Name | Color | |
4 X Bracket 1 x 2 - 2 x 2 | Dark Azure |   | |
2 X Plate 1 x 4 | Dark Azure |   | |
2 X Plate 2 x 6 | Dark Azure |   | |
2 X Wedge, Plate 4 x 6 Cut Corners | Dark Azure |   | |
1 X Slope 45 2 x 2 | Dark Bluish Gray |   | |
1 X Plate 1 x 6 | Dark Bluish Gray |   | |
1 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Dark Bluish Gray |   | |
2 X Bracket 1 x 2 - 2 x 2 | Dark Bluish Gray |   | |
2 X Technic, Brick 1 x 4 with Holes | Dark Bluish Gray |   | |
2 X Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) | Dark Bluish Gray |   | |
3 X Tile 2 x 4 | Dark Bluish Gray |   | |
1 X Plate 6 x 10 | Dark Bluish Gray |   | |
2 X Plate 3 x 3 | Dark Bluish Gray |   | |
4 X Plate 2 x 4 | Dark Bluish Gray |   | |
1 X Brick, Arch 1 x 6 Raised Arch | Dark Bluish Gray |   | |
6 X Tile 1 x 8 | Dark Bluish Gray |   | |
5 X Plate 2 x 6 | Dark Bluish Gray |   | |
1 X Wedge, Plate 8 x 3 Left | Dark Bluish Gray |   | |
8 X Bracket 1 x 2 - 2 x 4 | Dark Bluish Gray |   | |
1 X Plate 2 x 12 | Dark Bluish Gray |   | |
7 X Wedge, Plate 3 x 4 with Stud Notches | Dark Bluish Gray |   | |
1 X Plate, Round 2 x 2 with Axle Hole | Dark Bluish Gray |   | |
6 X Bracket 1 x 2 - 1 x 2 Inverted | Dark Bluish Gray |   | |
3 X Slope, Curved 2 x 2 No Studs | Dark Bluish Gray |   | |
1 X Wedge, Plate 8 x 3 Right | Dark Bluish Gray |   | |
1 X Fence 1 x 4 x 1 | Dark Bluish Gray |   | |
2 X Tile, Modified 2 x 2 with Pin | Dark Bluish Gray |   | |
2 X Minifigure, Utensil Ski without Hinge | Dark Bluish Gray |   | |
2 X Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath | Dark Bluish Gray |   | |
2 X Technic, Brick 1 x 12 with Holes | Dark Bluish Gray |   | |
2 X Plate 1 x 4 | Dark Bluish Gray |   | |
6 X Helicopter Landing Ski 1 x 6 with Pin Hole (15625) | Dark Bluish Gray |   | |
1 X Plate 2 x 3 | Dark Bluish Gray |   | |
1 X Minifigure, Utensil Tool Circular Blade Saw | Dark Bluish Gray |   | |
2 X Bracket 1 x 2 - 2 x 2 | Light Bluish Gray |   | |
1 X Plate 2 x 3 | Light Bluish Gray |   | |
1 X Slope 45 2 x 1 | Light Bluish Gray |   | |
1 X Slope, Curved 2 x 2 Inverted | Light Bluish Gray |   | |
1 X Wedge, Plate 12 x 6 Right | Light Bluish Gray |   | |
1 X Antenna Whip 8H | Light Bluish Gray |   | |
1 X Minifigure, Weapon Lightsaber Hilt Straight | Light Bluish Gray |   | |
1 X Plate, Modified 2 x 2 with Wheels Holder | Light Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Ladder | Light Bluish Gray |   | |
2 X Plate 2 x 6 | Light Bluish Gray |   | |
1 X Hinge Plate 1 x 2 Locking with 2 Fingers on Side | Light Bluish Gray |   | |
2 X Tile, Modified 3 x 4 with 4 Studs in Center | Light Bluish Gray |   | |
2 X Tile, Modified 1 x 2 with Handle | Light Bluish Gray |   | |
2 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Light Bluish Gray |   | |
