com.github.LongSoft.UEFITool
UEFI firmware image viewer and editor
Size | 3.7 KiB |
---|---|
Entropy | 4.62 |
GUID | 463191c7-fade-51b1-a0ba-eef794d26632 |
SHA256 | 6ce7c9c352239533c05422d46c1fa0538b6805509770150e2358419e85f3b5d8 |
SHA1 | da0f9d6c3bb4b3d6158a98e7147ddcdbbcddf657 |
com.intel.Microcode.000A0660.00000080
Intel CPU Microcode
Size | 94.0 KiB |
---|---|
Entropy | 7.99 |
GUID | 3f0229ad-0a00-5269-90cf-0a45d8781b72 |
SHA256 | fad561620b8db6ab32b7a266bc2fa6915bde51d9a483e7c136acb42b2e78a198 |
SHA1 | 363059f4a762a36a5e6343af6155b025dc7fadac |
org.uefi.Peim
Set TPM device type This module initializes TPM device type based on variable and detection. NOTE: This module is only for reference only, each platform should have its own setup page.
Size | 20.1 KiB |
---|---|
Entropy | 6.65 |
GUID | eadd5061-93ef-4ccc-8450-f78a7f0820f0 |
SHA256 | dce1daac06baf80d557e474461924a8c446840785a7bd9ba2d63aa332f353103 |
SHA1 | 4479b93be3b55528e4ba5ef222e5022bbae0d0e7 |
org.uefi.Peim.PeiVariable
Implements ReadOnly Variable Services required by PEIM and installs PEI ReadOnly Varaiable2 PPI. This module implements ReadOnly Variable Services required by PEIM and installs PEI ReadOnly Varaiable2 PPI.
Size | 4.1 KiB |
---|---|
Entropy | 6.15 |
GUID | 34c8c28f-b61c-45a2-8f2e-89e46becc63b |
SHA256 | a9de7565f46574e5987481e30931c145774fadfea3250675e723a0dec5e19502 |
SHA1 | 7137180fbae4169a058ffb0bb87412dab3e8fabe |
org.uefi.Peim.AmtStatusCodePei
The Pre-EFI Initialization phase is invoked early in the boot flow.
Size | 1.0 KiB |
---|---|
Entropy | 3.4 |
GUID | a6aef1f6-f25a-4082-af39-2229bcf5a6e1 |
SHA256 | ff1905c15ddcda368d0a5787429cb20c8f702c36dde719373cca873ecb2c246a |
SHA1 | ca38e9b642c3de5fe71c3a74730e1dbb27a8897b |
org.uefi.Peim.PcatSingleSegmentPciCfg2Pei
Provides read, write and modify access to PCI configuration space in PEI phase. To follow PI specification, these services also support access to the unaligned PCI address.
Size | 1.8 KiB |
---|---|
Entropy | 4.49 |
GUID | 4f1f379f-2a62-48bb-ac34-d3f135c6e2b7 |
SHA256 | 562047d9b40d2bf5c42ec6d347465ba04f17bcdf78a5ac0a48ea89d1b7422c47 |
SHA1 | 25d50c329d74dae95f5f6b1a1707ad3fc6f088c4 |
org.uefi.Peim.DxeIpl
Last PEIM executed in PEI phase to load DXE Core from a Firmware Volume. This module produces a special PPI named the DXE Initial Program Load (IPL) PPI to discover and dispatch the DXE Foundation and components that are needed to run the DXE Foundation.
Size | 15.0 KiB |
---|---|
Entropy | 6.58 |
GUID | 86d70125-baa3-4296-a62f-602bebbb9081 |
SHA256 | 1dc74b9f0161bf5bd9795d2e47731b8e7d454f916c55e9fa9a3cf91b706f521f |
SHA1 | b1165d161fa282f1a2e132e0940b0d8be95ae04a |
org.uefi.Peim.PhysicalPresencePei
Produces a PPI to indicate whether to lock TPM in PEI phase This module produces PEI_LOCK_PHYSICAL_PRESENCE_PPI to indicate whether TPM physical presence needs to be locked. It can be replaced by a platform specific module.
