Easy No-Sew Applique Tutorial

As I have mentioned in previous posts, it is "birthday season" around here.  My daughter's 12 little friends all have their birthdays within a month of each other.  Well this weekend is the grand finale of all the birthday festivities!

This weekend my friend Danica's little guy, Roaran, will celebrate turning 2 and will finally join his friends in the "2" club!  She is planning an awesome "Thomas the Train" party that I'm sure will be amazing.  She wanted to jazz up his basic train overalls to make them "Thomas" themed and I agreed to help her out with this little project.

This is a simple, inexpensive no-sew (or a little bit of sewing if you want) project.  This would be perfect for your child's jeans, a little jacket, a t-shirt or anything you are wanting to add something to, just to make it a little bit more special.

Easy No-Sew T-Shirt Applique Tutorial

Supplies:

1 pair overalls

1 T-Shirt (whatever theme you like....Thomas, Elmo, Dora, Mickey Mouse)

Fusible Web (WonderUnder or any other brand)

Scissors

Iron

Thread

Directions:

Start with your basic overall.  Danica picked out this super-cute classic train overall.

She then found this "Thomas" shirt at a local children's resale shop in town.  It's a cute shirt, but she (and I) didn't care too much for the fact that it was a tank-top and looked a little too plain for a birthday boy.

I cut the "Thomas" and the wording off of the t-shirt as close to the edge as possible.

I then cut fusible interfacing out to match the shape of each of the cut-outs from the t-shirt.

I ironed the interfacing to the back-side of each of the t-shirt applique pieces (follow the directions for whatever brand of interfacing you use).  Then I took the paper off of the back of the appliques.

I placed the applique pieces where I thought they would look best and ironed them into place. 

I appliqued the picture of Thomas on the front pocket of the overalls and the "Thomas and Friends" onto the back-side.

You can stop after you have ironed on your applique, but I like to take it a step further.  I stitched around each applique piece after ironing, just to increase durability.  If you know anything about toddler boys, they are super-rough on their clothes so this is a good idea if you plan on having your little one wear these after the party.

The nice thing about using knit t-shirt material for the applique is that you don't have to worry about the edges fraying like you would with regular quilting cotton.

Hopefully Danica will be "guest" posting about her fabulous "Thomas" party in the coming weeks!!

Cottage Mama's Note:  The next time you are out at a garage sale or resale shop, look around for t-shirts that could be deconstructed for their applique potential.  Maybe your child likes Elmo or Diego or Barney or simply look for t-shirts that have pretty flowers or designs.  This Thomas shirt was not particularly special, but once I took it apart and added it to the overalls, it became just that!!

Pin It

The Cottage Mama is in the Mommyhood!

I'm so excited that Shannon over at luvinthemommyhood.com has posted this lovely feature/interview about my family, myself and my etsy shop "The Cottage Mama".  Yes, that's right, I have an etsy shop!  I know I haven't officially talked too much about my shop here on the blog, but I just recently got some inventory listed and I'm open for business!! 


I am doing a giveaway for a $25.00 gift certificate to my shop over at luvinthemommyhood.  I would love if you would head over to luvinthemommyhood, check out the interview and enter to win!!  You will also learn lots more about "The Cottage Mama".  While you're over there, take a few minutes to poke around Shannon's blog - she has some wonderful projects, ideas, and gorgeous pictures!

If you would like to keep updated with "The Cottage Mama" become a fan on facebook.  Click here to become a fan! Pin It

Boys.........

If you have been following my blog here for very long, you know that most of the things I post about (when it comes to children) has to do with girls.  I'm sorry, I can't help it, I have two of them!!

Well, I have been working on some birthday presents for my daughters little friends and they happen to be mostly............boys.  I love to make Savannah's little friends handmade gifts for their birthdays.  Now it is not always possible to make ALL of them totally handmade, but I try my best.

I'm a huge fan of making super-hero capes for the little ones, but here are some other gifts I made recently that will be given to my daughter's 2-year old "boyfriends".

The Car Cozy:

 I love this gift idea!  I think this is so perfect for a little guy on the go.  Mom can take this simple "Car Cozy" in her diaper bag or purse and whenever she needs to entertain the little guy, she can pull it out and he can have instant fun! 

I based this design off of the "Car Cozy" tutorial by Homemade by Jill.  So if you are interested in making this gift for someone, I definitely recommend checking out her tutorial - it's great and very thorough.  I did change it up a bit, so I'll let you know what I did.

As you know, I love toys that encourage imaginitive play and this one is perfect.  You've got the street and the different cars - so much fun!

I used brown and yellow felt to make the road.  And used Riley Blake's new "Wheels" line for the fabric to hold the cars.  The light khaki color is a thick cotton twill.