2 X Plate, Modified 1 x 4 with Arm Down | Light Bluish Gray |   | |
2 X Bracket 1 x 2 - 2 x 2 Inverted | Light Bluish Gray |   | |
1 X Technic, Plate 2 x 4 with 3 Holes | Light Bluish Gray |   | |
2 X Plate 2 x 14 | Light Bluish Gray |   | |
2 X Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends | Light Bluish Gray |   | |
4 X Hinge Brick 1 x 4 Locking with 1 Finger Vertical End and 2 Fingers Vertical End | Light Bluish Gray |   | |
2 X Panel 1 x 4 x 3 with Side Supports - Hollow Studs | Light Bluish Gray |   | |
10 X Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring | Light Bluish Gray |   | |
2 X Slope, Inverted 45 2 x 2 | Light Bluish Gray |   | |
2 X Brick, Modified 1 x 1 with Headlight | Light Bluish Gray |   | |
1 X Plate 2 x 2 | Light Bluish Gray |   | |
2 X Tile, Round 1 x 1 | Light Bluish Gray |   | |
4 X Plate, Modified 1 x 2 with Clip on Top | Light Bluish Gray |   | |
2 X Panel 1 x 2 x 3 with Side Supports - Hollow Studs | Light Bluish Gray |   | |
1 X Wedge, Plate 12 x 6 Left | Light Bluish Gray |   | |
2 X Container, Crate with Handholds | Light Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Handle on Side - Closed Ends | Light Bluish Gray |   | |
2 X Hinge Plate 1 x 2 Locking with 1 Finger On Top | Light Bluish Gray |   | |
3 X Plate 4 x 8 | Light Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Clip Horizontal on End | Light Bluish Gray |   | |
2 X Wedge, Plate 4 x 9 with Stud Notches | Light Bluish Gray |   | |
1 X Plate, Modified 1 x 2 with Handles on Ends | Light Bluish Gray |   | |
1 X Minifigure, Utensil Handlebars | Light Bluish Gray |   | |
2 X Tile 2 x 2 with Groove | Light Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Light Bluish Gray |   | |
2 X Slope 45 2 x 1 with 2/3 Cutout | Light Bluish Gray |   | |
2 X Minifigure, Footgear Snowshoe - Short Front End | Bright Light Orange |   | |
1 X Brick 2 x 2 | Dark Blue |   | |
1 X Aircraft Fuselage Curved Forward 6 x 8 Bottom | Dark Blue |   | |
4 X Slope 30 1 x 1 x 2/3 | Dark Blue |   | |
2 X Tile 1 x 6 | Dark Blue |   | |
3 X Slope, Curved 2 x 2 No Studs | Dark Blue |   | |
1 X Plate 2 x 6 | Dark Blue |   | |
5 X Plate 1 x 6 | Dark Blue |   | |
1 X Slope, Curved 2 x 4 x 2/3 No Studs with Bottom Tubes | Dark Blue |   | |
1 X Tile, Modified 2 x 2 with Studs on Edge | Dark Blue |   | |
2 X Wedge, Plate 3 x 6 Cut Corners | Dark Blue |   | |
2 X Slope, Curved 4 x 2 No Studs | Dark Blue |   | |
1 X Plate 6 x 6 | Dark Blue |   | |
1 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Dark Blue |   | |
3 X Tile 1 x 2 with Groove | Dark Blue |   | |
2 X Slope, Curved 4 x 1 Double No Studs | Dark Blue |   | |
1 X Slope 18 4 x 2 | Dark Blue |   | |
2 X Tile 2 x 4 | Dark Blue |   | |
2 X Tile, Modified 2 x 3 with 2 Clips (thick open O clips) | Dark Blue |   | |
