Nome | Cor | |
4 X Plate, Round 1 x 1 with Open Stud | White |   | |
1 X Plate, Round 1 x 1 with Open Stud | White |   | |
1 X Egg with Hole on Top | White |   | |
2 X Tile, Modified 1 x 1 with Open O Clip | White |   | |
8 X Tile, Round 1 x 1 Quarter | White |   | |
1 X Tile, Round 1 x 1 Quarter | White |   | |
2 X Wedge 2 x 1 with Stud Notch Left | White |   | |
4 X Plate, Modified 1 x 1 with Tooth Vertical | White |   | |
3 X Plate, Modified 1 x 1 with Tooth Horizontal | White |   | |
2 X Minifigure, Headgear Crown with 5 Points, Open Center Stud | White |   | |
1 X Wedge, Plate 3 x 2 Left | White |   | |
2 X Wedge 2 x 1 with Stud Notch Right | White |   | |
1 X Wedge, Plate 3 x 2 Right | White |   | |
2 X Wedge, Plate 4 x 2 Left | White |   | |
2 X Wedge, Plate 4 x 2 Right | White |   | |
2 X Slope 30 1 x 2 x 2/3 | White |   | |
2 X Brick, Modified 1 x 2 with Studs on 2 Sides | White |   | |
2 X Tile, Round 2 x 2 with Open Stud | White |   | |
8 X Plate 1 x 2 | White |   | |
2 X Hinge Plate 1 x 2 Locking with 1 Finger On Top | White |   | |
5 X Slope, Curved 2 x 1 | White |   | |
8 X Bracket 1 x 2 - 2 x 2 | White |   | |
1 X Wedge 4 x 4 No Studs | White |   | |
1 X Wedge 3 x 4 x 2/3 Cutout | White |   | |
2 X Plate 1 x 6 | White |   | |
2 X Tile, Round Corner 2 x 2 Macaroni | White |   | |
2 X Tile 2 x 2 Corner | White |   | |
2 X Plate, Modified 1 x 2 with Bar Handle on End - Closed Ends | White |   | |
1 X Tile, Modified 2 x 3 Pentagonal | White |   | |
2 X Plate 1 x 3 | White |   | |
4 X Slope, Curved 3 x 1 | White |   | |
6 X Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom | White |   | |
1 X Plate 2 x 3 | White |   | |
1 X Hinge Plate 1 x 4 Locking Dual 1 Fingers on Side | White |   | |
2 X Slope, Curved 4 x 1 Inverted | White |   | |
1 X Slope, Curved 4 x 1 Double | White |   | |
2 X Technic, Brick Modified 2 x 2 with Ball Receptacle Wide and Axle Hole | White |   | |
2 X Wedge 4 x 3 No Studs | White |   | |
1 X Cattle Horn - Long | White |   | |
9 X Slope, Curved 2 x 2 with Black Flames on White Background Pattern | White |   | |
1 X Plate, Modified 1 x 2 with 3 Teeth (Claws) | White |   | |
1 X Tile, Modified 1 x 1 with Open O Clip | Tan |   | |
2 X Slope, Curved 1 x 1 Double | Tan |   | |
4 X Technic, Gear 12 Tooth Bevel | Tan |   | |
2 X Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent | Tan |   | |
4 X Plate, Modified 1 x 1 with Tooth Horizontal | Tan |   | |
1 X Hot Dog Bun | Tan |   | |
2 X Brick, Modified 1 x 2 Log | Tan |   | |
2 X Plate 1 x 2 | Tan |   | |
9 X Plate, Modified 1 x 2 with 3 Teeth (Claws) | Tan |   | |
1 X Slope, Curved 2 x 2 x 2/3 with Two Studs and Curved Sides | Tan |   | |
1 X Plate 1 x 4 | Tan |   | |
12 X Plate, Round 1 x 1 | Red |   | |
1 X Plate, Round 1 x 1 | Red |   | |
1 X Tile, Modified 1 x 1 Half Circle Extended (Stadium) | Red |   | |
1 X Tile, Modified 1 x 1 Half Circle Extended (Stadium) | Red |   | |
2 X Brick, Modified 1 x 1 with Stud on 1 Side | Red |   | |
2 X Slope 30 1 x 1 x 2/3 | Red |   | |
1 X Slope 30 1 x 1 x 2/3 | Red |   | |
8 X Brick, Modified 1 x 1 with Headlight | Red |   | |
1 X Hot Dog / Sausage | Red |   | |
9 X Technic, Pin with Friction Ridges Lengthwise and Tow Ball | Red |   | |
5 X Technic, Pin Connector Round 2L with Slot (Pin Joiner Round) | Red |   | |
1 X Brick, Round 2 x 2 with Axle Hole | Red |   | |
2 X Slope 45 2 x 1 with 2/3 Cutout | Red |   | |
4 X Plate, Modified 1 x 2 with Pin Hole on Bottom | Red |   | |
2 X Plate, Modified 1 x 8 with Door Rail | Red |   | |
2 X Plate 2 x 10 | Red |   | |
2 X Plate, Modified 1 x 2 with Clip on Top | Red |   | |
6 X Plate 1 x 2 | Red |   | |
1 X Tile, Modified 1 x 2 with 2 Teeth Vertical | Red |   | |
1 X Tile 1 x 2 with Groove | Red |   | |
2 X Bracket 1 x 2 - 2 x 2 Inverted | Red |   | |
3 X Bracket 1 x 2 - 1 x 2 Inverted | Red |   | |
2 X Plate 2 x 2 | Red |   | |
4 X Slope, Curved 4 x 1 Double | Red |   | |
1 X Plate 2 x 4 | Red |   | |
1 X Plate, Round Corner 2 x 6 Double | Red |   | |
1 X Dinosaur Tail End Section / Horn | Red |   | |
1 X Plate 2 x 6 | Red |   | |
1 X Dinosaur Tail / Neck Middle Section with Pin | Red |   | |
3 X Brick 1 x 2 | Red |   | |
2 X Slope, Curved 2 x 2 | Red |   | |
1 X Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side | Red |   | |
2 X Slope, Curved 3 x 1 | Red |   | |
2 X Hinge Plate 1 x 2 Locking with 2 Fingers on End and 7 Teeth without Bottom Groove | Light Bluish Gray |   | |
2 X Minifigure, Utensil Handlebars with Angular Handles | Light Bluish Gray |   | |
1 X Bracket 2 x 2 - 2 x 2 with 2 Holes | Light Bluish Gray |   | |
1 X Plate, Modified 2 x 4 with Pin Holes | Light Bluish Gray |   | |
1 X Projectile Arrow, Solid Shaft with Black Cross Shaped Rubber End | Light Bluish Gray |   | |
1 X Plate, Modified 1 x 1 Rounded with Bar Handle | Light Bluish Gray |   | |
2 X Minifigure, Utensil Hose Nozzle Elaborate | Light Bluish Gray |   | |
1 X Minifigure, Utensil Hose Nozzle Elaborate | Light Bluish Gray |   | |
15 X Plate, Round 2 x 2 with Axle Hole | Light Bluish Gray |   | |
4 X Technic, Pin without Friction Ridges Lengthwise | Light Bluish Gray |   | |
1 X Technic, Pin without Friction Ridges Lengthwise | Light Bluish Gray |   | |
2 X Bracket 1 x 2 - 1 x 2 | Light Bluish Gray |   | |
2 X Slope, Curved 2 x 2 Inverted | Light Bluish Gray |   | |
3 X Plate, Modified 1 x 2 with Small Tow Ball Socket on End | Light Bluish Gray |   | |
4 X Tile, Modified 1 x 1 with Open O Clip | Dark Bluish Gray |   | |
2 X Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side | Dark Bluish Gray |   | |
1 X Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side | Dark Bluish Gray |   | |
1 X Wedge, Plate 2 x 2 Right | Dark Bluish Gray |   | |
1 X Wedge, Plate 2 x 2 Left | Dark Bluish Gray |   | |
4 X Brick, Modified 1 x 2 Log | Dark Bluish Gray |   | |
4 X Technic, Brick 1 x 2 with Hole | Dark Bluish Gray |   | |
4 X Plate, Modified 1 x 2 with Bar Handle on Side with Free Ends | Dark Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Tow Ball on Side | Dark Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Small Tow Ball Socket on Side | Dark Bluish Gray |   | |
2 X Slope, Inverted 45 2 x 2 | Dark Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Tow Ball and Small Tow Ball Socket on Ends | Dark Bluish Gray |   | |
1 X Brick 2 x 3 | Dark Bluish Gray |   | |
4 X Technic, Brick Modified 2 x 2 with Pin Hole, Rotation Joint Socket | Dark Bluish Gray |   | |
1 X Technic, Axle 4 with Stop | Dark Bluish Gray |   | |
1 X Technic, Brick Modified 2 x 2 with Ball and Axle Hole with 6 Holes in Ball | Dark Bluish Gray |   | |
2 X Technic, Brick 1 x 4 with Holes | Dark Bluish Gray |   | |
2 X Technic, Brick Modified 2 x 2 with Pin Hole, Rotation Joint Ball Half (Horizontal Top) | Dark Bluish Gray |   | |
1 X Projectile Launcher, Large Spring Shooter with Light Bluish Gray Top | Dark Bluish Gray |   | |
1 X Plate 4 x 10 | Dark Bluish Gray |   | |
1 X Brick, Modified 1 x 1 with Headlight | Dark Bluish Gray |   | |
4 X Slope, Curved 2 x 1 Inverted | Dark Bluish Gray |   | |
1 X Vehicle, Steering Stand 1 x 2 with Black Steering Wheel | Blue |   | |
2 X Slope, Inverted 45 2 x 1 | Blue |   | |
2 X Rubber Belt Large (Round Cross Section) - Approx. 4 x 4 | Blue |   | |
3 X Tile, Modified 2 x 3 Pentagonal | Blue |   | |
2 X Panel 1 x 4 x 1 | Blue |   | |
2 X Brick, Modified 1 x 4 with 4 Studs on 1 Side | Blue |   | |
1 X Plate 1 x 4 | Blue |   | |
2 X Slope, Curved 4 x 1 | Blue |   | |
4 X Technic, Liftarm 1 x 5 Thick | Blue |   | |
1 X Wedge 3 x 4 x 2/3 Cutout | Blue |   | |
1 X Plate 2 x 8 | Blue |   | |
2 X Slope 30 1 x 1 x 2/3 | Blue |   | |
1 X Slope 30 1 x 1 x 2/3 | Blue |   | |
2 X Plate 1 x 1 | Blue |   | |
1 X Plate 1 x 1 | Blue |   | |
1 X Wedge 2 x 1 with Stud Notch Left | Blue |   | |
2 X Brick 1 x 1 | Blue |   | |
2 X Plate, Modified 1 x 2 with Pin Hole on Top | Blue |   | |
1 X Wedge 2 x 1 with Stud Notch Right | Blue |   | |
2 X Slope 45 2 x 1 with Cutout without Stud | Blue |   | |
1 X Plate, Modified 1 x 2 with Bar Handle on Side with Closed Ends | Blue |   | |
1 X Plate 2 x 2 | Blue |   | |
1 X Arm Mechanical, Exo-Force / Bionicle, Thick Support | Flat Silver |   | |
2 X Vehicle, Air Scoop Engine Top 2 x 2 | Flat Silver |   | |
4 X Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim | Flat Silver |   | |
6 X Cone 1 x 1 with Top Groove | Flat Silver |   | |
2 X Minifigure, Utensil Ingot / Bar | Flat Silver |   | |
4 X Technic, Bush 1/2 Smooth | Light Bluish Gray |   | |
1 X Technic, Bush 1/2 Smooth | Light Bluish Gray |   | |
1 X Arm Skeleton, Bent with Clips at 90 degrees (Vertical Grip) | Light Bluish Gray |   | |
2 X Bracket 1 x 1 - 1 x 1 | Light Bluish Gray |   | |
2 X Plate, Round 1 x 1 with Bar Handle | Trans-Clear |   | |
1 X Plate, Round 1 x 1 with Bar Handle | Trans-Clear |   | |
2 X Plate 1 x 1 | Trans-Red |   | |
1 X Plate 1 x 1 | Trans-Red |   | |
1 X Minifigure, Utensil Syringe with 2 Hollows | Lime |   | |
1 X Minifigure, Utensil Syringe with 2 Hollows | Lime |   | |
2 X Slope 30 1 x 1 x 2/3 | Trans-Orange |   | |
1 X Slope 30 1 x 1 x 2/3 | Trans-Orange |   | |
1 X Plate, Round Corner 4 x 4 | Dark Tan |   | |
4 X Technic, Axle 5 with Stop | Reddish Brown |   | |
1 X Human Tool, Brick and Axle Separator | Orange |   | |
1 X Bar Holder with Clip | Black |   | |
1 X Slope, Inverted 33 3 x 2 with Connections between Studs | Black |   | |
2 X Slope, Inverted 33 3 x 1 | Black |   | |
2 X Plate, Modified 3 x 2 with Hole | Black |   | |
2 X Plate, Modified 1 x 2 with Angled Bar Handles on Side | Black |   | |
6 X Barb / Claw / Horn - Large with Clip | Black |   | |
4 X Technic, Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | Black |   | |
1 X Barb / Claw / Horn - Large | Black |   | |
1 X Barb / Claw / Horn - Large | Black |   | |
9 X Slope, Curved 2 x 2 Inverted | Black |   | |
6 X Tile 2 x 2 Corner | Black |   | |
4 X Slope, Curved 2 x 2 Lip | Black |   | |
2 X Plate, Modified 2 x 2 with Tow Ball and Hole | Black |   | |
9 X Slope, Curved 2 x 2 | Black |   | |
16 X Tile, Round 1 x 1 Quarter | Black |   | |
1 X Tile, Round 1 x 1 Quarter | Black |   | |
2 X Bar Holder with Handle | Black |   | |
1 X Cone 1 x 1 with Top Groove | Black |   | |
1 X Technic, Ball Joint with Through Axle Hole | Black |   | |
1 X Technic, Ball Joint with Through Axle Hole | Black |   | |
2 X Brick, Modified 1 x 1 x 1 2/3 with Studs on 1 Side | Black |   | |
2 X Minifigure, Neck Bracket with Back Stud - Thick Back Wall | Black |   | |
1 X Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite | Black |   | |
3 X Barb / Claw / Horn - Small | Black |   | |
1 X Barb / Claw / Horn - Small | Black |   | |
3 X Wedge, Plate 2 x 2 Left | Black |   | |
3 X Wedge, Plate 2 x 2 Right | Black |   | |
3 X Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) | Black |   | |
1 X Bar 1L with 1 x 1 Round Plate with Hollow Stud | Black |   | |
1 X Bar 1L with 1 x 1 Round Plate with Hollow Stud | Black |   | |
8 X Wedge 2 x 1 with Stud Notch Right | Black |   | |
5 X Slope 30 1 x 1 x 2/3 | Black |   | |
1 X Slope 30 1 x 1 x 2/3 | Black |   | |
8 X Wedge 2 x 1 with Stud Notch Left | Black |   | |
6 X Arm Skeleton, Bent with Clips (Horizontal Grip) | Black |   | |
1 X Arm Skeleton, Bent with Clips (Horizontal Grip) | Black |   | |
2 X Slope 45 2 x 1 Triple with Bottom Stud Holder | Black |   | |
4 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Black |   | |
2 X Tile, Round 2 x 2 with Bottom Stud Holder | Black |   | |
2 X Dish 2 x 2 Inverted (Radar) | Black |   | |
1 X Tile 1 x 2 with Groove | Black |   | |
3 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Black |   | |
1 X Technic, Axle Connector Hub with Two Bar Holders (Lightsaber Hilt) | Black |   | |
10 X Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots | Black |   | |
1 X Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots | Black |   | |
2 X Technic, Pin Connector 3L with 2 Pins and Center Hole | Black |   | |
1 X Plate, Modified 2 x 2 with Pin Holes | Black |   | |
1 X Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper) | Black |   | |
2 X Elephant Tail / Trunk | Black |   | |
4 X Plate, Modified 1 x 2 with Bar Handle on Side with Free Ends | Black |   | |
2 X Plate, Modified 1 x 2 with Bar Handle on Side with Closed Ends | Black |   | |
2 X Brick 1 x 2 | Black |   | |
1 X Slope, Curved 1 x 2 x 2/3 Wing End | Black |   | |
6 X Plate, Modified 1 x 2 with Clip on Top | Black |   | |
2 X Slope 45 2 x 1 with Cutout without Stud | Black |   | |
1 X Slope, Curved 2 x 1 Inverted | Black |   | |
2 X Bracket 1 x 2 - 1 x 2 | Black |   | |
10 X Bracket 1 x 2 - 1 x 2 Inverted | Black |   | |
6 X Bracket 1 x 2 - 2 x 2 Inverted | Black |   | |
1 X Plate 2 x 3 | Black |   | |
2 X Brick 2 x 3 | Black |   | |
2 X Technic, Brick 1 x 4 with Holes | Black |   | |
4 X Slope, Curved 4 x 1 Double | Black |   | |
2 X Slope, Curved 4 x 1 | Black |   | |
2 X Brick, Modified 1 x 4 with 4 Studs on 1 Side | Black |   | |
2 X Plate 1 x 4 | Black |   | |
2 X Technic, Brick Modified 2 x 2 with Pin Holes and Rotation Joint Ball Half (Vertical Side) | Black |   | |
2 X Plate, Round Corner 3 x 3 | Black |   | |
1 X Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole | Black |   | |
6 X Plate 2 x 4 | Black |   | |
3 X Bar 1 x 4 x 1 2/3 (Grille Guard / Push Bumper) | Black |   | |
1 X Slope, Curved 3 x 2 | Black |   | |
2 X Technic, Plate 2 x 4 with 3 Holes | Black |   | |
2 X Slope, Curved 4 x 2 | Black |   | |
2 X Brick 2 x 4 | Black |   | |
1 X Slope, Inverted 45 4 x 2 Double | Black |   | |
4 X Tire 43.2mm D. x 26mm Balloon Small | Black |   | |
1 X Minifigure, Weapon Pack Spider-Man Web Effects, 9 in Bag (Multipack) | Black |   | |
2 X Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip) | Black |   | |
2 X Plate, Modified 4 x 4 with Curved Cutout | Black |   | |
2 X Wedge 6 x 4 Triple Inverted Curved | Black |   | |
2 X Wedge 6 x 4 Triple Curved | Black |   | |
2 X Plate 1 x 8 | Black |   | |
1 X Windscreen 8 x 4 x 2 Curved with Locking Dual 2 Fingers | Black |   | |
1 X Sticker Sheet for Set 76151 - (68152/6302295) | (Not Applicable) |   | |
4 X Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim with Black Tire 43.2mm D. x 26mm Balloon Small (56145 / 61481) | Flat Silver |   | |
6 X Cattle Horn - Long | White |   | |
1 X Slope, Curved 3 x 1 with Grille and Headlight Pattern Model Right Side (Sticker) - Set 76151 | Red |   | |
1 X Slope, Curved 3 x 1 with Grille and Headlight Pattern Model Left Side (Sticker) - Set 76151 | Red |   | |
1 X Slope, Curved 2 x 2 with 'CODE:' and '01NK' on Blue Target Screen and Control Panel Pattern (Sticker) - 76151 | Red |   | |
4 X Slope, Curved 4 x 1 Double with Black Webbing and Blue Hull Plates Pattern (Sticker) - Set 76151 | Red |   | |
2 X Tile, Modified 2 x 3 Pentagonal with Black Webbing on Blue Background Pattern (Sticker) - Set 76151 | Blue |   | |
1 X Slope, Curved 2 x 2 with Black Spider and Webbing with Blue Hull Plates Pattern (Sticker) - Set 76151 | Red |   | |
1 X Windscreen 8 x 4 x 2 Curved with Black Flames on White Background Pattern (Sticker) - Set 76151 | Black |   | |
2 X Slope, Curved 4 x 2 with Black Flames on White Background Pattern (Sticker) - Set 76151 | Black |   | |
1 X Tile, Modified 2 x 3 Pentagonal with Black Flames on White Background Pattern (Sticker) - Set 76151 | White |   | |
1 X Wedge 4 x 4 No Studs with Black Flames on White Background Pattern (Sticker) - Set 76151 | White |   | |
2 X Wedge 4 x 3 No Studs with Black Flames on White Background Pattern (Sticker) - Set 76151 | White |   | |
1 X Slope, Curved 3 x 2 with Black Flames on White Background Pattern (Sticker) - Set 76151 | Black |   | |
Отзывы о наборе LEGO 76151