TmpSector db 512 dup (?) ; Temporary Sector
[82]	2202	Scratch db 512 dup (?) ; Scratch buffer
[112]	2203	ALIGN 16
[30]	2204
[112]	2205
[51]	2206	; -----------------------------------------------------------------------------
	2207	; NEW PARTITION TABLE
	2208	; -----------------------------------------------------------------------------
[7]	2209	; Everything used to build a new IPT and reference it to the old one
[52]	2210	; BOOKMARK: New Partition Table
[46]	2211	NewPartTable db 1536 dup (?) ; New Partition Table
[112]	2212	ALIGN 16
[43]	2213
[51]	2214
	2215	; -----------------------------------------------------------------------------
	2216	; NEW HIDE PARTITION TABLE
	2217	; -----------------------------------------------------------------------------
[52]	2218	; BOOKMARK: New Hide-Partition Table
[51]	2219	NewHidePartTable db LocIPT_MaxPartitions * LocHPT_LenOfHPT dup (?)
[112]	2220	ALIGN 16
[7]	2221
[51]	2222
	2223	; -----------------------------------------------------------------------------
	2224	; NEW DRIVE LETTERS
	2225	; -----------------------------------------------------------------------------
[52]	2226	; BOOKMARK: Logical Drive-Letters
[51]	2227	NewDriveLetters db LocIPT_MaxPartitions dup (?)
[112]	2228	ALIGN 16
[7]	2229
[51]	2230
	2231	; -----------------------------------------------------------------------------
	2232	; PARTITION SIZE TABLE
	2233	; -----------------------------------------------------------------------------
[46]	2234	; Size-Table (6 bytes per partition)
[52]	2235	; BOOKMARK: Partition Size Table
[51]	2236	PartitionSizeTable db LocIPT_MaxPartitions * 6 dup (?)
[112]	2237	ALIGN 16
[46]	2238
[51]	2239
	2240	; -----------------------------------------------------------------------------
	2241	; PARTITION POINTERS
	2242	; -----------------------------------------------------------------------------
[49]	2243	; Maximum is 52 word entries till now
[52]	2244	; BOOKMARK: Partition Pointers
[46]	2245	PartitionPointers dw 52 dup (?)
[112]	2246	ALIGN 16
[46]	2247
	2248	; Count of total Partition Pointers
	2249	PartitionPointerCount db ?
[112]	2250	ALIGN 16
[46]	2251
[112]	2252
[51]	2253	; -----------------------------------------------------------------------------
	2254	; XREF TABLE
	2255	; -----------------------------------------------------------------------------
	2256
[46]	2257	; X-Reference Table (holds new partnr, index is old part nr)
[52]	2258	; BOOKMARK: Xref Table
[51]	2259	PartitionXref db LocIPT_MaxPartitions dup (?)
[112]	2260	ALIGN 16
[46]	2261
[112]	2262
[51]	2263	; -----------------------------------------------------------------------------
	2264	; VOLUME LETTERS
	2265	; -----------------------------------------------------------------------------
	2266
[46]	2267	; Volume-Letters
	2268	; 0 - no LVM support
	2269	; 1 - LVM support, but no letter
	2270	; 'C'-'Z' - assigned drive letter
[52]	2271	; BOOKMARK: Volume Drive Letters
[51]	2272	PartitionVolumeLetters db LocIPT_MaxPartitions dup (?)
[112]	2273	ALIGN 16
[46]	2274
	2275
[51]	2276	; -----------------------------------------------------------------------------
	2277	; MISC VARS AND FLAGS
	2278	; -----------------------------------------------------------------------------
[52]	2279	; BOOKMARK: Misc Vars and Flags
[46]	2280	TotalHarddiscs db ? ; Total harddrives (by POST)
	2281	LBASwitchTable db 128 dup (?) ; Bit 25-18 for CHS/LBA Switching
	2282	NewPartitions db ? ; Freshly found partitions
[37]	2283	; Independent of SaveConfiguration
[46]	2284	TooManyPartitions db ? ; Non-zero if too many partitions found
[7]	2285
[46]	2286	VideoIO_Segment dw ? ; Segment for Video I/O
[7]	2287
[46]	2288	ExtendedAbsPos dd ? ; Extended Partition Absolute Position
	2289	ExtendedAbsPosSet db ? ; If Absolute Position set
[7]	2290
[46]	2291	CurPartition_Location dw 4 dup (?) ; Where did current partition come from?