Size | 1.1 KiB |
---|---|
Entropy | 3.42 |
GUID | 4fe772e8-fe3e-4086-b638-8c493c490488 |
SHA256 | efaeab405e127962ea74c96737a603859eaaf4a64c1d5607c47d1d5204ae3212 |
SHA1 | 4a1c9533460235240ada2064a6dcdaccf4eef32d |
org.uefi.Peim.IntelVTdPmrPei
The Pre-EFI Initialization phase is invoked early in the boot flow.
Size | 5.4 KiB |
---|---|
Entropy | 6.32 |
GUID | f906769f-4aed-4a0d-8c7c-ff21b9d1051a |
SHA256 | f1d206add24f79a518117b588fce1912026a82a2d3d706e4ba43ef611d227d58 |
SHA1 | b751b3ad5de1f6d6c3b45b7ef92ccc4a4e995bba |
org.uefi.Peim.PlatformVTdInfoSamplePei
The Pre-EFI Initialization phase is invoked early in the boot flow.
Size | 2.8 KiB |
---|---|
Entropy | 5.7 |
GUID | 6cff6068-4fd3-4779-95b8-4dfc90722371 |
SHA256 | b7c2bafb1b43af2e6c49f34b7f110f930607cedefaed7767091538d819fda643 |
SHA1 | 8236fde60f6701466102760769be86e6550797b5 |
org.uefi.Peim.CpuIoPei
Produces the CPU I/O PPI by using the services of the I/O Library.
Size | 2.5 KiB |
---|---|
Entropy | 5.49 |
GUID | ae265864-cf5d-41a8-913d-71c155e76442 |
SHA256 | 43602f0588396954ba5a6c61f38c1628a42aaedc3562e8046f18224d1a531461 |
SHA1 | 548883784ab289645b3b1c866dbf0d581963779e |
org.uefi.Peim.FaultTolerantWritePei
Fault Tolerant Write PEI Driver. This module installs gEdkiiFaultTolerantWriteGuid PPI to inform the check for FTW last write data has been done.
Size | 1.5 KiB |
---|---|
Entropy | 4.75 |
GUID | aac33064-9ed0-4b89-a5ad-3ea767960b22 |
SHA256 | 3b3b521c72fc9f3b26dae4c728135c6bc52b3773f12423f69ac17306b1695a38 |
SHA1 | 151bdec2f6499104e4addc0f5730301fb8f37a06 |
org.uefi.Driver.BCVersion
Size | 7.6 KiB |
---|---|
Entropy | 4.75 |
GUID | 3c23ed00-56b9-4b3d-96b6-44db8faf2e6b |
SHA256 | ded414d84c03fbd2328834f3c9ce7e11be94f59cd2da6c8e652c612c1bc96c4e |
SHA1 | 71a6e8108ea22cf956cd7937f36aef8a4bc3a3c9 |
org.uefi.Peim.PlatformInit
Platform Initialization Firmware Volume Specification that the Intel Firmware Support Package follows.
Size | 60.8 KiB |
---|---|
Entropy | 6.65 |
GUID | 59add62d-a1c0-44c5-a90f-a1168770468c |
SHA256 | ad495d150a4cea73c816dbc894ac3f85ce4ee0f02eded6824a5a0fa330570689 |
SHA1 | 2f26ce677bcec6d66877f635c95618e288c867a3 |
org.uefi.Peim.PlatformInit
Platform Initialization Firmware Volume Specification that the Intel Firmware Support Package follows.
