Ghostbox

Ghostbox Overview

Make your own GhostBox - using a Raspberry Pi Pico.

The world of electronics and programming is constantly evolving and opening up new opportunities for creative minds to come up with innovative ideas. One such idea is the ghost box project which combines the power of the Raspberry Pi Pico and the versatility of MicroPython to create an interactive and spooky gadget.

Features

The ghost box project features light-up living flame LEDs, a random word generator, and an ouijaboard display. The device is powered by the Raspberry Pi Pico microcontroller, a low-cost, high-performance microcontroller board that is perfect for hobbyists and professionals alike.

Programming

The project is programmed in MicroPython, a lightweight version of the popular Python programming language that is designed for microcontrollers. This makes it easy to develop code for the project, even for those who have limited experience with programming.

Lviving Flame LEDs

The living flame LEDs are one of the most striking features of the ghost box project. These LEDs simulate a flickering flame, adding to the spooky atmosphere of the device.

The random word generator is another fascinating feature of the ghost box project. It uses a list of pre-defined words, which are randomly chosen and displayed on the ouijaboard display. The display is also controlled using the Raspberry Pi Pico and is designed to resemble a traditional ouijaboard.

Display

The ouijaboard display is made using an OLED (Organic Light Emitting Diode) screen, which provides high contrast and clear visibility even in low light conditions. The OLED display is connected to the Raspberry Pi Pico by simply pushing the Pimoroni display pack onto the header pins of the Pico.

The ghost box project is a great example of how creativity and technology can be combined to create something unique and exciting. The Raspberry Pi Pico and MicroPython provide an excellent platform for hobbyists and professionals alike to explore the possibilities of electronics and programming.

If you’re interested in building your own ghost box project, this article will provide the resources you need to help you get started. Whether you’re a beginner or an experienced programmer, you’re sure to find something that will inspire you and help you to create something truly amazing.

Bill of Materials

Total cost around £44 (plus shipping)

Assembly

1. Print out the STL files
2. Cut the power 9v Battery connector off the the LED Living Flame lights, leaving about 5-10cm of cable remaining on the connector
3. Thread the Living Flame LED lights into the two holes at the top section of the Ghostbox
4. Push fit the Living Flame LED lights onto the ghostbox, they should fit snugly. If they are loose, add a spot of super glue to secure
5. Solder a red wire from the VBUS Pin (Pin 40) to the 5v on the buck convertor
6. Solder a blackwire from the GND Pin (Pin 38) to the GND on the buck convertor
7. Mount the Pico onto the Bottom section using 4 of the M2 screws, with the headerpins pointing up
8. Solder the Battery Connector to the Switch and the Switch to the buck convertor.
9. Load the Micropython code from the repository below
10. Check the buck convertor is set to output 5v using a multi-meter and adjust using output voltage using the little potentiometer
11. Add the battery to the connector
12. Place the top section over the bottom section and carefully arrange the wires so they are not trapped
13. Screw the bottom section to the top section using the remaining 4 M2 screws
14. Carefully push the Display Pack onto the header pins
15. Switch on and enjoy!

Wiring

Note - The Living flame LEDS are powered by the 9v battery - just solder the Red wires from the LEDs to the 9v terminal on the buck convertor and the black wire to the GND terminal on the buck convertor.

Gallery