
Determine the output of each of the following circuits, assuming that the upper input is 1 and the lower input is 0 What would be the output when the upper input is 0 and the lower input is 1?
a.

Explanation of Solution
Determine the output of the given circuit.
The stated diagram is shown below,
- To find the output of the circuit when the upper input is 1 and the lower input is 0, the diagram contains one XOR gate and inverter, so the Boolean operation of XOR gate and inverter is shown below:
The Boolean XOR operation is shown in table below,
Input 1 | Input 2 | Output |
0 | 0 | 0 |
0 | 1 | 1 |
1 | 0 | 1 |
1 | 1 | 0 |
- First, 0 is the input of inverter which gives the output of inverter and this output of the inverter is the lower input of XOR gate.
The inverter operation is shown in table below,
Input | output |
1 | 0 |
0 | 1 |
- The lower input 0 is converted to 1 through inverter gate that means the lower input of XOR gate is 1.
The inputs of XOR gate are shown in Figure below,
- To represent the output of XOR gate, convert the input of XOR gate through Boolean operation, when both the inputs of XOR gate is 1, then the output of the XOR gate is 0 by Boolean operation XOR table.
Therefore, the required output of the given circuit is “0”.
Determine the output of the given circuit, when the upper input is 0 and the lower input is 1:
- To find the output of the circuit when the upper input is 0 and the lower input is 1, the diagram contains one XOR gate and inverter:
- First, 1 is the input of inverter which gives the output of the inverter and this output of the inverter is the lower input of XOR gate.
- The lower input 1 is converted to 0 through inverter gate, so the lower input of XOR gate is 0.
The inputs of XOR gate are shown in Figure below,
- To represent the output of XOR gate, convert the input of XOR gate through Boolean operation, when both the inputs of XOR gate is 0, then the output of the XOR gate is 1 by Boolean operation XOR table.
Therefore, the required output of the given circuit is “1”.
b.

Explanation of Solution
Determine the output of the given circuit.
The stated diagram is shown below,
- To find the output of the circuit when the upper input is 1 and the lower input is 0, the diagram contains one OR gate and one AND gate, so the Boolean operation of OR gate and one AND gate is shown below:
The Boolean OR operation is shown in table below,
Input 1 | Input 2 | output |
0 | 0 | 0 |
0 | 1 | 1 |
1 | 0 | 1 |
1 | 1 | 1 |
- First, 1 and 0 are the inputs of OR gate that give the output of the OR gate and this output of OR gate is the upper input of AND gate.
The Boolean AND operation is shown in table below,
Input 1 | Input 2 | output |
0 | 0 | 0 |
0 | 1 | 0 |
1 | 0 | 0 |
1 | 1 | 1 |
The upper input 1 and lower input 0 is converted to 1 through OR gate, so the upper input of AND gate is 1.
The inputs of AND gate are shown in Figure below,
- To represent the output of AND gate, convert the input of AND gate through Boolean operation, when the upper input is 1 and lower input is 0 of AND gate, then the output of the AND gate is 0 by Boolean operation AND table.
Therefore, the required output for the given circuit is “0”.
Determine the output of the given circuit, when the upper input is 0 and the lower input is 1:
- To find the output of the circuit when the upper input is 0 and the lower input is 1, the diagram contains one OR gate and one AND gate:
- First, 0 and 1 is the input of OR gate that gives the output of the OR gate which is the upper input of the AND gate.
The upper input 0 and lower input 1 is converted to 1 through OR gate, so the upper input of AND gate is 1.
The inputs of AND gate are shown in Figure below,
Figure (6)
- To represent the output of AND gate, convert the input of AND gate through Boolean operation, when both the inputs of AND gate is 1 then the output of the AND gate is 1 by Boolean operation AND table.
Therefore, the required output for the given circuit is “1”.
c.