Size | 60.8 KiB |
---|---|
Entropy | 6.65 |
GUID | 59add62d-a1c0-44c5-a90f-a1168770468c |
SHA256 | 50723befa0cebf7e4697525b2fb71030f73cf5b0bb52a8ff37f68d32922c69dd |
SHA1 | 7879fd61f4ab967d23165312af6652c1dcff8db1 |
org.uefi.Driver.DellConnectionMgr
Size | 23.6 KiB |
---|---|
Entropy | 5.89 |
GUID | 9e90e60f-fd1e-4b01-ba6e-9fde5a02e60b |
SHA256 | 69c45a4a1fcac3f60b41f8b28dbb1f4d12c38f253e5520d54b2af279f09a86bd |
SHA1 | 5891d8bad319e1c338866b7385f3fdb2e1ede652 |
org.uefi.Driver
Size | 155.0 KiB |
---|---|
Entropy | 6.18 |
GUID | 05b17ef3-26cb-444a-82f7-92705cfb6b1e |
SHA256 | 8e9d24d0a73f7e71ae746dd6e8d7730658005457620043df938b5b486b16278f |
SHA1 | 399360d31aef4d0f683a38e08c0e0651012e3715 |
org.uefi.Driver
Size | 228.7 KiB |
---|---|
Entropy | 3.78 |
GUID | 63c64ece-da83-479d-b382-f4939072c80d |
SHA256 | c55901030414513d32cae6d6a3361161d2ca60ee5edea9b006ba59e92b2bbc5a |
SHA1 | 6eb26818dab7802b68f65d0d44d348da0005413f |
org.uefi.Driver.ATH9K_UndiLayer
Size | 454.1 KiB |
---|---|
Entropy | 5.23 |
GUID | c146b184-8891-49d3-b734-cacdd84fc942 |
SHA256 | 4abd84da13a763644c04ad2f32cb7084235566a0a9943b460d5564ebf791d45b |
SHA1 | 98cfabffc2048ebdde63f2b05bf6225cfe5d5900 |
org.uefi.Driver.AthQCA6174Undi
Size | 1016.6 KiB |
---|---|
Entropy | 6.68 |
GUID | 6cd3857b-1a86-4734-814d-8302e514ae79 |
SHA256 | e3c07fb18db9c8734dfc2a53a684423e238aecb58f529b0a685ea4c92aa97032 |
SHA1 | 1692459cab9d2b2e419b7dabacb57c6f1d2b8e09 |
org.uefi.Driver.WiFiSupplicant
Size | 597.6 KiB |
---|---|
Entropy | 6.08 |
GUID | 8d7f9b78-fe02-41f7-b515-0841c429654b |
SHA256 | e736ae9d1f667c8a8b0de4047730ee7e1302e664e981a10a23ec1ad2c7614551 |
SHA1 | 7d074a4e0fe33a206cb235ae7a2ce3786418ce9f |
org.uefi.Driver.AthQCA9377Undi
Size | 848.1 KiB |
---|---|
Entropy | 6.51 |
GUID | 86c17f69-6a91-451a-86b6-f92ebc602831 |
SHA256 | 44a7cea56dfc4c88f48b4d556b3d6ae76e45fdf641597c4dc1884c57e7bc8042 |
SHA1 | 227b164755723e67c673a7e84a1906be1a41e256 |
com.intel.Microcode.000A0660.00000080
Intel CPU Microcode
Size | 94.0 KiB |
---|---|
Entropy | 7.99 |
GUID | 3f0229ad-0a00-5269-90cf-0a45d8781b72 |
SHA256 | 032555cdc0b053e345cbfbcebf41e625277f1ccb18049e42581b06660b758e01 |
SHA1 | abfd55534ed20c31e8c56aa8c975d3081fd8b32a |
org.uefi.Peim.BiosInfoRecovery
Size | 2.4 KiB |
---|---|
Entropy | 3.04 |
GUID | 230f6679-f703-4dc2-b2b7-41c670bcc0d1 |
SHA256 | 8c5a78ee9086d07a92fc7efb2ec8c2d7a9a0e3ac67e84d3d57f83a91f498337b |
SHA1 | 0354e84b7efee88e957e9e6bd5ae4b20c466075f |
org.uefi.Peim.ReportFvRecoveryPei
The Pre-EFI Initialization phase is invoked early in the boot flow.
Size | 1.1 KiB |
---|---|
Entropy | 3.67 |
GUID | dfb36c78-e534-4e05-9d5d-1803f36e88f2 |
SHA256 | a03e6b6dfef2e2b92b9c45604ec6012bab78e88b8c1acd7e6688a607acaca70b |
SHA1 | 52ecacd03d1b99f0c76bf074c049df989ec34384 |
org.uefi.Pei.PeiCore
PeiMain module is core module in PEI phase. It takes initializes memory, dispatches PEIM from discovered and then hands-off control to DxeIpl to load DXE core and enter DXE phase.
