My EasyWeather software doesn't work. When I try to download data it opens and closes. I used it for about three years and it worked fine till now. I used 8.4 version. I installed 9.3 version but this didn't fix the problem. I use a PC, my operating system is Windows 11. How can I fix this probelm? Thank you
Is there a reason why RainRate, Rainfall houarly and Raynfall/day is always at 0?
I'm using tcpdump to capture packets.
On my Easyweather Pro (v5.1.6).
Easyweather 9.3 needs another update, works with win11, but the upload to metservice, cannot be done as their server requires both ID's, Is there anyother software that is compatible with uploads
In version 9.3.1 I'm disappointed that the max/min can't be removed/reset to zero. During set up several tests were run, now that data is showing as high/low and it can't be removed. Everything else appears to be working properly. Reports to Wunderground without any problems.
I get : cannot open database/ invalid pointer. When trying to get data from my EasyWeather 9.5. I think this is the end of my weather station. Any tips?
Colliewalker, I found the same - it has stopped working with a Win 10 updtae sometime in the last year or so.
Any responses/instructions on what to do would be helpful to quite afew users, I guess.
My need is to output data to "wunderground"...
There are no instructions giving help when something does not work alright. And the program does not function properly: the graphic display does not appear, the time is one hour astray.
I have set this weather station as per instructions but the rain gauge is active in windy conditions and has registered 108 mils in three hot dry and gusty days. Can anyone offer some advice to stop this from happening please? Version 8.3
You need to make sure the outdoor kit is very rigidly mounted. The rain gauge is a water see-saw and if the kit oscillates in windy conditions it will tip the see-saw and record that as rainfall.
Thanks for the advice. I'm having the same problem. I have the gauge mounted on a 1.5 m (5ft) 25 mm (1") square ally tube above a 1.8 m (6ft) rigid fence post.
As the wire is quite long, I'm going to try mounting the rain gauge at the bottom of the pole. I'll post what happens. Any other comments appreciated.
Just installed easy weather 8, it will not display outside temp on the graph, only inside temp wind chill and dew point.
Can anyone suggest what to do?
more:
During testing I downloaded latest software 8.2 which also works now. However I can not reset the max min information. It would be nice if somebody took the time to write single finger key stroke directions on how to set up and use the device. Including some comments on the way the device actually reads the information and manipulates the data before it is transmitted to the receiver and then the receiver appears to perform additional manipulation before the computer software also manipulates the information.
I'm using tcpdump to capture packets.
On my Easyweather Pro (v5.1.6).
Any responses/instructions on what to do would be helpful to quite afew users, I guess.
My need is to output data to "wunderground"...
As the wire is quite long, I'm going to try mounting the rain gauge at the bottom of the pole. I'll post what happens. Any other comments appreciated.
Can anyone suggest what to do?
During testing I downloaded latest software 8.2 which also works now. However I can not reset the max min information. It would be nice if somebody took the time to write single finger key stroke directions on how to set up and use the device. Including some comments on the way the device actually reads the information and manipulates the data before it is transmitted to the receiver and then the receiver appears to perform additional manipulation before the computer software also manipulates the information.