Put enough torque on any four-wheel-drive drivetrain ... with even stronger 32-spline shafts, ... for a “Titan Series NP205 Transfer Case Upgrade Kit”: Titan output shafts; twin ...

A custom carbon-fiber driveshaft from QA1 can banish high ... QA1's REV Series 3.2- and 3.7-inch shafts are rated at 700 and 2,000 ... It features a heavy-duty 30-spline slip yoke that fits ...

Our kit included brand new shafts, bearings, seals, hubs, and drive flanges. The spindles were refurbished genuine Spicer parts that were machined to fit the ID of the housing bore. See All 8 Photos ...

My truck seems to run fine, but someone recently asked me if I had the drive shaft balanced. Do I need to get it balanced?Q. During one of the severe snowstorms this past winter, I got hung up on ...

The working angle of a U-joint should be no greater than 6 degrees, and the difference in angles between front and rear U-joints on the same driveshaft should not exceed 1 degree, Sanko says.

Universal joints allow drive shafts to move up and down with the suspension while the shaft is moving so power can be transmitted when the drive shaft isn’t in a straight line between the ...

Ford is recalling nearly a quarter-million heavy duty pickup trucks in the U.S. because the drive shafts can fracture and cause a loss of power. The recall covers certain F-250 and F-350 Super ...

Universal, or "U-joints" allow the drive shaft to flex (and stop it from breaking) when the drive angle changes. There are two types of drive shafts, the Hotchkiss drive and the Torque Tube Drive ...

To resolve the issue, dealers will inspect the drive shafts, replacing either the left or right drive shaft if necessary. Repairs will be done for free, and the recall is expected to begin Feb. 1.

Ford is recalling nearly a quarter-million heavy duty pickup trucks in the U.S. because the drive shafts can fracture and cause a loss of power. The recall covers certain F-250 and F-350 Super ...