Size | 29.7 KiB |
---|---|
Entropy | 6.62 |
GUID | 52c05b14-0b98-496c-bc3b-04b50211d680 |
SHA256 | cd0520545931957bd2d30c0bcc4a17c414508eccaa61b7f2868dd134c84b3f62 |
SHA1 | 93fc7fa951c3abce59c7b6a3228a17e36791a4a8 |
org.uefi.Peim.BiosInfo
Size | 2.5 KiB |
---|---|
Entropy | 4.33 |
GUID | 4a4ca1c6-871c-45bb-8801-6910a7aa5807 |
SHA256 | 098f24f057c308420ca7672aabd3c1fbca1c1d2e53be6bb71120a428ed60e4a6 |
SHA1 | 24db02870fb35e6f58aa5ca67e32067058a64579 |
org.uefi.Peim.BiosInfoChecker
Size | 1.5 KiB |
---|---|
Entropy | 4.82 |
GUID | 9581983a-3663-46f0-83ec-8a0506eb63e7 |
SHA256 | eed45c720042915926f02c5bfe842dbad2105b98e3d5076e6dad6978b3ba6d22 |
SHA1 | f79d98ced44a2b8a2824dd57b5e79ba66c460012 |
org.uefi.Peim.DellTrustChainingPei
The Pre-EFI Initialization phase is invoked early in the boot flow.
Size | 6.8 KiB |
---|---|
Entropy | 6.49 |
GUID | 84e90ba3-cb79-4267-ae2f-437b86daa6f4 |
SHA256 | b2948bd5ceff1fcbe5d1c57a5c1e3c50b4e6e1eda336ad2c065e957b52c127ea |
SHA1 | d8e04aed16727de773a87df19e3276f902acaa89 |
org.uefi.Peim
Set TPM device type This module initializes TPM device type based on variable and detection. NOTE: This module is only for reference only, each platform should have its own setup page.
Size | 20.1 KiB |
---|---|
Entropy | 6.64 |
GUID | eadd5061-93ef-4ccc-8450-f78a7f0820f0 |
SHA256 | 76f86d6c48bfaa2fdd32d5aae2110f1ba8deb571740aaf92b23075088a31ba12 |
SHA1 | 5b4608ab1442a8c649dd0513141edbb030fe6124 |
org.uefi.Peim.PeiVariable
Implements ReadOnly Variable Services required by PEIM and installs PEI ReadOnly Varaiable2 PPI. This module implements ReadOnly Variable Services required by PEIM and installs PEI ReadOnly Varaiable2 PPI.
Size | 4.1 KiB |
---|---|
Entropy | 6.14 |
GUID | 34c8c28f-b61c-45a2-8f2e-89e46becc63b |
SHA256 | 27114e7ad1e2ee5f10ba6f12b5ce0e0dcb148533a7c2f7843746c33a83cf8872 |
SHA1 | 565513104667ba25bb11c018293a2b88233f7669 |
org.uefi.Peim.AmtStatusCodePei
The Pre-EFI Initialization phase is invoked early in the boot flow.
Size | 1.0 KiB |
---|---|
Entropy | 3.4 |
GUID | a6aef1f6-f25a-4082-af39-2229bcf5a6e1 |
SHA256 | dd1b283e61c7454523c3088e4c71324555001d6d72e8f5ffd5d9ec67d3b197de |
SHA1 | df731d9236c9be6994431ec91095190037b3040f |
org.uefi.Peim.PcatSingleSegmentPciCfg2Pei
Provides read, write and modify access to PCI configuration space in PEI phase. To follow PI specification, these services also support access to the unaligned PCI address.
Size | 1.8 KiB |
---|---|
Entropy | 4.49 |
GUID | 4f1f379f-2a62-48bb-ac34-d3f135c6e2b7 |
SHA256 | 96459b13b77bedf2ff59d98534710b962918ce1498de792594b6e60b4855630b |
SHA1 | aced8a224ba43f839c6d712a502216af1827c38a |
org.uefi.Peim.DxeIpl
Last PEIM executed in PEI phase to load DXE Core from a Firmware Volume. This module produces a special PPI named the DXE Initial Program Load (IPL) PPI to discover and dispatch the DXE Foundation and components that are needed to run the DXE Foundation.
