Name | Color | |
2 X Plate, Modified 1 x 2 with Clip on Top | White |   |  |
2 X Slope, Inverted 33 3 x 1 | White |   |  |
2 X Slope, Curved 3 x 1 No Studs | White |   |  |
9 X Plate 2 x 4 | White |   |  |
2 X Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side | White |   |  |
1 X Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole | White |   |  |
2 X Brick 1 x 2 | White |   |  |
6 X Bracket 1 x 2 - 2 x 2 Inverted | Red |   |  |
2 X Plate, Modified 1 x 2 with Clip Horizontal on End | Red |   |  |
5 X Plate 1 x 2 | Blue |   |  |
4 X Plate, Modified 1 x 2 with Handle on End - Closed Ends | Yellow |   |  |
1 X Plate, Modified 3 x 2 with Hole | Yellow |   |  |
2 X Plate 1 x 6 | Yellow |   |  |
4 X Slope 45 2 x 1 with 2/3 Cutout | Black |   |  |
1 X Technic, Brick 1 x 2 with Hole | Black |   |  |
1 X Tile, Round 2 x 2 with Hole | Black |   |  |
2 X Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim | Black |   |  |
1 X Wedge, Plate 4 x 2 Right | Black |   |  |
2 X Slope, Curved 4 x 1 Double No Studs | Black |   |  |
1 X Wedge, Plate 4 x 2 Left | Black |   |  |
7 X Plate 1 x 1 | Black |   |  |
2 X Tire 49.5 x 20 | Black |   |  |
1 X Plate 2 x 6 | Black |   |  |
2 X Hinge Plate 1 x 2 Locking with 2 Fingers On End | Black |   |  |
2 X Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends | Black |   |  |
2 X Tire 23mm D. x 7mm Offset Tread - Band Around Center of Tread | Black |   |  |
2 X Slope 18 2 x 1 x 2/3 with 4 Slots | Black |   |  |
3 X Bracket 1 x 2 - 1 x 2 | Black |   |  |
1 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Black |   |  |
2 X Tile, Round 1 x 1 | Trans-Clear |   |  |
2 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Trans-Clear |   |  |
2 X Plate, Round 1 x 1 Straight Side | Trans-Red |   |  |
2 X Slope 30 1 x 2 x 2/3 | Orange |   |  |
1 X Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper) | Orange |   |  |
1 X Wedge 3 x 4 with Stud Notches | Orange |   |  |
2 X Slope, Curved 2 x 1 No Studs | Orange |   |  |
3 X Tile, Round 1 x 1 | Light Bluish Gray |   |  |
3 X Plate, Modified 1 x 2 with Pin Hole on Bottom | Light Bluish Gray |   |  |
2 X Tile, Round 2 x 2 with Bottom Stud Holder | Light Bluish Gray |   |  |
2 X Slope, Curved 4 x 1 Inverted | Light Bluish Gray |   |  |
1 X Brick 2 x 4 | Light Bluish Gray |   |  |
2 X Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring | Light Bluish Gray |   |  |
1 X Hinge Plate 2 x 4 with Pin Hole and 3 Holes - Top | Light Bluish Gray |   |  |
6 X Bracket 1 x 2 - 2 x 2 | Dark Bluish Gray |   |  |
2 X Plate 1 x 4 | Dark Bluish Gray |   |  |
2 X Technic, Plate 2 x 4 with 3 Holes | Dark Bluish Gray |   |  |
2 X Plate 2 x 6 | Dark Bluish Gray |   |  |
5 X Plate, Round 2 x 2 with Axle Hole | Dark Bluish Gray |   |  |
1 X Tile, Round 2 x 2 with Hole | Dark Bluish Gray |   |  |
2 X Brick, Round 2 x 2 x 2 Robot Body - with Bottom Axle Holder x Shape + Orientation | Dark Bluish Gray |   |  |
2 X Brick 2 x 2 Corner | Dark Bluish Gray |   |  |
2 X Brick, Round 1 x 1 Open Stud | Dark Bluish Gray |   |  |
3 X Plate 2 x 3 | Dark Bluish Gray |   |  |
1 X Technic, Brick 1 x 2 with Hole and Dual Liftarm Extensions | Dark Bluish Gray |   |  |
2 X Technic, Axle 4 with Center Stop | Tan |   |  |
2 X Technic, Axle Pin without Friction Ridges Lengthwise | Tan |   |  |
2 X Technic, Pin 3/4 | Tan |   |  |
6 X Technic, Axle Pin with Friction Ridges Lengthwise | Blue |   |  |
2 X Technic, Liftarm 1 x 4 Thin | Yellow |   |  |
12 X Technic Bush 1/2 Smooth | Yellow |   |  |
2 X Technic, Liftarm 1 x 7 Thick | Black |   |  |
2 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black |   |  |
2 X Technic, Liftarm 1 x 5 Thin with Axle Holes on Ends | Black |   |  |
2 X Technic, Axle and Pin Connector Toggle Joint Smooth | Black |   |  |
3 X Technic, Axle 5 with Stop | Reddish Brown |   |  |
2 X Technic, Pin 1/2 | Light Bluish Gray |   |  |
1 X Technic, Axle 5 | Light Bluish Gray |   |  |
1 X Technic, Axle Connector with Axle Hole | Light Bluish Gray |   |  |
1 X Technic, Axle and Pin Connector Angled #2 - 180 degrees | Light Bluish Gray |   |  |
1 X Technic, Shock Absorber 6.5L, Complete Assembly - Soft Spring | Light Bluish Gray |   |  |
4 X Technic Bush | Light Bluish Gray |   |  |
4 X Cone 2 x 2 Truncated | Light Bluish Gray |   |  |
2 X Technic, Brick 1 x 2 with Holes | Light Bluish Gray |   |  |
2 X Slope 18 2 x 1 x 2/3 with 4 Slots | Orange |   |  |
2 X Wedge, Plate 4 x 4 Cut Corner | Orange |   |  |
1 X Wedge 4 x 4 Triple with Stud Notches | Orange |   |  |
3 X Technic, Axle 3 | Yellow |   |  |
2 X Wedge 2 x 2 (Slope 45 Corner) | Black |   |  |
1 X Windscreen 6 x 4 x 1 1/3 Pointed | Trans-Black |   |  |
2 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Flat Silver |   |  |
2 X Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim with Black Tire 49.5 x 20 (56145 / 15413) | Black |   |  |
2 X Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring with Black Tire Offset Tread - Band Around Center of Tread (13971 / 61254) | Light Bluish Gray |   |  |
Отзывы о наборе LEGO 31059