	2292	CurIO_UseExtension db ? ; 1-Use INT 13h EXTENSIONS
	2293	; (filled out by PreCrap)
	2294	CurIO_Scanning db ? ; 1-AiR-BOOT is scanning partitions
[37]	2295	; (for detailed error message)
[112]	2296	ALIGN 16
[7]	2297
	2298
[51]	2299	; -----------------------------------------------------------------------------
	2300	; MENU RELATED VARS
	2301	; -----------------------------------------------------------------------------
[46]	2302	Menu_EntrySelected db ? ; Which partition we boot this time...
	2303	Menu_UpperPart db ? ; Which number (Base=0) is the partition upper pos
	2304	Menu_AbsoluteX db ? ; Pos where Menu stuff starts
	2305	Menu_TotalParts db ? ; Copy of CFG_BootParts
	2306	Menu_TotalLines db ? ; Total Lines on Screen used for BootMenu
	2307	Menu_EntryDefault db ? ; Default Entry in filtered View
	2308	Menu_EntryLast db ? ; LastBooted Entry in filtered View
	2309	Menu_EntryAutomatic db ? ; Automatic Entry in filtered View
[7]	2310	; - All adjusted to menu locations
[112]	2311	ALIGN 16
[7]	2312
[112]	2313
[51]	2314	; -----------------------------------------------------------------------------
	2315	; PARTITION RELATED VARS
	2316	; -----------------------------------------------------------------------------
[46]	2317	PartSetup_UpperPart db ? ; Partition-Setup (like Menu_UpperPart)
	2318	PartSetup_ActivePart db ? ; Active Partition
	2319	PartSetup_HiddenUpper db ? ; (like Menu_UpperPart)
	2320	PartSetup_HiddenX db ? ; Pos for Hidden-Setup
	2321	PartSetup_HiddenAdd db ? ; Adjust for Hidden-Setup
[112]	2322	ALIGN 16
[7]	2323
[112]	2324
[51]	2325	; -----------------------------------------------------------------------------
	2326	; TIMER / SETUP RELATED VARS
	2327	; -----------------------------------------------------------------------------
[46]	2328	TimedBootEnable db ? ; Local Enable/Disable for timed boot
	2329	TimedTimeOut dd ? ; TimeOut Timer for TimedBoot (too much time here;)
	2330	TimedSecondLeft db ? ; How many seconds are left till boom ?
	2331	TimedSecondBack db ? ; To get a modification noticed
	2332	TimedBootUsed db ? ; Timed Boot used for bootup ?
	2333	FloppyGetNameTimer dd ? ; Timer for Floppy-Get-Name
	2334	SETUP_KeysOnEntry db ? ; which Shift Status was there, when booting ?
	2335	SETUP_ExitEvent db ? ; Exit Event to end SETUP
	2336	TempPasswordEntry db 17 dup (?)
	2337	SETUP_OldPwd db 17 dup (?)
	2338	SETUP_NewPwd db 17 dup (?)
	2339	SETUP_VerifyPwd db 17 dup (?)
	2340	StartSoundPlayed db ?
	2341	ChangePartNameSave db ? ; Save label after user-edit ?
	2342	SyncLvmLabels db ? ; Sync LVM labels after user-edit ?
[112]	2343	ALIGN 16
[7]	2344
[51]	2345
	2346	; -----------------------------------------------------------------------------
	2347	; FX RELATED VARS
	2348	; -----------------------------------------------------------------------------
[37]	2349	FX_UseCount dw ?