1 X Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes | Dark Blue |   | |
2 X Slope 33 3 x 1 | Dark Blue |   | |
1 X Minifigure, Visor Standard | Trans-Black |   | |
2 X Vehicle, Mudguard 2 x 4 with Flared Wings | Orange |   | |
6 X Brick 2 x 2 | Orange |   | |
1 X Wedge 4 x 4 x 2/3 Triple Curved | Orange |   | |
2 X Wedge, Plate 4 x 4 Cut Corner | Orange |   | |
4 X Tile 1 x 3 | Orange |   | |
1 X Human Tool, Brick and Axle Separator | Orange |   | |
3 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Orange |   | |
6 X Plate 2 x 6 | Orange |   | |
1 X Wedge, Plate 6 x 3 Right | Orange |   | |
2 X Wedge 4 x 2 Left | Orange |   | |
4 X Tile 1 x 1 with Groove (3070) | Orange |   | |
1 X Aircraft Fuselage Curved Forward 6 x 8 Top | Orange |   | |
2 X Tile, Round 2 x 2 with Bottom Stud Holder | Orange |   | |
1 X Wedge, Plate 6 x 3 Left | Orange |   | |
1 X Hinge Plate 2 x 2 Locking with 1 Finger on Top | Orange |   | |
3 X Slope, Curved 4 x 2 No Studs | Orange |   | |
4 X Bracket 1 x 2 - 1 x 2 | Orange |   | |
2 X Window 1 x 4 x 2 Plane, Single Hole Top and Bottom for Glass | Orange |   | |
2 X Aircraft Fuselage Curved Aft Section 6 x 10 Top | Orange |   | |
1 X Slope 45 6 x 4 Double | Orange |   | |
2 X Wedge 4 x 2 Right | Orange |   | |
4 X Slope, Curved 2 x 1 No Studs | Orange |   | |
1 X Brick 2 x 4 | Orange |   | |
2 X Tile 2 x 2 with Groove | Orange |   | |
1 X Slope, Curved 2 x 2 No Studs | Orange |   | |
4 X Plate 2 x 3 | Orange |   | |
2 X Plate 2 x 2 | Orange |   | |
4 X Slope 45 2 x 1 with Cutout without Stud | Orange |   | |
2 X Wedge 4 x 4 Triple with Stud Notches | Orange |   | |
21 X Plate 1 x 2 | Orange |   | |
2 X Brick, Modified Facet 2 x 2 | Orange |   | |
3 X Brick 1 x 2 | Orange |   | |
2 X Brick 1 x 3 | Orange |   | |
1 X Slope 30 1 x 2 x 2/3 | Orange |   | |
4 X Slope 30 1 x 1 x 2/3 | Orange |   | |
6 X Tile 2 x 4 | Orange |   | |
1 X Tile, Round 1 x 1 | Trans-Green |   | |
3 X Tile, Round 1 x 1 | Trans-Light Blue |   | |
1 X Panel 1 x 4 x 3 with Side Supports - Hollow Studs | Trans-Light Blue |   | |
7 X Brick, Round 1 x 1 Open Stud | Trans-Light Blue |   | |
7 X Slope 30 1 x 1 x 2/3 | Trans-Light Blue |   | |
3 X Windscreen 3 x 4 x 3 | Trans-Light Blue |   | |
2 X Tile 1 x 2 with Groove | Trans-Light Blue |   | |
6 X Slope 45 2 x 2 | Trans-Light Blue |   | |
1 X Tile 1 x 2 with Groove | Trans-Red |   | |
1 X Tile, Round 1 x 1 | Trans-Red |   | |
2 X Plate 1 x 1 | Trans-Red |   | |
2 X Plate 1 x 2 | Trans-Red |   | |
2 X Slope 30 1 x 1 x 2/3 | Trans-Clear |   | |
12 X Tile, Round 1 x 1 | Trans-Clear |   | |
2 X Plate 1 x 1 | Trans-Clear |   | |
2 X Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends | Black |   | |
2 X Plate, Modified 1 x 1 Rounded with Handle | Black |   | |
1 X Bar 1 x 4 x 1 2/3 (Grille Guard / Push Bumper) | Black |   | |
