7 replies to this topic

[mdiv]

Hi Fellas,

Just recieved an old JK Eurosport chassis kit from a fellow slotblogger for a song.

No instructions on how to build it come with the packaging and I can't find any info on the web that points to it.

Attached is a pic of the chassis kit. Anyone out there familiar or can give some tips?

Thanks!

Mikey

[Zippity]

I've got one of those

I'll have a look tonight when I get home to see if I still have the instructions

[mdiv]

Sweet! Thanks Ron!

Mikey

[Dominator]

Here a couple of pics of one I had.

[Zippity]

As promised

Attached Images

• 

[mdiv]

Thanks a ton fellas, really appreciate it!

Onward!

Mikey

[Craig]

I did this drawing for a guy a few years back. I hope this helps some.

[Mopar Rob]

We never made such an elaborate front end assembly. Just usually a piece of .039" piece of piano wire bent in a "U" soldered to the plumber section under the front guide tongue to act as the up stop and down stop for the center section. Also did a much simpler front wheels





This picture of an old 1/32 C can Eurosport was built by Chuck, the guy who designed your kit and and made the build drawing that Zipity posted.

I don't have any of my chassis to show but I usually used a piece of spring steel in place of the front "U" bent wire.