Title:Simplified magnet design and manufacture based on patterning of wide conductors

Abstract:The fabrication and assembly of High Temperature Superconducting (HTS) magnets can be significantly streamlined by (1) direct deposition of HTS onto modular components and (2) laser-ablated grooves to bound and guide the electric currents over the superconducting surfaces. "Coils" bounded by consecutive grooves can be individually powered, or connected in series, or in parallel. Applications include plasma-confinement devices such as stellarators and magnets for particle accelerators. On the way to HTS magnets generating more complicated three-dimensional fields, this paper validates the technique for two cylindrically symmetric magnets made of standard conductors. The optimized grooving pattern is considered as an inverse problem that is resolved using a least squares approach with Tikhonov regularization. This approach was first applied to design a magnet that replicates the magnetic field configuration of a microwave source of the gyrotron type. Gyrotrons require a particular profile of magnetic field, which our aluminium prototype successfully reproduced with 10$^{-1}$ precision. The second one, in copper, is a small-size, reduced-field magnet for Magnetic Resonance Imaging (MRI). This application requires highly uniform longitudinal fields. The achieved precision (about 50 ppm) is exceptional for an MRI magnet just getting out of the factory, and can easily meet hospital standards after minimal shimming or other error field correction. Future work and other potential applications of wide, patterned conductors or superconductors are also discussed.