This purchase included the fold-out paper instructions, a spool of thread, all the pegs, small charted designs and the half completed piece on the loom, with weft and a thin needle still attached.
I find this an interesting set up, opposed to what we find on looms, in our market today. The only roller, has a "gilt headed tack". To begin, the number of warps required are knotted together, then the warps are split and hinged on the tack. Turn the roll once, then use gilt head tack #2 by placing it into a hole on the outside of the roller edge.
Each warp is separated and placed in a corresponding snotches in the "fret", on each end. The instructions also include a suggestion of using a strong, linen finish thread or silk.
The final step is to secure the opposite end, of the warps, by slipping them, grouped, between the knotch, on base, and plug the hole.
Another thread is cut, for the weft. It is suggested to start weaving on the loom, with the roller furthest from you. Tension is controled by removing the plug, pulling on the warps, then replacing the plug. The tack can also be moved to another hole, in the roller end.
The directions for warp management are summed up by suggesting each warp be knotted, in groups of two, or rewoven back into the finished work.
I can whole heartedly agree, with the manual, stating this loom offers a means to develope mechanical and artistic brain cells. Think I will have this same suggestion, written down and framed, for my bead studio wall. [Like I need a reason to weave on a loom often :) ]
