Creative Paperclay® air dry modeling material

Monday, September 25, 2017

Make Jewelry Charms with Creative Paperclay®

Hi Friends: Creative Paperclay® can be used to make great lightweight charms for your home-made jewelry pieces. Just roll the clay, stamp into it with your favorite stamp sets, then cut with cookie cutters or metal clay cutters to create charms / pendants to use on necklaces, earrings, or bracelets. Once dry, you can paint them to match your favorite outfits or to give as gifts.

Here are some pictures of the jewelry pieces that I made using Creative Paperclay® charms:

The beads on this last one didn't photograph very well - they are lovely iridescent purple/blue beads that really work well with the purple in the charms.

Please see my video tutorial for full instructions for this project:

Friday, September 22, 2017

Creative Paperclay® Calavera Art

Time to get ready for the holidays starting with Halloween and Day of the Dead. I started by rolling out Creative Paperclay® on a masonite panel then laying a stencil over it and brayering it so the pattern would show well. Then a cast skull was glued to it with soft gel. The edges were then trimmed and smoothed with a small amount of water on my fingers then allowed to dry.

SUPPLIES
Creative Paperclay®
Soft Gel Gloss
Black and buff acrylic paint
Jewelry parts
Fake Flower

Black paint was applied to the surface and allowed to dry before a wash of buff paint was applied. This was followed by gluing jewelry parts and fake flower pedals down.

This would look great on the top of an ofrenda.

If you are going to create an ofrenda for Day of the Dead, here is the 3 level layout. This can all be miniaturized by creating the different ofrenda elements with the paper clay such as fruit, sweets and bottles. Be careful though. One year I made faux chocolates for a heart shape box using the clay and my husband tried to eat one.

Dream in Color!

Darlene Olivia McElroy

Tuesday, September 19, 2017

September's Tip..... Creating Butter Slime with Delight Air Dry Modeling Compound.... by Cindy Porter

Hi Creative Paperclay® fans, it's Cindy here, I am excited to share with you my tip for September... Did you know that you can use Delight Air Dry Modeling Compound to make Butter Slime... What is Butter Slime I hear you ask... well it's the latest craze sweeping through the pre-teens and young teens age bracket... I couldn't really see what all the fuss was about, but I will confess once I had made some it is quite satisfying to just squish and stretch, quite good for the stress levels I think... lol.

Supplies:

Delight Air Dry Modeling Compound
Clear Glue: I used slime glue (available here in Australia) but Elmers Clear Glue is also great

Bowl

Slime Activator: either 1 cup warm water with 1 teaspoon of Borax(Bi-Carb Soda) or Contact Lens Solution

Passion Vivid Ultra Metallic

Now onto a little video on how to make the Slime.... enjoy

thank you for stopping by and joining me here today, I hope you or your kids/grandkids, nieces or nephews will have fun trying out this Slime recipe...

Till next time

Happy Creating

Sunday, September 17, 2017

Making Spooky Spell Bottles with Creative Paperclay®

HELLO! Halloween is just around the corner so I thought what better to make than a Halloween craft? I love creepy crafts, don't you?

These spell bottles are so easy to make and you can decorate them any way you choose. Here is the list of supplies:

Empty bottles and jars

PVA glue

Creative Paperclay®

Acrylic paints

Apple Barrell Antique White

Americana Walnut Gel Stain

Golden Acrylic:

Sculpting tools

Paint brushes

water

Part 1

First you cover the bottle with paper clay, taking care to push down firmly so no air is trapped. Let that dry.
When it is dry you add all the decorations such as the words and the eyeball, using some PVA glue of course.
Put that aside to dry.

You can watch the video below to see how I did this.

Part 2

Now its time to paint!

Apply a coat of gesso. This seals the clay so it doesn't absorb all the paint.
Paint the bottles in whatever color you choose.
Apply a wash of black paint and a wash of red paint.
Wipe off.
Keep going until you are satisfied.
Paint the eye on the Frog Eyes Bottle. I also added some brown stain and green paint to this one.
When dry, varnish.
Add any other embellishments you choose.

You can see how I painted my bottles in the video below.

I do hope you enjoyed this tutorial. Thanks for stopping by!

Suzette

Blog: https://papermachepatch.com

Instagram: https://www.instagram.com/papermachepatch/

Facebook: https://www.facebook.com/papermachepatch/

Pinterest: https://www.pinterest.com/suzettehussey/

YouTube: https://www.youtube.com/channel/UCZcUXwRqMwGyIwT5a4elNUg

Friday, September 15, 2017

Halloween Picture Frame

ImagiMeri's Creations

presents:

A Halloween Picture Frame

Hello Lovely People,

I'm late with my post as I lost my computer last week and all my images. I had to re-do my project and then silly me, I forgot to post it.

To those on the team posting for Friday the 15th, I apologize for adding my post in at the last minute.

This month I'm creating a cool stamped/indented decorated dollar store frame. Supplies used are:

Dollar store frame

Creative PaperClay

Knives

Roller

Stamps

Black, gray and off-white acrylic paint

Metallic paste/paint in violet and yellow/green

Hot glue

Sandpaper

Here are the basic supplies I used and they are listed above, too

First I painted the dollar store frame black, set it aside to dry
and continued on to the clay.

I rolled out my clay to an 1/8th of an inch, as this is my
preferred thickness for crafting.

