Nome | Cor | |
1 X Wedge, Plate 2 x 2 Right | White |   |  |
5 X Brick, Modified 1 x 2 x 1 2/3 with Studs on Side | White |   |  |
2 X Plate 2 x 6 | White |   |  |
1 X Wedge, Plate 2 x 2 Left | White |   |  |
1 X Plate 6 x 10 | White |   |  |
2 X Tile, Modified 2 x 2 Triangular | White |   |  |
1 X Slope, Curved 3 x 2 | White |   |  |
2 X Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) | White |   |  |
1 X Wedge, Plate 3 x 2 Right | White |   |  |
9 X Plate 1 x 2 | White |   |  |
4 X Bracket 1 x 1 - 1 x 1 Inverted | White |   |  |
2 X Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud | White |   |  |
1 X Wedge, Plate 3 x 2 Left | White |   |  |
2 X Plate 2 x 12 | White |   |  |
3 X Plate 2 x 3 | White |   |  |
4 X Plate 4 x 4 | White |   |  |
4 X Bracket 1 x 2 - 1 x 2 Inverted | White |   |  |
2 X Slope, Curved 2 x 2 | White |   |  |
2 X Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round | White |   |  |
2 X Bracket 1 x 2 - 2 x 2 | White |   |  |
1 X Minifigure, Utensil Ingot / Bar | White |   |  |
4 X Slope, Curved 2 x 1 | Red |   |  |
1 X Plate 2 x 3 | Red |   |  |
2 X Slope 18 2 x 1 x 2/3 with 4 Slots | Red |   |  |
1 X Tile 1 x 1 with Groove | Red |   |  |
2 X Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom | Red |   |  |
2 X Plate 2 x 2 Corner | Red |   |  |
5 X Plate 1 x 2 | Red |   |  |
1 X Plate 2 x 3 | Blue |   |  |
1 X Tile, Modified 1 x 2 with Bar Handle | Blue |   |  |
2 X Tile, Round 1 x 1 Quarter | Blue |   |  |
5 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Blue |   |  |
2 X Slope 18 2 x 1 x 2/3 with 4 Slots | Blue |   |  |
2 X Slope, Curved 2 x 1 | Blue |   |  |
2 X Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom | Blue |   |  |
1 X Tile, Modified 1 x 2 with Bar Handle | Yellow |   |  |
2 X Tile, Round 1 x 1 Quarter | Yellow |   |  |
5 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Yellow |   |  |
7 X Plate, Modified 2 x 2 with Wheels Holder Wide and Hole | Black |   |  |
2 X Tile, Modified 2 x 2 Triangular | Black |   |  |
1 X Bracket 5 x 2 x 1 1/3 with 2 Holes | Black |   |  |
6 X Plate, Round 1 x 1 | Black |   |  |
4 X Tire 14mm D. x 6mm Solid Smooth | Black |   |  |
2 X Plate 1 x 3 | Black |   |  |
4 X Brick, Modified 1 x 2 with Studs on 1 Side | Black |   |  |
6 X Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) | Black |   |  |
1 X Tile, Round 2 x 2 with Hole | Black |   |  |
8 X Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side | Black |   |  |
6 X Tire 21 x 9.9 | Black |   |  |
1 X Plate 2 x 10 | Black |   |  |
2 X Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper) | Black |   |  |
8 X Tire 14mm D. x 9mm Smooth Small Wide Slick | Black |   |  |
2 X Brick, Modified 1 x 1 x 1 2/3 with Studs on 1 Side | Black |   |  |
2 X Slope 30 1 x 2 x 2/3 | Black |   |  |
2 X Slope, Curved 2 x 2 | Black |   |  |
3 X Brick 2 x 4 | Green |   |  |
2 X Bracket 1 x 2 - 2 x 2 | Green |   |  |
1 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Green |   |  |
1 X Wedge, Plate 6 x 3 Right | Green |   |  |
2 X Slope, Curved 2 x 2 | Green |   |  |
2 X Plate, Round 2 x 2 with Axle Hole | Green |   |  |
6 X Plate 1 x 2 | Green |   |  |
8 X Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud | Green |   |  |
6 X Tile 1 x 3 | Green |   |  |
2 X Slope, Curved 1 x 2 x 1 | Green |   |  |
1 X Wedge, Plate 6 x 3 Left | Green |   |  |
2 X Plate, Modified 1 x 2 with Racers Car Grille | Green |   |  |
7 X Plate 1 x 1 | Green |   |  |
2 X Slope, Curved 2 x 1 | Green |   |  |
2 X Slope, Curved 4 x 1 | Green |   |  |
