Heartfelt Wednesday with a Little Creative Embellishments...

Hi!!!  So today I have a purple rose card... The background is a  huge stamp HFC put out this month with the October release and I love it!!  The flowers are hand made, using the stamp and dies from the Blushing Rose collection,  you can click on the following link https://youtu.be/Z8P070kC3oo 

 to learn how to create dimensional roses with this collection. 

 But not only did we get to create with the HFC awesome stamps and dies, we also had a few chipboard pieces from Creative Embellishments!  

here is this weeks card....

Products Used:

HCPC - 3757 Blushing Rose Background Cling Stamp

HCPC - 3752 Classic Rose Cling Stamp

HCD1 - 7110 Classic Rose Die

HCPC - 3546 Classic Leaf Cling Stamp

HCD1 - 736  Classic Leaf Die

Heartfelt Designre paper, "Blushing Rose" collection

other products use:  StampingUp! stamp pad "Eggplant Envy", Tim Holtz "Peeled Paint" distress ink pad, mini flat back pearls, black and white cardstock, foam tape, Stickles "Diamond Dust"

.

Card base 6.25  x 5.25 

Stamp the Blushing Rose Background and cut it down to 5.5 x 4 

From the designer paper cut 5 x 5.75

From Black card stock cut 5.25 x 6

Stamp the background onto the white card stock and color it in with the stamp pad inks mentioned above. I did more of a wash, using a small round water color brush. 

Stamp the second background image on a separate sheet of paper and fussy cut around the words "gift", "courage" and most of the rose buds.  These you will adhere to the first background stamped using the foam tape to make your images pop from the card.

Layer this colored in panel onto the designer paper using foam tape, this will make the whole thing pop. Adhere these two layers to the black panel and finally onto the card base.

Adhere some of the flat back pearls onto part of the stamped image, I added them to the words and to the 3 bullet images on the banner.

Stamp, color and die cut enough petals to make 1 big rose and 2 smaller ones. Do the same with the swirly leaf.

I did not want to cover up too much of the background image so I adhere my flowers to the bottom left hand side of the card.  

Stickle it all to make it look sparkly and your're done.

For more inspiration visit the 

Heart Felt Creation's Blog 

click HERE.

NOW...these from the past 2 weeks have those awesome Creative Embellishment chipboard pieces.
here are peaks...scroll down for more details...
Awesome Butterfly...

Check their site here...

 https://creativeembellishments.com/ 

 The items are clean cut and 

really easy to work with...  

And here is the black bird Cage...that was heat embossed with black embossing powders.

     On the right hand panel of my blog here, is a list of all the ladies in the Heartfelt Design team,

visit them for more inspiration and more from Creative Embellishments.

Thank you for visiting and for your support...

and as always...

Heart felt Wednesday... Long Stem Roses

Hi!! What is new with all of you?  Not much here but the crafting...the roses keep coming... These two long stem roses were especially fun to color.  There are 2 different sizes in the set and they layer really well one over the other..but here let me show you what I mean...
This is my card this week... I just love using the tags, they really make a project pop, no?

 

Products used:

HCD1 - 779 Regal Borders & Pocket Craft Dies

HCD1 - 7113 Blushing Rose Dies

HCPC - 3755 Blushing Rose Stem Cling Stamp

Designer paper 'Blushing Rose' collection

other products used, Chip board butterfly from Creative Embellishment, Stickles in Gold and Star Dust, 3 pearl brads, black card stock, paper crinch tool, Blick markers in Horizon Blue, Celedon Green, Lt Cerulean Blue and  Green Tomatoe.

Start with a card base 7.5 x 6.25 fold in half.  

from black card stock 3.75 x 6.25

from the designer paper 

3.5 x 6

Layer these on card base.

Die cut two boarders from the Regal Borders, cutting the bottom part from the black card stock and the top portion from the designer paper.

Attach these borders to either side and attach to the card base.

Stamp, color and die cut the  rose buds and the foliage. Attach the to the bottom left hand side of the card. I fussy cut one of the small butterflies from the paper collection and centered it on the flower stems.

Die cut 3 of the pre printed tags. I ran mine thorough a paper crimper and attached them to black card stock. Added the pearl brads to attach the tag toppers. Stagger the three tags on the card.

Stickle one of the Creative Embellishment chipboard butterfly and tuck in between the tags.

Attached one of the Sentiment tickets from the collect and added Star Dust stickles to the flowers.

your done...