I proceeded to stamp various images in the clay

Using a knife I cut around each shape, leaving about an
1/8th of an inch border.

More stamping

I then placed the pieces I cut out on a tray and baked them
in a 250 degree oven, turning them over once, during the
45 minute bake time.

I then "trimmed" off all rough edges using an X-acto knife.

Using a small square of sandpaper I sanded around all the
edges of each piece for a cleaner look.

I found a placement for the pieces that I liked.

I then "hot-glued" all the pieces down onto the frame.

Using gray acrylic paint I created a wash by adding
water to the paint. I then coated all the pieces in
the gray wash.

Using "off-white" acrylic paint, I created another
wash by adding water. I then went over the pieces
again after doing the gray.

Using the black acrylic paint I created
yet another wash by adding water. This
created contrast so that the details of the
stamping could be seen.

I then added the violet and yellow/green metallic
paste/paints for highlights.

I inserted a picture of my grandson and voila
it's a really cool picture frame for Halloween.

I hope you enjoy this tutorial and I look forward to hearing from you if you try this.

Hugs,

Meri

Monday, September 11, 2017

Elephant Wonder Tag Featuring Creative Paperclay®

Hi Friends: Did you know that you can make your own Creative Paperclay® molds from favorite objects that you have around the house? It's really easy with a product called ImPRESSive Re-Usable Putty. The Creative Paperclay® design team was given the opportunity to try using this reusable putty with our paperclay. It was great! I chose to create a mold of a favorite elephant pin that belonged to my mom. I followed the directions on the package to prepare the putty, then pressed the elephant pin into the clay, let it harden using the package directions, then removed the pin. I created this great elephant mold that I can use any time I want. And, if I decide that I want to make a mold of something else, all I have to do is reuse the putty with another charm/item that I choose.

Once your mold is ready, you can use Creative Paperclay® to make a clay embellishment to use on your projects. Here's a project that uses my elephant mold with other Wilton molds to make this fun tag:

Here are some detail photos of the cast elephant and flowers, along with the sentiments that I used:

Here's the original pin and the mold that I created:

Directions: Please see my video tutorial for full instructions for how I created the mold and the tag. I do have to confess that, in the middle of filming the tag project, I spilled a large amount of ink on my craft table. So the final background colors changed a bit during the filming. LOL. But, I decided to make the best of the happy (?) accident and just go with the change in the colors.

Supply List:

Creative Paperclay® Modeling Material

ImPRESSive Re-Usable Putty
Prima Marketing ART STONES (Amazon)
PrimaMarketing Mini Art Stones (Amazon)
Prima Marketing Art Alchemy Acrylic Paint, Opal Magic Blue-Gold (Amazon)

Aleene's Tacky Glue (Amazon)

Prima Marketing Copper Art Ingredients Mica Powder (Amazon)

Prima Marketing Designer Stencil, 6 by 6-Inch, Flourish (Amazon)

Wilton Fondant and Gum Paste Silicone Mold, Lace (Amazon)

Manila Tag (SSS)

Stabilo All Pencil - Black (Amazon)

Lindy's Stamp Gang Sprays (Amazon): Brushed Nickel, Opal Sea Oats, Afternoon Delight Denim

Liquitex Professional Gloss Heavy Gel Medium (Amazon)

Liquitex Matte Super Heavy Gel Medium (Amazon) Liquitex Professional Clear Gesso (Amazon)
Prima Marketing Art Alchemy-Antique Brilliance Amethyst Magic (Amazon)
Prima Marketing Art Alchemy-Antique Brilliance Lucky Emerald (Amazon)
Prima Marketing Art Alchemy-Antique Brilliance Mystic Turquoise (Amazon)
Prima Marketing Art Alchemy-Metallique Wax-Rich Copper (Amazon)
Prima Marketing Art Alchemy-Opal Magic Wax-Turquoise Satin (Amazon)
Ranger Adirondack Metallics Acrylic Paint Dabbers, Silver (Amazon)
Tim Holtz Small Talk Stickers (Amazon)
Studio 71 Black Gesso (JoAnn)

Wilton Doilies
Basic Grey Out of Print 6X6 paper pad

Other: cheesecloth, fibers

I hope you enjoyed my project and learned how to use homemade molds in your projects. Thank you so much for stopping by the blog today. Have a great, creative day! -Patti

Friday, September 8, 2017

Shrine with Mica Flakes & Metal Leaf

I am researching info for an article and class on shrines. That inspired me to create one with Creative Paperclay®. I always roll out my clay between layers of wax paper and also let them dry on it. It won't warp this way. I texturized it with a homemade stamp.

SUPPLIES
Creative Paperclay®
Cast objects
Mica Flakes
Acrylic Paints
Stamps
Salt
Metal Leaf and Adhesive size

I sprinkled the mica flakes on to the clay and rolled it in. The edges are left rough.

Next I stamped into the clay and added a cast Buddha. When dry, I sealed it with polymer medium.

A metallic gold wash was added. When dry a burnt umber stain was applied and the alphabet letters were added. The white liquid over the Buddha is adhesive size for the metal leaf. It goes on white. When it turns clear it is ready to use.

I applied the metal leaf and decided I wanted more on the top and bottom for balance. On the Buddha I added a burnt umber stain then I added a floater on the back so it can be hung on a wall with a bit of a shadow.

Dream in Color!

Darlene Olivia McElroy

Pages