Explanation of Solution
Determine the output of the given circuit:
The stated diagram is shown below,
- To find the output of the circuit when the upper input is 1 and the lower input is 0, the diagram contains two XOR gates, so the Boolean operation of XOR gates as shown below:
The Boolean XOR operation is shown in table below,
Input 1 | Input 2 | output |
0 | 0 | 0 |
0 | 1 | 1 |
1 | 0 | 1 |
1 | 1 | 0 |
- First, 1 and 0 are the inputs of XOR gate that give the output of the first XOR gate which is the lower input of second XOR gate.
The upper input 1 and lower input 0 are converted to 1 through XOR gate, so the lower input of second XOR gate is 1.
The inputs of XOR gate are shown in Figure below,
- To represent the output of XOR gate, convert the input of XOR gate through Boolean operation, when both the inputs of XOR gate become 1, then the output of the XOR gate becomes 0 by Boolean operation XOR table.
Therefore, the required output for the given circuit is “0”.
Determine the output of the given circuit, when the upper input is 0 and the lower input is 1:
- To find the output of the circuit when the upper input is 0 and the lower input is 1, the diagram contains two XOR gates:
- First, 0 and 1 are the inputs of first XOR gate that give the output of the first XOR gate which is the lower input of second XOR gate.
The upper input 1 and lower input 0 are converted to 1 through XOR gate, so the lower input of second XOR gate is 1.
The inputs of XOR gate are shown in Figure below,
- To represent the output of XOR gate, convert the input of XOR gate through Boolean operation, when the upper input is 0 and lower input is 1 of XOR gate, then the output of the XOR gate is 1 by Boolean operation XOR table.
Therefore, the required output for the given circuit is “1”.
Want to see more full solutions like this?
Chapter 1 Solutions
Computer Science: An Overview (13th Edition) (What's New in Computer Science)
Additional Engineering Textbook Solutions
SURVEY OF OPERATING SYSTEMS
Introduction To Programming Using Visual Basic (11th Edition)
Modern Database Management
Concepts Of Programming Languages
Electric Circuits. (11th Edition)
Database Concepts (8th Edition)
- (Greedy Algorithms) Describe an efficient algorithm that, given a set {x1, x2, . . ., xn} of points on the real line, determines the smallest set of unit-length closed intervals that contains all of the given points. Argue that your algorithm is correct.arrow_forwardWhat does the value of the top variable indicate in this ArrayStack implementation? What will happen if we call pop on this stack? What value will be returned, and what changes will occur in the array and the top variable? 3. If we push the value "echo" onto the stack, where will it be stored in the array, and what will be the new value of top? 4. Explain why index 0 contains the string "alpha" even though top is currently 3. 5. What would the state of the stack look like (values in the array and value of top) after two consecutive pop 0 operations?arrow_forwardPlease solve and show all work. Suppose there are four routers between a source and a destination hosts. Ignoring fragmentation, an IP datagram sent from source to destination will travel over how many interfaces? How many forwarding tables will be indexed to move the datagram from the source to the destination?arrow_forward
- Please solve and show all work. When a large datagram is fragmented into multiple smaller datagrams, where are these smaller datagrams reassembled into a single large datagram?arrow_forwardPlease solve and show all steps. True or false? Consider congestion control in TCP. When the timer expires at the sender, the value of ssthresh is set to one-half of the last congestion window.arrow_forwardPlease solve and show all work. What are the purposes of the SNMP GetRequest and SetRequest messages?arrow_forward
- Please solve and show all steps. Three types of switching fabrics are discussed in our course. List and briefly describe each type. Which, if any, can send multiple packets across the fabric in parallel?arrow_forwardPlease solve and show steps. List the four broad classes of services that a transport protocol can provide. For each of the service classes, indicate if either UDP or TCP (or both) provides such a service.arrow_forwardPlease solve and show all work. What is the advantage of web caches, and how does it work?arrow_forward
- Please solve and show steps. Consider a DASH system for which there are N video versions (at N different rates and qualities) and N audio versions (at N different rates and qualities). Suppose we want to allow the player to choose at any time any of the N video versions and any of the N audio versions. If we create files so that the audio is mixed in with its matched-rate video and the server sends only one media stream at a given time, how many files will the server need to store (each with a different URL)? If the server instead sends the audio and video streams separately and has the client synchronize the streams, how many files will the server need to store?arrow_forwardPlease solve and show all work. Recall that TCP can be enhanced with SSL to provide process-to-process security services, including encryption. Does SSL operate at the transport layer or the application layer?arrow_forwardPlease solve and show all work. Compute the checksum of the words 1011 1001, 1001 1110, and 0111 1011. Show all work.arrow_forward
- Systems ArchitectureComputer ScienceISBN:9781305080195Author:Stephen D. BurdPublisher:Cengage LearningProgramming Logic & Design ComprehensiveComputer ScienceISBN:9781337669405Author:FARRELLPublisher:CengageOperations Research : Applications and AlgorithmsComputer ScienceISBN:9780534380588Author:Wayne L. WinstonPublisher:Brooks Cole
- Np Ms Office 365/Excel 2016 I NtermedComputer ScienceISBN:9781337508841Author:CareyPublisher:CengageEBK JAVA PROGRAMMINGComputer ScienceISBN:9781305480537Author:FARRELLPublisher:CENGAGE LEARNING - CONSIGNMENTC++ Programming: From Problem Analysis to Program...Computer ScienceISBN:9781337102087Author:D. S. MalikPublisher:Cengage Learning