4 X Plate, Modified 1 x 2 with Wheel Holder | Black |   |  |
4 X Tile, Round 1 x 1 | Trans-Clear |   |  |
3 X Plate 1 x 2 | Trans-Red |   |  |
2 X Brick, Modified 1 x 2 with Log Profile | Dark Turquoise |   |  |
2 X Tile, Round 1 x 1 | Dark Blue |   |  |
2 X Tile, Round 1 x 1 | Dark Red |   |  |
2 X Plate 1 x 1 | Trans-Orange |   |  |
2 X Bracket 1 x 2 - 2 x 2 Inverted | Light Bluish Gray |   |  |
4 X Slope 30 1 x 2 x 2/3 | Light Bluish Gray |   |  |
4 X Tile 2 x 4 | Light Bluish Gray |   |  |
2 X Minifigure, Utensil Telescope | Light Bluish Gray |   |  |
2 X Cone 1 x 1 with Top Groove | Light Bluish Gray |   |  |
4 X Slope, Curved 2 x 2 | Light Bluish Gray |   |  |
4 X Plate, Round 2 x 2 with Axle Hole | Light Bluish Gray |   |  |
1 X Hinge Plate 1 x 2 Locking with 2 Fingers on Side and 7 Teeth | Light Bluish Gray |   |  |
8 X Wheel 8mm D. x 9mm for Slicks, Hole Notched for Wheels Holder Pin, Reinforced Back | Light Bluish Gray |   |  |
8 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Light Bluish Gray |   |  |
6 X Wheel 14mm D. x 9.9mm with Center Groove, Fake Bolts and 6 Double Spokes | Light Bluish Gray |   |  |
2 X Panel 1 x 4 x 1 | Light Bluish Gray |   |  |
1 X Hinge Plate 2 x 2 Locking with 1 Finger on Top | Light Bluish Gray |   |  |
2 X Bar 1L with 1 x 1 Round Plate with Hollow Stud | Light Bluish Gray |   |  |
4 X Brick 1 x 1 | Light Bluish Gray |   |  |
4 X Plate 1 x 6 | Light Bluish Gray |   |  |
2 X Technic, Plate 2 x 8 with 7 Holes | Dark Bluish Gray |   |  |
2 X Plate, Modified 1 x 2 with Bar Handle on Side with Closed Ends | Dark Bluish Gray |   |  |
5 X Plate 1 x 4 | Dark Bluish Gray |   |  |
2 X Plate, Modified 1 x 2 with Clip on End (Horizontal Grip) | Dark Bluish Gray |   |  |
2 X Slope, Curved 2 x 2 x 1 Double with 2 Studs | Dark Bluish Gray |   |  |
1 X Slope, Curved 2 x 2 x 2/3 with Two Studs and Curved Sides | Dark Bluish Gray |   |  |
2 X Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom | Dark Bluish Gray |   |  |
2 X Bracket 1 x 2 - 1 x 2 | Dark Bluish Gray |   |  |
4 X Plate 2 x 2 Corner | Dark Bluish Gray |   |  |
4 X Bar 1 x 4 x 3 Grille with End Protrusions | Dark Bluish Gray |   |  |
8 X Brick, Modified 1 x 1 with Headlight | Dark Bluish Gray |   |  |
4 X Wheel 11mm D. x 6mm with Smooth Hubcap | Flat Silver |   |  |
1 X Tile 1 x 1 with Groove | Medium Azure |   |  |
2 X Plate 2 x 2 Corner | Medium Azure |   |  |
4 X Plate 1 x 2 | Medium Azure |   |  |
2 X Slope, Curved 2 x 1 | Medium Azure |   |  |
1 X Technic, Axle 1L with Pin without Friction Ridges Lengthwise | Tan |   |  |
1 X Tile, Round 1 x 1 | Dark Blue |   |  |
1 X Plate 1 x 1 | Green |   |  |
1 X Tile, Round 1 x 1 | Trans-Clear |   |  |
1 X Plate, Round 1 x 1 | Black |   |  |
1 X Tile, Round 1 x 1 Quarter | Yellow |   |  |
1 X Tile, Round 1 x 1 | Dark Red |   |  |
1 X Plate 1 x 1 | Trans-Orange |   |  |
1 X Tile, Round 1 x 1 Quarter | Blue |   |  |
1 X Bar 1L with 1 x 1 Round Plate with Hollow Stud | Light Bluish Gray |   |  |
1 X Tile 1 x 1 with Groove | Red |   |  |
1 X Tire 14mm D. x 6mm Solid Smooth | Black |   |  |
1 X Tile 1 x 1 with Groove | Medium Azure |   |  |
4 X Wheel 11mm D. x 6mm with Smooth Hubcap with Black Tire 14mm D. x 6mm Solid Smooth (93594 / 50945) | Flat Silver |   |  |
8 X Wheel 8mm D. x 9mm, Hole Notched for Wheels Holder Pin, Reinforced Back with Black Tire 14mm D. x 9mm Smooth Small Wide Slick (74967 / 30028) | Light Bluish Gray |   |  |
6 X Wheel 14mm D. x 9.9mm with Center Groove, Fake Bolts and 6 Spokes with Black Tire 21 X 9.9 (11208 / 11209) | Light Bluish Gray |   |  |
Отзывы о наборе LEGO 31113