However, one thing that a table saw is not able to do by itself is position material for straightness, squareness and dimensional accuracy. ... The first is a T-Square type fence.

[Jer] wanted an upgrade for his table saw and came up with what might be the next evolution of the table saw fence. It will always produce a square cut, but unlike the 1970s version, this fence ...

Back in the bad old days, table saw fences were terrible. You would have to measure the top and bottom of the fence before each cut, just to make sure the fence was square to the blade. In the ...

Make sure the table saw blade is lowered all the way, then lay the sled base flat onto the runners, using the table saw fence to keep the plywood as square to the table as possible.

An automated, digitally-controlled, self-calibrating, USA-made table saw fence that saves time, reduces waste, ... If you miss even a 32nd twice, that's a 16th and you're already out a square." ...

What you'll learn: How to check blade alignment using a combination square or dial indicator How to adjust the trunnion or table top depending on your saw model Tips for aligning the rip fence and ...

Guide the table saw fence into the tracks at the front and back of the saw. Don't jam it too hard. It should slide in with little resistance. Square Up Your Table Saw. Using a framing square, ...