1 X Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder | Black |   | |
1 X Brick, Round 4 x 4 with Hole | Black |   | |
5 X Tile, Modified 1 x 1 with Clip - Rounded Edges | Black |   | |
4 X Plate 2 x 2 | Black |   | |
1 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Black |   | |
2 X Minifigure, Weapon Lightsaber Hilt Straight | Black |   | |
1 X Turntable 4 x 4 Square Base, Locking | Black |   | |
2 X Slope, Curved 4 x 1 Inverted | Black |   | |
1 X Minifigure, Utensil Computer Laptop | Black |   | |
2 X Brick, Modified 1 x 2 with Studs on 1 Side | Black |   | |
2 X Brick 1 x 8 | Black |   | |
1 X Slope 30 1 x 2 x 2/3 | Black |   | |
6 X Technic, Brick 1 x 2 with Axle Hole | Black |   | |
3 X Bracket 1 x 2 - 1 x 2 | Black |   | |
6 X Slope 18 2 x 1 x 2/3 with 4 Slots | Black |   | |
1 X Minifigure, Utensil Radio with Detailed Grille | Black |   | |
2 X Plate, Modified 1 x 1 with Clip Horizontal (thick open O clip) | Black |   | |
4 X Plate, Modified 1 x 2 with Handle on End - Closed Ends | Black |   | |
2 X Lever Small Base with Black Lever | Yellow |   | |
6 X Plate, Round 1 x 1 Straight Side | Red |   | |
2 X Brick, Modified 1 x 1 with Stud on 1 Side | Tan |   | |
1 X Plate 2 x 4 | Tan |   | |
1 X Plate 2 x 10 | Tan |   | |
2 X Brick 1 x 16 | White |   | |
7 X Slope 30 1 x 1 x 2/3 | White |   | |
1 X Slope, Curved 5 x 8 x 2/3 | White |   | |
1 X Slope 75 2 x 1 x 3 - Hollow Stud | White |   | |
1 X Tile 2 x 2 with Groove | White |   | |
2 X Slope 33 3 x 2 | White |   | |
1 X Slope 45 2 x 2 with Aircraft Multiple Flight Controls Pattern | White |   | |
1 X Brick, Modified Facet 4 x 4 | White |   | |
5 X Brick 1 x 2 | White |   | |
2 X Wedge, Plate 4 x 4 Cut Corner | White |   | |
5 X Slope 65 2 x 2 x 2 with Bottom Tube | White |   | |
4 X Tile 2 x 4 | White |   | |
1 X Slope 45 2 x 2 with Radar Screen Pattern | White |   | |
1 X Plate, Modified 1 x 4 with 2 Studs without Groove | White |   | |
1 X Plate 4 x 6 | White |   | |
3 X Slope 18 4 x 1 | White |   | |
8 X Brick 2 x 4 | White |   | |
2 X Plate 4 x 4 | Black |   | |
4 X Technic, Axle Pin without Friction Ridges Lengthwise | Tan |   | |
2 X Technic, Axle 2 Notched | Red |   | |
2 X Technic, Pin 3L with Friction Ridges Lengthwise | Blue |   | |
5 X Technic, Axle Pin with Friction Ridges Lengthwise | Blue |   | |
4 X Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole | Black |   | |
92 X Technic, Link Tread | Black |   | |
2 X Technic, Axle 6 | Black |   | |
2 X Technic, Axle 10 | Black |   | |
2 X Technic, Axle Connector with Axle Hole | Black |   | |
2 X Technic, Gear 12 Tooth Double Bevel | Black |   | |
8 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black |   | |
8 X Technic, Axle 3 with Stud | Dark Tan |   | |
4 X Technic, Liftarm 3 x 5 L-Shape Thick | Dark Blue |   | |