	2350	FX_OverallTimer dw ?
	2351	FX_WideScrollerTimer dw ?
	2352	FX_WideScrollerCurPos dw ?
	2353	FX_WideScrollerSpeed db ?
	2354	FX_WideScrollerSpeedState db ?
	2355	FX_WideScrollerDirection db ?
	2356	FX_WideScrollerAbsDirection db ?
	2357	FX_WideScrollerBounceSpeed db ?
	2358	FX_CooperBarsTimer dw ?
[112]	2359	ALIGN 16
[7]	2360
[51]	2361	; Dynamically Generated Tables - do not need to get initialized with NUL
	2362	FX_CooperColors db 672 dup (?) ; 7 cooper bars*96 - runtime calculated
	2363	FX_CooperState db 7 dup (?)
	2364	FX_SinusPos db 7 dup (?)
	2365	FX_CooperPos dw 7 dup (?)
[112]	2366	ALIGN 16
[51]	2367
	2368
	2369	; -----------------------------------------------------------------------------
	2370	; CHARSET BUFFER
	2371	; -----------------------------------------------------------------------------
	2372	CharsetTempBuffer db 4096 dup (?) ; Uninitialized Charset buffer
[112]	2373	ALIGN 16
[51]	2374
[112]	2375
[51]	2376	; -----------------------------------------------------------------------------
	2377	; LVM CRC TABLE
	2378	; -----------------------------------------------------------------------------
	2379	LVM_CRCTable dd 256 dup (?) ; LVM-CRC (->SPECiAL\LVM.asm)
[112]	2380	ALIGN 16
[51]	2381
[7]	2382
[51]	2383	; -----------------------------------------------------------------------------
	2384	; ECS PHASE1 RELATED
	2385	; -----------------------------------------------------------------------------
[49]	2386	Phase1Active db ?
	2387	OldPartitionCount db ?
[112]	2388	ALIGN 16
[30]	2389
[51]	2390
	2391	; -----------------------------------------------------------------------------
	2392	; DISK PARAMETERS
	2393	; -----------------------------------------------------------------------------
[37]	2394	HugeDisk db MaxDisks dup(?)
	2395	TrueSecs dd MaxDisks dup(?)
[112]	2396	ALIGN 16
[30]	2397
	2398	; BIOS geometry of the boot-drive
	2399	; Note that heads cannot be 256 due to legacy DOS/BIOS bug
	2400	; If Int13X is supported those values are used, otherwise the legacy values.
[37]	2401	BIOS_Cyls dd MaxDisks dup(?)
	2402	BIOS_Heads dd MaxDisks dup(?)
	2403	BIOS_Secs dd MaxDisks dup(?)
	2404	BIOS_Bytes dw MaxDisks dup(?)
	2405	BIOS_TotalSecs dq MaxDisks dup(?)
[112]	2406	ALIGN 16
[30]	2407
	2408	; LBA geometry of the boot-drive
	2409	; Note that these values are taken from the BPB of a partition boot-record
[37]	2410	LVM_Cyls dd MaxDisks dup(?)
	2411	LVM_Heads dd MaxDisks dup(?)
	2412	LVM_Secs dd MaxDisks dup(?)
	2413	LVM_Bytes dw MaxDisks dup(?)
	2414	LVM_TotalSecs dq MaxDisks dup(?)
[119]	2415	LVM_MasterSecs dd MaxDisks dup(?)
[112]	2416	ALIGN 16
[30]	2417
	2418	; OS/2 geometry of the boot-drive
	2419	; Note that these values are taken from the BPB of a partition boot-record
[37]	2420	LOG_Cyls dd MaxDisks dup(?)
	2421	LOG_Heads dd MaxDisks dup(?)
	2422	LOG_Secs dd MaxDisks dup(?)
	2423	LOG_Bytes dw MaxDisks dup(?)
	2424	LOG_TotalSecs dq MaxDisks dup(?)
[112]	2425	ALIGN 16
[30]	2426
[112]	2427	; Storage for INT13 disk parameters
	2428	INT13_DiskParams db MaxDisks dup(10h dup(?))
	2429	ALIGN 16
	2430
	2431	; Storage for INT13X disk parameters
	2432	INT13X_DiskParams db MaxDisks dup(80h dup(?))
	2433	ALIGN 16
	2434
[51]	2435	; Get's initialized at startup to: 00000011111111111111111111111100b
	2436	; Meaning A,B not free; C-Z free, rest unused. (right to left)
	2437	; Each partition with an assigned drive-letter clears a bit in this map.
	2438	FreeDriveletterMap dd ?
[112]	2439	ALIGN 16
[30]	2440
[51]	2441	; LBA address of master LVM sector, zero if non-existant
[112]	2442	MasterLVMLBA dd MaxDisks dup(?)
