Hi everyone
I'm so happy to let you know that Print then Cut will be launched the week of September 22nd, 2014!
I've been lucky enough to have been given the opportunity to beta test the new features for the last couple of months and I'd like to quickly go over them here!
(Make sure you join us on Facebook for up to date info of
when the new update will be launched!)
So, obviously the biggest new feature is the Print then Cut. So what does that actually mean?
Quite simply, you'll be able to take pretty much any image (Cricut or imported) into Design Space, print it out then have the Explore cut it!
When it's released you will be prompted to install a new Design Space plug in. You'll also need to do a firmware update on your Explore.
Once that's done you'll do a calibration of your Explore. Don't worry... it takes you through it step by step!
There are even lots of images that are "Print Ready" available. Just click Insert Images, then with All Images selected click on the Filter and check the Printables box.
Select an image, resize it then press Go and follow the instructions. It's that easy!
Keep in mind that currently Print then Cut is limited to 8.5" x 11" so you'll have to keep your image smaller than that to stay within the registration marks. You will get an error message if your image is too big.
If you don't want your image printed as one flat layer, just click on the Unflatten button
Some of the layers will be separated so you can give your project some dimension.
When you're at the Mat Preview screen you'll see a Settings button in to top right corner.
Click on that and you'll see the option to "bleed".
Bleed prints a border around your image which allows for more precise cutting.
So, what else is new in Design Space?
You'll find there are new icons in the Layers box.
Slice
A great new addition to Design Space is the Slice tool.
Remember all those times you've wanted to cut something off or out of an object? Well, now you can!
You can turn a circle into a semi-circle. Or create a frame by placing one image on top of another.
(Previously achieved by using Weld).
Using the Slice tool I was able to create this swing card.
I'll have a full tutorial soon on how to create this card!
Weld
Not a new tool, but the way Weld works has changed.
Previously if you placed one image inside another image and welded, the smaller image would be cut out of the larger image.
Now if you do the same process the smaller image is fully absorbed into the larger image.
So how do you achieve the same result as the old weld? You use the slice tool instead!
Overlapping images and welding still works in the same way though.
Flatten
Take any image and turn it into a one layered printable
image. Then cut around that image.
(It's a bit hard to see but the image on the right will print as one layer.)
Here's what the Mat Preview looks like when the above image hasn't been flattened.
All the layers are separated and cut as you're used to.
Here's what the Mat Preview looks like when the image has been flattened.You can see the registration marks on the Mat Preview.
You can see that there's two layers showing. The first layer will be printed and then the Explore will cut around it. The second layer is a cut only layer and is the shadow for this image. Cutting it is totally optional.
Don't like flat images? No problem. You can still use the Print then Cut feature to print each layer then cut it.
Instead of clicking Flatten you can go to the Layers menu and change the Cut icon to a Print Icon. You can see in the picture below I have changed the first 3 icons to Print icons so far.
When finished this is what your Mat Preview will look like. Once you press Print and Continue all three mats will be sent to your printer to be printed and you will then place them one at a time on the cutting mat.
A great feature of changing the cutting icon to a printing icon is that you can change the colours of any or all of the layers. Just click on a layer in the Layers box then select the colour you want from the Custom Color Picker.
Detach
Not a new tool, but the Detach option has been added to the Layers box so you don't have to go digging for it in the drop down menu when you right click on an object.
What else?
Well, now when you click on an object and hold an arrow key down on your keyboard the image will keep moving. No more click click click click....!
And.... for those of us that don't live in the USA, Print then Cut works perfectly with our A4 paper!
That's all for now... but stay tuned for more in depth tutorials!
Happy crafting! ♥