I appliqued a car out of fabric (again, Riley Blake "Wheels") and sewed wheels made from felt to the exterior of the "Car Cozy".

For the exterior, I used a thick denim.  This would be a great idea for recycling a used pair of jeans that you are no longer wearing.

To speed up this project, I used my serger to sew around the entire exterior.  Homemade by Jill's tutorial does not use a serger.  I know many of you don't have a serger, but if you do, I think this is the way to go!

For the tie, I used two pieces of felt ribbon that I got at my local Michael's.

To close the "car cozy" you fold it in half (as you can see, I included my "The Cottage Mama" label).

Then you fold it in half again and secure with the tie.

 I think any little guy would be thrilled to receive this gift - Vroom, Vroom!!!

Charm Square Car Bean Bags:

I included these four bean bags in one my my daughters friends gifts.  The main portion of the gift was a tote with a bunch of outdoor sand toys and I thought these bean bags would make for some additional outdoor fun!

These four bean-bags were all made from charm squares of fabric.  I made one side from Riley Blake "Wheels" fabric.

And on the other side I used a fun polka-dot in "boy" colors.

Again, if you have a serger this makes for a super-simple project.  Just serge three sides of the fabric together, fill with beans, and then serge the fourth side.  I finished all of the corners with fray-check to prevent future fraying.

If you do not have a serger, place the right-sides of the fabric together and stitch three sides (1/2" seam allowance), then turn them right-side out and press your seams.  Fill with beans, and hand-sew the fourth side to close the bean bags.

I used an entire bag of beans for these four bean-bags.


Cottage Mama's Note:  Since this wasn't a full tutorial, if you have any questions about these gifts, feel free to leave me a comment or send me an email. Pin It

Pretty Scrapbook Paper Covered Magazine File ~ Tutorial

I'm in the midst of needing to re-do my sewing/crafting/office space - it needs it - desperately!!  If you came into my house right now I would be so embarrased.  I have a gazillion yards of fabric everywhere and have taken over the entire dining room and office.  I am the type of person that needs my space to be organized and put together in order to feel like I can move ahead and create.......well right now, I should be at a stand-still because it is a disaster!

So in an effort to start to re-do my "studio" (that's what we'll call it.......sounds good, right?), I decided to start with an easy project.  Several years back I had purchased some inexpensive cardboard magazine files from IKEA - these to be exact:

They are only $2.99 for a pack of 5 - a bargain!!  But look at them.......they are screaming for some color.  So here is my overhaul project for these great deal, but not so pretty, magazine files.

Pretty Covered Magazine File Tutorial

Supplies:

-Magazine files

-Pretty scrapbook paper

-Glue

-Scissors or a paper cutter

-Pencil or pen

Directions:

Grab your scrapbook paper.  I used Amy Butler's scrapbook pack so that I would have a bunch of designs and colors that all coordinate and you know how I feel about Amy Butler (love her)!

Get out a sheet of 12 x 12 paper.

Flip your paper over and trace (with your pen or pencil) around the long-side of your magazine file.

This is what it will look like after you have done your tracing.

Use your paper cutter (or scissors) and cut out what you traced.  If you don't have a paper cutter, I highly recommend getting one.  They are pretty inexpensive (especially if you use your 40% off coupon at Joann's or Michael's) and if you plan on doing much crafting at all, it is well-worth the money.

Here is your long front piece cut out and ready to go.

Take your glue and place it all over the side of the file and place your long piece on top (be sure to line it up perfectly).  I just used your basic glue, but the stronger the better.  Another idea is to use Mod Podge for this project - if you are into that sort of thing.

Now you could stop here, as you really will only see the front of the file if you keep these in a bookcase, but I decided to take it a few steps further and cover the entire file box.  For the sides trace each one on another piece of scrapbook paper.

Use the first one you cut out as a template for your second.  You need two in order to cover both sides.

Again, swirl glue all around the side of the file and place your pretty paper on top.

For the other small piece, use a scrap from the first long-piece we cut.   Trace the same as the other pieces.

Here is what the smaller side of the file should look like.

To add your labels, I cut small pieces of neutral cardstock (approx. 1" x 3") to back my printed labels.

For the printed part of the label, I used my label maker (oh how I love my label maker!), but if you don't have one, just print your text out on your computer or hand-write it.

Place your labels all at the same height on the long-side of the file. 

Here is what your pretty magazine file will look like after it is complete.  Looks like it cost a lot more than the 60 cents that I paid for each file, right?

Here are some more files that I did as well in coordinating Amy Butler scrap paper.

These files just make me so happy, now if I could just get the rest of my "studio" to make me this happy!!

Pin It