2 X Technic, Liftarm 1 x 7 Thick | Light Bluish Gray |   | |
8 X Technic, Disk 3 x 3 | Light Bluish Gray |   | |
1 X Technic, Pin 3L with Friction Ridges Lengthwise and Center Pin Hole | Light Bluish Gray |   | |
2 X Technic, Pin 3L with Friction Ridges Lengthwise and Stop Bush | Light Bluish Gray |   | |
6 X Technic Bush | Light Bluish Gray |   | |
12 X Technic, Pin 1/2 | Light Bluish Gray |   | |
4 X Wheel 11mm D. x 8mm with Center Groove | Light Bluish Gray |   | |
1 X Technic, Pin Connector Perpendicular Double 3L | Light Bluish Gray |   | |
1 X Technic, Axle 5 | Light Bluish Gray |   | |
1 X Technic Circular Saw Blade 9 x 9 with Frictionless Axle Hole and Teeth in Alternating Directions | Dark Bluish Gray |   | |
4 X Technic, Liftarm 1 x 5 Thick | Dark Bluish Gray |   | |
4 X Technic, Axle Connector 2L (Smooth with x Hole + Orientation) | Dark Bluish Gray |   | |
2 X Technic, Liftarm 1 x 7 Bent (4 - 4) Thick | Dark Bluish Gray |   | |
4 X Technic, Axle 4 with Stop | Dark Bluish Gray |   | |
1 X Sticker for Set 60196 - (38881/6227938) | (Not Applicable) |   | |
1 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black |   | |
1 X Minifigure, Weapon Lightsaber Hilt Straight | Black |   | |
8 X Tire 23mm D. x 7mm Offset Tread - Band Around Center of Tread | Black |   | |
2 X Technic, Link Tread | Black |   | |
1 X Slope 30 1 x 1 x 2/3 | Dark Blue |   | |
1 X Technic, Pin 1/2 | Light Bluish Gray |   | |
1 X Technic Bush | Light Bluish Gray |   | |
1 X Minifigure, Weapon Lightsaber Hilt Straight | Light Bluish Gray |   | |
1 X Tile, Round 1 x 1 | Light Bluish Gray |   | |
1 X Tile 1 x 1 with Groove (3070) | Orange |   | |
1 X Slope 30 1 x 1 x 2/3 | Orange |   | |
1 X Plate, Round 1 x 1 Straight Side | Red |   | |
1 X Tile, Round 1 x 1 | Trans-Clear |   | |
1 X Tile, Round 1 x 1 | Trans-Green |   | |
1 X Tile, Round 1 x 1 | Trans-Light Blue |   | |
1 X Tile, Round 1 x 1 | Trans-Red |   | |
1 X Windscreen 2 x 4 x 2 | Trans-Light Blue |   | |
1 X Glass for Aircraft Fuselage Curved Forward 6 x 8 Top | Trans-Light Blue |   | |
4 X Glass for Window 1 x 2 x 2 Flat Front | Trans-Light Blue |   | |
1 X Cone 1 x 1 with Top Groove | Trans-Orange |   | |
2 X Bar with Light Cover / Bionicle Barraki Eye | Trans-Orange |   | |
1 X Bar with Light Cover / Bionicle Barraki Eye | Trans-Red |   | |
1 X Lever Small Base with Black Lever | Yellow |   | |
1 X Slope 30 1 x 1 x 2/3 | White |   | |
1 X Minifigure, Visor Snow Goggles | White |   | |
8 X Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring with Black Tire Offset Tread - Band Around Center of Tread (13971 / 61254) | Light Bluish Gray |   | |
1 X Cat, Large (Saber-Toothed Tiger) with Light Yellow Eyes, Long Teeth and Reddish Brown Stripes Pattern | Medium Dark Flesh |   | |
Отзывы о наборе LEGO 60196