Stair stringers for decks and porches are almost ... the stringers are either attached to the joists or to blocking placed between joists. Note that with this technique, the stringers must be ...

To understand stairs, let’s talk about floors. Like many Americans, you might live in a home with a wood-floor system. The ...

First, build a level landing pad for the stair stringers. You don't need to pour ... hole through the subriser, the post and ...

Amateur carpenters who have laid out the cuts in a stair stringer (the zig-zag structural support for the steps) know the queasy feeling that bubbles up at the prospect of this job. There’s the ...

A three-block high wall is 24 inches high ... Now you're ready to cut the stairs' stringers from a piece of treated 2-by-10-inch lumber. Dividing the 301/2 inches by the height of the required ...

To understand stairs, let’s talk about floors. Like many Americans, you might live in a home with a wood-floor system.

In a stair, squeaks can occur between the tread and the risers, or between the tread and the stringers (the angle ... is to place a wood block (ideally a 1-by-2-inch piece about two-thirds as ...

Using a pair of brass stair gauges and a builder’s square to mark the stringer (the zigzag boards the steps and risers attach to) can make the job a little easier. Step 1: Sand the outer edge of ...