Truss Designer
TM
Truss Data
Type of Truss:
Fink (4/3)
Out-to-out Span:
ft.
Top Chord Pitch:
/12
Spacing:
in. o/c
Bearing Width:
in.
Overhang:
in.
Required Truss Data
Design Assumptions:
Number of Plies:
1
PLY
Butt Cut:
0.25
in.
Bottom Chord Pitch:
0
/12
TC Bracing:
OSB
7/16 in.
BC Bracing:
10
ft. o/c
Design Loads
Top Chord Live Load:
psf
Top Chord Dead Load:
psf
Bottom Chord Live Load:
psf
Bottom Chord Dead Load:
psf
Required Design Loads
*Note: Scalable Vector Graphic output of Truss Designer is not viewable with Internet Explorer Browsers. Recommended browsers are
Google Chrome
or
Mozilla Firefox
.
*Disclaimer: The truss designs produced herein are for initial design and estimating purposes only. The calculations presented to do not constitute a fully engineered truss design. The truss manufacturer will calculate final loads, metal plate sizing, member sizing, webs and chord deflections based on local climatic and/or seismic conditions. The truss designs and calculations are for illustrative purposes only. Medeek Design assumes no liability or loss for any designs presented and does not guarantee fitness for use.
Home
Privacy Policy
Contact Us
Site Map
Copyright © 2011-2013 Medeek Design Inc.