Size | 15.0 KiB |
---|---|
Entropy | 6.58 |
GUID | 86d70125-baa3-4296-a62f-602bebbb9081 |
SHA256 | ceffe2277fbbffa75a1a5cfb4a7db80cd74ea0051c83994c6d9074ceae90f271 |
SHA1 | ac5f2e98726c7b512b8709eade65b236252be6be |
org.uefi.Peim.PhysicalPresencePei
Produces a PPI to indicate whether to lock TPM in PEI phase This module produces PEI_LOCK_PHYSICAL_PRESENCE_PPI to indicate whether TPM physical presence needs to be locked. It can be replaced by a platform specific module.
Size | 1.1 KiB |
---|---|
Entropy | 3.42 |
GUID | 4fe772e8-fe3e-4086-b638-8c493c490488 |
SHA256 | 9caaa51c75c1ef377c15b4012fa1511e1c475583cca2d468eb07dc7d6a2004a7 |
SHA1 | 76aade2672e3f5347beb56d3ad484a3754db81b2 |
org.uefi.Peim.IntelVTdPmrPei
The Pre-EFI Initialization phase is invoked early in the boot flow.
Size | 5.4 KiB |
---|---|
Entropy | 6.32 |
GUID | f906769f-4aed-4a0d-8c7c-ff21b9d1051a |
SHA256 | f64cdf743d353c44b86daf7356ceb31d4201d53a061e62d9fedbc48cd94bcfba |
SHA1 | 4378bf9d63853d25d7bb98e130ccbeb6345948fc |
org.uefi.Peim.PlatformVTdInfoSamplePei
The Pre-EFI Initialization phase is invoked early in the boot flow.
Size | 2.8 KiB |
---|---|
Entropy | 5.7 |
GUID | 6cff6068-4fd3-4779-95b8-4dfc90722371 |
SHA256 | 96a3a5fdd981b0729fbc9763b279a5eb3bd7dc3b15005698dca2905f151576c2 |
SHA1 | 7b018529507242b6ffab64e70209e7ff2d38b003 |
org.uefi.Peim.CpuIoPei
Produces the CPU I/O PPI by using the services of the I/O Library.
Size | 2.5 KiB |
---|---|
Entropy | 5.49 |
GUID | ae265864-cf5d-41a8-913d-71c155e76442 |
SHA256 | 68e271326a61b8e3afcbfab85842e9d042d6448e48ffbd9fbae9efa4c3d3ce21 |
SHA1 | aa71dea11a39d48d20a5c56d828ad29dd76070d1 |
org.uefi.Peim.FaultTolerantWritePei
Fault Tolerant Write PEI Driver. This module installs gEdkiiFaultTolerantWriteGuid PPI to inform the check for FTW last write data has been done.
Size | 1.5 KiB |
---|---|
Entropy | 4.75 |
GUID | aac33064-9ed0-4b89-a5ad-3ea767960b22 |
SHA256 | 26e9a6f33212ba0eff52111b20215277d48ad5dfe9023c1889e5cc70bdb16c2b |
SHA1 | 9b8bbb09d488ec5bcb2e709831684901e8fa5afc |
Zlib
Size | 25.2 MiB |
---|---|
Entropy | 5.76 |
GUID | 68b8cc0e-4664-5c7a-9ce3-8ed9b4ffbffb |
SHA256 | d5ec0bfaed5b5ae97eadfe9b78b441fa2f2a337170e3c3f5b058be3625f584da |
SHA1 | 626b69f58353b800760d2a8cbf2f5a24179b7971 |
Zlib
Size | 3.4 MiB |
---|---|
Entropy | 7.65 |
GUID | 68b8cc0e-4664-5c7a-9ce3-8ed9b4ffbffb |
SHA256 | 8ff4d7d829541a96e41009f80aaf56ce6bf1c2aa4910bfe01b4cb04f2e2824e5 |
SHA1 | ebd7f6a83a95c23b45ec9480995d4648ea02511c |
LVFS © 2015 Richard Hughes with icons from Font Awesome and GeoIP data from IP2Location.
Linux Vendor Firmware Service Project a Series of LF Projects, LLC :: Charter