For my inspiration visit
Heartfelt Creation Inspiration Blog

Thanks for stopping by and for your sweet comments!!!
as always...

New Release...all about the Blushing Rose

Good morning! It's Wednesday ...yay!! Half the week is gone and we have a new Release!!! I am just thrilled with last months and this months stamps and die. Roses!!! Plus I got to work with some chipboard, compliments of "Creative Embellishments".  The bird house I think added a different touch to my card...this is a big card measuring 5 x 7, but here take a peak and tell me what you think...
supplies and instructions below...

PRODUCTS USED:

HCPC-3756 Blushing Rose Swirls Cling Stamp

HCD1-7114 Blushing Rose Swirls Dies

Blushing Rose designer paper collection

other products used:  Creative Embellishments chipboard bird cage, Versa mark embossing ink pad, black embossing powder, Stickles, Spellbinders  5 x 7 Detailed Scallops 4, Versa Mark embossing ink, heat gun, Blick Studio in colors Lilac and Light Periwinkle for the flowers and Olive and Green Tomato for leaves. White and black card stock.

Make a 7 x 5 card base from white card stock.

From the designer paper [solid color] cut a 6.75 x 4.75 panel and layer onto card base.

Now die cut using the Spellbinders die using the biggest of the dies from the black card stock. Layer this onto the card base, then from the designer paper, cut one of the 6 x 4 pre-printed panels and layer this onto the base.

Today I used a bird cage from Creative Embellishment. I stamped it with a Versa mark ink pad and embossed it with black embossing powder.

Adhere it with wet glue to the front of the card.














Stamp, color and die cut some of the roses from the Blushing rose swirls. I stamped two images and then cut one of them apart. I used the rose buds to make the one stamped image look bigger and cover the corner.









 I arranged this around the bottom portion of the bird cage.

Cut one of the Happy Birthday tickets from the designer paper and add it to the upper left hand corner.

Stickle everything you want shinny and you're done.

I hope you enjoy your day today and that you are inspired to create...
visit
HeartFelt Creations
for lots and lots more inspiration and to get your supplies.

Thank you so much for visiting and as always...

Roses done in purple... Heartfelt day.

Stamping is new to me, only a few years ago I started to get deep into it. By that I me an I've been buying and hoarding stamps, but have I truly used them? Nope... I have some still in their new package, so I have to admit that using the Heartfelt stamps and dies has been new experience.  All the stamps are so easy to work with and having the coordinating dies makes each project easy to accomplish.  This week, I worked with purple... a color I seldom use, but I think I might add it to my favorite's list.  This is my card this week... I stamped and colored this rose with StampingUP! purple plumb... first time using them also. lol

HCP1-736 Classic Leaf Die
HCD1-7111 Classic Rose Vine Die
HCPC-3753 Classic Rose Vine Cling Stamp
HCPC-3545 Open Leaf Cling Stamp
Designer paper. "Classic Rose Collection"


Other products used: Spellbinders Nestabilities 4 - Floral Ovals, White card stock, Sheer white ribbon, Stickles, "Diamond Dust", Tim Holtz distress inks in "Peeled Paint", StampinUP! Perfect Plum Purple ink pad.

Start with a 5.75 x 6 card base.

From the designer paper cut a 5.50 x 5.75 and a 5.25 x 5.50 and layer them on the card base.

Using the spellbinders die cut 2 using the larger die one from the white card stock and one from the designer paper, I cut mine from a pink sheet of the designer paper.

Die cut enough petals and leaves to make 1 flower. I used a piece of purple paper from the collection. Made one rose and centered it on the leaf. Added Stickles and set it aside to dray.  The leaves I colored with the Tim Holtz Peeled Paint ink.

Using the Plum Purple ink pad shade the outside of the Spellbinders die and adhere it turned horizontally on the card, then layer the second die cut piece vertically on the card.

On the upper left hand side of the card make a bow using the ribbon and glue the single rose and leaf you previously made, on the bow.

On a piece of white paper, stamp the single rose from the Classic Rose Vines Cling stamp and color it in with the inks mentioned above. Die cut this colored rose image and then stamp and die cut a second piece.
Now, using foam tape adhere one over the other and center it on the card using some more foam tape to give it even more dimension.

Cut one of the pre-printed sentiments, I chose "for my firends," and glue it on the bottom of the rose.

Simple and quick...  you're done.


Thanks so much for watching!!!