	2443	ALIGN 16
[30]	2444
[128]	2445	; Array of DISKINFO structures
	2446	DiskInformation db MaxDisks dup(DISKINFO_Size dup(?))
	2447	ALIGN 16
[51]	2448
	2449	; -----------------------------------------------------------------------------
[105]	2450	; INT13X DAP
[51]	2451	; -----------------------------------------------------------------------------
[105]	2452
	2453	; Disk Address Package that holds information for LBA-access using INT13X
	2454	INT13X_DAP db ? ; Size of paket, inserted by code
	2455	db ? ; Reserved
	2456	INT13X_DAP_NumBlocks dw ? ; Number of blocks
	2457	INT13X_DAP_Transfer dd ? ; Transfer Adress
	2458	INT13X_DAP_Absolute dd ? ; Absolute Sector
	2459	dd ? ; Second Part of QWORD
	2460	INT13X_DAP_Size = $-offset [INT13X_DAP] ; Calculated size
[112]	2461	ALIGN 16
[105]	2462
[46]	2463	;
[52]	2464	; BOOKMARK: Temporary buffer for 48h INT13X bios call.
[46]	2465	;
[30]	2466
[46]	2467	; Size of the buffer.
	2468	; this param must be filled in.
	2469	; Code inserts it.
	2470	i13xbuf dw 1 dup (?)
[30]	2471
[46]	2472	; The buffer itself.
	2473	db 126 dup(?)
	2474
	2475	; Size of buffer calculated.
	2476	; (excluding the size word at the start).
	2477	i13xbuf_size = $-offset i13xbuf-2
[112]	2478	ALIGN 16
[46]	2479
	2480	; Some debug area.
[89]	2481	dbg_scratch db 512 dup(?)
[112]	2482	ALIGN 16
[44]	2483
[51]	2484
	2485	; End of transient variables.
	2486	EndOfVariables:
[112]	2487	EndOfVariablesAbs = offset EndOfVariables + image_size
[51]	2488
	2489
	2490
	2491	; -----------------------------------------------------------------------------
	2492	; OLD AND NEW STACKS
	2493	; -----------------------------------------------------------------------------
[52]	2494	; BOOKMARK: Storage for Old and New Stack Pointers
[51]	2495	;
	2496	; These need to be outside the variable section because AiR-BOOT can restart
	2497	; itself in debug-mode. If the OldSP and OldSS would be in the variable area,
	2498	; they would be cleared on AiR-BOOT restart.
	2499	;
	2500
	2501	; The variable section is cleared word-wise, so it could clear one byte extra
	2502	; depending on the alignment and size. This DD prevents the OldSP and OldSS
	2503	; to be partly overwritten by the clearing routine.
	2504	dd ?
[112]	2505	ALIGN 16
[51]	2506
	2507	; SS:SP from before our relocation.
	2508	; The registers values when the BIOS transferred control to us were pushed
	2509	; on this stack.
	2510
	2511	OldSP dw ?
	2512	OldSS dw ?
	2513
	2514	; SS:SP currently in use.
	2515	; They are temporarily dumped here so we can pop the resgisters from
	2516	; the old stack to display them in debug mode.
	2517	CurrentSP dw ?
	2518	CurrentSS dw ?
[112]	2519	ALIGN 16
[51]	2520	;
	2521	; End of BSS segment.
	2522	;
[30]	2523	eobss:
[112]	2524	eobss_abs = offset eobss + image_size
[51]	2525	;
[97]	2526	; Total RAM occupied, including BSS.
	2527	; BASE is 8000:0000, LIMIT is 8000:FFFF.
	2528	; Note that the LDRIMAGE is of constant size, 7C00h = 62 sectors of 512 bytes.
	2529	;
[112]	2530	resident_size = offset eobss + image_size
[97]	2531
	2532	;
[51]	2533	; Close BSS segment.
	2534	;
[37]	2535	IFDEF SEGMENTED
[46]	2536	VOLATILE ENDS
[37]	2537	ELSE
[46]	2538	LDRIMAGE ENDS
[37]	2539	ENDIF
[43]	2540
[52]	2541	; BOOKMARK: End of Module
[45]	2542	END AiR_BOOT
[30]	2543

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: trunk/bootcode/airboot.asm@ 128

Download in other formats: