Nome | Cor | |
3 X Tile 2 x 2 with Exploriens Logo Pattern | White |   |  |
3 X Tile 1 x 2 with Danger Chevrons Red Pattern | White |   |  |
2 X Tile 1 x 2 with Controls Pattern | White |   |  |
5 X Tile 1 x 2 with Arrow Short Yellow without Black Border Pattern | Black |   |  |
1 X Tile 1 x 2 with Arrow Long Yellow without Black Border Pattern | Black |   |  |
2 X Tile 2 x 2 with Groove | White |   |  |
4 X Tile 1 x 4 | White |   |  |
2 X Tile 1 x 2 with Groove | White |   |  |
4 X Tile 1 x 1 with Groove | White |   |  |
3 X Tile 2 x 2 with Groove | Black |   |  |
3 X Tile 1 x 4 | Black |   |  |
8 X Tile 1 x 2 with Groove | Black |   |  |
1 X Technic, Plate 2 x 4 with 3 Holes | Light Gray |   |  |
2 X Technic, Brick 1 x 12 with Holes | White |   |  |
11 X Technic, Brick 1 x 1 with Hole | White |   |  |
2 X Technic, Brick 1 x 4 with Holes | Light Gray |   |  |
11 X Technic, Brick 1 x 2 with Hole | Light Gray |   |  |
2 X Technic, Axle Pin without Friction Ridges Lengthwise | Light Gray |   |  |
3 X Technic, Axle and Pin Connector Perpendicular | Light Gray |   |  |
2 X Technic, Axle 12 | Black |   |  |
2 X Technic, Axle 4 | Black |   |  |
2 X Tail 4 x 2 x 2 | White |   |  |
4 X Tail 4 x 1 x 3 | White |   |  |
1 X Tail 4 x 2 x 2 | Black |   |  |
2 X Tail 4 x 1 x 3 | Black |   |  |
1 X Support 2 x 4 x 5 Stanchion Inclined, 5mm Wide Posts | Black |   |  |
2 X Minifig, Utensil Space Scanner Tool | White |   |  |
1 X Cockpit 11 x 4 x 2 2/3 Inverted Slope | White |   |  |
2 X Support 2 x 2 x 2 Stand with Undetermined Hole Type | Black |   |  |
3 X Slope, Inverted 45 4 x 4 Double | White |   |  |
4 X Slope, Inverted 45 2 x 2 Double Convex | White |   |  |
9 X Slope, Inverted 45 2 x 2 | White |   |  |
8 X Slope, Inverted 33 3 x 2 without Connections between Studs | White |   |  |
1 X Slope, Inverted 45 2 x 1 | White |   |  |
3 X Slope 45 2 x 2 with Space Display Pattern | White |   |  |
4 X Slope 53 3 x 1 x 3 1/3 with Studs on Slope | White |   |  |
6 X Slope 45 2 x 2 | White |   |  |
10 X Slope 45 2 x 1 | White |   |  |
8 X Slope 33 3 x 1 | White |   |  |
1 X Slope 45 2 x 1 | Black |   |  |
2 X Slope 33 3 x 2 | Black |   |  |
1 X Dish 4 x 4 Inverted (Radar) | Trans-Red |   |  |
1 X Dish 4 x 4 Inverted (Radar) | Trans-Dark Blue |   |  |
2 X Dish 2 x 2 Inverted (Radar) | Trans-Dark Blue |   |  |
3 X Dish 4 x 4 Inverted (Radar) | Trans-Neon Green |   |  |
17 X Dish 2 x 2 Inverted (Radar) | Trans-Neon Green |   |  |
2 X Dish 6 x 6 Inverted (Radar) Webbed - Type 2 (underside attachment positions at 90 degrees) | Black |   |  |
4 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | White |   |  |
6 X Plate, Round 1 x 1 Straight Side | Trans-Neon Green |   |  |
3 X Plate, Round 2 x 2 with Axle Hole | Black |   |  |
1 X Wedge, Plate 3 x 6 Cut Corners | White |   |  |
1 X Plate, Modified 2 x 2 with Bar Frame Octagonal | White |   |  |
2 X Plate, Modified 1 x 1 with Clip Vertical - Type 3 (thick U clip) | White |   |  |
1 X Plate, Modified 1 x 1 with Clip Light - Thick Ring | White |   |  |
2 X Plate, Modified 2 x 2 with Wheels Holder | Light Gray |   |  |
1 X Plate, Modified 1 x 2 with 1 Stud (Jumper) | Blue |   |  |
2 X Plate, Modified 1 x 4 Offset | Black |   |  |
1 X Plate, Modified 1 x 2 with Handles - Flat Ends, Low Attachment | Black |   |  |
2 X Plate 6 x 10 | White |   |  |
1 X Plate 4 x 8 | White |   |  |
1 X Plate 4 x 6 | White |   |  |
1 X Plate 4 x 12 | White |   |  |
3 X Plate 2 x 8 | White |   |  |
2 X Plate 4 x 10 | White |   |  |
8 X Plate 2 x 6 | White |   |  |
8 X Plate 2 x 4 | White |   |  |
8 X Plate 2 x 3 | White |   |  |
2 X Plate 2 x 2 Corner | White |   |  |
5 X Plate 2 x 2 | White |   |  |
1 X Plate 2 x 12 | White |   |  |
6 X Plate 2 x 10 | White |   |  |
1 X Plate 1 x 8 | White |   |  |
3 X Plate 1 x 6 | White |   |  |
4 X Plate 1 x 4 | White |   |  |
16 X Plate 1 x 2 | White |   |  |
2 X Plate 1 x 1 | White |   |  |
2 X Plate 2 x 2 | Red |   |  |
6 X Plate 1 x 2 | Trans-Neon Green |   |  |
1 X Plate 2 x 8 | Light Gray |   |  |
4 X Plate 2 x 2 Corner | Light Gray |   |  |
1 X Plate 4 x 6 | Black |   |  |
2 X Plate 4 x 4 | Black |   |  |
1 X Plate 2 x 8 | Black |   |  |
4 X Plate 2 x 6 | Black |   |  |
7 X Plate 2 x 4 | Black |   |  |
8 X Plate 2 x 3 | Black |   |  |
4 X Plate 2 x 2 Corner | Black |   |  |
17 X Plate 2 x 2 | Black |   |  |
1 X Plate 2 x 16 | Black |   |  |
2 X Plate 2 x 12 | Black |   |  |
5 X Plate 2 x 10 | Black |   |  |
9 X Plate 1 x 6 | Black |   |  |
4 X Plate 1 x 8 | Black |   |  |
4 X Plate 1 x 4 | Black |   |  |
2 X Plate 1 x 3 | Black |   |  |
1 X Plate 1 x 10 | Black |   |  |
17 X Plate 1 x 2 | Black |   |  |
9 X Plate 1 x 1 | Black |   |  |
2 X Engine, Strakes, 2 x 2 Thin Top Plate | White |   |  |
4 X Panel 3 x 5 Solar/Clip-On/Deltoid | White |   |  |
2 X Magnet Holder 2 x 3 | White |   |  |
1 X Minifig, Utensil Loudhailer / Megaphone / SW Blaster | White |   |  |
2 X Magnet Cylindrical | Black |   |  |
4 X Hinge Bar with 3 Fingers and End Stud (Control Lever) | Black |   |  |
16 X Hinge Plate 1 x 2 with 2 Fingers | White |   |  |
4 X Hinge Plate 1 x 6 with 2 and 3 Fingers On Ends | Black |   |  |
4 X Hinge Plate 1 x 2 with 3 Fingers On Side | Black |   |  |
18 X Hinge Plate 1 x 2 with 3 Fingers | Black |   |  |
1 X Hinge Tile 1 x 4 | White |   |  |
12 X Hinge Tile 1 x 2 1/2 with 2 Fingers on Top | White |   |  |
4 X Hinge Vehicle Roof Holder 1 x 4 | White |   |  |
5 X Hinge Brick 1 x 2 Base | White |   |  |
2 X Hinge Bar 2.5L with 2 and 3 Fingers on Ends (Pantograph Shoe Holder) | Black |   |  |
5 X Hinge Brick 1 x 2 Top Plate Thin | Black |   |  |
2 X Cylinder Half 2 x 4 x 4 | Trans-Dark Blue |   |  |
5 X Cone 4 x 4 x 2 with Axle Hole | White |   |  |
4 X Cone 1 x 1 without Top Groove | Trans-Neon Green |   |  |
2 X Brick, Round 1 x 1 Open Stud | Trans-Dark Blue |   |  |
3 X Brick, Round 2 x 2 with Axle Hole | Trans-Neon Green |   |  |
1 X Brick, Modified 2 x 4 with Pins | White |   |  |
1 X Brick, Modified 2 x 2 with Pins and Axle Hole | White |   |  |
7 X Brick, Modified 1 x 2 with Pin | White |   |  |
4 X Brick, Modified 1 x 2 x 2/3 with Studs on Sides | Black |   |  |
4 X Brick 2 x 4 | White |   |  |
7 X Brick 2 x 2 | White |   |  |
3 X Brick 2 x 2 Corner | White |   |  |
2 X Brick 1 x 6 | White |   |  |
2 X Brick 2 x 10 | White |   |  |
12 X Brick 1 x 2 | White |   |  |
8 X Brick 1 x 3 | White |   |  |
2 X Brick 1 x 4 | Black |   |  |
3 X Brick 2 x 4 | Black |   |  |
14 X Brick 1 x 2 | Black |   |  |
4 X Antenna Whip 8H | Trans-Neon Green |   |  |
2 X Bracket 2 x 2 - 2 x 2 with 2 Holes | White |   |  |
2 X Tile, Modified 1 x 2 with Handle | Black |   |  |
1 X Tile, Modified 4 x 4 with Studs on Edge | Black |   |  |
2 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | White |   |  |
2 X Tile, Round 2 x 2 | Black |   |  |
1 X Turntable 2 x 2 Plate, Complete Assembly with Light Gray Top | White |   |  |
1 X Turntable 4 x 4 Square Base with Top, Complete Assembly | White |   |  |
2 X Wheel Hard Plastic Small (22mm D. x 24mm) | Black |   |  |
4 X Tire 21mm D. x 9mm Offset Tread Medium | Black |   |  |
1 X Wedge, Plate 3 x 4 without Stud Notches | Black |   |  |
4 X Wedge 4 x 4 Triple without Stud Notches | White |   |  |
1 X Wedge 3 x 2 Left | White |   |  |
1 X Wedge 3 x 2 Right | White |   |  |
4 X Wheel 8mm D. x 6mm | White |   |  |
1 X Windscreen 10 x 4 x 2 1/3 Canopy | Trans-Dark Blue |   |  |
1 X Windscreen 4 x 4 x 4 1/3 Helicopter | Trans-Dark Blue |   |  |
3 X Windscreen 6 x 4 x 2 Canopy | Trans-Dark Blue |   |  |
1 X Wedge, Plate 8 x 4 Wing Left | Black |   |  |
1 X Wedge, Plate 8 x 4 Wing Right | Black |   |  |
4 X Wing Plate Bi-level 12 x 9 x 2 1/3 | White |   |  |
1 X Wedge, Plate 8 x 4 Wing Left | White |   |  |
1 X Wedge, Plate 8 x 4 Wing Right | White |   |  |
5 X Wedge, Plate 8 x 6 x 2/3 with Grille | White |   |  |
1 X Sticker for Set 6982 - Sheet 1, Alien Code (170910) | (Not Applicable) |   |  |
3 X Technic, Pin without Friction Ridges Lengthwise | Light Gray |   |  |
1 X Sticker for Set 6982 - Sheet 3, Holographic Stars Pair (170900 Pair) | (Not Applicable) |   |  |
1 X Lever Small Base with Black Lever | White |   |  |
11 X Hinge Plate 1 x 4 Swivel Top / Base Complete Assembly | White |   |  |
3 X Hinge Plate 1 x 4 Swivel Top / Base Complete Assembly | Black |   |  |
4 X Slope, Inverted 33 3 x 1 | White |   |  |
1 X Sticker for Set 6982 - Sheet 2, Holographic Display (170889) | (Not Applicable) |   |  |
1 X Panel 1 x 2 x 3 - Solid Studs | White |   |  |
1 X Panel 1 x 2 x 2 - Solid Studs | White |   |  |
2 X Sticker for Set 6982 - Sheet 4, Reflective Trapezoid Pair (170909) | (Not Applicable) |   |  |
4 X Panel 3 x 5 Solar/Clip-On/Deltoid with Reflective Trapezoid Pattern (Sticker) | White |   |  |
1 X Tile 2 x 2 with Alien Egg Pattern (Magnetic Sticker) - Exploriens Sets | Black |   |  |
1 X Tile 2 x 2 with Dinosaur Skeleton and Bone Pattern (Magnetic Sticker) - Exploriens Sets | Black |   |  |
2 X Tile, Round 2 x 2 with Holographic Stars Pattern (Sticker) | Black |   |  |
1 X Tile, Modified 4 x 4 with Studs on Edge with Exploriens Monitor Pattern (Sticker) | Black |   |  |
4 X Wheel 8mm D. x 6mm with Black Tire Offset Tread Medium (4624 / 4084) | White |   |  |
3 X Cone 2 x 2 x 2 - Completely Open Stud | White |   |  |
Отзывы о наборе LEGO 6982